Ivan Sever
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ivan Sever has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Ivan Kožić
Institute for Tourism, Zagreb, Croatia
4 shared publications - Eva Klarić
Department of Endodontics and Restorative Dentistry, School of Dental Medicine, University of Zagreb, 10000 Zagreb, Croatia
2 shared publications - Petar Sorić
Ekonomski fakultet, Sveučilište u Zagrebu, Zagreb, Hrvatska
2 shared publications - Zrinka Tarle
Department of Endodontics and Restorative Dentistry, School of Dental Medicine, University of Zagreb, 10000 Zagreb, Croatia
2 shared publications - Ana Perišić
Faculty of Science, University of Split, Split, Croatia
1 shared publication - Ante Mandić
Faculty of Economics, Business and Tourism, University of Split, Split, Croatia
1 shared publication
Latest Publications
- 13 October 2026
- Published by Springer Nature in SN Computer Science
- Vol. 7 (7) , 808
Variable Importance Visualization for Logit Models: Distinguishing Prime and Suppressor Effects
- 13 October 2026
- Published by Springer Nature in SN Computer Science
- Vol. 7 (7) , 808
Variable Importance Visualization for Logit Models: Distinguishing Prime and Suppressor Effects
- Open Access
- 9 December 2025
- Published by Springer Nature in Information Technology & Tourism
- Vol. 28 (1) , 6
A six-phase AI-expert framework for evaluating policy coherence in sustainable tourism
- 9 December 2025
- Published by Springer Nature in Information Technology & Tourism
- Vol. 28 (1) , 6
Open AccessA six-phase AI-expert framework for evaluating policy coherence in sustainable tourism
- Open Access
- 12 March 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (3) , 131
A Year-Long Comparison of Dentin Bond Strength Using the Co-Curing Technique and Conventional Adhesive Application
Objective: One of the suggested methods for lowering polymerization shrinkage and improving the marginal sealing of restorations is the simultaneous light polymerization of the adhesive system and the first layer of the composite material, i.e., the co-curing method. This study investigates how different adhesive polymerization techniques, adhesive systems, tooth section depths, tooth types, and sample aging affect dentin bond strength. Methodology: This experiment tests three adhesive systems, G-Premio Bond (GC), Clearfil SE Bond 2 (Kuraray), and Adper Single Bond 2 (3M ESPE), using two polymerization techniques, namely, separate composite polymerization and simultaneous curing of the composite (“co-curing”). A total of 480 dentin samples are prepared and assigned to 24 groups (3 adhesives × 2 curing methods × 4 aging times). The shear bond strength is measured after one month, three months, six months, and one year, using an UltraTester. The statistical analyses include an ANOVA and Weibull analysis. Results: The separate polymerization of the adhesive and composite shows a significantly higher bond strength than that achieved through co-curing. Significant differences (p < 0.001) exist among adhesives, with Clearfil SE Bond 2 showing the highest bond strength. The bond strength decreases over time. Occlusal dentin has a higher bond strength than radicular dentin. There is no statistically significant difference in the bond strength between the maxillary and mandibular third molars. After one and three months of aging, the experimental groups with the highest average bond strength do not show the highest level of material reliability. Conclusion: The co-curing technique consistently results in a lower bond strength across all the adhesive systems compared to conventional separate polymerization.
- 12 March 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (3) , 131
Open AccessA Year-Long Comparison of Dentin Bond Strength Using the Co-Curing Technique and Conventional Adhesive Application
Objective: One of the suggested methods for lowering polymerization shrinkage and improving the marginal sealing of restorations is the simultaneous light polymerization of the adhesive system and the first layer of the composite material, i.e., the co-curing method. This study investigates how different adhesive polymerization techniques, adhesive systems, tooth section depths, tooth types, and sample aging affect dentin bond strength. Methodology: This experiment tests three adhesive systems, G-Premio Bond (GC), Clearfil SE Bond 2 (Kuraray), and Adper Single Bond 2 (3M ESPE), using two polymerization techniques, namely, separate composite polymerization and simultaneous curing of the composite (“co-curing”). A total of 480 dentin samples are prepared and assigned to 24 groups (3 adhesives × 2 curing methods × 4 aging times). The shear bond strength is measured after one month, three months, six months, and one year, using an UltraTester. The statistical analyses include an ANOVA and Weibull analysis. Results: The separate polymerization of the adhesive and composite shows a significantly higher bond strength than that achieved through co-curing. Significant differences (p < 0.001) exist among adhesives, with Clearfil SE Bond 2 showing the highest bond strength. The bond strength decreases over time. Occlusal dentin has a higher bond strength than radicular dentin. There is no statistically significant difference in the bond strength between the maxillary and mandibular third molars. After one and three months of aging, the experimental groups with the highest average bond strength do not show the highest level of material reliability. Conclusion: The co-curing technique consistently results in a lower bond strength across all the adhesive systems compared to conventional separate polymerization.
- 26 July 2024
- Published by Institute for Tourism in Tourism
- Vol. 72 (4) , 524-537
Assessing the Tourism-Led Inflation Hypothesis
The tourism-led economic growth hypothesis is one of the most investigated concepts in tourism economics literature. It has been verified by many empirical studies so far. Since the concept of growth-driven inflation belongs to the fundamentals of macroeconomic theory, one could reasonably assume inflation can also be led by tourism development. The question, however, is through what mechanisms could it be adequately identified and assessed. If anywhere, tourism-led inflation could first and foremost be perceived in a country with a significant economic impact of tourism. We take one of such countries as a case study and use the structural vector autoregression methodology to examine tourism-led inflation. The presented empirical framework may also serve as a role model applicable to other countries and regions.
- 26 July 2024
- Published by Institute for Tourism in Tourism
- Vol. 72 (4) , 524-537
Assessing the Tourism-Led Inflation Hypothesis
The tourism-led economic growth hypothesis is one of the most investigated concepts in tourism economics literature. It has been verified by many empirical studies so far. Since the concept of growth-driven inflation belongs to the fundamentals of macroeconomic theory, one could reasonably assume inflation can also be led by tourism development. The question, however, is through what mechanisms could it be adequately identified and assessed. If anywhere, tourism-led inflation could first and foremost be perceived in a country with a significant economic impact of tourism. We take one of such countries as a case study and use the structural vector autoregression methodology to examine tourism-led inflation. The presented empirical framework may also serve as a role model applicable to other countries and regions.
- Open Access
- 1 May 2022
- Published by Walter de Gruyter GmbH in Zagreb International Review of Economics and Business
- Vol. 25 (1) , 95-110
Tourism and Business Cycles: Does the Relationship Fade Away?
For a long time, tourism has been considered a social, economic and environmental phenomenon that provides products and services whose consumption is supposed to surge in periods of economic growth and wane in periods of slowdown, thereby acting procyclical. To examine this hypothesis, we have explored the exact behavior of tourism activity before and after the last big economic crisis - the Great Recession 2008 followed by the European Sovereign Debt Crisis. We have applied a methodology of business cycle analysis to investigate the relationship between the cyclical components of GDP and tourism nights spent by the residents of 23 EU member states in the 1996-2018 period. We report an important structural change in the relationship between tourism and business cycles. The relationship became apparently weaker over time and finally became insignificant after the end of the crisis, suggesting a smooth structural change. Our findings suggest uncertainty as to how tourism activity would restore its usual dynamics following the end of the current COVID-19 pandemic recession.
- 1 May 2022
- Published by Walter de Gruyter GmbH in Zagreb International Review of Economics and Business
- Vol. 25 (1) , 95-110
Open AccessTourism and Business Cycles: Does the Relationship Fade Away?
For a long time, tourism has been considered a social, economic and environmental phenomenon that provides products and services whose consumption is supposed to surge in periods of economic growth and wane in periods of slowdown, thereby acting procyclical. To examine this hypothesis, we have explored the exact behavior of tourism activity before and after the last big economic crisis - the Great Recession 2008 followed by the European Sovereign Debt Crisis. We have applied a methodology of business cycle analysis to investigate the relationship between the cyclical components of GDP and tourism nights spent by the residents of 23 EU member states in the 1996-2018 period. We report an important structural change in the relationship between tourism and business cycles. The relationship became apparently weaker over time and finally became insignificant after the end of the crisis, suggesting a smooth structural change. Our findings suggest uncertainty as to how tourism activity would restore its usual dynamics following the end of the current COVID-19 pandemic recession.
- Open Access
- 1 January 2022
- Published by Ekonomski fakultet u Osijeku in Ekonomski vjesnik
- Vol. 35 (2) , 417-428
Empirical assessment of tourism-generated employment
Purpose: This paper aims to examine the important concepts and challenges emerging from an assessment of the employment generated by tourism activity. Methodology: Standard methodology for the compilation of the tourism satellite account is used. The case study is Croatia, a small European country whose economy is immensely driven by tourism, thereby representing a particularly suitable research example. Results: The paper reports and discusses all practical issues related to the process of assessment and measurement of tourism-generated employment in a small tourism-driven economy. Conclusion: The assessment of tourism-generated employment is far from being analyzed and documented as thoroughly as the assessment of tourism-generated GDP. A common impression is that researchers have hitherto been too busy measuring tourism-generated GDP, thereby paying insufficient attention to the most important manifestation of GDP creation - employment. Therefore, this paper aims to fill, at least partially, this huge gap in the current literature.
- 1 January 2022
- Published by Ekonomski fakultet u Osijeku in Ekonomski vjesnik
- Vol. 35 (2) , 417-428
Open AccessEmpirical assessment of tourism-generated employment
Purpose: This paper aims to examine the important concepts and challenges emerging from an assessment of the employment generated by tourism activity. Methodology: Standard methodology for the compilation of the tourism satellite account is used. The case study is Croatia, a small European country whose economy is immensely driven by tourism, thereby representing a particularly suitable research example. Results: The paper reports and discusses all practical issues related to the process of assessment and measurement of tourism-generated employment in a small tourism-driven economy. Conclusion: The assessment of tourism-generated employment is far from being analyzed and documented as thoroughly as the assessment of tourism-generated GDP. A common impression is that researchers have hitherto been too busy measuring tourism-generated GDP, thereby paying insufficient attention to the most important manifestation of GDP creation - employment. Therefore, this paper aims to fill, at least partially, this huge gap in the current literature.
- Open Access
Effect of Conventional Adhesive Application or Co-Curing Technique on Dentin Bond Strength
The aim of this in vitro study was to assess the effect of two different adhesive application methods on shear dentin bond strength (ISO 29022) using three various adhesive systems. A mid-coronal section of 77 intact third human molars with fully developed apices was made to create flat bonding substrates. The materials used in the study were Excite F (Ivoclar Vivadent), Prime&Bond Universal (Dentsply Sirona) and G-Premio Bond (GC). The application of each adhesion system was performed in two different ways. In the first group, the bonding agent was light cured immediately after the application (conventional method), while in the second group the adhesive and composite were cured concurrently (“co-curing” method). A total of 180 specimens were prepared (3 adhesives × 2 method of application × 30 specimens per experimental group), stored at 37 °C in distilled water and fractured in shear mode after 1 week. Statistical analysis was performed using ANOVA and Weibull statistics. The highest bond strength was obtained for Prime&Bond conventional (21.7 MPa), whilst the lowest bond strength was observed when co-curing was used (particularly, Excite F 12.2 MPa). The results showed a significant difference between conventional and co-curing methods in all materials. According to reliability analysis, the co-curing method diminished bond reliability. Different application techniques exhibit different bond strengths to dentin.
Open AccessEffect of Conventional Adhesive Application or Co-Curing Technique on Dentin Bond Strength
The aim of this in vitro study was to assess the effect of two different adhesive application methods on shear dentin bond strength (ISO 29022) using three various adhesive systems. A mid-coronal section of 77 intact third human molars with fully developed apices was made to create flat bonding substrates. The materials used in the study were Excite F (Ivoclar Vivadent), Prime&Bond Universal (Dentsply Sirona) and G-Premio Bond (GC). The application of each adhesion system was performed in two different ways. In the first group, the bonding agent was light cured immediately after the application (conventional method), while in the second group the adhesive and composite were cured concurrently (“co-curing” method). A total of 180 specimens were prepared (3 adhesives × 2 method of application × 30 specimens per experimental group), stored at 37 °C in distilled water and fractured in shear mode after 1 week. Statistical analysis was performed using ANOVA and Weibull statistics. The highest bond strength was obtained for Prime&Bond conventional (21.7 MPa), whilst the lowest bond strength was observed when co-curing was used (particularly, Excite F 12.2 MPa). The results showed a significant difference between conventional and co-curing methods in all materials. According to reliability analysis, the co-curing method diminished bond reliability. Different application techniques exhibit different bond strengths to dentin.
- 24 January 2019
- Published by Wiley in Journal of Evaluation in Clinical Practice
- Vol. 25 (5) , 843-849
Estimating willingness‐to‐pay for health care: A discrete choice experiment accounting for non‐attendance to the cost attribute
Rationale, aims, and objectives: The literature suggests that discrete choice experiments (DCEs) are a preferable method for estimating willingness‐to‐pay (WTP) values, as they may avoid some biases often observed in contingent valuation surveys, such as protest and strategic behaviour. However, the choice studies have demonstrated that attribute non‐attendance may be a serious issue that leads to biased WTP estimates.Method: A DCE was used to estimate patients' WTP for dental care at the dental school clinic. The endogenous attribute attendance (EAA) model was used to estimate WTP for dental care attributes, while accounting for non‐attendance to the cost attribute.Results: The EAA model revealed that almost every second respondent had ignored the cost attribute when making choices, indicating that patients were very sensitive to other characteristics of dental care. Dental care providers should pay particular attention to providing a detailed explanation of treatment to their patients, as this was the most valued attribute of dental care. The welfare estimates from the EAA model, which accounted for non‐attendance to the cost attribute, were more than two times lower than welfare estimates from a traditional multinomial logit model and mixed logit model estimated in WTP space.Conclusions: The findings raise concerns for derived WTP estimates in DCE studies that did not consider non‐attendance to the cost attribute during the estimation process. Non‐attendance to the cost attribute overestimates WTP values, even if being motivated by the true preferences of respondents.
- 24 January 2019
- Published by Wiley in Journal of Evaluation in Clinical Practice
- Vol. 25 (5) , 843-849
Estimating willingness‐to‐pay for health care: A discrete choice experiment accounting for non‐attendance to the cost attribute
Rationale, aims, and objectives: The literature suggests that discrete choice experiments (DCEs) are a preferable method for estimating willingness‐to‐pay (WTP) values, as they may avoid some biases often observed in contingent valuation surveys, such as protest and strategic behaviour. However, the choice studies have demonstrated that attribute non‐attendance may be a serious issue that leads to biased WTP estimates.Method: A DCE was used to estimate patients' WTP for dental care at the dental school clinic. The endogenous attribute attendance (EAA) model was used to estimate WTP for dental care attributes, while accounting for non‐attendance to the cost attribute.Results: The EAA model revealed that almost every second respondent had ignored the cost attribute when making choices, indicating that patients were very sensitive to other characteristics of dental care. Dental care providers should pay particular attention to providing a detailed explanation of treatment to their patients, as this was the most valued attribute of dental care. The welfare estimates from the EAA model, which accounted for non‐attendance to the cost attribute, were more than two times lower than welfare estimates from a traditional multinomial logit model and mixed logit model estimated in WTP space.Conclusions: The findings raise concerns for derived WTP estimates in DCE studies that did not consider non‐attendance to the cost attribute during the estimation process. Non‐attendance to the cost attribute overestimates WTP values, even if being motivated by the true preferences of respondents.
- 24 October 2018
- Published by Wiley in International Journal of Tourism Research
- Vol. 21 (1) , 97-107
Interdependence of international tourism demand for Mediterranean countries: Impact of demand shocks
Interdependence of tourism demand is an underexplored topic in tourism economics literature. Besides the traditional procedure of cross elasticities calculation, shock analysis could be used to investigate the interconnections of tourism flows. This paper conducts an econometric analysis of international tourism demand for 10 most developed Mediterranean destinations: Croatia, Cyprus, France, Greece, Italy, Malta, Morocco, Spain, Tunisia, and Turkey. In particular, a vector autoregression model is estimated for each pair of 10 countries. Impulse response functions are applied to investigate how a shock in tourism demand for one country impacts the tourism demand for its substitutes and complements.
- 24 October 2018
- Published by Wiley in International Journal of Tourism Research
- Vol. 21 (1) , 97-107
Interdependence of international tourism demand for Mediterranean countries: Impact of demand shocks
Interdependence of tourism demand is an underexplored topic in tourism economics literature. Besides the traditional procedure of cross elasticities calculation, shock analysis could be used to investigate the interconnections of tourism flows. This paper conducts an econometric analysis of international tourism demand for 10 most developed Mediterranean destinations: Croatia, Cyprus, France, Greece, Italy, Malta, Morocco, Spain, Tunisia, and Turkey. In particular, a vector autoregression model is estimated for each pair of 10 countries. Impulse response functions are applied to investigate how a shock in tourism demand for one country impacts the tourism demand for its substitutes and complements.
- 24 March 2016
- Published by Taylor & Francis in Journal of Travel & Tourism Marketing
- Vol. 34 (2) , 209-221
An Investigation of the Relationship Between Destination Branding and Destination Competitiveness
Empirical research focusing on the relationship between destination branding and destination competitiveness has so far been lacking. Even though destination brand is partially incorporated into the two most prominent theoretical models of destination competitiveness, there is still a need for understanding the role that destination branding plays in achieving destination competitiveness. For this reason, this study proposes a theory-based research instrument that joins the branding process implementation index and competitiveness measured by customer satisfaction. The proposed instrument is tested in the context of Croatian coastal destinations. The results confirm that a well-implemented destination branding process increases destination competitiveness.
- 24 March 2016
- Published by Taylor & Francis in Journal of Travel & Tourism Marketing
- Vol. 34 (2) , 209-221
An Investigation of the Relationship Between Destination Branding and Destination Competitiveness
Empirical research focusing on the relationship between destination branding and destination competitiveness has so far been lacking. Even though destination brand is partially incorporated into the two most prominent theoretical models of destination competitiveness, there is still a need for understanding the role that destination branding plays in achieving destination competitiveness. For this reason, this study proposes a theory-based research instrument that joins the branding process implementation index and competitiveness measured by customer satisfaction. The proposed instrument is tested in the context of Croatian coastal destinations. The results confirm that a well-implemented destination branding process increases destination competitiveness.