EMElizabeth L. Martin

Elizabeth L. Martin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Elizabeth L. Martin has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Correction: Microfluidic devices powered by integrated elasto-magnetic pumps

    by Jacob L. Binsley, Elizabeth L. Martin, Thomas O. Myers, Stefano Pagliara, Feodor Y. Ogrin

    Correction for ‘Microfluidic devices powered by integrated elasto-magnetic pumps’ by Jacob L. Binsley et al., Lab Chip, 2020, 20, 4285–4295, DOI: 10.1039/D0LC00935K.


  • Open Access

    Elasto-Magnetic Pumps Integrated within Microfluidic Devices

    by Jacob L. Binsley, Elizabeth L. Martin, Thomas O. Myers, Stefano Pagliara, Feodor Y. Ogrin

    Many lab-on-a-chip devices require a connection to an external pumping system in order to perform their function. While this is not problematic in typical laboratory environments, it is not always practical when applied to point-of-care testing, which is best utilized outside of the laboratory. Therefore, there has been a large amount of ongoing research into producing integrated microfluidic components capable of generating effective fluid flow from on-board the device. This research aims to introduce a system that can produce practical flow rates, and be easily fabricated and actuated using readily available techniques and materials. We show how an asymmetric elasto-magnetic system, inspired by Purcell’s three-link swimmer, can provide this solution through the generation of non-reciprocal motion in an enclosed environment. The device is fabricated monolithically within a microfluidic channel at the time of manufacture, and is actuated using a weak, oscillating magnetic field. The flow rate can be altered dynamically, and the direction of the resultant flow can be controlled by adjusting the frequency of the driving field. The device has been proven, experimentally and numerically, to operate effectively when applied to fluids with a range of viscosities. Such a device may be able to replace external pumping systems in portable applications.

  • Open Access

    Metachronal waves in magnetic micro-robotic paddles for artificial cilia

    by Matthew T. Bryan, Elizabeth L. Martin, Aleksandra Pac, Andrew D. Gilbert, Feodor Y. Ogrin

    Biological cilia generate fluid movement within viscosity-dominated environments using beating motions that break time-reversal symmetry. This creates a metachronal wave, which enhances flow efficiency. Artificially mimicking this behaviour could improve microfluidic point-of-care devices, since viscosity-dominated fluid dynamics impede fluid flow and mixing of reagents, limiting potential for multiplexing diagnostic tests. However, current biomimicry schemes require either variation in the hydrodynamic response across a cilia array or a complex magnetic anisotropy configuration to synchronise the actuation sequence with the driving field. Here, we show that simple modifications to the structural design introduce phase differences between individual actuators, leading to the spontaneous formation of metachronal waves. This generates flow speeds of up to 16 μm/s as far as 675 μm above the actuator plane. By introducing metachronal waves through lithographic structuring, large scale manufacture becomes feasible. Additionally, by demonstrating that metachronal waves emerge from non-uniformity in internal structural mechanics, we offer fresh insight into the mechanics of cilia coordination.


  • Open Access

    Microfluidic devices powered by integrated elasto-magnetic pumps

    by Jacob L. Binsley, Elizabeth L. Martin, Thomas O. Myers, Stefano Pagliara, Feodor Y. Ogrin

    We show how an asymmetric elasto-magnetic system provides a novel integrated pumping solution for lab-on-a-chip and point of care devices. This monolithic pumping solution, inspired by Purcell's 3-link swimmer, is integrated within a simple microfluidic device, bypassing the requirement of external connections. We experimentally prove that this system can provide tuneable fluid flow with a flow rate of up to 600 μL h−1. This fluid flow is achieved by actuating the pump using a weak, uniform, uniaxial, oscillating magnetic field, with field amplitudes in the range of 3–6 mT. Crucially, the fluid flow can be reversed by adjusting the driving frequency. We experimentally prove that this device can successfully operate on fluids with a range of viscosities, where pumping at higher viscosity correlates with a decreasing optimal driving frequency. The fluid flow produced by this device is understood here by examining the non-reciprocal motion of the elasto-magnetic component. This device has the capability to replace external pumping systems with a simple, integrated, lab-on-a-chip component.


  • Open Access

    Controlling collective rotational patterns of magnetic rotors

    by Daiki Matsunaga, Joshua K. Hamilton, Fanlong Meng, Nick Bukin, Elizabeth L. Martin, Feodor Y. Ogrin, Julia M. Yeomans, Ramin Golestanian

    Magnetic actuation is widely used in engineering specific forms of controlled motion in microfluidic applications. A challenge, however, is how to extract different desired responses from different components in the system using the same external magnetic drive. Using experiments, simulations, and theoretical arguments, we present emergent rotational patterns in an array of identical magnetic rotors under an uniform, oscillating magnetic field. By changing the relative strength of the external field strength versus the dipolar interactions between the rotors, different collective modes are selected by the rotors. When the dipole interaction is dominant the rotors swing upwards or downwards in alternating stripes, reflecting the spin-ice symmetry of the static configuration. For larger spacings, when the external field dominates over the dipolar interactions, the rotors undergo full rotations, with different quarters of the array turning in different directions. Our work sheds light on how collective behaviour can be engineered in magnetic systems.


  • Open Access

    Microscale Magneto-Elastic Composite Swimmers at the Air-Water and Water-Solid Interfaces Under a Uniaxial Field

    by M.T. Bryan, J. Garcia-Torres, E.L. Martin, J.K. Hamilton, C. Calero, P.G. Petrov, C.P. Winlove, I. Pagonabarraga, P. Tierno, F. Sagués, et al.

    Self-propulsion of magneto-elastic composite microswimmers is demonstrated under a uniaxial field at both the air-water and the water-substrate interfaces. The microswimmers are made of elastically linked magnetically hard Co−Ni−P and soft Co ferromagnets, fabricated using standard photolithography and electrodeposition. Swimming speed and direction are dependent on the field frequency and amplitude, reaching a maximum of 95.1 µm/s on the substrate surface. Fastest motion occurs at low frequencies via a spinning (air-water interface) or tumbling (water-substrate interface) mode that induces transient inertial motion. Higher frequencies result in low Reynolds number propagation at both interfaces via a rocking mode. Therefore, the same microswimmer can be operated as either a high or a low Reynolds number swimmer. Swimmer pairs agglomerate to form a faster superstructure that propels via spinning and rocking modes analogous to those seen in isolated swimmers. Microswimmer propulsion is driven by a combination of dipolar interactions between the Co and Co−Ni−P magnets and rotational torque due to the applied field, combined with elastic deformation and hydrodynamic interactions between different parts of the swimmer, in agreement with previous models.


  • Advanced Processing of Micropatterned Elasto-Magnetic Membranes

    by Elizabeth L. Martin, Matthew T. Bryan, Stefano Pagliara, Feodor Y. Ogrin

    We report on a fabrication of a highly structured elasto-magnetic membrane with microscopic unit cells using lithographic techniques and electrodeposition. The membrane comprises micromagnets of CoNiP and Co connected via an elastic PDMS network with an area spanning 12 mm². Ellipsoidal CoNiP and circular Co particles were produced by electrodeposition to achieve diameters of 30 (major) and 10 μ m (minor) and 10 μm, respectively, with a thickness in the range of 6-10 μm. The electrodeposition parameters have been optimized on deposition of CoNiP films to produce an in-plane coercivity for CoNiP elements of 435 Oe. The mechanical properties of the elasto-magnetic membrane were confirmed on application of an alternating magnetic field. The proposed methodology offers a new way for fabrication of novel microfluidic and microelectro-mechanical-systems devices.