Linda Zedler
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Linda Zedler has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Stephan Kupfer
Institute of Physical Chemistry Friedrich Schiller University Jena Jena Germany
5 shared publications - Sven Rau
Ulm University
4 shared publications - Benjamin Dietzek
Leibniz Institute of Photonic Technology
3 shared publications - Benjamin Dietzek-Ivanšić
Leibniz Institute of Surface Engineering
3 shared publications - Carsten Streb
Department of Chemistry Johannes Gutenberg University Mainz Mainz Germany
3 shared publications - Alexander Klaus Mengele
Ulm University
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (31) , 15025-15033
Covalently linked ferrocene–polyoxometalate dyads for light-induced radical generation
A photoactive, covalently linked ferrocene-Dawson-polyoxometalate dyad is reported and the photophysical and photoredox properties of the dyad are studied by spectroscopic and theoretical methods.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (31) , 15025-15033
Open AccessCovalently linked ferrocene–polyoxometalate dyads for light-induced radical generation
A photoactive, covalently linked ferrocene-Dawson-polyoxometalate dyad is reported and the photophysical and photoredox properties of the dyad are studied by spectroscopic and theoretical methods.
- Open Access
- 31 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Hot-Carrier Injection and Millisecond Charge Separation From a Robust Heteroleptic Iron(II) Chromophore Immobilized on TiO2
The synthesis, spectroscopic characterization, computational analysis, and photoelectrochemical behavior of a new iron-based chromophore, [(Cpy)2Fe(deeb)](PF6)2 (Fe(Cpy)2(deeb)), where Cpy is 1- methyl-3-(2-pyridyl)imidazole and deeb is 4,4’-(CO2CH2CH3)2-2,2’-bipyridine, is reported. Electrochemically reversible waves assigned to a metal-centered Eo(FeIII/II) = +0.48 and a ligand- centered E(0)(Fe2+/+) = -1.47 V vs Fc+/0 reduction were evident in cyclic voltammetry measurements. The combination of a strong -donor and a -acceptor lowered the energy of the metal-to-ligand charge- transfer (MLCT) excited state relative to the metal-centered state. Two MLCT transitions appear in the visible region at 424 nm and 580 nm. DFT calculations revealed that the lower-energy band was well formulated as Fe(II)→deeb and the higher-energy transition was charge transfer to both the deeb and Cpy ligands. Resonance Raman spectroscopy supports these findings showing enhanced deeb vibrational modes with 532 nm excitation, both deeb and Cpy modes with 473 nm excitation, and exclusively Cpy with 405 nm excitation. Ultrafast spectroscopy reveals a short-lived (~2 ps) MLCT excited state and a longer-lived (~20 ps) metal-centered state. Efficient methods to deprotect the ester groups and anchor the complex to mesoporous TiO2 (anatase) thin films in high surface coverages, Fe(Cpy)2(dcb)|TiO2 = 3 x 10-8 mol/cm2, were established. Pulsed light excitation of Fe(Cpy)2(dcb)|TiO2 resulted in rapid excited state injection (kinj > 108 s-1) and formation of a charge- separated state, FeIII(Cpy)2(dcb)|TiO2(e-), which persists on the millisecond time scale before returning cleanly to the ground state with second-order kinetics. Injection yields measured 50 ns after light excitation were found to double from [PHI] = 0.15 with green (532 nm) light to [PHI] = 0.30 with blue (457 nm) light excitation. Incident photon-to-current efficiency (% IPCE) measurements as a function of excitation wavelength in a 0.5 M LiI/I2/CH3CN electrolyte provide clear evidence for band-selective 1 ‘hot carrier’ injection from the remote Cpy-localized excited state. Collectively, the spectroscopic and photoelectrochemical data indicate that a semiconductor can intercept hot electrons even when the excited-state dipole is oriented away from the surface-anchoring ligand.
- 31 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessHot-Carrier Injection and Millisecond Charge Separation From a Robust Heteroleptic Iron(II) Chromophore Immobilized on TiO2
The synthesis, spectroscopic characterization, computational analysis, and photoelectrochemical behavior of a new iron-based chromophore, [(Cpy)2Fe(deeb)](PF6)2 (Fe(Cpy)2(deeb)), where Cpy is 1- methyl-3-(2-pyridyl)imidazole and deeb is 4,4’-(CO2CH2CH3)2-2,2’-bipyridine, is reported. Electrochemically reversible waves assigned to a metal-centered Eo(FeIII/II) = +0.48 and a ligand- centered E(0)(Fe2+/+) = -1.47 V vs Fc+/0 reduction were evident in cyclic voltammetry measurements. The combination of a strong -donor and a -acceptor lowered the energy of the metal-to-ligand charge- transfer (MLCT) excited state relative to the metal-centered state. Two MLCT transitions appear in the visible region at 424 nm and 580 nm. DFT calculations revealed that the lower-energy band was well formulated as Fe(II)→deeb and the higher-energy transition was charge transfer to both the deeb and Cpy ligands. Resonance Raman spectroscopy supports these findings showing enhanced deeb vibrational modes with 532 nm excitation, both deeb and Cpy modes with 473 nm excitation, and exclusively Cpy with 405 nm excitation. Ultrafast spectroscopy reveals a short-lived (~2 ps) MLCT excited state and a longer-lived (~20 ps) metal-centered state. Efficient methods to deprotect the ester groups and anchor the complex to mesoporous TiO2 (anatase) thin films in high surface coverages, Fe(Cpy)2(dcb)|TiO2 = 3 x 10-8 mol/cm2, were established. Pulsed light excitation of Fe(Cpy)2(dcb)|TiO2 resulted in rapid excited state injection (kinj > 108 s-1) and formation of a charge- separated state, FeIII(Cpy)2(dcb)|TiO2(e-), which persists on the millisecond time scale before returning cleanly to the ground state with second-order kinetics. Injection yields measured 50 ns after light excitation were found to double from [PHI] = 0.15 with green (532 nm) light to [PHI] = 0.30 with blue (457 nm) light excitation. Incident photon-to-current efficiency (% IPCE) measurements as a function of excitation wavelength in a 0.5 M LiI/I2/CH3CN electrolyte provide clear evidence for band-selective 1 ‘hot carrier’ injection from the remote Cpy-localized excited state. Collectively, the spectroscopic and photoelectrochemical data indicate that a semiconductor can intercept hot electrons even when the excited-state dipole is oriented away from the surface-anchoring ligand.
- Open Access
- 23 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Photoactivity of Covalently Linked Noble Metal-Free Cu(I)-Photosensitizer-Polyoxometalate Dyads
Covalent photosensitizer-polyoxometalate dyads are promising systems to combine light-harvesting and charge-storage within one molecular compound. Here, we report the synthesis and photophysical characterization of two noble-metal-free photosensitizer–polyoxometalate (PS–POM) dyads based on heteroleptic Cu(I) diimine/biphosphine complexes covalently linked to Dawson-type polyoxotungstates. The dyads were assembled via phosphonate anchoring of functionalized phenanthroline ligands, followed by Cu(I) coordination. Time-resolved spectroscopy reveals rapid visible-light-induced electron transfer from the Cu(I) photosensitizer to the POM, generating a short-lived charge-separated state with sub-nanosecond recombination. These results demonstrate the feasibility of Cu(I)-based PS–POM dyads and provide design principles for noble-metal-free photoactive assemblies.
- 23 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessPhotoactivity of Covalently Linked Noble Metal-Free Cu(I)-Photosensitizer-Polyoxometalate Dyads
Covalent photosensitizer-polyoxometalate dyads are promising systems to combine light-harvesting and charge-storage within one molecular compound. Here, we report the synthesis and photophysical characterization of two noble-metal-free photosensitizer–polyoxometalate (PS–POM) dyads based on heteroleptic Cu(I) diimine/biphosphine complexes covalently linked to Dawson-type polyoxotungstates. The dyads were assembled via phosphonate anchoring of functionalized phenanthroline ligands, followed by Cu(I) coordination. Time-resolved spectroscopy reveals rapid visible-light-induced electron transfer from the Cu(I) photosensitizer to the POM, generating a short-lived charge-separated state with sub-nanosecond recombination. These results demonstrate the feasibility of Cu(I)-based PS–POM dyads and provide design principles for noble-metal-free photoactive assemblies.
- Open Access
- 22 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Covalently linked ferrocene-polyoxometalate dyads for light-induced radical generation
The design of photoactive donor-acceptor dyads offers major opportunities for fundamental and applied studies in photochemistry and solar energy technologies. Here, we report a noble metal-free dyad obtained by covalent anchoring of a ferrocene moiety to a Dawson-type polyoxotungstate. The resulting dyad shows visible light photoinduced charge-separation and electron transfer from the ferrocene to the polyoxometalate, which can in turn be used for the photoinduced generation of radicals. Mechanistic studies using time-resolved spectroscopy and spectro-electrochemistry shed light at the underlying mechanisms of operation. The study presents a blueprint for the design of covalent photosensitizer-polyoxometalate dyads based on earth-abundant elements.
- 22 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessCovalently linked ferrocene-polyoxometalate dyads for light-induced radical generation
The design of photoactive donor-acceptor dyads offers major opportunities for fundamental and applied studies in photochemistry and solar energy technologies. Here, we report a noble metal-free dyad obtained by covalent anchoring of a ferrocene moiety to a Dawson-type polyoxotungstate. The resulting dyad shows visible light photoinduced charge-separation and electron transfer from the ferrocene to the polyoxometalate, which can in turn be used for the photoinduced generation of radicals. Mechanistic studies using time-resolved spectroscopy and spectro-electrochemistry shed light at the underlying mechanisms of operation. The study presents a blueprint for the design of covalent photosensitizer-polyoxometalate dyads based on earth-abundant elements.
- Open Access
- 19 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
A Photocatalytically Active Rotaxane Mimicking Photosystem I
Highly efficient and environmentally friendly catalysis as observed in nature remains a pivotal yet unresolved challenge with broad scientific and societal relevance. In synthetic settings, the prevention of catalyst deactivation from chemical changes to its molecular structure during active operation is the primary concern and remains elusive. Inspired by membrane and protein integration of the natural photosynthetic apparatus of green plants ensuring structural integrity of key components, we report a photocatalytically active rotaxane mimicking photosystem I. Strategically burying sensitive alkyne-units of the metal-connecting bridging ligand in a macrocycle cavity, i.e. in cucurbit[7]uril, the heterodinuclear rotaxane photocatalyst preserves both, structural integrity and activity of its components yielding superior, long-term photocatalytic activity under enzyme-like H-bond-driven substrate preorganization at the catalytic center. These results underscore the pivotal function of rationally engineered interplay between supramolecular assemblies in catalysis, thereby inaugurating novel catalytic paradigms for more sophisticated and sustainable supramolecular methodologies with direct applications in artificial photosynthesis and light-driven water splitting.
- 19 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessA Photocatalytically Active Rotaxane Mimicking Photosystem I
Highly efficient and environmentally friendly catalysis as observed in nature remains a pivotal yet unresolved challenge with broad scientific and societal relevance. In synthetic settings, the prevention of catalyst deactivation from chemical changes to its molecular structure during active operation is the primary concern and remains elusive. Inspired by membrane and protein integration of the natural photosynthetic apparatus of green plants ensuring structural integrity of key components, we report a photocatalytically active rotaxane mimicking photosystem I. Strategically burying sensitive alkyne-units of the metal-connecting bridging ligand in a macrocycle cavity, i.e. in cucurbit[7]uril, the heterodinuclear rotaxane photocatalyst preserves both, structural integrity and activity of its components yielding superior, long-term photocatalytic activity under enzyme-like H-bond-driven substrate preorganization at the catalytic center. These results underscore the pivotal function of rationally engineered interplay between supramolecular assemblies in catalysis, thereby inaugurating novel catalytic paradigms for more sophisticated and sustainable supramolecular methodologies with direct applications in artificial photosynthesis and light-driven water splitting.
- Open Access
- 18 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Immobilizing photocatalysts in polyampholytic graft copolymers enables prolonged catalyst lifetime and improved repair capability
The incorporation of the natural photosynthetic apparatus into a (soft matter) environment highly restricts the number of degradation possibilities and furthermore enables targeted repair of key molecular components. Intrigued by this design-principle of the natural blueprint, we postulate that balancing the interplay between polymeric matrices and photocatalytically active centers prolongs and sustains photocatalytic activity as well as repair-capability in molecular artificial photosynthesis. There are few systems where active repair has been demonstrated, and one prominent example is the Ru(tpphz)PtI2 hydrogen-evolving photocatalyst, where hydrogenation of the pyrazine ring in the tpphz bridging ligand has been shown to lead to an end of photocatalytic activity. Subsequent in-situ repair by persulfate enabled catalyst reactivation, but so far at the cost of decreasing catalytic activity over several repair cycles. We now show that tailored polyampholytic graft copolymers allow to electrostatically immobilize the photocatalyst in a unimolecular soft matter matrix, can prolong (photo)catalytic activity, and facilitate active repair without significant loss of activity over several cycles. We attribute this to a decreased propensity for hydrogenation of the pyrazine ring and, with that, slower degradation of the bridge and improved long term HER activity, as evidenced by a holistic spectroscopic characterization of molecular and electronic structure of the photoredox catalyst. We therefore regard this as a novel blueprint for a synergistic molecule-in-matrix combination for sustainable light-driven catalysis.
- 18 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessImmobilizing photocatalysts in polyampholytic graft copolymers enables prolonged catalyst lifetime and improved repair capability
The incorporation of the natural photosynthetic apparatus into a (soft matter) environment highly restricts the number of degradation possibilities and furthermore enables targeted repair of key molecular components. Intrigued by this design-principle of the natural blueprint, we postulate that balancing the interplay between polymeric matrices and photocatalytically active centers prolongs and sustains photocatalytic activity as well as repair-capability in molecular artificial photosynthesis. There are few systems where active repair has been demonstrated, and one prominent example is the Ru(tpphz)PtI2 hydrogen-evolving photocatalyst, where hydrogenation of the pyrazine ring in the tpphz bridging ligand has been shown to lead to an end of photocatalytic activity. Subsequent in-situ repair by persulfate enabled catalyst reactivation, but so far at the cost of decreasing catalytic activity over several repair cycles. We now show that tailored polyampholytic graft copolymers allow to electrostatically immobilize the photocatalyst in a unimolecular soft matter matrix, can prolong (photo)catalytic activity, and facilitate active repair without significant loss of activity over several cycles. We attribute this to a decreased propensity for hydrogenation of the pyrazine ring and, with that, slower degradation of the bridge and improved long term HER activity, as evidenced by a holistic spectroscopic characterization of molecular and electronic structure of the photoredox catalyst. We therefore regard this as a novel blueprint for a synergistic molecule-in-matrix combination for sustainable light-driven catalysis.
- Open Access
- 13 December 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Entangled excited state branching processes in a Ru(II)-based push-pull triad
Compared with triplet metal-to-ligand charge transfer (3MLCT) states, charge-separated (3CS) excited states involving organic moieties, such as triplet intra-ligand or ligand-to-ligand charge transfer (3ILCT and 3LLCT) states, tend to possess longer-lived excited states due to the weak spin-orbit coupling with the closed-shell ground state (GS). Thus, the combination of both inorganic and organic chromophores enables the isolation of triplet excited states onto the organic chromophore. Herein, we aim to elucidate the entangled excited-state relaxation processes in a Ru(II)-terpyridyl push-pull triad (RuCl) in a joint spectroscopic-theoretical approach combining steady-state and time-resolved spectroscopy as well as quantum chemical simulations and dissipative quantum dynamics. The kinetics of the underlying electron transfer (ET) processes involving the low-lying 3MLCT, 3ILCT and 3LLCT excited states were investigated experimentally and computationally within a semi-classical Marcus picture, which allowed us to evaluate the ET processes between along the 3MLCT-3ILCT and the 3MLCT-3LLCT channels. Finally, dissipative quantum dynamical simulations – capable of describing incomplete ET processes involving all three states of interest – enabled us to unravel the competitive excited state relaxation channels at the short timescale vs. at the long timescale among the strongly coupled 3MLCT-3ILCT states as well as the weakly coupled 3MLCT/3ILCT-3LLCT states.
- 13 December 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessEntangled excited state branching processes in a Ru(II)-based push-pull triad
Compared with triplet metal-to-ligand charge transfer (3MLCT) states, charge-separated (3CS) excited states involving organic moieties, such as triplet intra-ligand or ligand-to-ligand charge transfer (3ILCT and 3LLCT) states, tend to possess longer-lived excited states due to the weak spin-orbit coupling with the closed-shell ground state (GS). Thus, the combination of both inorganic and organic chromophores enables the isolation of triplet excited states onto the organic chromophore. Herein, we aim to elucidate the entangled excited-state relaxation processes in a Ru(II)-terpyridyl push-pull triad (RuCl) in a joint spectroscopic-theoretical approach combining steady-state and time-resolved spectroscopy as well as quantum chemical simulations and dissipative quantum dynamics. The kinetics of the underlying electron transfer (ET) processes involving the low-lying 3MLCT, 3ILCT and 3LLCT excited states were investigated experimentally and computationally within a semi-classical Marcus picture, which allowed us to evaluate the ET processes between along the 3MLCT-3ILCT and the 3MLCT-3LLCT channels. Finally, dissipative quantum dynamical simulations – capable of describing incomplete ET processes involving all three states of interest – enabled us to unravel the competitive excited state relaxation channels at the short timescale vs. at the long timescale among the strongly coupled 3MLCT-3ILCT states as well as the weakly coupled 3MLCT/3ILCT-3LLCT states.
- Open Access
Resonance Raman Spectro-Electrochemistry to Illuminate Photo-Induced Molecular Reaction Pathways
Electron transfer reactions play a key role for artificial solar energy conversion, however, the underlying reaction mechanisms and the interplay with the molecular structure are still poorly understood due to the complexity of the reaction pathways and ultrafast timescales. In order to investigate such light-induced reaction pathways, a new spectroscopic tool has been applied, which combines UV-vis and resonance Raman spectroscopy at multiple excitation wavelengths with electrochemistry in a thin-layer electrochemical cell to study [RuII(tbtpy)2]2+ (tbtpy = tri-tert-butyl-2,2′:6′,2′′-terpyridine) as a model compound for the photo-activated electron donor in structurally related molecular and supramolecular assemblies. The new spectroscopic method substantiates previous suggestions regarding the reduction mechanism of this complex by localizing photo-electrons and identifying structural changes of metastable intermediates along the reaction cascade. This has been realized by monitoring selective enhancement of Raman-active vibrations associated with structural changes upon electronic absorption when tuning the excitation wavelength into new UV-vis absorption bands of intermediate structures. Additional interpretation of shifts in Raman band positions upon reduction with the help of quantum chemical calculations provides a consistent picture of the sequential reduction of the individual terpyridine ligands, i.e., the first reduction results in the monocation [(tbtpy)Ru(tbtpy•)]+, while the second reduction generates [(tbtpy•)Ru(tbtpy•)]0 of triplet multiplicity. Therefore, the combination of this versatile spectro-electrochemical tool allows us to deepen the fundamental understanding of light-induced charge transfer processes in more relevant and complex systems.
Open AccessResonance Raman Spectro-Electrochemistry to Illuminate Photo-Induced Molecular Reaction Pathways
Electron transfer reactions play a key role for artificial solar energy conversion, however, the underlying reaction mechanisms and the interplay with the molecular structure are still poorly understood due to the complexity of the reaction pathways and ultrafast timescales. In order to investigate such light-induced reaction pathways, a new spectroscopic tool has been applied, which combines UV-vis and resonance Raman spectroscopy at multiple excitation wavelengths with electrochemistry in a thin-layer electrochemical cell to study [RuII(tbtpy)2]2+ (tbtpy = tri-tert-butyl-2,2′:6′,2′′-terpyridine) as a model compound for the photo-activated electron donor in structurally related molecular and supramolecular assemblies. The new spectroscopic method substantiates previous suggestions regarding the reduction mechanism of this complex by localizing photo-electrons and identifying structural changes of metastable intermediates along the reaction cascade. This has been realized by monitoring selective enhancement of Raman-active vibrations associated with structural changes upon electronic absorption when tuning the excitation wavelength into new UV-vis absorption bands of intermediate structures. Additional interpretation of shifts in Raman band positions upon reduction with the help of quantum chemical calculations provides a consistent picture of the sequential reduction of the individual terpyridine ligands, i.e., the first reduction results in the monocation [(tbtpy)Ru(tbtpy•)]+, while the second reduction generates [(tbtpy•)Ru(tbtpy•)]0 of triplet multiplicity. Therefore, the combination of this versatile spectro-electrochemical tool allows us to deepen the fundamental understanding of light-induced charge transfer processes in more relevant and complex systems.