SXSheng-Wen Xie

Sheng-Wen Xie

*This is an algorithmically generated author record based on publicly available information.

Sheng-Wen Xie has a total of 22 co-authors. Here are the top co-authors by number of shared publications:

  • Chengao Yang

    Institute of Semiconductors

    1 shared publication
  • Chuanqi Li

    Collighter Co., Ltd 1 , 5th Building, 1st Floor, No. 8 Jiachuang 2nd Road, Beijing Economic-Technological Development Area (Tongzhou District), Beijing 101100

    1 shared publication
  • Fu-Hui Shao

    State Key Laboratory for Superlattices and Microstructures, Institute of Semiconductors, Chinese Academy of Sciences 1 , Beijing 100083, China

    1 shared publication
  • Hailing Tu

    State Key Laboratory of Advanced Materials for Smart Sensing, China General Research Institute for Nonferrous Metals 5 , Beijing 100088

    1 shared publication
  • Hongbin Zhao

    State Key Laboratory of Advanced Materials for Smart Sensing, China General Research Institute for Nonferrous Metals 5 , Beijing 100088

    1 shared publication
  • Jiaming Li

    Collighter Co., Ltd 1 , 5th Building, 1st Floor, No. 8 Jiachuang 2nd Road, Beijing Economic-Technological Development Area (Tongzhou District), Beijing 101100

    1 shared publication

Latest Publications

  • Top Cited Papers

    Demonstration of long-wavelength infrared photodetector based on long minority carrier lifetime InAs/In0.5Ga0.5As0.5Sb0.5 type-II superlattices

    by Peng Du, Xuan Fang, Zhebo Bao, Liuqin Zeng, Jiaming Li, Shengyang Zuo, Chuanqi Li, Tengzhou Zhang, Weijie Li, Lili Xie, et al.

    This work demonstrates a significant advancement in the minority carrier lifetime of InAs/In0.5Ga0.5As0.5Sb0.5 type-II superlattices (T2SLs) designed for long-wavelength infrared (LWIR) detection. The superlattices were grown using the fractional monolayer alloy epitaxy method on GaSb substrates and subsequently integrated into nBn device architectures to suppress dark current. High crystalline quality and strong photoluminescence efficiency were confirmed. Furthermore, time-resolved microwave photoconductance decay measurements revealed a record-long minority carrier lifetime of 20.31 μs at a photoluminescence peak of 9.4 μm and a temperature of 77 K. This value surpasses those of other common LWIR T2SL materials and reached the Auger-limited lifetime for mercury cadmium telluride. The fabricated 1024 × 6 format nBn photodetectors, incorporating a 2.5 μm-thick absorber, exhibited a low dark-current density of 4.45 × 10−6 A/cm2 at 77 K. A quantum efficiency of 37.7% was achieved at 8 μm. Additionally, the detector demonstrated a noise-equivalent temperature difference below 25 mK up to 95 K, using a 7.7–10 μm bandpass filter and f/2 optics under a 300 K background. These results underscore the strong potential of InAs/In0.5Ga0.5As0.5Sb0.5 superlattices for next-generation LWIR imaging applications.


  • High-power, high-spectral-purity GaSb-based laterally coupled distributed feedback lasers with metal gratings emitting at 2 μ m

    by Cheng-Ao Yang, Sheng-Wen Xie, Yi Zhang, Jin-Ming Shang, Shu-Shan Huang, Ye Yuan, Fu-Hui Shao, Yu Zhang, Ying-Qiang Xu, Zhi-Chuan Niu

    We report on the fabrication of high-power, high-spectral-purity GaSb-based laterally coupled distributed feedback (LC-DFB) lasers emitting at 2 μm. Second-order Chromium-Bragg-gratings are fabricated alongside the ridge waveguide by lift off. Due to the introduction of gain coupling, the lasers exhibit a stable single mode operation [side-mode suppression ratio (SMSR) >40 dB] from 10 °C to 50 °C and the maximum SMSR is as high as 53 dB. At a heat-sink temperature of 10 °C, the lasers emit more than 40 mW continuous-wave in a single longitudinal mode. A high external quantum efficiency of 48% is obtained, resulting in a notable increase in power conversion efficiency peaking at 13%. The lasers achieve a comparable output power with that of the index-coupled LC-DFB lasers, while maintaining a better single mode performance. Thus, we prove the feasibility of the metal-grating LC-DFB structure to achieve high-power, frequency-stable semiconductor lasers through a simpler and much more convenient way.