Xabier Judez
Research Subjects
Xabier Judez has a total of 84 co-authors. Here are the top co-authors by number of shared publications:
- Chunmei Li
Centre for Cooperative Research on Alternative Energies (CIC energiGUNE), Basque Research and Technology Alliance (BRTA), Alava Technology Park, Albert Einstein 48, 01510 Vitoria-Gasteiz, Spain
21 shared publications - Heng Zhang
Key Laboratory of Material Chemistry for Energy Conversion and Storage (Ministry of Education) School of Chemistry and Chemical Engineering Huazhong University of Science and Technology Wuhan China
20 shared publications Michel Armand
Centre for Cooperative Research on Alternative Energies (CIC energiGUNE) Basque Research and Technology Alliance (BRTA) Alava Technology Park, Albert Einstein 48 01510 Vitoria‐Gasteiz Spain
12 shared publications- Michel Armand
Centre for Cooperative Research on Alternative Energies (CIC Energigune) Basque Research and Technology Alliance (BRTA) Vitoria‐Gasteiz Spain
11 shared publications Gebrekidan Gebresilassie Eshetu
7 shared publications- Iñigo Garbayo
National Renewable Energy Centre of Spain (CENER)
7 shared publications
Latest Publications
- 28 October 2026
- Published by Elsevier in Electrochimica Acta
- Vol. 581
Advanced electrochemical characterization of button solid oxide cells by integrated DRT analyses and multi-physics modeling
- 28 October 2026
- Published by Elsevier in Electrochimica Acta
- Vol. 581
Advanced electrochemical characterization of button solid oxide cells by integrated DRT analyses and multi-physics modeling
- 23 October 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (20) , 204505
Successful Scale-Up of Solid Oxide Cell Manufacturing through Multilayer Water-Based Pre-Industrial Tape Casting
The scale-up of solid oxide cells (SOCs) manufacturing is critical for its industrial implementation. However, it presents significant challenges, including obtaining defect-free, dimensionally uniform layers and reproducible microstructure, controlling slurry properties, and minimizing resource consumption and waste generation. This work details the successful transition of a half-cell fabrication route (Ni-YSZ/YSZ) from laboratory scale to a pre-industrial roll-to-roll system, representing one of the first demonstrations of water-based multilayer casting at this scale. The scale-up was performed using water-based slurries as a feasible alternative to conventional organic-based systems, by carefully adjusting both slurry preparation and deposition parameters (i.e. gap, casting speed and drying temperature). While implementing pre-industrial fabrication, reduced slurry viscosity, sample reproducibility and appropriate microstructure were observed, resulting in maintained electrochemical performance (0.38 ± 0.02 and 0.42 ± 0.04 W cm −2 , using LSM-YSZ oxygen electrode). In addition, the optimized multilayer deposition resulted in fivefold increase in production capacity, from ∼ 30 to > 150 half-cells per week, as well as cost-efficient material utilization (from 3.5 to 0.7 € material cost per half-cell). These findings demonstrate the feasibility of high-throughput water-based SOCs manufacturing by a more sustainable process and offer a pathway toward the cost-effective production of next-generation energy technologies.
- 23 October 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (20) , 204505
Successful Scale-Up of Solid Oxide Cell Manufacturing through Multilayer Water-Based Pre-Industrial Tape Casting
The scale-up of solid oxide cells (SOCs) manufacturing is critical for its industrial implementation. However, it presents significant challenges, including obtaining defect-free, dimensionally uniform layers and reproducible microstructure, controlling slurry properties, and minimizing resource consumption and waste generation. This work details the successful transition of a half-cell fabrication route (Ni-YSZ/YSZ) from laboratory scale to a pre-industrial roll-to-roll system, representing one of the first demonstrations of water-based multilayer casting at this scale. The scale-up was performed using water-based slurries as a feasible alternative to conventional organic-based systems, by carefully adjusting both slurry preparation and deposition parameters (i.e. gap, casting speed and drying temperature). While implementing pre-industrial fabrication, reduced slurry viscosity, sample reproducibility and appropriate microstructure were observed, resulting in maintained electrochemical performance (0.38 ± 0.02 and 0.42 ± 0.04 W cm −2 , using LSM-YSZ oxygen electrode). In addition, the optimized multilayer deposition resulted in fivefold increase in production capacity, from ∼ 30 to > 150 half-cells per week, as well as cost-efficient material utilization (from 3.5 to 0.7 € material cost per half-cell). These findings demonstrate the feasibility of high-throughput water-based SOCs manufacturing by a more sustainable process and offer a pathway toward the cost-effective production of next-generation energy technologies.
- Open Access
- 9 February 2026
- Published by Elsevier in Energy Reports
- Vol. 15
Current market status of solid oxide hydrogen technology: From starting materials to system level
- 9 February 2026
- Published by Elsevier in Energy Reports
- Vol. 15
Open AccessCurrent market status of solid oxide hydrogen technology: From starting materials to system level
- Open Access
- 15 July 2025
- Published by Elsevier in Energy Reviews
- Vol. 4 (3)
Design and materials of interconnect plates in planar solid oxide cell stacks: A review on degradation mitigation strategies
- 15 July 2025
- Published by Elsevier in Energy Reviews
- Vol. 4 (3)
Open AccessDesign and materials of interconnect plates in planar solid oxide cell stacks: A review on degradation mitigation strategies
- Open Access
- 3 July 2025
- Published by Elsevier in Energy Conversion and Management: X
- Vol. 27
Techno-economic feasibility of solid oxide electrolysis hybridization with solar photovoltaics and batteries for green hydrogen production
- 3 July 2025
- Published by Elsevier in Energy Conversion and Management: X
- Vol. 27
Open AccessTechno-economic feasibility of solid oxide electrolysis hybridization with solar photovoltaics and batteries for green hydrogen production
- Open Access
- 22 December 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 142, 627-641
Techno-economic assessment of MW-scale solid oxide electrolysis hydrogen production plant: Integrating possibilities in Spain
- 22 December 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 142, 627-641
Open AccessTechno-economic assessment of MW-scale solid oxide electrolysis hydrogen production plant: Integrating possibilities in Spain
- Open Access
- 16 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 6 (6) , 3579-3589
High Energy Density Lithium–Sulfur Batteries Based on Carbonaceous Two-Dimensional Additive Cathodes
The increasing demand for electrical energy storage makes it essential to explore alternative battery chemistries that overcome the energy-density limitations of the current state-of-the-art lithium-ion batteries. In this scenario, lithium-sulfur batteries (LSBs) stand out due to the low cost, high theoretical capacity, and sustainability of sulfur. However, this battery technology presents several intrinsic limitations that need to be addressed in order to definitively achieve its commercialization. Herein, we report the fruitfulness of three different formulations using well-selected functional carbonaceous additives for sulfur cathode development, an in-house synthesized graphene-based porous carbon (ResFArGO), and a mixture of commercially available conductive carbons (CAs), as a facile and scalable strategy for the development of high-performing LSBs. The additives clearly improve the electrochemical properties of the sulfur electrodes due to an electronic conductivity enhancement, leading to an outstanding C-rate response with a remarkable capacity of 2 mA h cm-2 at 1C and superb capacities of 4.3, 4.0, and 3.6 mA h cm-2 at C/10 for ResFArGO10, ResFArGO5, and CAs, respectively. Moreover, in the case of ResFArGO, the presence of oxygen functional groups enables the development of compact high sulfur loading cathodes (>4 mgS cm-2) with a great ability to trap the soluble lithium polysulfides. Notably, the scalability of our system was further demonstrated by the assembly of prototype pouch cells delivering excellent capacities of 90 mA h (ResFArGO10 cell) and 70 mA h (ResFArGO5 and CAs cell) at C/10.
- 16 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 6 (6) , 3579-3589
Open AccessHigh Energy Density Lithium–Sulfur Batteries Based on Carbonaceous Two-Dimensional Additive Cathodes
The increasing demand for electrical energy storage makes it essential to explore alternative battery chemistries that overcome the energy-density limitations of the current state-of-the-art lithium-ion batteries. In this scenario, lithium-sulfur batteries (LSBs) stand out due to the low cost, high theoretical capacity, and sustainability of sulfur. However, this battery technology presents several intrinsic limitations that need to be addressed in order to definitively achieve its commercialization. Herein, we report the fruitfulness of three different formulations using well-selected functional carbonaceous additives for sulfur cathode development, an in-house synthesized graphene-based porous carbon (ResFArGO), and a mixture of commercially available conductive carbons (CAs), as a facile and scalable strategy for the development of high-performing LSBs. The additives clearly improve the electrochemical properties of the sulfur electrodes due to an electronic conductivity enhancement, leading to an outstanding C-rate response with a remarkable capacity of 2 mA h cm-2 at 1C and superb capacities of 4.3, 4.0, and 3.6 mA h cm-2 at C/10 for ResFArGO10, ResFArGO5, and CAs, respectively. Moreover, in the case of ResFArGO, the presence of oxygen functional groups enables the development of compact high sulfur loading cathodes (>4 mgS cm-2) with a great ability to trap the soluble lithium polysulfides. Notably, the scalability of our system was further demonstrated by the assembly of prototype pouch cells delivering excellent capacities of 90 mA h (ResFArGO10 cell) and 70 mA h (ResFArGO5 and CAs cell) at C/10.
- Open Access
- 18 May 2022
- Published by Wiley in Batteries & Supercaps
- Vol. 5 (9)
Graphene‐based Activated Carbon Composites for High Performance Lithium‐Sulfur Batteries
The increasing demand for electrical energy storage requires the exploration of alternative battery chemistries that overcome the limitations of the current state‐of‐the‐art lithium‐ion batteries. In this scenario, lithium‐sulfur batteries stand out for their high theoretical energy density. However, several inherent limitations still hinder their commercialization. In this work, we report the synthesis and study of two high‐performance activated carbon‐based materials that allow to overcome the most challenging limitations of sulfur electrodes, i. e., low electronic conductivity and the polysulfide shuttle effect. The two tailored nanomaterials are based on porous carbon structures mixed with conductive reduced graphene oxide, one derived from an organic waste and the other from an organic synthetic route. These structures not only feature excellent individual properties, but also present excellent performance when implemented in batteries, related to their superior conductivity and polysulfide trapping ability, allowing to obtain improved rate capacity and high sulfur loading cycling. Additionally, we demonstrate the scalability of the best performing material by the assembly of high‐performance pouch cells.
- 18 May 2022
- Published by Wiley in Batteries & Supercaps
- Vol. 5 (9)
Open AccessGraphene‐based Activated Carbon Composites for High Performance Lithium‐Sulfur Batteries
The increasing demand for electrical energy storage requires the exploration of alternative battery chemistries that overcome the limitations of the current state‐of‐the‐art lithium‐ion batteries. In this scenario, lithium‐sulfur batteries stand out for their high theoretical energy density. However, several inherent limitations still hinder their commercialization. In this work, we report the synthesis and study of two high‐performance activated carbon‐based materials that allow to overcome the most challenging limitations of sulfur electrodes, i. e., low electronic conductivity and the polysulfide shuttle effect. The two tailored nanomaterials are based on porous carbon structures mixed with conductive reduced graphene oxide, one derived from an organic waste and the other from an organic synthetic route. These structures not only feature excellent individual properties, but also present excellent performance when implemented in batteries, related to their superior conductivity and polysulfide trapping ability, allowing to obtain improved rate capacity and high sulfur loading cycling. Additionally, we demonstrate the scalability of the best performing material by the assembly of high‐performance pouch cells.
- Open Access
- 10 November 2021
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 33 (22) , 8812-8821
Safe, Flexible, and High-Performing Gel-Polymer Electrolyte for Rechargeable Lithium Metal Batteries
- 10 November 2021
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 33 (22) , 8812-8821
Open AccessSafe, Flexible, and High-Performing Gel-Polymer Electrolyte for Rechargeable Lithium Metal Batteries
- 14 February 2021
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 4 (3) , 2463-2470
Alumina Nanofilms As Active Barriers for Polysulfides in High-Performance All-Solid-State Lithium–Sulfur Batteries
- 14 February 2021
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 4 (3) , 2463-2470
Alumina Nanofilms As Active Barriers for Polysulfides in High-Performance All-Solid-State Lithium–Sulfur Batteries