Egor I. Zhimulev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Egor I. Zhimulev has a total of 86 co-authors. Here are the top co-authors by number of shared publications:
- Anatoly I. Chepurov
Sobolev Institute of Geology and Mineralogy, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
42 shared publications - Valeri M. Sonin
Sobolev Institute of Geology and Mineralogy, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
33 shared publications N. P. Pokhilenko
Sobolev Institute of Geology and Mineralogy, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
16 shared publicationsA. I. Chepurov
Sobolev Institute of Geology and Mineralogy, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
15 shared publicationsV. M. Sonin
V.S. Sobolev Institute of Geology and Mineralogy SB RAS, Koptyuga Ave. 3, Novosibirsk, Russia
11 shared publicationsA. A. Tomilenko
V.S. Sobolev Institute of Geology and Mineralogy SB RAS, Koptyuga Ave. 3, Novosibirsk, Russia
10 shared publications
Latest Publications
- Open Access
- 7 April 2026
- Published by Altai State University in Izvestiya of Altai State University
- No. 1(147),p. 63-70
Resistance to Graphitization of Impact Diamonds from the Popigai Astrobleme under 6 GPa and 1600-2250 °C
The paper presents the results of a study of the influence of temperature ranging from 1600 to 2250 °C under pressure of 6 GPa on the graphitization process of lonsdaleite-containing impact diamonds from the Popigai astrobleme. A comparison of the thermal stability of light type 1 impact diamonds (without graphite inclusions, lonsdaleite 0-25 %) and black type 2 impact diamonds (lonsdaleite 40-45 % with different ratios of graphite and diamond) from the Popigai astrobleme shows that type 1 impact diamonds are more resistant to thermobaric effects under high pressure conditions than black type 2 diamonds. Experiments at high P-T parameters reveal two main types of graphite structures that appear in type 1 diamonds according to Raman spectroscopy data: newly formed highly ordered and low-ordered (amorphous) graphites. It is likely that the presence of inclusions (relics) of the original graphite, cracks and inclusions of other phases including the fluid phase (air) in type 2 impact diamonds, initiates graphitization inside the samples following a mechanism similar to graphitization on the surface of crystals. It is necessary to sort impact diamonds according to their graphite content for use in diamond tools, considering the different thermal stability of impact diamonds.
- 7 April 2026
- Published by Altai State University in Izvestiya of Altai State University
- No. 1(147),p. 63-70
Open AccessResistance to Graphitization of Impact Diamonds from the Popigai Astrobleme under 6 GPa and 1600-2250 °C
The paper presents the results of a study of the influence of temperature ranging from 1600 to 2250 °C under pressure of 6 GPa on the graphitization process of lonsdaleite-containing impact diamonds from the Popigai astrobleme. A comparison of the thermal stability of light type 1 impact diamonds (without graphite inclusions, lonsdaleite 0-25 %) and black type 2 impact diamonds (lonsdaleite 40-45 % with different ratios of graphite and diamond) from the Popigai astrobleme shows that type 1 impact diamonds are more resistant to thermobaric effects under high pressure conditions than black type 2 diamonds. Experiments at high P-T parameters reveal two main types of graphite structures that appear in type 1 diamonds according to Raman spectroscopy data: newly formed highly ordered and low-ordered (amorphous) graphites. It is likely that the presence of inclusions (relics) of the original graphite, cracks and inclusions of other phases including the fluid phase (air) in type 2 impact diamonds, initiates graphitization inside the samples following a mechanism similar to graphitization on the surface of crystals. It is necessary to sort impact diamonds according to their graphite content for use in diamond tools, considering the different thermal stability of impact diamonds.
- 22 February 2024
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 26 (11) , 1583-1589
Synthesis of diamond from polycyclic aromatic hydrocarbons (anthracene) in the presence of an Fe,Ni-melt at 5.5 GPa and 1450 °C
Synthesis of diamond from anthracene in an Fe,Ni-melt at 5.5 GPa and 1450 °C.
- 22 February 2024
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 26 (11) , 1583-1589
Synthesis of diamond from polycyclic aromatic hydrocarbons (anthracene) in the presence of an Fe,Ni-melt at 5.5 GPa and 1450 °C
Synthesis of diamond from anthracene in an Fe,Ni-melt at 5.5 GPa and 1450 °C.
- 1 December 2023
- Published by Geological Society of South Africa in South African Journal of Geology
- Vol. 126 (4) , 529-538
Dissolution of synthetic diamonds to produce morphologies similar to natural diamonds: an experimental study
The results on dissolution of flat-faced synthetic diamond crystals of octahedral habit in an Fe-Ni-S melt at 4.0 GPa and 1 400°C are presented. It has been established that the resulting diamond morphology is similar to some natural kimberlitic diamonds and follows the particular sequence: flat-faced octahedron – laminar octahedron – trisoctahedroid with parallel striations in the direction (“O1-D1”). Comparing the obtained results with earlier experimental works it is concluded that oxidisation of octahedral diamonds by means of ditrigonal etching layers and formation of tetrahexahedroid form is a result of diamond interaction with the fluidised kimberlite magma. We suggest that formation of octahedral diamonds with trigonal etching layers does not occur in kimberlite magma, and that diamonds of the O1-D1 morphological series avoided natural oxidation in kimberlite magma, but, like flat-faced octahedrons, were enclosed within xenoliths. Most probably, this dissolution process took place in the mantle prior to their capture by kimberlite. The results support an idea that metal-sulphide melts could be considered not only as a growth place for the world’s largest Cullinan-like diamonds found in South Africa (CLIPPIR type), but also as a mantle agent producing crystal morphologies typical for common kimberlitic diamonds: it depends upon carbon content in metal-sulphide melt – with supersaturation of the melt, the growth of diamond occurs while at the undersaturation conditions the dissolution begins.
- 1 December 2023
- Published by Geological Society of South Africa in South African Journal of Geology
- Vol. 126 (4) , 529-538
Dissolution of synthetic diamonds to produce morphologies similar to natural diamonds: an experimental study
The results on dissolution of flat-faced synthetic diamond crystals of octahedral habit in an Fe-Ni-S melt at 4.0 GPa and 1 400°C are presented. It has been established that the resulting diamond morphology is similar to some natural kimberlitic diamonds and follows the particular sequence: flat-faced octahedron – laminar octahedron – trisoctahedroid with parallel striations in the direction (“O1-D1”). Comparing the obtained results with earlier experimental works it is concluded that oxidisation of octahedral diamonds by means of ditrigonal etching layers and formation of tetrahexahedroid form is a result of diamond interaction with the fluidised kimberlite magma. We suggest that formation of octahedral diamonds with trigonal etching layers does not occur in kimberlite magma, and that diamonds of the O1-D1 morphological series avoided natural oxidation in kimberlite magma, but, like flat-faced octahedrons, were enclosed within xenoliths. Most probably, this dissolution process took place in the mantle prior to their capture by kimberlite. The results support an idea that metal-sulphide melts could be considered not only as a growth place for the world’s largest Cullinan-like diamonds found in South Africa (CLIPPIR type), but also as a mantle agent producing crystal morphologies typical for common kimberlitic diamonds: it depends upon carbon content in metal-sulphide melt – with supersaturation of the melt, the growth of diamond occurs while at the undersaturation conditions the dissolution begins.
- Open Access
- 1 November 2023
- Published by Pleiades Publishing Ltd in Doklady Earth Sciences
- Vol. 513 (1) , 1250
Erratum to: Experimental Justification of the Influence of S and Ni on Crystallization of Low-Nitrogen Diamonds in a Melt of Fe at High Pressure
An Erratum to this paper has been published: https://doi.org/10.1134/S1028334X23050070
- 1 November 2023
- Published by Pleiades Publishing Ltd in Doklady Earth Sciences
- Vol. 513 (1) , 1250
Open AccessErratum to: Experimental Justification of the Influence of S and Ni on Crystallization of Low-Nitrogen Diamonds in a Melt of Fe at High Pressure
An Erratum to this paper has been published: https://doi.org/10.1134/S1028334X23050070
- Open Access
Porous Natural Diamond with Embedded Metal (Pt0.50–Co0.50)
Natural diamond crystals with a highly porous surface were used as substrates for synthesizing single-phase bimetallic Pt–Co nanoparticles at temperatures of 500 °C and 800 °C. The metal nanoparticles inside the pores were determined to take the form of single-phase Pt0.50Co0.50 solid solutions with different degrees of superstructure ordering. A detailed characterization of both nanoalloys revealed a tetragonal symmetry with a space group, P4/mmm. For the sample obtained at 500 °C, the lattice parameters were a = 2.673(2), c = 3.735(3) Å, and c/a = 1.397(1); for the samples obtained at 800 °C, the parameters were—a = 2.688(2), c = 3.697(3) Å, and c/a = 1.375(1). Within the experimental parameters, no significant chemical interaction of the diamond with the Pt–Co particles was identified. The results demonstrate a strong anchoring effect of the metallic material within the etching pores. The successful synthesis of bimetallic Pt–Co particles embedded inside the caverns can facilitate a study of their magnetic properties. The presence of Pt–Co in specific diamond compositions can also be used for marking diamond crystals as a means for their subtle identification, as well as confirming the possibility of capturing significant amounts of metal along with diamonds during their dissolution in the deep Earth.
Open AccessPorous Natural Diamond with Embedded Metal (Pt0.50–Co0.50)
Natural diamond crystals with a highly porous surface were used as substrates for synthesizing single-phase bimetallic Pt–Co nanoparticles at temperatures of 500 °C and 800 °C. The metal nanoparticles inside the pores were determined to take the form of single-phase Pt0.50Co0.50 solid solutions with different degrees of superstructure ordering. A detailed characterization of both nanoalloys revealed a tetragonal symmetry with a space group, P4/mmm. For the sample obtained at 500 °C, the lattice parameters were a = 2.673(2), c = 3.735(3) Å, and c/a = 1.397(1); for the samples obtained at 800 °C, the parameters were—a = 2.688(2), c = 3.697(3) Å, and c/a = 1.375(1). Within the experimental parameters, no significant chemical interaction of the diamond with the Pt–Co particles was identified. The results demonstrate a strong anchoring effect of the metallic material within the etching pores. The successful synthesis of bimetallic Pt–Co particles embedded inside the caverns can facilitate a study of their magnetic properties. The presence of Pt–Co in specific diamond compositions can also be used for marking diamond crystals as a means for their subtle identification, as well as confirming the possibility of capturing significant amounts of metal along with diamonds during their dissolution in the deep Earth.
- Open Access
- 16 May 2023
- Published by Pleiades Publishing Ltd in Doklady Earth Sciences
- Vol. 508 (1) , 12-16
Experimental Justification of the Influence of S and Ni on Crystallization of Low-Nitrogen Diamonds in a Melt of Fe at High Pressure
Based on analysis of the results of the synthesis and growth of diamonds in metal-sulfide melts at a high pressure, the cause of the crystallization of low-nitrogen diamond crystals is substantiated. The introduction of sulfur into an iron melt leads to a decrease in the solubility of nitrogen, which, in turn, leads to a decrease in the content of nitrogen atoms in the melt and the probability of their capture by growing diamond crystals in the form of a structural impurity. The addition of nickel reduces the melting point of the growth system, increases the amount of melt, and, accordingly, facilitates the dissociation of molecular nitrogen into separate atoms, which are captured as a structural impurity by diamonds during their growth.
- 16 May 2023
- Published by Pleiades Publishing Ltd in Doklady Earth Sciences
- Vol. 508 (1) , 12-16
Open AccessExperimental Justification of the Influence of S and Ni on Crystallization of Low-Nitrogen Diamonds in a Melt of Fe at High Pressure
Based on analysis of the results of the synthesis and growth of diamonds in metal-sulfide melts at a high pressure, the cause of the crystallization of low-nitrogen diamond crystals is substantiated. The introduction of sulfur into an iron melt leads to a decrease in the solubility of nitrogen, which, in turn, leads to a decrease in the content of nitrogen atoms in the melt and the probability of their capture by growing diamond crystals in the form of a structural impurity. The addition of nickel reduces the melting point of the growth system, increases the amount of melt, and, accordingly, facilitates the dissociation of molecular nitrogen into separate atoms, which are captured as a structural impurity by diamonds during their growth.
- Open Access
Impact of Solid Hydrocarbon on the Composition of Fluid Phase at the Subduction (Experimental Simulation)
Experiments conducted in the olivine–serpentine–anthracene–metal (FeNi) system have shown that the recrystallization of olivines occurs under substantially reduced conditions with active participation of hydrocarbons, especially paraffins; moreover, their amount increases with increasing pressure and temperature. During the decomposition of serpentine, a large amount of water is released; therefore, the fluid at relatively low P-T parameters (2 GPa, 1100 °C) has mainly water–hydrocarbon composition. With an increase in pressure up to 3–4.5 GPa and temperature up to 1300–1400 °C, the composition of the fluid changes greatly towards an increase in the relative amount of hydrocarbons, while the main share is occupied by light (C1–C4) aliphatic hydrocarbons. Therefore, a biogenic material with a carbon–hydrogen composition can make a certain contribution to the carbon budget in subduction processes when falling into the subduction zones and may affect the oxygen fugitivity in the subducted slab.
Open AccessImpact of Solid Hydrocarbon on the Composition of Fluid Phase at the Subduction (Experimental Simulation)
Experiments conducted in the olivine–serpentine–anthracene–metal (FeNi) system have shown that the recrystallization of olivines occurs under substantially reduced conditions with active participation of hydrocarbons, especially paraffins; moreover, their amount increases with increasing pressure and temperature. During the decomposition of serpentine, a large amount of water is released; therefore, the fluid at relatively low P-T parameters (2 GPa, 1100 °C) has mainly water–hydrocarbon composition. With an increase in pressure up to 3–4.5 GPa and temperature up to 1300–1400 °C, the composition of the fluid changes greatly towards an increase in the relative amount of hydrocarbons, while the main share is occupied by light (C1–C4) aliphatic hydrocarbons. Therefore, a biogenic material with a carbon–hydrogen composition can make a certain contribution to the carbon budget in subduction processes when falling into the subduction zones and may affect the oxygen fugitivity in the subducted slab.
- Open Access
- 28 March 2023
- Published by Altai State University in Izvestiya of Altai State University
- No. 1(129),p. 44-48
Synthesis of Pyrope Garnet with High Samarium Content at 5 GPa and 1300 °C
В природных гранатах, ассоциирующих с алмазом, часто наблюдается повышенное содержание «легких» редкоземельных элементов, в особенности самария. При этом существуют различные оценки состава среды кристаллизации. Экспериментальных данных по синтезу хромистых гранатов, содержащих редкоземельные элементы, пока немного. Эксперименты проведены на многопуансонном аппарате типа «разрезная сфера» (БАРС) при давлении 5 ГПа и температуре 1300 °С. Ячейку высокого давления изготавливали из оксидов Zr02 и СаО. В качестве нагревателя применяли трубчатый графитовый элемент. Погрешность измерения давления и температуры составляла ± 0.2 ГПа и ± 25 °С. Исходными материалами для экспериментов были природный серпентин-антиго-рит, хромистая шпинель и корунд. В результате экспериментов синтезированы кристаллы пиропа с высоким содержанием самария в интервале 0.77-2.34 мас.% Sm203. Выполненное исследование демонстрирует, что при взаимодействии компонентов в системе серпентин-хромит-корунд-Sm в присутствии флюида происходит кристаллизация пиропо-вого граната, содержание самария в котором может достигать высоких значений, при этом превышать известные концентрации Sm в природных гранатах, ассоциирующих с алмазом.
- 28 March 2023
- Published by Altai State University in Izvestiya of Altai State University
- No. 1(129),p. 44-48
Open AccessSynthesis of Pyrope Garnet with High Samarium Content at 5 GPa and 1300 °C
В природных гранатах, ассоциирующих с алмазом, часто наблюдается повышенное содержание «легких» редкоземельных элементов, в особенности самария. При этом существуют различные оценки состава среды кристаллизации. Экспериментальных данных по синтезу хромистых гранатов, содержащих редкоземельные элементы, пока немного. Эксперименты проведены на многопуансонном аппарате типа «разрезная сфера» (БАРС) при давлении 5 ГПа и температуре 1300 °С. Ячейку высокого давления изготавливали из оксидов Zr02 и СаО. В качестве нагревателя применяли трубчатый графитовый элемент. Погрешность измерения давления и температуры составляла ± 0.2 ГПа и ± 25 °С. Исходными материалами для экспериментов были природный серпентин-антиго-рит, хромистая шпинель и корунд. В результате экспериментов синтезированы кристаллы пиропа с высоким содержанием самария в интервале 0.77-2.34 мас.% Sm203. Выполненное исследование демонстрирует, что при взаимодействии компонентов в системе серпентин-хромит-корунд-Sm в присутствии флюида происходит кристаллизация пиропо-вого граната, содержание самария в котором может достигать высоких значений, при этом превышать известные концентрации Sm в природных гранатах, ассоциирующих с алмазом.
- 1 March 2023
- Published by The Russian Academy of Sciences in Доклады РОССИЙСКОЙ АКАДЕМИИ НАУК. Науки о Земле
- Vol. 509 (1) , 56-61
EXPERIMENTAL JUSTIFICATION OF THE INFLUENCE OF S AND Ni ON CRYSTALLIZATION OF LOW-NITROGEN DIAMONDS IN A MELT OF Fe AT HIGH PRESSURE
Based on the analysis of the results on the synthesis and growth of diamonds in metal-sulfide melts at high pressure, the reason for the crystallization of low-nitrogen diamond crystals is substantiated. The introduction of sulfur into the iron melt leads to a decrease in the solubility of nitrogen, which, in turn, leads to a decrease in the content of nitrogen atoms in the melt and the probability of their capture by growing diamond crystals in the form of a structural impurity. The addition of nickel lowers the melting point of the growth system, increases the amount of melt, and, accordingly, promotes the dissociation of molecular nitrogen into individual atoms, which are captured by diamonds during growth as a structural impurity.
- 1 March 2023
- Published by The Russian Academy of Sciences in Доклады РОССИЙСКОЙ АКАДЕМИИ НАУК. Науки о Земле
- Vol. 509 (1) , 56-61
EXPERIMENTAL JUSTIFICATION OF THE INFLUENCE OF S AND Ni ON CRYSTALLIZATION OF LOW-NITROGEN DIAMONDS IN A MELT OF Fe AT HIGH PRESSURE
Based on the analysis of the results on the synthesis and growth of diamonds in metal-sulfide melts at high pressure, the reason for the crystallization of low-nitrogen diamond crystals is substantiated. The introduction of sulfur into the iron melt leads to a decrease in the solubility of nitrogen, which, in turn, leads to a decrease in the content of nitrogen atoms in the melt and the probability of their capture by growing diamond crystals in the form of a structural impurity. The addition of nickel lowers the melting point of the growth system, increases the amount of melt, and, accordingly, promotes the dissociation of molecular nitrogen into individual atoms, which are captured by diamonds during growth as a structural impurity.
- Open Access
HPHT-Treated Impact Diamonds from the Popigai Crater (Siberian Craton): XRD and Raman Spectroscopy Evidence
Phase change and graphitization of diamonds from the Popigai impact crater (Krasnoyarsk Territory, Siberian platform, Russia) exposed to high-pressure high-temperature (HPHT) conditions of 5.5 GPa and 2000–2200 °C are studied by Raman spectroscopy and X-ray diffractometry (XRD). Light-color diamonds of type 1, free from inclusions, with 0 to 10 % lonsdaleite, are more resistant to HPHT effects than dark diamonds of type 2 rich in lonsdaleite and graphite. The lonsdaleite/diamond ratios in lonsdaleite-bearing impact diamonds become smaller upon annealing, possibly because lonsdaleite transforms to cubic diamond simultaneously with graphitization. Therefore, lonsdaleite is more likely a structure defect in diamond than a separate hexagonal phase.
Open AccessHPHT-Treated Impact Diamonds from the Popigai Crater (Siberian Craton): XRD and Raman Spectroscopy Evidence
Phase change and graphitization of diamonds from the Popigai impact crater (Krasnoyarsk Territory, Siberian platform, Russia) exposed to high-pressure high-temperature (HPHT) conditions of 5.5 GPa and 2000–2200 °C are studied by Raman spectroscopy and X-ray diffractometry (XRD). Light-color diamonds of type 1, free from inclusions, with 0 to 10 % lonsdaleite, are more resistant to HPHT effects than dark diamonds of type 2 rich in lonsdaleite and graphite. The lonsdaleite/diamond ratios in lonsdaleite-bearing impact diamonds become smaller upon annealing, possibly because lonsdaleite transforms to cubic diamond simultaneously with graphitization. Therefore, lonsdaleite is more likely a structure defect in diamond than a separate hexagonal phase.