Xu Cheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xu Cheng has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Yihui Zhang
Applied Mechanics Laboratory, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, P.R. China
11 shared publications - Fan Zhang
Huazhong University of Science and Technology
8 shared publications - Ke Bai
Applied Mechanics Laboratory, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, P.R. China
4 shared publications - Zhangming Shen
Applied Mechanics Laboratory, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, P.R. China
4 shared publications - Zhaoguo Xue
National Key Laboratory of Strength and Structural Integrity Institute of Solid Mechanics School of Aeronautic Science and Engineering Beihang University Beijing People's Republic of China
4 shared publications - Honglie Song
Applied Mechanics Laboratory Department of Engineering Mechanics Center for Flexible Electronics Technology Tsinghua University Beijing 100084 China
3 shared publications
Latest Publications
- Open Access
- 10 July 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12  (28) , eaef0161
A multifunctional porous interface bridging 3D architected electronics with skin
Skin-integrated flexible electronics are rapidly advancing from short-term use to continuous, long-term wear to meet the demands of health monitoring, wound healing, and skin disease treatment. While three-dimensionally (3D) architected devices offer sensing capabilities and outstanding mechanical performances, the development of a conformal interface between these 3D electronic devices and skin for long-term comfortable wear remains challenging due to their geometric complexity and mechanical fragility. Here, we introduce a multifunctional porous interface that bridges 3D flexible electronics with skin through engineered microporous networks. Such a porous design enhances elastic stretchability and electrical reliability while providing moisture permeability, thermal buffering, impact mitigation, and drug delivery capability. Stiffness reduction and localized pore-wall-shell buckling synergistically underpin the outstanding mechanical resilience under large deformations. The proposed multifunctional porous interface allows development of a 3D closed-loop wound administration patch capable of multimodal sensing and on-demand therapy, markedly accelerating scald wound healing in vivo.
- 10 July 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12  (28) , eaef0161
Open AccessA multifunctional porous interface bridging 3D architected electronics with skin
Skin-integrated flexible electronics are rapidly advancing from short-term use to continuous, long-term wear to meet the demands of health monitoring, wound healing, and skin disease treatment. While three-dimensionally (3D) architected devices offer sensing capabilities and outstanding mechanical performances, the development of a conformal interface between these 3D electronic devices and skin for long-term comfortable wear remains challenging due to their geometric complexity and mechanical fragility. Here, we introduce a multifunctional porous interface that bridges 3D flexible electronics with skin through engineered microporous networks. Such a porous design enhances elastic stretchability and electrical reliability while providing moisture permeability, thermal buffering, impact mitigation, and drug delivery capability. Stiffness reduction and localized pore-wall-shell buckling synergistically underpin the outstanding mechanical resilience under large deformations. The proposed multifunctional porous interface allows development of a 3D closed-loop wound administration patch capable of multimodal sensing and on-demand therapy, markedly accelerating scald wound healing in vivo.
- 14 July 2024
- Published by Elsevier in Journal of the Mechanics and Physics of Solids
- Vol. 191
Curvature programming of freestanding 3D mesostructures and flexible electronics based on bilayer ribbon networks
- 14 July 2024
- Published by Elsevier in Journal of the Mechanics and Physics of Solids
- Vol. 191
Curvature programming of freestanding 3D mesostructures and flexible electronics based on bilayer ribbon networks
- 27 July 2023
- Published by Elsevier in Journal of the Mechanics and Physics of Solids
- Vol. 179
Deep learning aided inverse design of the buckling-guided assembly for 3D frame structures
- 27 July 2023
- Published by Elsevier in Journal of the Mechanics and Physics of Solids
- Vol. 179
Deep learning aided inverse design of the buckling-guided assembly for 3D frame structures
- Top Cited Papers
- 24 March 2023
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 379  (6638) , 1225-1232
Programming 3D curved mesosurfaces using microlattice designs
Cellular microstructures form naturally in many living organisms (e.g., flowers and leaves) to provide vital functions in synthesis, transport of nutrients, and regulation of growth. Although heterogeneous cellular microstructures are believed to play pivotal roles in their three-dimensional (3D) shape formation, programming 3D curved mesosurfaces with cellular designs remains elusive in man-made systems. We report a rational microlattice design that allows transformation of 2D films into programmable 3D curved mesosurfaces through mechanically guided assembly. Analytical modeling and a machine learning–based computational approach serve as the basis for shape programming and determine the heterogeneous 2D microlattice patterns required for target 3D curved surfaces. About 30 geometries are presented, including both regular and biological mesosurfaces. Demonstrations include a conformable cardiac electronic device, a stingray-like dual mode actuator, and a 3D electronic cell scaffold.
- 24 March 2023
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 379  (6638) , 1225-1232
Top Cited PapersProgramming 3D curved mesosurfaces using microlattice designs
Cellular microstructures form naturally in many living organisms (e.g., flowers and leaves) to provide vital functions in synthesis, transport of nutrients, and regulation of growth. Although heterogeneous cellular microstructures are believed to play pivotal roles in their three-dimensional (3D) shape formation, programming 3D curved mesosurfaces with cellular designs remains elusive in man-made systems. We report a rational microlattice design that allows transformation of 2D films into programmable 3D curved mesosurfaces through mechanically guided assembly. Analytical modeling and a machine learning–based computational approach serve as the basis for shape programming and determine the heterogeneous 2D microlattice patterns required for target 3D curved surfaces. About 30 geometries are presented, including both regular and biological mesosurfaces. Demonstrations include a conformable cardiac electronic device, a stingray-like dual mode actuator, and a 3D electronic cell scaffold.
- Top Cited PapersOpen Access
- 12 August 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8  (32) , eabm6922
Assembly of complex 3D structures and electronics on curved surfaces
Electronic devices with engineered three-dimensional (3D) architectures are indispensable for frictional-force sensing, wide-field optical imaging, and flow velocity measurement. Recent advances in mechanically guided assembly established deterministic routes to 3D structures in high-performance materials, through controlled rolling/folding/buckling deformations. The resulting 3D structures are, however, mostly formed on planar substrates and cannot be transferred directly onto another curved substrate. Here, we introduce an ordered assembly strategy to allow transformation of 2D thin films into sophisticated 3D structures on diverse curved surfaces. The strategy leverages predefined mechanical loadings that deform curved elastomer substrates into flat/cylindrical configurations, followed by an additional uniaxial/biaxial prestretch to drive buckling-guided assembly. Release of predefined loadings results in an ordered assembly that can be accurately captured by mechanics modeling, as illustrated by dozens of complex 3D structures assembled on curved substrates. Demonstrated applications include tunable dipole antennas, flow sensors inside a tube, and integrated electronic systems capable of conformal integration with the heart.
- 12 August 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8  (32) , eabm6922
Top Cited PapersOpen AccessAssembly of complex 3D structures and electronics on curved surfaces
Electronic devices with engineered three-dimensional (3D) architectures are indispensable for frictional-force sensing, wide-field optical imaging, and flow velocity measurement. Recent advances in mechanically guided assembly established deterministic routes to 3D structures in high-performance materials, through controlled rolling/folding/buckling deformations. The resulting 3D structures are, however, mostly formed on planar substrates and cannot be transferred directly onto another curved substrate. Here, we introduce an ordered assembly strategy to allow transformation of 2D thin films into sophisticated 3D structures on diverse curved surfaces. The strategy leverages predefined mechanical loadings that deform curved elastomer substrates into flat/cylindrical configurations, followed by an additional uniaxial/biaxial prestretch to drive buckling-guided assembly. Release of predefined loadings results in an ordered assembly that can be accurately captured by mechanics modeling, as illustrated by dozens of complex 3D structures assembled on curved substrates. Demonstrated applications include tunable dipole antennas, flow sensors inside a tube, and integrated electronic systems capable of conformal integration with the heart.
- Top Cited PapersOpen Access
- 18 March 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8  (11) , eabm3785
Highly-integrated, miniaturized, stretchable electronic systems based on stacked multilayer network materials
Elastic stretchability and function density represent two key figures of merits for stretchable inorganic electronics. Various design strategies have been reported to provide both high levels of stretchability and function density, but the function densities are mostly below 80%. While the stacked device layout can overcome this limitation, the soft elastomers used in previous studies could highly restrict the deformation of stretchable interconnects. Here, we introduce stacked multilayer network materials as a general platform to incorporate individual components and stretchable interconnects, without posing any essential constraint to their deformations. Quantitative analyses show a substantial enhancement (e.g., by ~7.5 times) of elastic stretchability of serpentine interconnects as compared to that based on stacked soft elastomers. The proposed strategy allows demonstration of a miniaturized electronic system (11 mm by 10 mm), with a moderate elastic stretchability (~20%) and an unprecedented areal coverage (~110%), which can serve as compass display, somatosensory mouse, and physiological-signal monitor.
- 18 March 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8  (11) , eabm3785
Top Cited PapersOpen AccessHighly-integrated, miniaturized, stretchable electronic systems based on stacked multilayer network materials
Elastic stretchability and function density represent two key figures of merits for stretchable inorganic electronics. Various design strategies have been reported to provide both high levels of stretchability and function density, but the function densities are mostly below 80%. While the stacked device layout can overcome this limitation, the soft elastomers used in previous studies could highly restrict the deformation of stretchable interconnects. Here, we introduce stacked multilayer network materials as a general platform to incorporate individual components and stretchable interconnects, without posing any essential constraint to their deformations. Quantitative analyses show a substantial enhancement (e.g., by ~7.5 times) of elastic stretchability of serpentine interconnects as compared to that based on stacked soft elastomers. The proposed strategy allows demonstration of a miniaturized electronic system (11 mm by 10 mm), with a moderate elastic stretchability (~20%) and an unprecedented areal coverage (~110%), which can serve as compass display, somatosensory mouse, and physiological-signal monitor.
- 8 March 2021
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 118  (11)
Rapidly deployable and morphable 3D mesostructures with applications in multimodal biomedical devices
Significance: The ability to miniaturize deployable and morphable structures could significantly broaden their applications in biomedical, healthcare, and electronics devices, but remains to be very challenging, due to the difficulty to achieve considerable actuation deformations at small scales (e.g., several millimeters). Here, we present actuation schemes and design strategies to enable assembly of three-dimensional (3D) mesostructures that actively, rapidly, and reversibly deform (by nearly an order of amplitude in size) and switch among various stable states. These schemes provide routes to multimodal devices that actively change their functions following changes in shapes. A skin sensor that can actively switch between the deep and shallow sensing modes serves as an example to demonstrate the promising potential toward developments of multimodal biomedical devices.
- 8 March 2021
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 118  (11)
Rapidly deployable and morphable 3D mesostructures with applications in multimodal biomedical devices
Significance: The ability to miniaturize deployable and morphable structures could significantly broaden their applications in biomedical, healthcare, and electronics devices, but remains to be very challenging, due to the difficulty to achieve considerable actuation deformations at small scales (e.g., several millimeters). Here, we present actuation schemes and design strategies to enable assembly of three-dimensional (3D) mesostructures that actively, rapidly, and reversibly deform (by nearly an order of amplitude in size) and switch among various stable states. These schemes provide routes to multimodal devices that actively change their functions following changes in shapes. A skin sensor that can actively switch between the deep and shallow sensing modes serves as an example to demonstrate the promising potential toward developments of multimodal biomedical devices.
- 25 January 2021
- Published by IOP Publishing in Nanotechnology
- Vol. 32  (15) , 155506
Bioinspired design and assembly of a multilayer cage-shaped sensor capable of multistage load bearing and collapse prevention
Flexible bioinspired mesostructures and electronic devices have recently attracted intense attention because of their widespread application in microelectromechanical systems (MEMS), reconfigurable electronics, health-monitoring systems, etc. Among various geometric constructions, 3D flexible bioinspired architectures are of particular interest, since they can provide new functions and capabilities, compared to their 2D counterparts. However, 3D electronic device systems usually undergo complicated mechanical loading in practical operation, resulting in complex deformation modes and elusive failure mechanisms. The development of mechanically robust flexible 3D electronics that can undergo extreme compression without irreversible collapse or fracture remains a challenge. Here, inspired by the multilayer mesostructure of Enhydra lutris fur, we introduce the design and assembly of multilayer cage architectures capable of multistage load bearing and collapse prevention under large out-of-plane compression. Combined in situ experiments and mechanical modeling show that the multistage mechanical responses of the developed bionic architectures can be fine-tuned by tailoring the microstructural geometries. The integration of functional layers of gold and piezoelectric polymer allows the development of a flexible multifunctional sensor that can simultaneously achieve the dynamic sensing of compressive forces and temperatures. The demonstrated capabilities and performances of fast response speed, tunable measurement range, excellent flexibility, and reliability suggest potential uses in MEMS, robotics and biointegrated electronics.
- 25 January 2021
- Published by IOP Publishing in Nanotechnology
- Vol. 32  (15) , 155506
Bioinspired design and assembly of a multilayer cage-shaped sensor capable of multistage load bearing and collapse prevention
Flexible bioinspired mesostructures and electronic devices have recently attracted intense attention because of their widespread application in microelectromechanical systems (MEMS), reconfigurable electronics, health-monitoring systems, etc. Among various geometric constructions, 3D flexible bioinspired architectures are of particular interest, since they can provide new functions and capabilities, compared to their 2D counterparts. However, 3D electronic device systems usually undergo complicated mechanical loading in practical operation, resulting in complex deformation modes and elusive failure mechanisms. The development of mechanically robust flexible 3D electronics that can undergo extreme compression without irreversible collapse or fracture remains a challenge. Here, inspired by the multilayer mesostructure of Enhydra lutris fur, we introduce the design and assembly of multilayer cage architectures capable of multistage load bearing and collapse prevention under large out-of-plane compression. Combined in situ experiments and mechanical modeling show that the multistage mechanical responses of the developed bionic architectures can be fine-tuned by tailoring the microstructural geometries. The integration of functional layers of gold and piezoelectric polymer allows the development of a flexible multifunctional sensor that can simultaneously achieve the dynamic sensing of compressive forces and temperatures. The demonstrated capabilities and performances of fast response speed, tunable measurement range, excellent flexibility, and reliability suggest potential uses in MEMS, robotics and biointegrated electronics.
- 1 January 2021
- Published by Elsevier in Extreme Mechanics Letters
- Vol. 42
Nonlinear compressive deformations of buckled 3D ribbon mesostructures
- 1 January 2021
- Published by Elsevier in Extreme Mechanics Letters
- Vol. 42
Nonlinear compressive deformations of buckled 3D ribbon mesostructures
- Open Access
- 24 July 2020
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 6  (30) , eabb7417
Geometrically reconfigurable 3D mesostructures and electromagnetic devices through a rational bottom-up design strategy
A rational bottom-up design strategy was developed to build microelectronic devices capable of 3D geometrical reconfiguration.
- 24 July 2020
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 6  (30) , eabb7417
Open AccessGeometrically reconfigurable 3D mesostructures and electromagnetic devices through a rational bottom-up design strategy
A rational bottom-up design strategy was developed to build microelectronic devices capable of 3D geometrical reconfiguration.