Marius Rüetschi
Research Subjects
Marius Rüetschi has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Lars T. Waser
Land Change Science, Swiss Federal Institute for Forest, Snow and Landscape Research WSL, 8903 Birmensdorf, Switzerland
2 shared publications - Alexander Damm
University of Zürich
1 shared publication - Christian Ginzler
Swiss Federal Institute for Forest, Snow and Landscape Research WSL, Birmensdorf, Switzerland
1 shared publication - David Hanimann
Swiss Federal Institute for Forest, Snow and Landscape Research (WSL), CH-8903 Birmensdorf, Switzerland
1 shared publication - David Small
Remote Sensing Laboratories, Department of Geography, University of Zurich, Zurich, Switzerland
1 shared publication - Dirk Nikolaus Karger
Swiss Federal Institute for Forest, Snow and Landscape Research WSL, Birmensdorf, Switzerland
1 shared publication
Latest Publications
- Open Access
- 18 June 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (12) , 2094
Assessing Intraspecific Variation of Tree Species Based on Sentinel-2 Vegetation Indices Across Space and Time
Forest ecosystems are vital for biodiversity, climate regulation, and ecosystem services. Their resilience depends not only on species diversity but also on intraspecific variation—the genetic and phenotypic differences within species—which underpins adaptive capacity to environmental change. However, large-scale, continuous monitoring of intraspecific variation remains challenging. Here, we present a remote sensing approach using Sentinel-2 time series of five vegetation indices as proxies for pigment content, canopy structure, and water content to detect intraspecific variation in seven tree species across a broad environmental gradient in Switzerland. Using pure-species plot data from the Swiss National Forest Inventory, we decomposed variation into spatial, temporal, and spatiotemporal components. We found that spatial variation dominated in evergreen species (48–86%), while temporal variation was more pronounced in deciduous species (56–82%), reflecting their stronger seasonality. These findings demonstrate that species-specific Sentinel-2 time series can effectively track intraspecific variation, providing a scalable method for forest monitoring. This approach opens new pathways for studying forest adaptation, informing management strategies, and guiding species selection for conservation under changing climate conditions.
- 18 June 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (12) , 2094
Open AccessAssessing Intraspecific Variation of Tree Species Based on Sentinel-2 Vegetation Indices Across Space and Time
Forest ecosystems are vital for biodiversity, climate regulation, and ecosystem services. Their resilience depends not only on species diversity but also on intraspecific variation—the genetic and phenotypic differences within species—which underpins adaptive capacity to environmental change. However, large-scale, continuous monitoring of intraspecific variation remains challenging. Here, we present a remote sensing approach using Sentinel-2 time series of five vegetation indices as proxies for pigment content, canopy structure, and water content to detect intraspecific variation in seven tree species across a broad environmental gradient in Switzerland. Using pure-species plot data from the Swiss National Forest Inventory, we decomposed variation into spatial, temporal, and spatiotemporal components. We found that spatial variation dominated in evergreen species (48–86%), while temporal variation was more pronounced in deciduous species (56–82%), reflecting their stronger seasonality. These findings demonstrate that species-specific Sentinel-2 time series can effectively track intraspecific variation, providing a scalable method for forest monitoring. This approach opens new pathways for studying forest adaptation, informing management strategies, and guiding species selection for conservation under changing climate conditions.
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
Automated detection of countrywide forest cover and forest gaps using alpha shape
This work aims to develop a highly automated workflow for generating a forest cover map and detecting forest gaps at the countrywide level (i.e. Switzerland) using the alpha shape approach (Edelsbrunner et al. 1983).Forest provides society with several functions. In Switzerland e.g., more than 50% of the forests have a protection function and mitigate or prevent the impact of a natural hazard. The accurate detection of forest gaps (openings in the forest canopy) is crucial for properly managing and planning protection forests. In addition, knowledge of the distribution of forest gaps is a useful indicator to assess forest structure and biodiversity. Although the required information is collected at the plot level within the framework of the National Forest Inventory (NFI), remote sensing allows us to derive spatially explicit and accurate products at the pixel level for the entire country.The countrywide available 1 m spatial resolution Vegetation Height Model (VHM) (Ginzler & Hobi, 2015) serves as a basis to extract forest cover and forest gaps. The VHM was generated from image-based point clouds acquired between 2013 and 2021 for the full coverage of Switzerland. In the first step, a forest cover map was derived using the VHM. In a second step, a dense forest cover map was generated and forest gaps were delineated taking into account the Swiss NFI forest definition criteria comprising minimum tree height and width, crown coverage, and land use. In summary, the overall workflow consists of extracting the tree top points from the VHM (FINT software). Erroneous tree tops were removed using the probability forest mask derived from Sentinel-1/-2 data (Rüetschi et al. 2021). We then derived forest area and non-forest area polygons from the filtered tree top points using alpha shape (lasboundary, LAStools from rapidlasso) that computes a boundary polygon that encloses the points.A dense forest cover map is calculated using a moving window approach and forest areas greater than 60% are extracted. The forest gaps detection within the dense forest cover map follows a similar approach adopted for the forest cover map, but the alpha shape polygons are extracted from the VHM which is converted to the las format. The entire workflow is developed in Python.Accuracy assessments of forest cover boundary and forest gaps based on terrestrial and stereo image-interpreted NFI plots are promising and reveal an overall agreement of more than 95% over the entire country.ReferenceEdelsbrunner, H., Kirkpatrick, D.G., Seidel, R., 1983. On the shape of a set of points in the plane. IEEE Transactions on Information Theory, 29(4), pp.551-559.Ginzler, C. and Hobi, M.L., 2015. Countrywide stereo-image matching for updating digital surface models in the framework of the Swiss National Forest Inventory. Remote Sensing, 7(4), pp.4343-4370.Rüetschi, M., Weber, D., Koch, T.L., Waser, L.T., Small, D. and Ginzler, C., 2021. Countrywide mapping of shrub forest using multi-sensor data and bias correction techniques. International Journal of Applied Earth Observation and Geoinformation, 105, 102613.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessAutomated detection of countrywide forest cover and forest gaps using alpha shape
This work aims to develop a highly automated workflow for generating a forest cover map and detecting forest gaps at the countrywide level (i.e. Switzerland) using the alpha shape approach (Edelsbrunner et al. 1983).Forest provides society with several functions. In Switzerland e.g., more than 50% of the forests have a protection function and mitigate or prevent the impact of a natural hazard. The accurate detection of forest gaps (openings in the forest canopy) is crucial for properly managing and planning protection forests. In addition, knowledge of the distribution of forest gaps is a useful indicator to assess forest structure and biodiversity. Although the required information is collected at the plot level within the framework of the National Forest Inventory (NFI), remote sensing allows us to derive spatially explicit and accurate products at the pixel level for the entire country.The countrywide available 1 m spatial resolution Vegetation Height Model (VHM) (Ginzler & Hobi, 2015) serves as a basis to extract forest cover and forest gaps. The VHM was generated from image-based point clouds acquired between 2013 and 2021 for the full coverage of Switzerland. In the first step, a forest cover map was derived using the VHM. In a second step, a dense forest cover map was generated and forest gaps were delineated taking into account the Swiss NFI forest definition criteria comprising minimum tree height and width, crown coverage, and land use. In summary, the overall workflow consists of extracting the tree top points from the VHM (FINT software). Erroneous tree tops were removed using the probability forest mask derived from Sentinel-1/-2 data (Rüetschi et al. 2021). We then derived forest area and non-forest area polygons from the filtered tree top points using alpha shape (lasboundary, LAStools from rapidlasso) that computes a boundary polygon that encloses the points.A dense forest cover map is calculated using a moving window approach and forest areas greater than 60% are extracted. The forest gaps detection within the dense forest cover map follows a similar approach adopted for the forest cover map, but the alpha shape polygons are extracted from the VHM which is converted to the las format. The entire workflow is developed in Python.Accuracy assessments of forest cover boundary and forest gaps based on terrestrial and stereo image-interpreted NFI plots are promising and reveal an overall agreement of more than 95% over the entire country.ReferenceEdelsbrunner, H., Kirkpatrick, D.G., Seidel, R., 1983. On the shape of a set of points in the plane. IEEE Transactions on Information Theory, 29(4), pp.551-559.Ginzler, C. and Hobi, M.L., 2015. Countrywide stereo-image matching for updating digital surface models in the framework of the Swiss National Forest Inventory. Remote Sensing, 7(4), pp.4343-4370.Rüetschi, M., Weber, D., Koch, T.L., Waser, L.T., Small, D. and Ginzler, C., 2021. Countrywide mapping of shrub forest using multi-sensor data and bias correction techniques. International Journal of Applied Earth Observation and Geoinformation, 105, 102613.
- Open Access
Cloud Optimized Raster Encoding (CORE): A Web-Native Streamable Format for Large Environmental Time Series
The Environmental Data Portal EnviDat aims to fuse data publication repository functionalities with next-generation web-based environmental geospatial information systems (web-EGIS) and Earth Observation (EO) data cube functionalities. User requirements related to mapping and visualization represent a major challenge for current environmental data portals. The new Cloud Optimized Raster Encoding (CORE) format enables an efficient storage and management of gridded data by applying video encoding algorithms. Inspired by the cloud optimized GeoTIFF (COG) format, the design of CORE is based on the same principles that enable efficient workflows on the cloud, addressing web-EGIS visualization challenges for large environmental time series in geosciences. CORE is a web-native streamable format that can compactly contain raster imagery as a data hypercube. It enables simultaneous exchange, preservation, and fast visualization of time series raster data in environmental repositories. The CORE format specifications are open source and can be used by other platforms to manage and visualize large environmental time series.
Open AccessCloud Optimized Raster Encoding (CORE): A Web-Native Streamable Format for Large Environmental Time Series
The Environmental Data Portal EnviDat aims to fuse data publication repository functionalities with next-generation web-based environmental geospatial information systems (web-EGIS) and Earth Observation (EO) data cube functionalities. User requirements related to mapping and visualization represent a major challenge for current environmental data portals. The new Cloud Optimized Raster Encoding (CORE) format enables an efficient storage and management of gridded data by applying video encoding algorithms. Inspired by the cloud optimized GeoTIFF (COG) format, the design of CORE is based on the same principles that enable efficient workflows on the cloud, addressing web-EGIS visualization challenges for large environmental time series in geosciences. CORE is a web-native streamable format that can compactly contain raster imagery as a data hypercube. It enables simultaneous exchange, preservation, and fast visualization of time series raster data in environmental repositories. The CORE format specifications are open source and can be used by other platforms to manage and visualize large environmental time series.
- Open Access
- 10 January 2019
- Published by MDPI AG in Remote Sensing
- Vol. 11 (2) , 115
Rapid Detection of Windthrows Using Sentinel-1 C-Band SAR Data
Storm events are capable of causing windthrow to large forest areas. A rapid detection of the spatial distribution of the windthrown areas is crucial for forest managers to help them direct their limited resources. Since synthetic aperture radar (SAR) data is acquired largely independent of daylight or weather conditions, SAR sensors can produce temporally consistent and reliable data with a high revisit rate. In the present study, a straightforward approach was developed that uses Sentinel-1 (S-1) C-band VV and VH polarisation data for a rapid windthrow detection in mixed temperate forests for two study areas in Switzerland and northern Germany. First, several S-1 acquisitions of approximately 10 before and 30 days after the storm event were radiometrically terrain corrected. Second, based on these S-1 acquisitions, a SAR composite image of before and after the storm was generated. Subsequently, after analysing the differences in backscatter between before and after the storm within windthrown and intact forest areas, a change detection method was developed to suggest potential locations of windthrown areas of a minimum extent of 0.5 ha—as is required by the forest management. The detection is based on two user-defined parameters. While the results from the independent study area in Germany indicated that the method is very promising for detecting areal windthrow with a producer’s accuracy of 0.88, its performance was less satisfactory at detecting scattered windthrown trees. Moreover, the rate of false positives was low, with a user’s accuracy of 0.85 for (combined) areal and scattered windthrown areas. These results underscore that C-band backscatter data have great potential to rapidly detect the locations of windthrow in mixed temperate forests within a short time (approx. two weeks) after a storm event. Furthermore, the two adjustable parameters allow a flexible application of the method tailored to the user’s needs.
- 10 January 2019
- Published by MDPI AG in Remote Sensing
- Vol. 11 (2) , 115
Open AccessRapid Detection of Windthrows Using Sentinel-1 C-Band SAR Data
Storm events are capable of causing windthrow to large forest areas. A rapid detection of the spatial distribution of the windthrown areas is crucial for forest managers to help them direct their limited resources. Since synthetic aperture radar (SAR) data is acquired largely independent of daylight or weather conditions, SAR sensors can produce temporally consistent and reliable data with a high revisit rate. In the present study, a straightforward approach was developed that uses Sentinel-1 (S-1) C-band VV and VH polarisation data for a rapid windthrow detection in mixed temperate forests for two study areas in Switzerland and northern Germany. First, several S-1 acquisitions of approximately 10 before and 30 days after the storm event were radiometrically terrain corrected. Second, based on these S-1 acquisitions, a SAR composite image of before and after the storm was generated. Subsequently, after analysing the differences in backscatter between before and after the storm within windthrown and intact forest areas, a change detection method was developed to suggest potential locations of windthrown areas of a minimum extent of 0.5 ha—as is required by the forest management. The detection is based on two user-defined parameters. While the results from the independent study area in Germany indicated that the method is very promising for detecting areal windthrow with a producer’s accuracy of 0.88, its performance was less satisfactory at detecting scattered windthrown trees. Moreover, the rate of false positives was low, with a user’s accuracy of 0.85 for (combined) areal and scattered windthrown areas. These results underscore that C-band backscatter data have great potential to rapidly detect the locations of windthrow in mixed temperate forests within a short time (approx. two weeks) after a storm event. Furthermore, the two adjustable parameters allow a flexible application of the method tailored to the user’s needs.