ANAiqing Ni

Aiqing Ni

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aiqing Ni has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of Arctic Service Conditions on the Mechanical Properties and Damage Behavior of Glass Fiber and Carbon/Glass Hybrid-Reinforced Vinyl Ester Composites for Marine Applications

    by Lijun Wang, Yueming Zhou, Weiping He, Xin Fu, Zhiyong Zhao, Xingyue Zhen, Bin Yang, Jihui Wang, Aiqing Ni

    Glass fiber-reinforced polymer (GFRP) and carbon/glass hybrid fiber-reinforced polymer (HFRP) laminates with two vinyl ester resin systems were investigated to evaluate their early environmental response, residual mechanical performance, and damage behavior after moisture-assisted low-temperature exposure and freeze–thaw cycling (FTC). After 150 days of moisture preconditioning, the conditioned specimens were exposed to −50 °C or subjected to FTC between −50 °C and 22 °C. Tensile, compressive, flexural, in-plane shear, interlaminar shear, and compression-after-impact (CAI) tests were conducted. Fourier transform infrared spectroscopy (FTIR), dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM) were used to examine chemical structure, thermomechanical response, and damage morphology. FTIR spectra showed no obvious changes in the characteristic absorption bands of the vinyl ester matrix. DMA showed condition-dependent changes in thermomechanical behavior, with the largest decrease in glass transition temperature reaching 5.5 °C after Condition 3. Tensile and in-plane shear properties were largely retained, whereas compressive, flexural, interlaminar shear, and CAI properties were more sensitive; the largest CAI strength loss was 19.1%. Hybrid stacking affected the property retention and damage tolerance of the laminates under the designed FTC condition. SEM observations identified interfacial debonding, matrix microcracking, and interlaminar crack growth as the main damage features.


  • Open Access

    MBL-TransUNet: Enhancing Mesostructure Segmentation of Textile Composite Images via Multi-Scale Feature Fusion and Boundary Guided Learning

    by Hang Qi, Aiqing Ni, Yuwei Feng, Yunsong Peng, Bin Yang, Guo Li, Jihui Wang

    Accurate segmentation is essential for creating digital twins based on volumetric images for high fidelity composite material analysis. Conventional techniques typically require labor-intensive and time-consuming manual effort, restricting their practical use. This paper presents a deep learning model, MBL-TransUNet, to address challenges in accurate tow-tow boundary identification via a Boundary-guided Learning module. Fabrics exhibit periodic characteristics; therefore, a Multi-scale Feature Fusion module was integrated to capture both local details and global patterns, thereby enhancing feature fusion and facilitating the effective integration of information across multiple scales. Furthermore, BatchFormerV2 was used to improve generalization through cross-batch learning. Experimental results show that MBL-TransUNet outperforms TransUNet. MIoU improved by 2.38%. In the zero-shot experiment, MIoU increased by 4.23%. The model demonstrates higher accuracy and robustness compared to existing methods. Ablation studies confirm that integrating these modules achieves optimal segmentation performance.


  • Open Access

    Preparation of Flame-Retardant Glass Fiber-Reinforced Epoxy by Vacuum-Assisted Resin Infusion Process with Deep Eutectic Point Curing Agent

    by Changzeng Wang, Jihui Wang, Pengyu Li, Chengxin Xu, Shuxin Li, Aiqing Ni

    Enhancing the flame resistance of fiber-reinforced epoxy resins will broaden its potential applications. However, the inclusion of a flame retardant in epoxy resins with a curing agent shortens the process, posing a challenge for the production of flame-retardant composites. In this work, the process performance of flame-retardant epoxy resins was improved by using deep eutectic solvents (DES) as the curing agent. The gelation time and viscosity curves show that a flame-retardant epoxy with DES has excellent processability at 60 °C with a viscosity of 430 mPa∙s. Then, the manufacturing and experimental investigation of the flame-retardant epoxy (E-M) and composite (E-MC) were conducted. The fire retardancy of E-M is rated V0 according to the UL-94 test, and its limiting oxygen index (LOI) value is 36.8%. The mechanical performance of the epoxy resins is also slightly improved by the addition of the flame retardant. E-MC was successfully prepared by vacuum assisted resin infusion (VARI) with a V2 rating in the UL94 test, and extraordinary mechanical properties were achieved. The remarkable flame retardancy and mechanical properties of both the matrix and the composites demonstrate that the DES curing agent can homogenously disperse in and cure the epoxy resins. This work provides an inexpensive yet effective solution for manufacturing flame retardant composites by VARI, enabling the application of a range of flame retardants to composite materials.


  • Open Access

    The Flame Retardant and Mechanical Properties of the Epoxy Modified by an Efficient DOPO-Based Flame Retardant

    by Pengyu Li, Jihui Wang, Changzeng Wang, Chengxin Xu, Aiqing Ni

    Currently, the mechanical performance reduction caused by excessive phosphorus content in the halogen-free flame-retardant EP has been an obstacle to its extensive application. This study presents the effective synthesis of a novel flame-retardant BDD with great efficiency, achieving an optimum phosphorus level of merely 0.25 wt %. The structure of BDD was verified by FTIR, 1H NMR, 31P NMR and XPS spectra. To investigate the flame-retardant properties of BDD, several EPs with various phosphorus levels were synthesized. The addition of phosphorus to the EP significantly increases its LOI value from 25.8% to 33.4% at a phosphorus level of 0.25 wt%. Additionally, the resin achieves a V-0 grade in the UL 94 test. The P-HRR and THR of the modified resin measured by the cone calorimeter are also significantly reduced. At the same time, the addition of a modest quantity of BDD has a minimal impact on the mechanical properties of epoxy resin. This study shows that the removal of hydroxyl groups significantly enhances the fire resistance of phosphate-based flame retardants, thereby providing a novel approach to synthesizing efficient flame retardants.


  • Open Access

    A Simplified Computational Strategy Focused on Resin Damage to Study Matrix Cracking of The Cross-Ply Laminates Under Uniaxial Tension Load

    by Liangliang Sun, Jihui Wang, Haixiao Hu, Aiqing Ni

    Transverse cracking is probably the first and most dominant mode of damage in composite materials. In this paper, transverse cracking of cross-ply [02/90n]s (n = 2,3,4) laminates under uniaxial tension load was studied by means of experimental and numerical methods. In the numerical simulations, a simplified computational strategy only focusing on the damage of the resin was proposed and the mechanical response of the cracking cross-ply laminates was studied by finite element analysis of multi-scale representative volume elements (RVEs). In the RVEs, the longitudinal 0° plies were represented by macro-scale, homogeneous, orthotropic elastic solids while the 90° plies were modeled by the discrete fibers and the surrounding matrix resin in micro-scale. Based on researching the critical longitudinal mechanical strain ε x which initiates the cracks, the in-situ transverse ply strength and the stiffness degradation of the transverse plies, the simplified computational strategy proposed was proven correct. In addition, the crack initiation is sensitive to residual stress. Higher process-induced residual stress levels are dangerous to laminates, leading to early crack initiation.


  • Open Access

    Synthesis of a Novel Phosphorous-Nitrogen Based Charring Agent and Its Application in Flame-retardant HDPE/IFR Composites

    by Junlei Chen, Jihui Wang, Aiqing Ni, Hongda Chen, Penglong Shen

    In this work, a novel phosphorous–nitrogen based charring agent named poly(1,3-diaminopropane-1,3,5-triazine-o-bicyclic pentaerythritol phosphate) (PDTBP) was synthesized and used to improve the flame retardancy of high-density polyethylene (HDPE) together with ammonium polyphosphate (APP). The results of Fourier transform infrared spectroscopy (FTIR) and 13C solid-state nuclear magnetic resonance (NMR) showed that PDTBP was successfully synthesized. Compared with the traditional intumescent flame retardant (IFR) system contained APP and pentaerythritol (PER), the novel IFR system (APP/PDTBP, weight ratio of 2:1) could significantly promote the flame retardancy, water resistance, and thermal stability of HDPE. The HDPE/APP/PDTBP composites (PE3) could achieve a UL-94 V-0 rating with LOI value of 30.8%, and had a lower migration percentage (2.2%). However, the HDPE/APP/PER composites (PE5) had the highest migration percentage (4.7%), lower LOI value of 23.9%, and could only achieve a UL-94 V-1 rating. Besides, the peak of heat release rate (PHRR), total heat release (THR), and fire hazard value of PE3 were markedly decreased compared to PE5. PE3 had higher tensile strength and flexural strength of 16.27 ± 0.42 MPa and 32.03 ± 0.59 MPa, respectively. Furthermore, the possible flame-retardant mechanism of the APP/PDTBP IFR system indicated that compact and continuous intumescent char layer would be formed during burning, thus inhibiting the degradation of substrate material and improving the thermal stability of HDPE.


  • Top Cited Papers

    Recycling and reuse of composite materials for wind turbine blades: An overview

    by Junlei Chen, Jihui Wang, Aiqing Ni

    Based on the increasing number of end of life wind turbine blades and the emphasis on resource conservation and environmental protection, more and more attention has been paid to the recycling and reuse of thermoset composite materials for wind turbine blades. This paper gives an overview of the main recycling technologies and reuse of recycled products. Current recycling technology still needs more work to move from laboratory stage to commercial production. Cheaper, less polluting, and more efficient recycling technologies are needed, along with remanufacturing technologies for high performance products can be obtained to expand the market for recycled materials. In addition, new environmentally friendly blade materials should be designed from the source, using natural fiber, modified thermosetting resin and recyclable thermoplastic resin, which make wind energy a truly clean energy.


  • Open Access

    Process-Induced Stress and Deformation of Variable-Stiffness Composite Cylinders During Curing

    by Guiming Zhang, Jihui Wang, Aiqing Ni

    Predicting and controlling process-induced deformation of composites during cure can play a significant role in ensuring the accuracy of manufacture and assembly of composite structures. In this paper the parametric investigation on the process-induced stress and deformation of variable-stiffness composite cylinders was presented. The Kamal model was used to simulate the cure kinetic for carbon/epoxy prepreg. A cure hardening instantaneously linear elastic (CHILE) constitutive model was adopted to determine the modulus of matrix resin. Self-consistent micro-mechanical models were employed to represent the mechanical properties and behaviors of the lamina. The three-dimensional model of a variable-stiffness composite cylinder was established using a linear fiber angle variation. The influence of the inner radius, the fiber end angle and the thickness on the stress and deformation of the variable-stiffness cylinder was evaluated using ABAQUS. The results show that the maximum stress increases with increases of the inner radius, the fiber end angle and the thickness. The inner radius of the cylinder have little effect on deformation, the deformation increases as the fiber end angle and the thickness increases. The present model and method can provide a useful tool for prediction of variable-stiffness composite cylinders.