Polychronis Spyridon Dellis
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Polychronis Spyridon Dellis has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
C Arcoumanis
2 shared publicationsConstantine Arcoumanis
School of Engineering and Mathematical Science, City University London, UK
1 shared publication
Latest Publications
- Open Access
- 20 December 2024
- Published by MDPI AG in Lubricants
- Vol. 12 (12) , 460
Comparative Research in the Field of the Parametric Effect of Lubricant Cavitation Initiation and Development on Friction and Wear in Piston Ring and Cylinder Liner Assemblies
This research follows closely previous findings in flow characteristics and phenomena that take place in the piston ring and cylinder liner interface during motoring and firing engine operation, and also compares results between different optical engine set-ups. Cavitation visualisation in a simulating lubrication single-ring test rig and oil transport and cavitation visualisation in custom made cylinder assemblies of optical engines are the tools used to quantify the transport process under the piston ring and cylinder liner. Simplification of the interface is an essential technique that enhances the researcher’s confidence in results interpretation. Engine complexity and severe oil starvation are impeding the analysis of the experimental results. Visualisation experiments constitute an effective way to test various lubricant types and assess their overall performance characteristics, including their properties and cavitation behaviour. The repeatability of the visualisation method establishes the parametric study effects and offers valuable experimental results. As a further step towards the lubricant composition effect, a link between the lubricant formulation and the operating conditions could be established as the oil performance is assessed with a view to its transport behaviour. Image processing is used to quantify the impact of cavitation on piston ring lubrication in conjunction with varied operating and lubricant parameters. The characteristics of the lubricant and the working environment have an impact on these types of cavities. Viscosity, cavitation, oil film thickness (OFT), lubricant shear-thinning characteristics and friction are all linked.
- 20 December 2024
- Published by MDPI AG in Lubricants
- Vol. 12 (12) , 460
Open AccessComparative Research in the Field of the Parametric Effect of Lubricant Cavitation Initiation and Development on Friction and Wear in Piston Ring and Cylinder Liner Assemblies
This research follows closely previous findings in flow characteristics and phenomena that take place in the piston ring and cylinder liner interface during motoring and firing engine operation, and also compares results between different optical engine set-ups. Cavitation visualisation in a simulating lubrication single-ring test rig and oil transport and cavitation visualisation in custom made cylinder assemblies of optical engines are the tools used to quantify the transport process under the piston ring and cylinder liner. Simplification of the interface is an essential technique that enhances the researcher’s confidence in results interpretation. Engine complexity and severe oil starvation are impeding the analysis of the experimental results. Visualisation experiments constitute an effective way to test various lubricant types and assess their overall performance characteristics, including their properties and cavitation behaviour. The repeatability of the visualisation method establishes the parametric study effects and offers valuable experimental results. As a further step towards the lubricant composition effect, a link between the lubricant formulation and the operating conditions could be established as the oil performance is assessed with a view to its transport behaviour. Image processing is used to quantify the impact of cavitation on piston ring lubrication in conjunction with varied operating and lubricant parameters. The characteristics of the lubricant and the working environment have an impact on these types of cavities. Viscosity, cavitation, oil film thickness (OFT), lubricant shear-thinning characteristics and friction are all linked.
- Open Access
- 15 September 2023
- Published by Faculty of Engineering, University of Kragujevac in Tribology in Industry
- Vol. 45 (3) , 503-510
Wear Metal Concentrations Used for Enhancing Spectrometric Oil Analysis Method Credibility and Statistical Feedback - A Step Towards Big Data Analysis
- 15 September 2023
- Published by Faculty of Engineering, University of Kragujevac in Tribology in Industry
- Vol. 45 (3) , 503-510
Open AccessWear Metal Concentrations Used for Enhancing Spectrometric Oil Analysis Method Credibility and Statistical Feedback - A Step Towards Big Data Analysis
- 6 June 2023
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 237 (9) , 1723-1742
On the effect of temperature in friction force measurements for a simplified piston cylinder set-up: Squeeze film combined with minimum oil film thickness measurements and viscosity index effect
The lubricated interface at the piston-ring and liner and its interaction with different lubricants and testing conditions is examined in terms of experimental measurements that show the minimum oil film thickness developed at the lubricated or depending on conditions partly lubricated conjunction and the surface interaction intensity, as measured from the friction sensor. An analysis is carried out with the use of different parameters for the experiments as well as different lubricants in a simplified piston-ring simulation test rig. This analysis is further enhanced with the squeeze film effect investigations close to the stroke reversals and together with cavitation initiation and load-carrying effect results from previous experimental data, light is shed on the interacting surface’s behaviour at the different lubrication regimes. Another parameter, the viscosity index of the lubricant is used as an indication of the effects of squeeze film shift and friction force measurements and how the load and temperature effect are influencing the squeeze film.
- 6 June 2023
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 237 (9) , 1723-1742
On the effect of temperature in friction force measurements for a simplified piston cylinder set-up: Squeeze film combined with minimum oil film thickness measurements and viscosity index effect
The lubricated interface at the piston-ring and liner and its interaction with different lubricants and testing conditions is examined in terms of experimental measurements that show the minimum oil film thickness developed at the lubricated or depending on conditions partly lubricated conjunction and the surface interaction intensity, as measured from the friction sensor. An analysis is carried out with the use of different parameters for the experiments as well as different lubricants in a simplified piston-ring simulation test rig. This analysis is further enhanced with the squeeze film effect investigations close to the stroke reversals and together with cavitation initiation and load-carrying effect results from previous experimental data, light is shed on the interacting surface’s behaviour at the different lubrication regimes. Another parameter, the viscosity index of the lubricant is used as an indication of the effects of squeeze film shift and friction force measurements and how the load and temperature effect are influencing the squeeze film.
- 14 February 2022
- Published by Emerald Publishing in International Journal of Structural Integrity
- Vol. 13 (4) , 611-631
Piston ring performance II: measurement of cavitation shapes in different operating conditions and their link to lubricant properties
Purpose: This study aims to compare cavitation shapes between the simulating test rig and the engines to strengthen the findings that were first observed in the simplified experiments. Different forms of cavitation were identified, and their shape and size (length and width) were dictated from reciprocating speed and viscosity of the lubricant. Cavitation degrades performance in engineering applications and its effect is that it alters the oil film pressure.Design/methodology/approach: Lubricant formulations were used for parametric study as well as different operating testing parameters in a simulating test rig and single cylinder engines with visualisation windows. An algorithm was used for extracting cavitation data from imaging, and comparison was made.Findings: Similar phenomena at the simulating test rig and the engine were investigated and compared. The effect of different operating conditions was assessed along with the variations produced from the parametric lubricant study.Research limitations/implications: Engine results are limited due to manufacturing difficulties of visualisation windows and oil starvation. Firing tests are another difficult challenge as the modified section pressure is under more pressure and the window view is affected by combustion process. Limited pictures can be captured before cleaning is required. A lubricant manufacturer has to provide data regarding the chemistry of the lubricants.Originality/value: The effect of cavitation in piston ring lubrication along with variable operating and lubricant parameters is further studied with quantification of cavitation results through image processing. These forms of cavities are affected by lubricant properties and operating conditions. A link between viscosity, cavitation, shear thinning properties, oil film thickness (OFT) and friction is given.
- 14 February 2022
- Published by Emerald Publishing in International Journal of Structural Integrity
- Vol. 13 (4) , 611-631
Piston ring performance II: measurement of cavitation shapes in different operating conditions and their link to lubricant properties
Purpose: This study aims to compare cavitation shapes between the simulating test rig and the engines to strengthen the findings that were first observed in the simplified experiments. Different forms of cavitation were identified, and their shape and size (length and width) were dictated from reciprocating speed and viscosity of the lubricant. Cavitation degrades performance in engineering applications and its effect is that it alters the oil film pressure.Design/methodology/approach: Lubricant formulations were used for parametric study as well as different operating testing parameters in a simulating test rig and single cylinder engines with visualisation windows. An algorithm was used for extracting cavitation data from imaging, and comparison was made.Findings: Similar phenomena at the simulating test rig and the engine were investigated and compared. The effect of different operating conditions was assessed along with the variations produced from the parametric lubricant study.Research limitations/implications: Engine results are limited due to manufacturing difficulties of visualisation windows and oil starvation. Firing tests are another difficult challenge as the modified section pressure is under more pressure and the window view is affected by combustion process. Limited pictures can be captured before cleaning is required. A lubricant manufacturer has to provide data regarding the chemistry of the lubricants.Originality/value: The effect of cavitation in piston ring lubrication along with variable operating and lubricant parameters is further studied with quantification of cavitation results through image processing. These forms of cavities are affected by lubricant properties and operating conditions. A link between viscosity, cavitation, shear thinning properties, oil film thickness (OFT) and friction is given.
- Open Access
- 15 December 2019
- Published by Faculty of Engineering, University of Kragujevac in Tribology in Industry
- Vol. 41 (4) , 471-483
Oil Film Thickness Measurements Combined with High Temperature Friction Investigations in a Simplified Piston-Ring Lubrication Test Rig
- 15 December 2019
- Published by Faculty of Engineering, University of Kragujevac in Tribology in Industry
- Vol. 41 (4) , 471-483
Open AccessOil Film Thickness Measurements Combined with High Temperature Friction Investigations in a Simplified Piston-Ring Lubrication Test Rig
- Open Access
- 15 June 2019
- Published by Faculty of Engineering, University of Kragujevac in Tribology in Industry
- Vol. 41 (2) , 292-309
The Automated Spectrometric Oil Analysis Decision Taking Procedure as a Tool to Prevent Aircraft Engine Failures
- 15 June 2019
- Published by Faculty of Engineering, University of Kragujevac in Tribology in Industry
- Vol. 41 (2) , 292-309
Open AccessThe Automated Spectrometric Oil Analysis Decision Taking Procedure as a Tool to Prevent Aircraft Engine Failures
- 10 June 2019
- Published by Emerald Publishing in International Journal of Structural Integrity
- Vol. 10 (3) , 304-324
Piston-ring performance: limitations from cavitation and friction
Purpose: Cavitation in piston-ring lubrication is studied as part of the performance of piston-ring assemblies. Cavitation degrades performance in engineering applications and its effect is that it alters the oil film pressure, generated at the converging-diverging wedge of the interface. Studies tried to shed light to the phenomenon of cavitation and compare it with cavities that have been identified in bearings. The paper aims to discuss this issue. Design/methodology/approach: Lubricant formulations were used for parametric study of oil film thickness (OFT) and friction providing the OFT throughout the stroke and LIF for OFT point measurements. Lubricant formulation affects cavitation appearance and behaviour when fully developed. Findings: Cavitation affects the ring load carrying capacity. Different forms of cavitation were identified and their shape and size (length and width) is dictated from reciprocating speed and viscosity of the lubricant. A clear picture is given from both techniques and friction results give quantifiable data in terms of the effect in wear and cavitation, depending on the lubricant properties. Research limitations/implications: Engine results are limited due to manufacturing difficulties of visualisation windows and oil starvation. Therefore, full stroke length sized windows were not an option and motoring tests were implemented due to materials limitations (adhesive and quartz windows). Lubricant manufacturer has to give data regarding the chemistry of the lubricants. Originality/value: The contribution of cavitation in piston-ring lubrication OFT, friction measurements and lubricant parameters that try to shed light to the different forms of cavitation. A link between viscosity, cavitation, shear thinning properties, OFT and friction is given.
- 10 June 2019
- Published by Emerald Publishing in International Journal of Structural Integrity
- Vol. 10 (3) , 304-324
Piston-ring performance: limitations from cavitation and friction
Purpose: Cavitation in piston-ring lubrication is studied as part of the performance of piston-ring assemblies. Cavitation degrades performance in engineering applications and its effect is that it alters the oil film pressure, generated at the converging-diverging wedge of the interface. Studies tried to shed light to the phenomenon of cavitation and compare it with cavities that have been identified in bearings. The paper aims to discuss this issue. Design/methodology/approach: Lubricant formulations were used for parametric study of oil film thickness (OFT) and friction providing the OFT throughout the stroke and LIF for OFT point measurements. Lubricant formulation affects cavitation appearance and behaviour when fully developed. Findings: Cavitation affects the ring load carrying capacity. Different forms of cavitation were identified and their shape and size (length and width) is dictated from reciprocating speed and viscosity of the lubricant. A clear picture is given from both techniques and friction results give quantifiable data in terms of the effect in wear and cavitation, depending on the lubricant properties. Research limitations/implications: Engine results are limited due to manufacturing difficulties of visualisation windows and oil starvation. Therefore, full stroke length sized windows were not an option and motoring tests were implemented due to materials limitations (adhesive and quartz windows). Lubricant manufacturer has to give data regarding the chemistry of the lubricants. Originality/value: The contribution of cavitation in piston-ring lubrication OFT, friction measurements and lubricant parameters that try to shed light to the different forms of cavitation. A link between viscosity, cavitation, shear thinning properties, OFT and friction is given.
- 14 January 2019
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 21 (9) , 1597-1611
Laser-induced fluorescence measurements in a single-ring test rig: Evidence of cavitation and the effect of different operating conditions and lubricants in cavitation patterns and initiation
The laser-induced fluorescence technique is based on the excitation of molecules of a fluorescent material by a light source. The main advantage of this technique is that it has the potential to quantify the lubricant film thickness throughout the cycle. Similar to all the other optical techniques, it has this major advantage compared to the electrical techniques where the oil film can be measured only under the piston rings. In this work, experimental data from a simulating single-ring test rig are presented and further parametric analysis is given regarding cavitation in lubricants that was, at first, in the case of the single-ring test rig, evident in laser-induced fluorescence measurements. Different lubricants are used for the laser-induced fluorescence experiments and the different laser-induced fluorescence signals are analysed and interpreted compared to their physical and chemical properties and, furthermore, with the aid of imaging through a glass liner, a clearer picture is given regarding the cavitation shapes together with the respective laser-induced fluorescence measurements and cavitation initiation.
- 14 January 2019
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 21 (9) , 1597-1611
Laser-induced fluorescence measurements in a single-ring test rig: Evidence of cavitation and the effect of different operating conditions and lubricants in cavitation patterns and initiation
The laser-induced fluorescence technique is based on the excitation of molecules of a fluorescent material by a light source. The main advantage of this technique is that it has the potential to quantify the lubricant film thickness throughout the cycle. Similar to all the other optical techniques, it has this major advantage compared to the electrical techniques where the oil film can be measured only under the piston rings. In this work, experimental data from a simulating single-ring test rig are presented and further parametric analysis is given regarding cavitation in lubricants that was, at first, in the case of the single-ring test rig, evident in laser-induced fluorescence measurements. Different lubricants are used for the laser-induced fluorescence experiments and the different laser-induced fluorescence signals are analysed and interpreted compared to their physical and chemical properties and, furthermore, with the aid of imaging through a glass liner, a clearer picture is given regarding the cavitation shapes together with the respective laser-induced fluorescence measurements and cavitation initiation.
- Open Access
- 7 August 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 188, 04012
The effect of friction force and cavitation on wear in piston-cylinder assemblies
Both in engines and test rigs, cavitation in piston-ring lubrication is a subject studied by many researchers in the past. Although there is no sufficient evidence of cavitation erosion on the surface of the liner, this phenomenon is studied as part of the lubricant transport process. During the transport process the lubricant enters the combustion chamber. The combustion products of consumed oil might contribute to exhaust gas emissions and with emission legislation becoming more stringent, it is important that oil consumption is reduced to the lowest level possible. The role of the piston-rings is becoming more complex with the imposed requirements for lower oil consumption and friction. The piston-ring pack role on engine performance, durability and wear, is becoming on the other hand, more demanding. Between the piston-ring and cylinder liner, cavitation occurs as a result of two-phase liquid flow. Cavitation has long been recognized to degrade performances in most engineering applications and its effect in piston-ring lubrication is that it alters the oil film pressure profile, generated at the converging-diverging wedge of the piston-ring. An area of the piston-ring surface is void, corresponds to subatmospheric pressures and thus, the piston-ring load capacity is altered. Two experimental rigs were used, a simplified single-ring test rig that simulates the piston-ring liner movement at speeds corresponding to idle but the movement is reversed and a single cylinder diesel engine that was used for visualization results only, after the necessary modifications.
- 7 August 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 188, 04012
Open AccessThe effect of friction force and cavitation on wear in piston-cylinder assemblies
Both in engines and test rigs, cavitation in piston-ring lubrication is a subject studied by many researchers in the past. Although there is no sufficient evidence of cavitation erosion on the surface of the liner, this phenomenon is studied as part of the lubricant transport process. During the transport process the lubricant enters the combustion chamber. The combustion products of consumed oil might contribute to exhaust gas emissions and with emission legislation becoming more stringent, it is important that oil consumption is reduced to the lowest level possible. The role of the piston-rings is becoming more complex with the imposed requirements for lower oil consumption and friction. The piston-ring pack role on engine performance, durability and wear, is becoming on the other hand, more demanding. Between the piston-ring and cylinder liner, cavitation occurs as a result of two-phase liquid flow. Cavitation has long been recognized to degrade performances in most engineering applications and its effect in piston-ring lubrication is that it alters the oil film pressure profile, generated at the converging-diverging wedge of the piston-ring. An area of the piston-ring surface is void, corresponds to subatmospheric pressures and thus, the piston-ring load capacity is altered. Two experimental rigs were used, a simplified single-ring test rig that simulates the piston-ring liner movement at speeds corresponding to idle but the movement is reversed and a single cylinder diesel engine that was used for visualization results only, after the necessary modifications.