JKJihwan Kim

Jihwan Kim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jihwan Kim has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Beyond 200-Gb/s PAM4 ADC and DAC-Based Transceiver for Wireline and Linear Optics Applications

    by Ahmad Khairi, Amir Laufer, Ilia Radashkevich, Yoel Krupnik, Jihwan Kim, Tali Warshavsky Grafi, Ajay Balankutty, Yaniv Sabag, Yoav Segal, Udi Virobnik, et al.

    System considerations, circuit architecture, and design implementation of wireline and linear optics transceivers capable of supporting data-rates beyond 200Gb/s are presented. We showcase the silicon results of a transceiver designed in the advanced 3nm CMOS process, which supports long-reach channels with up to 40dB of loss at Nyquist. These results demonstrate the technology’s benefits of doubling the data rate of transceivers while achieving efficiency gains in power consumption and silicon area. The paper highlights several key circuits architecture such as Hybrid CTLE, inductive peaking clock routing and one stage TX driver based on grounded switches. The proof-of-concept demonstration of 224 Gb/s with linear optics opens the avenue for power-efficient, low-latency future optical communication. This is crucial for high performance computing (HPC) networking as well as emerging applications in high end FPGA.


  • A 0.92-pJ/b PAM-4 and 0.61-pJ/b PAM-6 224-Gb/s DAC-Based Transmitter in 3-nm FinFET

    by Marco Cusmai, Noam Familia, Elad Kuperberg, Mohammad Nashash, Dovid Gottesman, Zvi Marcus, Yeshayahu Horwitz, Sagi Zalcman, Jihwan Kim, Sandipan Kundu, et al.

    This article presents the architecture, circuit design, and measurement results of a 224-Gb/s transmitter (TX) based on a 7-bit digital-to-analog converter (DAC) driver with nine-tap digital feed-forward equalizer (FFE) fabricated in the 3-nm FinFET technology. The TX uses quarter-rate 28-GHz clocking for a combined single-stage, current-mode 4:1 multiplexer (MUX), and output driver, with a replica driver for phase adaptations. An LC -phase-locked loop (PLL) with a tuning range of 21.2–30.0 GHz allows to operate the TX at both four-level (PAM-4) and six-level (PAM-6) pulse amplitude modulation. The TX achieves 1-Vppd swing and analog energy efficiency of 0.92 pJ/b in PAM-4 and 0.61 pJ/b in PAM-6 while showing 36.0-dB SNDR, 55-mUI J3u $_{03}$ , and 62-fs $_{\text{rms}}$ jitter. To the best of the authors’ knowledge, the design achieved the highest energy efficiency to date at 224 Gb/s while complying with the IEEE 802.3ck Ethernet specifications scaled to 112 Gbaud.


  • Top Cited Papers

    A 224-Gb/s DAC-Based PAM-4 Quarter-Rate Transmitter With 8-Tap FFE in 10-nm FinFET

    by Jihwan Kim, Sandipan Kundu, Ajay Balankutty, Matthew Beach, Bong Chan Kim, Stephen T. Kim, Yutao Liu, Savyasaachi Keshava Murthy, Priya Wali, Kai Yu, et al.

    This article presents analysis, design details, and measurement result of a 224-Gb/s four-level pulse amplitude modulation (PAM-4) transmitter (TX) consisting of a 7-bit voltage digital-to-analog converter (DAC) driver, digital 8-tap feed-forward equalizer (FFE), and a 28-GHz inductively peaked clock distribution network. The TX DAC uses quarter-rate clocking with a 4:1 pulse-based data serialization architecture. Design techniques for generating and distributing low-jitter CMOS clocks up to 29 GHz, timing closure in the serializer, 112-Gbaud 4:1 data MUX using 1-UI pulse generator, and bandwidth/return loss/group delay optimized output pad network using a 9th-order LC filter are described. Fabricated in the Intel 10-nm FinFET process technology, the TX demonstrates random jitter (RJ) of 65 fs $_{{rms}}$ with nominal output swing of 1.0 $V_{{ppd}}$ at 224 Gb/s achieving 1.88-pJ/b energy efficiency including an on-die LC phase-locked loop (PLL). To the best of authors' knowledge, this TX achieved the highest data rate with the lowest RJ for CMOS SerDes TXs reported to date.


  • A 112 Gb/s PAM-4 56 Gb/s NRZ Reconfigurable Transmitter With Three-Tap FFE in 10-nm FinFET

    by Jihwan Kim, Ajay Balankutty, Rajeev K. Dokania, Amr Elshazly, Hyung Seok Kim, Sandipan Kundu, Dan Shi, Skyler Weaver, Kai Yu, Frank O'MAhony

    This paper presents a reconfigurable 56 GS/s transmitter (TX) that operates up to 112 Gb/s with four-level pulse-amplitude modulation (PAM-4) and at 56 Gb/s with non-return-to-zero (NRZ) modulation scheme. Fabricated in the 10-nm FinFET technology, the TX incorporates a four-way interleaved quarter-rate architecture with a three-tap feed-forward equalizer (FFE). Key features of the TX include a 1-UI pulse-generator-based 4:1 serializer combined with a current-mode logic (CML) driver, low-power data-serializing paths, an output pad-network using a multi-segment π-coil for bandwidth co-optimization together with ESD diodes, sub-80-fs resolution duty-cycle detector/corrector (DCD/DCC) and quadrature-error detector/corrector (QED/QEC) circuits, and a hybrid LC-phase-locked loop (PLL) with quadrature clock distribution circuits. The TX operating at 112 Gb/s in PAM-4 modulation consumes 232 mW from 1- and 1.5-V supplies, achieving an 2.07 pJ/b energy efficiency. The TX front end occupies an area of 0.0302 mm².