GAGiorgio Amati

Giorgio Amati

*This is an algorithmically generated author record based on publicly available information.

Giorgio Amati has a total of 119 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Limited impact of the 2025 Kamchatka tsunami explained by the complex seismic rupture

    by Stefano Lorito, Fabrizio Romano, Hafize B. Bayraktar, Nikos Kalligeris, Juan F. Rodríguez Gálvez, Alessio Piccolo, Simone Atzori, Alessio Piatanesi, Valeria Cascone, Manuela Volpe, et al.

    The great 29 th of July 2025 megathrust earthquake of magnitude 8.8, which occurred near the Kamchatka Peninsula, Russia, generated a local tsunami comparable to that of its larger 1952 predecessor, which, in contrast, caused a larger tsunami along the far-field Pacific shorelines. The 2025 tsunami was also smaller than anticipated by the life-saving tsunami warning issued for the far-field Pacific shorelines. By jointly inverting SWOT and DART tsunami data, InSAR and GNSS data, here we show that the 2025 earthquake rupture occurred within or adjacent to the 1952 source area, with an uncertain degree of overlap. We also show that a smaller tsunami potential energy due to earthquake magnitude and relatively deep slip explains the moderate far-field impact. Conversely, some shallow displacement that reaches the trench explains the enhanced local runup, comparable to the 1952 runup, despite the smaller magnitude of the 2025 earthquake. Our findings are supported by comparisons with previous tsunamis (2010 Maule, Chile, and 2005 Nias, Indonesia).

  • Open Access

    Erratum: GPU-accelerated simulations of turbulence: Review of current applications and future perspectives [Phys. Rev. Fluids 11 , 034905 (2026)]

    by A. Roccon, G. Amati, L. Brandt, D. Calhoun, P. Costa, W. Lu, S. Pirozzoli, D. Richter, M. Umair, D. You, et al.

  • Top Cited Papers
    Open Access

    GPU-accelerated simulations of turbulence: Review of current applications and future perspectives

    by A. Roccon, G. Amati, L. Brandt, D. Calhoun, P. Costa, W. Lu, S. Pirozzoli, D. Richter, M. Umair, D. You, et al.

    The growing availability of GPU-accelerated open-source solvers has boosted the capability of tackling complex single-phase and multiphase turbulent flows by means of direct and large-eddy simulations. GPU-accelerated solvers can leverage the heterogeneous computing architectures that are available in leading high-performance computing centers worldwide, taking advantage of the higher throughput and greater energy efficiency offered by GPUs as compared to CPUs. However, porting CPU-based numerical solvers to GPUs entails many outstanding challenges, such as parallelism exposure, inter-GPU communication, memory allocation constraints, and shared memory limitations. To overcome these challenges, GPU-friendly algorithms, performance portability strategies, and careful selection of computational paradigms and programming languages must be developed. Besides, adaptive mesh refinement and data compression may be integrated to mitigate I-O bottlenecks and enable simulations of more complex geometries on top of the existing requirements imposed by incompressible flows. When compressibility effects become significant, further considerations related to the adoption of high-performance preconditioners and multigrid solvers become crucial for tackling large, sparse linear systems and extending simulations to high-Mach flows. Finally, reduced-precision arithmetic can further enhance performance, energy efficiency, and scalability. In this work, we survey current applications of GPU-accelerated solvers in the broad area of fluid mechanics and turbulence simulations and discuss the main challenges and bottlenecks associated with code porting and optimization. We then conclude our analysis with an outlook on future perspectives for enabling efficient GPU-based exascale computing of turbulence.


  • Experience on Clock Rate Adjustment for Energy-Efficient GPU-Accelerated Real-World Codes

    by Giorgio Amati, Matteo Turisini, Andrea Monterubbiano, Mattia Paladino, Elisabetta Boella, Daniele Gregori, Danilo Croce


  • Open Access

    Energy efficiency: a Lattice Boltzmann study

    by Matteo Turisini, Giorgio Amati, Andrea Acquaviva

    The energy consumption and the compute performance of a fluid dynamic code have been investigated varying parallelization approach, arithmetic precision and clock speed. The code is based on a Lattice Boltzmann approximation, is written in Fortran and was executed on high-end GPUs of Leonardo Booster supercomputer. Tests were conducted on single server nodes (up to 4 GPUs in parallel). Performance metrics like the number of operations per second and energy consumption are reported, to quantify how smart coding approach and system adjustment can contribute to reduction of energy footprint while keeping the scientific throughput almost unaltered or with acceptable level of degradation. Results indicate that this application can be executed with 20% of energy saving and reduced thermal stress, at the cost of 5% more computing time. The paper presents preliminary conclusions, as it is a first step of a larger study dedicated to energy efficiency at scale.


  • Adapting to the Abyss: Passive Ventilation in the Deep-Sea Glass Sponge Euplectella aspergillum

    by Giacomo Falcucci, Giorgio Amati, Gino Bella, Andrea Luigi Facci, Vesselin K. Krastev, Giovanni Polverino, Sauro Succi, Maurizio Porfiri

    We analyze the flow physics inside the body cavity and downstream the deep-sea glass sponge Euplectella aspergillum. We provide evidence that the helical skeletal motifs of the sponge give rise to a rich fluid dynamic field, allowing the organism to scavenge flow from the bottom of the sea and promoting a spontaneous, organized vertical flow within its body cavity toward the osculum. Our analysis points at a functional adaptation of the organism, which can passively divert flow through the osculum in unfavorable, low ambient currents, with no need for active pumping, with potential repercussions in functional ecology, as well as the design of chemical reactors, air-treatment units, and civil and aeronaval structures.


  • Open Access

    High-order thread-safe lattice Boltzmann model for high performance computing turbulent flow simulations

    by Andrea Montessori, Michele La Rocca, Giorgio Amati, Marco Lauricella, Adriano Tiribocchi, Sauro Succi

    We present a highly optimized thread-safe lattice Boltzmann model in which the non-equilibrium part of the distribution function is locally reconstructed via recursivity of Hermite polynomials. Such a procedure allows the explicit incorporation of non-equilibrium moments of the distribution up to the order supported by the lattice. Thus, the proposed approach increases accuracy and stability at low viscosities without compromising performance and amenability to parallelization with respect to standard lattice Boltzmann models. The high-order thread-safe lattice Boltzmann is tested on two types of turbulent flows, namely, the turbulent channel flow at Reτ=180 and the axisymmetric turbulent jet at Re = 7000; it delivers results in excellent agreement with reference data [direct numerical simulations (DNS), theory, and experiments] and (a) achieves peak performance [∼5×1012 floating point operations (FLOP) per second and an arithmetic intensity of ∼7 FLOP/byte on a single graphic processing unit] by significantly reducing the memory footprint, (b) retains the algorithmic simplicity of standard lattice Boltzmann computing, and (c) allows to perform stable simulations at vanishingly low viscosities. Our findings open attractive prospects for high-performance simulations of realistic turbulent flows on GPU-based architectures. Such expectations are confirmed by excellent agreement among lattice Boltzmann, experimental, and DNS reference data.


  • Open Access

    On floating point precision in computational fluid dynamics using OpenFOAM

    by F. Brogi, S. Bnà, G. Boga, G. Amati, T. Esposti Ongaro, M. Cerminara


  • Open Access

    Enhancing the Power Performance of Latent Heat Thermal Energy Storage Systems: The Adoption of Passive, Fractal Supports

    by Giorgio Amati, Sauro Succi, Giacomo Falcucci

    We employ a three-phase thermal lattice Boltzmann model (LBM) to investigate the power performance of latent heat thermal energy storage (LHTES) systems based on the exploitation of phase change materials (PCMs). Different passive thermal supports are considered to increase the melting rate, including innovative, fractal, branch-like structures. Our simulations reveal that the adoption of fractal, branch-like metal supports consistently outperforms other configurations in terms of PCM melting rates. These results open the path towards novel strategies to enhance the power performance of PCM-based TES systems, offering potential benefits for energy storage applications.


  • Open Access

    Lightweight lattice Boltzmann

    by Adriano Tiribocchi, Andrea Montessori, Giorgio Amati, Massimo Bernaschi, Fabio Bonaccorso, Sergio Orlandini, Sauro Succi, Marco Lauricella

    A regularized version of the lattice Boltzmann method for efficient simulation of soft materials is introduced. Unlike standard approaches, this method reconstructs the distribution functions from available hydrodynamic variables (density, momentum, and pressure tensor) without storing the full set of discrete populations. This scheme shows significantly lower memory requirements and data access costs. A series of benchmark tests of relevance to soft matter, such as collisions of fluid droplets, is discussed to validate the method. The results can be of particular interest for high-performance simulations of soft matter systems on future exascale computers.