Jiaming Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jiaming Wu has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Shunyuan Xu
Department of Naval Architecture and Ocean Engineering, South China University of Technology, Guangzhou, China
5 shared publications - ChengHua Ma
Guangzhou Shunhai Shipyards Ltd., Guangzhou, China
4 shared publications - Haiyan Lv
Guangzhou Shunhai Shipyards Ltd., Guangzhou 511440, China
4 shared publications - Dongjun Chen
Department of Architecture Engineering, Yangzhou Polytechnic Institute, Yangzhou, China
3 shared publications - Yizhe Dou
Department of Naval Architecture and Ocean Engineering, South China University of Technology, Guangzhou, China
3 shared publications - Haotian Wang
Department of Naval Architecture and Ocean Engineering, South China University of Technology, Guangzhou, China
2 shared publications
Latest Publications
- Open Access
- 10 September 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (9) , 1749
Hydrodynamic Optimization and Motion Stability Enhancement of Underwater Glider Combining CFD and MOPSO
This study investigated the motion stability of underwater gliders and optimized their shape to enhance hydrodynamic performance. Given the critical role of stability in underwater operations, a multi-objective optimization framework was developed, focusing on the geometric configuration of hydrofoils. Computational fluid dynamics (CFD) simulations were employed, with stability assessed based on hydrodynamic moments in roll and pitch motions. A surrogate model was constructed using Kriging interpolation, leveraging Latin hypercube sampling (LHS) to generate 60 design points. Sensitivity analysis identified key shape parameters influencing stability, guiding a multi-objective particle swarm optimization (MOPSO) algorithm to explore optimal design configurations. Improvements of up to 68.91% in roll stability and 51.63% in pitch stability are achieved compared to the original model, which demonstrates the effectiveness of the proposed optimization approach. The findings provide valuable insights into the hydrodynamic design of underwater gliders, facilitating enhanced maneuverability and stability in complex marine environments.
- 10 September 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (9) , 1749
Open AccessHydrodynamic Optimization and Motion Stability Enhancement of Underwater Glider Combining CFD and MOPSO
This study investigated the motion stability of underwater gliders and optimized their shape to enhance hydrodynamic performance. Given the critical role of stability in underwater operations, a multi-objective optimization framework was developed, focusing on the geometric configuration of hydrofoils. Computational fluid dynamics (CFD) simulations were employed, with stability assessed based on hydrodynamic moments in roll and pitch motions. A surrogate model was constructed using Kriging interpolation, leveraging Latin hypercube sampling (LHS) to generate 60 design points. Sensitivity analysis identified key shape parameters influencing stability, guiding a multi-objective particle swarm optimization (MOPSO) algorithm to explore optimal design configurations. Improvements of up to 68.91% in roll stability and 51.63% in pitch stability are achieved compared to the original model, which demonstrates the effectiveness of the proposed optimization approach. The findings provide valuable insights into the hydrodynamic design of underwater gliders, facilitating enhanced maneuverability and stability in complex marine environments.
- Open Access
- 16 August 2024
- Published by Springer Nature in Discover Applied Sciences
- Vol. 6 (9) , 1-18
Hydrodynamic response on trajectory tracking of a tethered underwater robot system under hybrid control algorithms of umbilical cable and propellers
- 16 August 2024
- Published by Springer Nature in Discover Applied Sciences
- Vol. 6 (9) , 1-18
Open AccessHydrodynamic response on trajectory tracking of a tethered underwater robot system under hybrid control algorithms of umbilical cable and propellers
- 17 March 2023
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 18 (6) , 907-921
Numerical study of the vortex-induced vibration of a riser taking into account the variation of the tension
Previous studies of the marine riser VIV have primarily considered the constant values of the tension, but limited work has been done to consider the variations of the tension with riser vibrations. In addition, previous studies have mainly focused on the effect of the inflow velocity profile on a riser VIV, while a study of a riser VIV at a wide range of velocities is still lacking. This study presents a model that can take into account the variation of the tension with riser vibrations. The VIV characteristics of the riser were investigated based on the fluid-structure coupling methods. It is shown that the model that takes into account the variation of the tension is able to accurately capture the bimodal character of the amplitude-ratio curve and the vortex shedding pattern, and to calculate the vibration frequencies accurately.
- 17 March 2023
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 18 (6) , 907-921
Numerical study of the vortex-induced vibration of a riser taking into account the variation of the tension
Previous studies of the marine riser VIV have primarily considered the constant values of the tension, but limited work has been done to consider the variations of the tension with riser vibrations. In addition, previous studies have mainly focused on the effect of the inflow velocity profile on a riser VIV, while a study of a riser VIV at a wide range of velocities is still lacking. This study presents a model that can take into account the variation of the tension with riser vibrations. The VIV characteristics of the riser were investigated based on the fluid-structure coupling methods. It is shown that the model that takes into account the variation of the tension is able to accurately capture the bimodal character of the amplitude-ratio curve and the vortex shedding pattern, and to calculate the vibration frequencies accurately.
- 30 September 2022
- Published by Elsevier in Ocean Engineering
- Vol. 265
The maneuverability and hydrodynamics of a tethered underwater vehicle based on adaptive mesh refinement
- 30 September 2022
- Published by Elsevier in Ocean Engineering
- Vol. 265
The maneuverability and hydrodynamics of a tethered underwater vehicle based on adaptive mesh refinement
- 1 January 2022
- Published by Elsevier in Ocean Engineering
- Vol. 243
Hydrodynamic analysis of a tethered underwater robot with control equipment subjected to cnoidal waves
- 1 January 2022
- Published by Elsevier in Ocean Engineering
- Vol. 243
Hydrodynamic analysis of a tethered underwater robot with control equipment subjected to cnoidal waves
- 30 August 2021
- Published by Springer Nature in Journal of Marine Science and Technology
- Vol. 27 (1) , 824
Correction to: Numerical simulation and hydrodynamics analysis of a tethered underwater robot with control equipment
- 30 August 2021
- Published by Springer Nature in Journal of Marine Science and Technology
- Vol. 27 (1) , 824
Correction to: Numerical simulation and hydrodynamics analysis of a tethered underwater robot with control equipment
- Open Access
- 30 August 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (9) , 940
Thrust Characteristics of Ducted Propeller and Hydrodynamics of an Underwater Vehicle in Control Motions
A numerical technique to simulate the hydrodynamic behavior of ducted propellers attached to an underwater vehicle traveling under the mutually interacting flow fields of the vehicle and the propellers is proposed; the hydrodynamic performance of the propellers and the hydrodynamic loading on the main body of the vehicle when it is in different kinds of motion is investigated numerically. In the research, 3D geometric models of the duct, propeller, and main body of the vehicle are first constructed according to their geometrical features. A computational fluid dynamics (CFD) technique based on the hybrid algorithm of dynamic mesh-nested sliding mesh is applied to solve the Navier–Stokes equations that govern the fluid motion around the duct, propeller, and main body of the vehicle when it is in motion. These equations are solved numerically with the CFD code Fluent. With the proposed numerical simulation technique, the hydrodynamic characteristics of the thrusts generated by the ducted propellers and the loading on the main body in the vehicle system under the mutually interacting flow fields are observed. The results of our numerical simulation indicate that the hybrid algorithm of dynamic mesh-nested sliding mesh can simulate multiple degrees of freedom of motion in underwater vehicle systems. In different motion states, the main body exerts a significant influence on the investigated flow fields; during the vehicle motions, negative wakes are formed on both sides of the main body, which lead to a decrease in the thrusts generated by the propellers on both sides. The thrust of the middle propeller is greater than that of the normal single one because of the obstructing effect in the tunnel caused by the main body.
- 30 August 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (9) , 940
Open AccessThrust Characteristics of Ducted Propeller and Hydrodynamics of an Underwater Vehicle in Control Motions
A numerical technique to simulate the hydrodynamic behavior of ducted propellers attached to an underwater vehicle traveling under the mutually interacting flow fields of the vehicle and the propellers is proposed; the hydrodynamic performance of the propellers and the hydrodynamic loading on the main body of the vehicle when it is in different kinds of motion is investigated numerically. In the research, 3D geometric models of the duct, propeller, and main body of the vehicle are first constructed according to their geometrical features. A computational fluid dynamics (CFD) technique based on the hybrid algorithm of dynamic mesh-nested sliding mesh is applied to solve the Navier–Stokes equations that govern the fluid motion around the duct, propeller, and main body of the vehicle when it is in motion. These equations are solved numerically with the CFD code Fluent. With the proposed numerical simulation technique, the hydrodynamic characteristics of the thrusts generated by the ducted propellers and the loading on the main body in the vehicle system under the mutually interacting flow fields are observed. The results of our numerical simulation indicate that the hybrid algorithm of dynamic mesh-nested sliding mesh can simulate multiple degrees of freedom of motion in underwater vehicle systems. In different motion states, the main body exerts a significant influence on the investigated flow fields; during the vehicle motions, negative wakes are formed on both sides of the main body, which lead to a decrease in the thrusts generated by the propellers on both sides. The thrust of the middle propeller is greater than that of the normal single one because of the obstructing effect in the tunnel caused by the main body.
- Open Access
- 13 August 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (8) , 874
Numerical Simulation of Depth Tracking Control of an Underwater Towed System Coupled with Wave–Ship Interference
This paper presents a numerical study of the depth tracking control for an underwater towed system under wave–ship interference condition. To overcome the laminations of ignoring the hydrodynamic factors and wave–ship interference in the existing simulation model for the depth tracking operation of the underwater towed system, a numerical model combining the control system with the computational fluid dynamics (CFD) method based on the overset mesh technique is explored and constructed; the influence of towing ship and head waves is introduced into the numerical analysis of the underwater towed system; a depth control system based on the center of gravity adjustment is proposed and its control characteristics are discussed. The fluid motion around the towed vehicle and the towing ship is governed by the Navier–Stokes equations, and the overset mesh technique is applied for the numerical solution of the equations. The towing cable connecting the towed vehicle and towing ship is governed by the quasi-steady-state catenary equations. The depth tracking controller adjusting the longitudinal position of a shifting weight is constructed based on the proportional–integral–derivative (PID) algorithm. The simulation results show that the numerical simulation system is practicable, and the depth tracking control system is feasible, effective, and robust.
- 13 August 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (8) , 874
Open AccessNumerical Simulation of Depth Tracking Control of an Underwater Towed System Coupled with Wave–Ship Interference
This paper presents a numerical study of the depth tracking control for an underwater towed system under wave–ship interference condition. To overcome the laminations of ignoring the hydrodynamic factors and wave–ship interference in the existing simulation model for the depth tracking operation of the underwater towed system, a numerical model combining the control system with the computational fluid dynamics (CFD) method based on the overset mesh technique is explored and constructed; the influence of towing ship and head waves is introduced into the numerical analysis of the underwater towed system; a depth control system based on the center of gravity adjustment is proposed and its control characteristics are discussed. The fluid motion around the towed vehicle and the towing ship is governed by the Navier–Stokes equations, and the overset mesh technique is applied for the numerical solution of the equations. The towing cable connecting the towed vehicle and towing ship is governed by the quasi-steady-state catenary equations. The depth tracking controller adjusting the longitudinal position of a shifting weight is constructed based on the proportional–integral–derivative (PID) algorithm. The simulation results show that the numerical simulation system is practicable, and the depth tracking control system is feasible, effective, and robust.
- 11 August 2021
- Published by Springer Nature in Journal of Marine Science and Technology
- Vol. 27 (1) , 368-382
Numerical simulation and hydrodynamics analysis of a tethered underwater robot with control equipment
- 11 August 2021
- Published by Springer Nature in Journal of Marine Science and Technology
- Vol. 27 (1) , 368-382
Numerical simulation and hydrodynamics analysis of a tethered underwater robot with control equipment
- Open Access
- 16 July 2021
- Published by ASME International
Hydrodynamic Response of Tethered Underwater Robot by Feed-Forward and Incremental Pid Control Techniques
The trajectory of tethered underwater robot is usually controlled by actuating the rotating speeds of control propellers attached to the robot and/or adjusting the length of umbilical cable. When the trajectory control problem of a tethered underwater robot is studied, it is necessary to couple the main body of underwater robot, umbilical cable and control propellers together
- 16 July 2021
- Published by ASME International
Open AccessHydrodynamic Response of Tethered Underwater Robot by Feed-Forward and Incremental Pid Control Techniques
The trajectory of tethered underwater robot is usually controlled by actuating the rotating speeds of control propellers attached to the robot and/or adjusting the length of umbilical cable. When the trajectory control problem of a tethered underwater robot is studied, it is necessary to couple the main body of underwater robot, umbilical cable and control propellers together