Richard Magee
Richard Magee has a total of 283 co-authors. Here are the top co-authors by number of shared publications:
- Hiroshi Gota
TAE Technologies, Inc
8 shared publications - Ian Allfrey
TAE Technologies, Inc., Foothill Ranch, USA
6 shared publications T. Tajima
TAE Technologies, Inc., Foothill Ranch, USA
6 shared publications- Thomas Roche
TAE Technologies, Inc., Foothill Ranch, CA, United States of America
6 shared publications - J. B. Titus
TAE Technologies, Inc., Foothill Ranch, CA, United States of America
5 shared publications - Michl W. Binderbauer
TAE Technologies, Inc. , 19631 Pauling, Foothill Ranch, California 92610, USA
5 shared publications
Latest Publications
- Top Cited PapersOpen Access
- 12 April 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-11
Generation of field-reversed configurations via neutral beam injection
We report evidence of successful generation of field-reversed configuration plasmas by neutral beam injection. This is achieved by trapping the steady-state beams in an initial seed plasma, hence providing a direct source of toroidally directed energetic ion current and increase plasma density and temperature until plasma and magnetic pressures become comparable. Magnetic flux trapping occurs gradually, and the change in topology from open field line to fully a formed field-reversed configuration is complete within ~ 10 ms. Field reversal is first established using a traditional metric and complemented by advanced reconstruction algorithms of the magnetic topology and plasma pressure profiles; observations of characteristic changes to fast-ion orbits inferred from magnetic fluctuations; and an experimentally validated model of field reversal by neutral beam injection. These results establish a field-reversed configuration formation method which may offer technological and economic advantages on a path to a future fusion energy system.
- 12 April 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-11
Top Cited PapersOpen AccessGeneration of field-reversed configurations via neutral beam injection
We report evidence of successful generation of field-reversed configuration plasmas by neutral beam injection. This is achieved by trapping the steady-state beams in an initial seed plasma, hence providing a direct source of toroidally directed energetic ion current and increase plasma density and temperature until plasma and magnetic pressures become comparable. Magnetic flux trapping occurs gradually, and the change in topology from open field line to fully a formed field-reversed configuration is complete within ~ 10 ms. Field reversal is first established using a traditional metric and complemented by advanced reconstruction algorithms of the magnetic topology and plasma pressure profiles; observations of characteristic changes to fast-ion orbits inferred from magnetic fluctuations; and an experimentally validated model of field reversal by neutral beam injection. These results establish a field-reversed configuration formation method which may offer technological and economic advantages on a path to a future fusion energy system.
- 12 March 2025
- Published by Taylor & Francis in Fusion Science and Technology
- Vol. 82 (7) , 1-16
Advancing Fusion Research and Development at TAE Technologies Through INFUSE Program
- 12 March 2025
- Published by Taylor & Francis in Fusion Science and Technology
- Vol. 82 (7) , 1-16
Advancing Fusion Research and Development at TAE Technologies Through INFUSE Program
- Open Access
- 23 August 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (11) , 112014
Enhanced plasma performance in C-2W advanced beam-driven field-reversed configuration experiments
TAE Technologies’ fifth-generation fusion device, C-2W (also called ‘Norman’), is the world’s largest compact-toroid device and has made significant progress in field-reversed configuration (FRC) plasma performance. C-2W produces record breaking, macroscopically stable, high-temperature advanced beam-driven FRC plasmas, dominated by injected fast particles and sustained in steady state, which is primarily limited by neutral-beam (NB) pulse duration. The NB power supply system has recently been upgraded to extend the pulse length from 30 ms to 40 ms, which allows for a longer plasma lifetime and thus better characterization and further enhancement of FRC performance. An active plasma control system is routinely used in C-2W to produce consistent FRC performance as well as for reliable machine operations using magnet coils, edge-biasing electrodes, gas injection and tunable-energy NBs. Google’s machine learning framework for experimental optimization has also been routinely used to enhance plasma performance. Dedicated plasma optimization experimental campaigns, particularly focused on the external magnetic field profile and NB injection (NBI) optimizations, have produced a superior FRC plasma performance; for instance, achieving a total plasma energy of ∼13 kJ, a trapped poloidal magnetic flux of ∼16 mWb (based on the rigid-rotor model) and plasma sustainment in steady state up to ∼40 ms. Furthermore, under some operating conditions, the electron temperature of FRC plasmas at a quiescent phase has successfully reached up to ∼1 keV at the peak inside the FRC separatrix for the first time. The overall FRC performance is well correlated with the NB and edge-biasing systems, where higher total plasma energy is obtained with higher NBI power and applied voltage on biasing electrodes. C-2W operations have now reached a mature level where the machine can produce hot, stable, long-lived, and repeatable plasmas in a well-controlled manner.
- 23 August 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (11) , 112014
Open AccessEnhanced plasma performance in C-2W advanced beam-driven field-reversed configuration experiments
TAE Technologies’ fifth-generation fusion device, C-2W (also called ‘Norman’), is the world’s largest compact-toroid device and has made significant progress in field-reversed configuration (FRC) plasma performance. C-2W produces record breaking, macroscopically stable, high-temperature advanced beam-driven FRC plasmas, dominated by injected fast particles and sustained in steady state, which is primarily limited by neutral-beam (NB) pulse duration. The NB power supply system has recently been upgraded to extend the pulse length from 30 ms to 40 ms, which allows for a longer plasma lifetime and thus better characterization and further enhancement of FRC performance. An active plasma control system is routinely used in C-2W to produce consistent FRC performance as well as for reliable machine operations using magnet coils, edge-biasing electrodes, gas injection and tunable-energy NBs. Google’s machine learning framework for experimental optimization has also been routinely used to enhance plasma performance. Dedicated plasma optimization experimental campaigns, particularly focused on the external magnetic field profile and NB injection (NBI) optimizations, have produced a superior FRC plasma performance; for instance, achieving a total plasma energy of ∼13 kJ, a trapped poloidal magnetic flux of ∼16 mWb (based on the rigid-rotor model) and plasma sustainment in steady state up to ∼40 ms. Furthermore, under some operating conditions, the electron temperature of FRC plasmas at a quiescent phase has successfully reached up to ∼1 keV at the peak inside the FRC separatrix for the first time. The overall FRC performance is well correlated with the NB and edge-biasing systems, where higher total plasma energy is obtained with higher NBI power and applied voltage on biasing electrodes. C-2W operations have now reached a mature level where the machine can produce hot, stable, long-lived, and repeatable plasmas in a well-controlled manner.
- Open Access
- 2 August 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (9) , 096028
Demonstration of aneutronic p-11B reaction in a magnetic confinement device
Aneutronic fusion using commonly available fuel such as hydrogen and boron 11 (11B) is one of the most attractive potential energy sources. On the other hand, it requires 30 times higher temperature than deuterium–tritium fusion in a thermonuclear fusion reactor condition. Development of techniques to realize its potential for the experimental capability to produce proton-boron 11 (p-11B) fusion in the magnetically confined fusion device using neutral beam injection is desired. Here we report clear experimental exploration and measurements of p-11B fusion reactions supported by intense hydrogen beams and impurity powder dropper installed in the magnetic confinement plasma Large Helical Device. We measured a significant amount of fusion alpha particle emission using a custom designed alpha particle detector based on a passivated implanted planar silicon detector. Intense negative-ion-based hydrogen beam injectors created a large population of up to 160 keV energetic protons to react with the boron-injected plasma. The p-11B alpha particles having MeV energy were measured with the alpha particle detector which gave a fusion rate in a good agreement with the global p-11B alpha emission rate calculated based on classical confinement of energetic proton, using experimentally obtained plasma parameters.
- 2 August 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (9) , 096028
Open AccessDemonstration of aneutronic p-11B reaction in a magnetic confinement device
Aneutronic fusion using commonly available fuel such as hydrogen and boron 11 (11B) is one of the most attractive potential energy sources. On the other hand, it requires 30 times higher temperature than deuterium–tritium fusion in a thermonuclear fusion reactor condition. Development of techniques to realize its potential for the experimental capability to produce proton-boron 11 (p-11B) fusion in the magnetically confined fusion device using neutral beam injection is desired. Here we report clear experimental exploration and measurements of p-11B fusion reactions supported by intense hydrogen beams and impurity powder dropper installed in the magnetic confinement plasma Large Helical Device. We measured a significant amount of fusion alpha particle emission using a custom designed alpha particle detector based on a passivated implanted planar silicon detector. Intense negative-ion-based hydrogen beam injectors created a large population of up to 160 keV energetic protons to react with the boron-injected plasma. The p-11B alpha particles having MeV energy were measured with the alpha particle detector which gave a fusion rate in a good agreement with the global p-11B alpha emission rate calculated based on classical confinement of energetic proton, using experimentally obtained plasma parameters.
- Top Cited PapersOpen Access
- 21 February 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-6
First measurements of p11B fusion in a magnetically confined plasma
Proton-boron (p11B) fusion is an attractive potential energy source but technically challenging to implement. Developing techniques to realize its potential requires first developing the experimental capability to produce p11B fusion in the magnetically-confined, thermonuclear plasma environment. Here we report clear experimental measurements supported by simulation of p11B fusion with high-energy neutral beams and boron powder injection in a high-temperature fusion plasma (the Large Helical Device) that have resulted in diagnostically significant levels of alpha particle emission. The injection of boron powder into the plasma edge results in boron accumulation in the core. Three 2 MW, 160 kV hydrogen neutral beam injectors create a large population of well-confined, high -energy protons to react with the boron plasma. The fusion products, MeV alpha particles, are measured with a custom designed particle detector which gives a fusion rate in very good relative agreement with calculations of the global rate. This is the first such realization of p11B fusion in a magnetically confined plasma.
- 21 February 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-6
Top Cited PapersOpen AccessFirst measurements of p11B fusion in a magnetically confined plasma
Proton-boron (p11B) fusion is an attractive potential energy source but technically challenging to implement. Developing techniques to realize its potential requires first developing the experimental capability to produce p11B fusion in the magnetically-confined, thermonuclear plasma environment. Here we report clear experimental measurements supported by simulation of p11B fusion with high-energy neutral beams and boron powder injection in a high-temperature fusion plasma (the Large Helical Device) that have resulted in diagnostically significant levels of alpha particle emission. The injection of boron powder into the plasma edge results in boron accumulation in the core. Three 2 MW, 160 kV hydrogen neutral beam injectors create a large population of well-confined, high -energy protons to react with the boron plasma. The fusion products, MeV alpha particles, are measured with a custom designed particle detector which gives a fusion rate in very good relative agreement with calculations of the global rate. This is the first such realization of p11B fusion in a magnetically confined plasma.
- 10 October 2022
- Published by IOP Publishing in Nuclear Fusion
- Vol. 62 (12) , 126019
Enhancing historical electron temperature data with an artificial neural network in the C-2U FRC
The electron temperature is a vital parameter in understanding the dynamics of fusion plasmas, helping to determine basic properties of the system, stability, and fast ion lifetime. We present a method for improving the sampling rate of historical Thomson scattering data by a factor of 103 on the decommissioned beam-driven C-2U field reversed configuration device by utilizing an artificial neural network. This work details the construction of the model, including an analysis of input signals and the model hyperparameter space. The model’s performance is evaluated on both a random subset and selected ensemble of testing data and its predictions are found to agree with the Thomson measurements in both cases. Finally, the model is used to reconstruct the effect of the micro-burst instability in C-2U, which is then compared to more recent results in C-2W, showing that the effects of the micro-burst on core electron temperature have been mitigated in C-2W.
- 10 October 2022
- Published by IOP Publishing in Nuclear Fusion
- Vol. 62 (12) , 126019
Enhancing historical electron temperature data with an artificial neural network in the C-2U FRC
The electron temperature is a vital parameter in understanding the dynamics of fusion plasmas, helping to determine basic properties of the system, stability, and fast ion lifetime. We present a method for improving the sampling rate of historical Thomson scattering data by a factor of 103 on the decommissioned beam-driven C-2U field reversed configuration device by utilizing an artificial neural network. This work details the construction of the model, including an analysis of input signals and the model hyperparameter space. The model’s performance is evaluated on both a random subset and selected ensemble of testing data and its predictions are found to agree with the Thomson measurements in both cases. Finally, the model is used to reconstruct the effect of the micro-burst instability in C-2U, which is then compared to more recent results in C-2W, showing that the effects of the micro-burst on core electron temperature have been mitigated in C-2W.
- 1 August 2022
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 93 (8) , 083504
Fiber Bragg grating sensor array for detecting heat flux in vacuum
In TAE Technologies’ current experimental device, C-2W (also called “Norman”), record-breaking, advanced beam-driven field-reversed configuration plasmas are produced and sustained in steady state utilizing variable energy neutral beams, advanced divertors, edge-biasing electrodes, and an active plasma control system [Gota et al., Nucl. Fusion 61, 106039 (2021)]. A novel diagnostic has been developed by TAE Technologies to leverage an industrial fiber Bragg grating (FBG) sensor array to detect heat flux along the wall of the vacuum vessel from a plasma discharge. The system consists of an optical fiber with FBG sensors distributed along its length, housed in a pressurized steel sheath. Each FBG sensor is constructed to reflect a different wavelength, the exact value of which is sensitive to the strain and temperature at the location of the grating in the fiber. The fiber is illuminated with broadband light, and the data acquisition system analyzes the spectrum of reflected light to determine the temperature at the location of each FBG. We have installed four of these vacuum-rated FBG sensor arrays on the C-2W experiment, each with 30 individual FBG sensors spaced at 0.15 m intervals along the 5 m fiber, with a 100 Hz acquisition rate. The measurement of temperature change due to a plasma discharge provides a single data point at each sensor location, creating a 120-point heat map of the vacuum vessel.
- 1 August 2022
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 93 (8) , 083504
Fiber Bragg grating sensor array for detecting heat flux in vacuum
In TAE Technologies’ current experimental device, C-2W (also called “Norman”), record-breaking, advanced beam-driven field-reversed configuration plasmas are produced and sustained in steady state utilizing variable energy neutral beams, advanced divertors, edge-biasing electrodes, and an active plasma control system [Gota et al., Nucl. Fusion 61, 106039 (2021)]. A novel diagnostic has been developed by TAE Technologies to leverage an industrial fiber Bragg grating (FBG) sensor array to detect heat flux along the wall of the vacuum vessel from a plasma discharge. The system consists of an optical fiber with FBG sensors distributed along its length, housed in a pressurized steel sheath. Each FBG sensor is constructed to reflect a different wavelength, the exact value of which is sensitive to the strain and temperature at the location of the grating in the fiber. The fiber is illuminated with broadband light, and the data acquisition system analyzes the spectrum of reflected light to determine the temperature at the location of each FBG. We have installed four of these vacuum-rated FBG sensor arrays on the C-2W experiment, each with 30 individual FBG sensors spaced at 0.15 m intervals along the 5 m fiber, with a 100 Hz acquisition rate. The measurement of temperature change due to a plasma discharge provides a single data point at each sensor location, creating a 120-point heat map of the vacuum vessel.
- 1 October 2021
- Published by IOP Publishing in Nuclear Fusion
- Vol. 61 (10) , 106039
Overview of C-2W: high temperature, steady-state beam-driven field-reversed configuration plasmas
- 1 October 2021
- Published by IOP Publishing in Nuclear Fusion
- Vol. 61 (10) , 106039
Overview of C-2W: high temperature, steady-state beam-driven field-reversed configuration plasmas
- Open Access
- 16 August 2021
- Published by IOP Publishing in Nuclear Fusion
- Vol. 61 (9) , 096032
Observation of self-organized FRC formation in a collisional-merging experiment
Self-organized field-reversed configuration (FRC)-like formation was observed after the super-sonic/Alfvénic collisional merging of two FRCs in the FAT-CM device at Nihon University. In this experiment, two FRCs were generated initially in two separate field-reversed theta-pinch type formation regions. Those two formation regions are coaxially connected to opposite ends of a cylindrical confinement chamber. The formed FRCs are oppositely-translated and collide in the middle of the confinement chamber at super-sonic/Alfvénic velocity. During the collision, the merged plasmoid experiences destructive disturbance and loses its fast toroidal flow and characteristic FRC property of having a field-reversed magnetic configuration to become a magnetized plasma without ordered structure. After this dynamic collision, a magnetic configuration of FRC with fast toroidal rotation is self-organized within a few tens of microseconds. This observation indicates robustness of the extremely high-beta, simple magnetic configuration.
- 16 August 2021
- Published by IOP Publishing in Nuclear Fusion
- Vol. 61 (9) , 096032
Open AccessObservation of self-organized FRC formation in a collisional-merging experiment
Self-organized field-reversed configuration (FRC)-like formation was observed after the super-sonic/Alfvénic collisional merging of two FRCs in the FAT-CM device at Nihon University. In this experiment, two FRCs were generated initially in two separate field-reversed theta-pinch type formation regions. Those two formation regions are coaxially connected to opposite ends of a cylindrical confinement chamber. The formed FRCs are oppositely-translated and collide in the middle of the confinement chamber at super-sonic/Alfvénic velocity. During the collision, the merged plasmoid experiences destructive disturbance and loses its fast toroidal flow and characteristic FRC property of having a field-reversed magnetic configuration to become a magnetized plasma without ordered structure. After this dynamic collision, a magnetic configuration of FRC with fast toroidal rotation is self-organized within a few tens of microseconds. This observation indicates robustness of the extremely high-beta, simple magnetic configuration.
- 1 June 2021
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 92 (6) , 063501
Development of a fast response neutron detector for the supersonic FRC collision process
The collisional merging experiments of the field-reversing configuration (FRC) at supersonic/Alfvénic velocities have been performed in the FRC Amplification via Translation-Collisional Merging device only in Japan. This experiment may excite shockwaves and cause particle acceleration. To obtain supporting evidence of particle acceleration by shockwaves, we have proposed to observe neutrons originating from the D–D fusion reaction of accelerated non-thermal particles. A plastic scintillation detector has been developed for the supersonic/Alfvénic collision/merging FRC experiment. The developed neutron detector has sufficient performance of neutron sensitivity and nanosecond response time. In the collisional merging process, we obtained a signal that could be considered a neutron, which is not predicted by the adiabatic compression process in the two-dimensional magnetohydrodynamics simulation.
- 1 June 2021
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 92 (6) , 063501
Development of a fast response neutron detector for the supersonic FRC collision process
The collisional merging experiments of the field-reversing configuration (FRC) at supersonic/Alfvénic velocities have been performed in the FRC Amplification via Translation-Collisional Merging device only in Japan. This experiment may excite shockwaves and cause particle acceleration. To obtain supporting evidence of particle acceleration by shockwaves, we have proposed to observe neutrons originating from the D–D fusion reaction of accelerated non-thermal particles. A plastic scintillation detector has been developed for the supersonic/Alfvénic collision/merging FRC experiment. The developed neutron detector has sufficient performance of neutron sensitivity and nanosecond response time. In the collisional merging process, we obtained a signal that could be considered a neutron, which is not predicted by the adiabatic compression process in the two-dimensional magnetohydrodynamics simulation.