SMStefan C. B. Mannsfeld

Stefan C. B. Mannsfeld

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Stefan C. B. Mannsfeld has a total of 578 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Highly Sensitive Broadband Photodetectors Based on Donor–Acceptor 2D Conjugated Coordination Polymers

    by Yunxu Chen, Jinxin Liu, Shuai Fu, Apurba Mahapatra, Dongxu Wang, Mike Hambsch, Angelika Wrzesińska‐Lashkova, Jing Wang, Fabian Paulus, Yana Vaynzof, et al.

    Two‐dimensional (2D) semiconductors are highly desirable for broadband photodetection but are often constrained by their limited optical absorption and inefficient exciton dissociation. In this study, we report a donor–acceptor‐engineered 2D conjugated coordination polymer (c‐CP), Ni‐TABQ (TABQ = tetraaminobenzoquinone), as a narrow‐bandgap semiconductor. The TABQ ligands integrate electron‐rich amino donors and electron‐deficient quinone carbonyl acceptors within the same molecular backbone, endowing the Ni‐TABQ lattice with strong intramolecular charge‐transfer absorption and a built‐in driving force for charge separation. Benefiting from strong broadband absorption and high charge‐carrier mobility, the vapor‐phase‐grown Ni‐TABQ thin films enable photodetection from 350 to 1400 nm under a 3 V bias, with a measurable response tail above 1150 nm, further achieving a responsivity of up to 3.1 A W −1 , a specific detectivity of up to 6.58 × 10 10 Jones (625 nm at ∼85 µW cm −2 ), and a response time of ∼206 µs, while maintaining stable operation at 3 V over 8500 s of continuous cycling. These metrics compare favorably with state‐of‐the‐art broadband photodetectors based on standalone 2D materials, establishing donor–acceptor molecular engineering within the 2D metal‐organic lattice as an effective strategy for advancing high‐performance 2D optoelectronic devices.

  • Open Access

    Organic two-dimensional van der Waals heterostructures

    by Anupam Prasoon, Nguyen Ngan Nguyen, Mike Hambsch, Puja Singhvi, Sophia Terres, Zijie Xiao, Naveen Goyal, Haoyuan Qi, David Mücke, Florian Auras, et al.

    Van der Waals heterostructures based on graphene and inorganic two-dimensional (2D) crystals enable exquisite control of interlayer coupling, and emergent electronic and optical phenomena 1,2 . Extending this concept to organic 2D crystals has been hindered by weak, non-directional interlayer interactions that frustrate lattice registry. Here we introduce a bottom-up strategy for programmable lattice engineering in organic van der Waals heterostructures of 2D polymers. Sequential on-water-surface assembly enables layer-by-layer stacking of chemically distinct 2D polymers with defined lattice registry, stacking sequence and thickness, yielding both lattice-matched and controlled lattice-mismatched heterostructures. Structural characterization reveals commensurate epitaxy in lattice-matched and small-mismatched systems, whereas large-mismatch interfaces exhibit moiré features and strain-relief distortions. Ultrafast spectroscopy demonstrates efficient interfacial charge separation and first-principles calculations reveal built-in electric fields and interfacial potential steps arising from interfacial dipole alignment. Devices exhibit diode-like rectification ratios exceeding 10 7 that systematically decrease with increasing lattice mismatch, establishing organic 2D polymer van der Waals heterostructures as a lattice-engineered platform for (opto)electronic and quantum phenomena.


  • Open Access

    On‐Water Surface Synthesis of 2D Conjugated Metal–Organic Framework Films With Controllable Layer Orientation Enabling High‐Performance Chemiresistive Sensing

    by Jianjun Zhang, Víctor García‐López, Yutong Wu, Shuai Fu, Yucong Chen, Arsh S. Hazrah, Petko Petkov, Mike Hambsch, Feng Ni, Alina Müller, et al.

    Two‐dimensional conjugated metal–organic frameworks (2D c ‐MOFs) offer an appealing platform for electronic devices, particularly chemiresistive sensors, owing to their unique combination of electrical conductivity and intrinsic porosity. However, their pronounced structural and transport anisotropies render device performance highly sensitive to layer orientation, underscoring the need for synthetic strategies that enable the controlled synthesis of well‐aligned 2D c ‐MOF films. Here, we introduce a surfactant monolayer‐assisted on‑water synthesis that programs the layer orientation of conductive Ni‑HHTP (HHTP = 2,3,6,7,10,11‐hexahydroxytriphenylene) films (face‑on vs. edge‑on) over cm 2 ‑scale areas by tuning ligand‐surfactant monolayer electrostatic vs. hydrogen‑bonding interactions. Imaging and scattering techniques unambiguously confirm preferential face‐on and edge‐on layer orientations, while electrical transport and optical pump‐THz probe spectroscopy reveal markedly enhanced intralayer charge transport in face‐on films, motivating their integration into chemiresistive sensing. Chemiresistive NH 3 sensors based on face‑on Ni‑HHTP films achieve a response of 269.8% at 50 ppm and an ultralow detection limit of 8.45 ppb at room temperature, surpassing edge‑on films and previously reported 2D c ‑MOF sensors. These results establish surfactant‐programmed on‐water synthesis as a new route to macroscopic orientation control in 2D c ‐MOFs, enabling deliberate exploitation of their anisotropic charge transport in high‐performance sensing and electronic devices.


  • Open Access

    Ultranarrow nanochannels in a staggered two-dimensional polymer membrane enhance electric double-layer coverage for osmotic energy harvesting

    by Feng Ni, Ye Yang, Shuangjie Zhao, Mahabir Prasad, Naveen Goyal, Xusheng Yang, Dongxu Wang, Jianjun Zhang, Mike Hambsch, Miroslav Polozij, et al.

    Two-dimensional framework membranes (2DFMs) hold great promise for sustainable energy-harvesting technologies, yet their performance is often limited by low electric double-layer (EDL) coverage ( ƞ EDL ) arising from large channels and/or low charge densities. Here, we report an ultrathin ( ~ 50 nm), fully crystalline, ABC-stacked viologen-incorporated 2D polymer membrane (sV2DP) featuring vertically aligned triangular nanochannels ( D eff = 1.36 nm) densely decorated with pyridinium sites ( + 22.4 mC m −2 ). Compared with its non-staggered AA-stacked analogue, sV2DP exhibits a 3.2-fold enhancement in ƞ EDL under a 50-fold KCl gradient, combining high anionic selectivity ( t −  = 0.85) with remarkable selective current density (14.6 kA m −2 ). Simulations reveal that spirally arranged charges generate a unique “screw-like” anion migration pathway, significantly enhancing transmembrane efficiency relative to non-staggered 2DP analogues. When integrated into micro-aperture osmotic power generators, the sV2DP membrane delivered a peak power density of 243 W m −2 under a 50-fold NaCl gradient, placing it among the highest-performing systems.

  • Open Access

    The Role of Ultra‐Thin Buffer Layers for Achieving Ultra‐Low Dark Currents in Single‐Component Organic Photodetectors

    by Anncharlott Kusber, Ying Sun, Jakob Wolansky, Louis Conrad Winkler, Anna‐Lena Hofmann, Fred Kretschmer, Hrisheekesh Thachoth Chandran, Tianyi Zhang, Mike Hambsch, Stefan C. B. Mannsfeld, et al.

    Single‐component organic photodetectors (SC‐OPDs), in which the active layer consists only of one organic material, show higher reproducibility and improved morphological stability. Their simplified architecture also provides a powerful platform for better isolating and understanding interfacial effects. Here, SubNc‐based SC‐OPDs incorporating an ultrathin (3 nm) PhOSubPc interfacial layer to control and probe the interaction between the SubNc absorber and the BPhen electron‐transport layer (ETL) is investigated. The PhOSubPc layer acts as an energetic spacer, effectively decoupling SubNc energetically and morphologically from BPhen while maintaining high device performance. Ambient photoelectron spectroscopy (APS) confirms the energetic isolation of SubNc from BPhen, enabling a clear assessment of interfacial effects in single‐component architectures. The optimized device achieves an EQE of 56% at 0 V, an ultra‐low dark current density of 7.4 · 10 − 1 2 A cm − 2 at −0.1 V, and a specific detectivity D * of 1.69 · 10 12 Jones at 0 V (based on measured noise). Due to their simplified single‐component architecture, these SC‐OPDs offer fundamental insight into interface effects, which result in state‐of‐the‐art SC‐OPD performance.


  • Open Access

    Charge and Spin Transport in Doped Rubrene Thin-Film Crystals

    by Zichen Wang, Stephanie A. Buchholtz, Wooik Jang, Mike Hambsch, Stefan C. B. Mannsfeld, Xinglong Ren, Ian E. Jacobs, Henning Sirringhaus, Hans Kleemann

    Organic semiconductors offer a long-spin coherence time and diffusion length due to the weak spin-orbit and hyperfine interactions in these materials. However, in commonly used lateral field-effect transistor structures, it is challenging to define device dimensions comparable to the spin diffusion length. On the other hand, vertical structures, offering smaller device dimensions, are facing issues due to the low carrier mobilities in the vertical dimension. Here, we investigate spin relaxation in rubrene thin films with a triclinic phase, which are doped with C60F48 by coevaporation. The doping provides an efficient way to generate charge carriers, and their high out-of-plane mobility should enhance long-spin diffusion. Using electron-spin resonance, we show that the spin relaxation is governed by the interaction with the dopant counterions and estimate the spin diffusion length to be ∼200 nm. This is comparable to the film thickness, which should make such doped rubrene films an attractive system for spintronic device applications.


  • Open Access

    Mechanically interlocked monolayer and bilayer two-dimensional polymers with high elastic modulus

    by Ye Yang, André Knapp, David Bodesheim, Alexander Croy, Mike Hambsch, Ilka Hermes, Chandrasekhar Naisa, Darius Pohl, Bernd Rellinghaus, Changsheng Zhao, et al.

    Two-dimensional polymers (2DPs), comprising mono- or multilayer covalent polymeric networks with long-range order in two orthogonal directions, are of considerable interest due to their unique physicochemical properties. However, achieving precise thickness control from monolayer to bilayer, crucial for exploring proximity effect-driven phenomena beyond the monolayer limit, remains synthetically challenging. Here we report the on-water surface synthesis of crystalline mechanically interlocked monolayer and bilayer 2DP (MI-M2DP and MI-B2DP) films by embedding macrocyclic molecules with one and two cavities into 2DP backbones. The incorporation of bulky macrocyclic molecules introduces periodic mechanical bonds that precisely control interlayer interlocking, enabling selective monolayer or bilayer 2DP formation. Both MI-M2DP and MI-B2DP exhibit homogeneous, large-area films with ordered hexagonal pores and high modulus. MI-B2DP demonstrates an exceptionally high effective Young’s modulus of 151 ± 16 GPa (indentation method), surpassing MI-M2DP (90 ± 14 GPa), van der Waals-stacked MI-M2DPs (46 ± 11 GPa) and other reported multilayer 2DPs (<50 GPa). Modelling confirms that the mechanical interlocking minimizes interlayer sliding and reinforces the structure.


  • Open Access

    Chiral two-dimensional conjugated metal-organic frameworks with high spin polarization

    by Shiyi Feng, Yang Lu, Chenchen Wang, Morteza Torabi, Xing Huang, Florian Auras, Ran He, Lukas Sporrer, Paul-Alexander Laval-Schmidt, Xizheng Wu, et al.

    Two-dimensional conjugated metal-organic frameworks have garnered significant research interest as emerging candidates for organic 2D crystal materials. In classical 2D crystals, chirality can give rise to unique physical phenomena; however, the precise implantation of chirality into 2D c-MOFs has yet to be demonstrated. Here, we demonstrate an example of chiral 2D c-MOFs obtained through the side chain-induced chirality amplification strategy to achieve tunable chiral expression, enabling notable chirality amplification. Chiral substitutions induce distortions in the 2,3,7,8,12,13-hexaiminotriindole conjugated ligand along distinct orientations, effectively transferring their chirality to the conjugated backbone. The resulting frameworks exhibit tunable chirality through steric control, where chiral naphthylethyl substitution increases the distortion angle from 2.3° to 7.0°, leading to pronounced chirality amplification. Furthermore, the chiral 2D c-MOFs demonstrate exceptional spin polarization measured by magnetic-conductive atomic force microscopy (mc-AFM), achieving a value as high as 96.9%, placing them among the highest-performing materials reported to date. This work opens new avenues for the design of chiral 2D crystal materials with potential applications in chiral spintronics.


  • Open Access

    On-liquid surface synthesis of diyne-linked two-dimensional polymer crystals

    by Ye Yang, Yufeng Wu, Chang Liu, Mike Hambsch, Tiange Dong, David Bodesheim, Mahabir Prasad, Arezoo Dianat, Thomas D. Kühne, Gianaurelio Cuniberti, et al.

    The synthesis of thin crystalline two-dimensional polymers (2DPs) typically relies on reversible dynamic covalent reactions. While substantial progress has been made in solution-based and interfacial syntheses, achieving 2DPs through irreversible carbon-carbon coupling reactions remains a formidable challenge. Herein, we present an on-liquid surface (a mixture of N,N-dimethylacetamide and water, DMAc-H2O) synthesis method for constructing diyne-linked 2DP (DY2DP) crystals via Glaser coupling, assisted by a perfluoro-surfactant (PFS) monolayer. In-situ spectroscopic and diffraction techniques reveal that the well-ordered PFS monolayer facilitates the accumulation of Cu+ ions and subsequent vertical coupling of acetylenic monomers on the DMAc-H2O surface. Building on these findings, we successfully synthesized micro-scale rod-shaped DY2DP-Por or graphdiyne (GDY) crystals through the polymerization of porphyrin- or benzene-based monomers, respectively. Our study represents a significant advancement in the field of on-liquid surface chemistry and opens up enormous opportunities for constructing C—C bond linked 2DP crystals with unique functionalities.


  • Open Access

    Morphology, Crystallinity, and Electrical Performance of Solution-Processed OFETs Based on a DPP-Based Small Molecule

    by Enrique Caldera-Cruz, Reshma Raveendran, Yevhen Karpov, Felix Talnack, Brigitte Voit, Anton Kiriy, Stefan C. B. Mannsfeld

    In this study, a diketopyrrolopyrrole (DPP)-based small molecule, 3,6-bis­(5′-(2-octyldodecyl)-[2,2’-bithiophen]-5-yl)-2,5-dipropyl-2,5-dihydropyrrolo­[3,4-c]­pyrrole-1,4-dione (DBT-I), was synthesized via Stille coupling. The thin-film morphology, crystallinity, and organic field-effect transistor (OFET) performance of DBT-I were systematically investigated under various solution-processing techniques and solvent environments. Particular emphasis was placed on understanding the influence of processing conditions on film microstructure and their correlation with device performance. It was found that the appropriate combination of solvent, deposition method, and thermal treatment significantly enhances the crystallinity of the DBT-I thin films. Since the electrical properties are influenced by the chemical structure and morphology of the semiconductor, the obtained low-bandgap material was integrated into OFETs fabricated by solution-processing methodologies, such as spin coating and solution-shearing. The optimal performance in OFETs was achieved with the shear-coated DBT-I films, showcasing a mobility of 0.26 cm2 V–1 s–1 and a current on–off ratio of 106. The OFET performance correlated with morphology features such as crystallinity and grain size opens the possibility for a rational optimization of OFET characteristics.