FGFeilong Gong

Feilong Gong

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Feilong Gong has a total of 223 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Self‐Supported Flexible Film F‐Pt 1 /MnO 2 With Long Bending Cyclability Towards Robust Wearable Al‐Air Batteries

    by Hongge Zhang, Gongchu Shi, Zexin Wei, Chuanchuan Zhao, Min Song, Lihua Gong, Shizhong Wei, Feilong Gong

    Flexible Al‐air batteries are promising power supplies for wearable electronics, yet the practical application is severely hindered by poor mechanical stability of powder‐based cathode and inferior alkaline corrosion resistance. Here, derived from a jelly‐like precursor, we develop a binder‐free self‐supported flexible film F‐Pt 1 /MnO 2 to address these issues. Combined with structural characterizations and finite element analysis simulations, the self‐supported film features interconnected hierarchical pore channels and a mechanically robust network that enhances its long bending cyclability from 0 to 180° over 5000 cycles with a slight △R/R 0 alternation of 2%. Benefiting from the binder‐free structure, the film retains structural integrity with no material exfoliation after 15 days of hot alkaline aging treatment. When employed as a cathode in a flexible Al‐air battery, it delivers a peak power density of 77.9 mW cm −2 and stable discharge performance for over 27 h, exceeding most of the recently reported catalysts. Due to the battery's stable output under wide‐scale bending angles, a wearable device is further driven that can detect long‐term pulse signals under frequent deformation. This work provides a facile and general strategy for the rational design and fabrication of robust free‐standing film for wearable energy storage and conversion devices.

  • Open Access

    Hollow Nanoreactors Modulate Mass Transfer and Dual‐Species Spillover to Boost Nitrate‐to‐Ammonia Reduction in Real Wastewater

    by Penglei Zhang, Chaoqun Chang, Min Song, Gongchu Shi, Lihua Gong, Shizhong Wei, Feilong Gong

    Copper‐based materials are promising catalysts for electrocatalytic nitrate reduction to ammonia (NH 3 ), while their use in real wastewater with low nitrate concentrations is hindered by poor mass transfer and high energy barrier. To overcome these limitations, we design a hollow Cu/MoS 2 ‐550 nanoreactor, consisting of hollow MoS 2 support loaded with Cu single atoms and clusters. At the mesoscale, the hollow MoS 2 support features a heat‐exchanger‐fin‐like structure that accelerates mass transfer, thereby promoting local enrichment of NO 3 − . At the microscale, precise modulation of sulfur vacancy concentration in MoS 2 triggers dual‐species spillover, namely reverse hydrogen spillover and *NO spillover from Cu single atoms to Cu clusters, which lowers the energy barrier of deep hydrogenation step. As a result, the Cu/MoS 2 ‐550 nanoreactor achieves an NH 3 Faradaic efficiency (FE) of 98.14% and a yield rate of 27.46 mg h −1 mg cat −1 . Furthermore, when assembled into an Al‐NO 3 − battery operating in real wastewater containing only ∼ 0.76 mM NO 3 − , the battery runs stably for 120 h, delivers an NH 3 FE of 53.20%, and maintains a nitrate removal rate of 91.17%. This work provides cross‐scale modulation strategies to overcome mass‐transfer bottlenecks and energy barriers in multi‐electron transfer reactions, offering a potential pathway for environmental applications.

  • A Universal Precipitation‐Transformation Strategy Toward Low‐Defect Prussian Blue Analogs for High‐Performance Sodium‐Ion Batteries

    by Shumin Sun, Peiyuan Wang, Yu Yao, Haibo Lei, Denggui Zhu, Yonghao Li, Yonghui Zhang, Feilong Gong, Jian Liu, Shaoming Fang

    Prussian blue analogs (PBAs) are considered promising cathode materials for sodium‐ion batteries (SIBs) due to their low cost and open framework structure. However, their practical application is hindered by intrinsic [Fe(CN) 6 ] 4− vacancies and coordinated water, which degrade electrochemical performance, alongside challenges in scalable and cost‐effective synthesis. Herein, we report a universal precipitation‐transformation strategy that utilizes insoluble metal compounds as precursors to synthesize highly crystalline PBAs. This approach leverages the slow dissolution‐precipitation equilibrium of low‐solubility precursors to precisely control metal ion release, fundamentally retarding nucleation and crystal growth kinetics. The strategy demonstrates excellent versatility, enabling the synthesis of single‐metal, binary‐metal, multi‐metal, and even high‐entropy PBAs with monoclinic or cubic structures, and is readily scalable to 596‐gram‐level production. As a SIB cathode, the optimized Fe‐based PBA (T‐FeHCF) exhibits a high specific capacity of 150.5 mAh g −1 at 0.1 C, excellent rate capability (73.6 mAh g −1 at 20 C), and outstanding cycling stability with 93% capacity retention after 2000 cycles at 5 C. Full‐cells assembled with hard carbon anodes further demonstrate practical viability, maintaining over 85% capacity retention after 400 cycles. This cost‐effective and environmentally benign synthesis platform provides a viable pathway toward the commercialization of high‐performance PBA cathodes for sustainable energy storage.


  • Open Access

    Bioinspired Rod‐In‐Hollow‐Tube Structure With Linear Contact MoO 3 @NiMoO 4 Interface Boosting Charge Transfer and Surface Reactivity for Enhanced Triethylamine Sensing

    by Liang‐Yu Ma, Li‐Fang Cai, Fei‐Long Gong, Ke‐Feng Xie, Shi‐Zhong Wei, Xuan‐Yu Yang, Yong‐Hui Zhang

    Inspired by the efficient mass transport and interfacial exchange of natural vascular bundles, this study presents a bioinspired rod‐in‐hollow‐tube architecture, MoO 3 @NiMoO 4 ‐TH, engineered via precise kinetic control of the Kirkendall effect. This unique structure features a highly ordered, high‐curvature linear heterointerface between the MoO 3 core and NiMoO 4 shell, which significantly enhances charge transfer and reaction dynamics. The optimized heterostructure demonstrates exceptional triethylamine (TEA) sensing performance, achieving a remarkable response (R a /R g = 513.5 ± 3.8, n = 3 at 50 ppm TEA and 210°C) and ultrafast response/recovery times (7 s/51 s) with linear detection ranges from 0.5 to 200 ppm TEA and a low detection limit of 137 ppb. In situ spectroscopic analysis and finite element simulations reveal that the well‐defined heterointerface promotes directional electron migration, enriches reactant concentration via confinement effects, and facilitates efficient activation of oxygen species. Compared to randomly distributed heterostructures, the rod‐in‐hollow‐tube configuration exhibits high surface energy and accelerated charge separation, thereby optimizing adsorption and oxidation kinetics. Practical application in monitoring fish freshness further underscores the reliability of sensors. This work establishes a generalized strategy for designing biomimetic nanomaterials with tailored interfaces, advancing high‐performance sensors for real‐time environmental monitoring and food safety.


  • Synergistically Boosting the Surface Reaction Dynamics by K + Interstitial Doping in Pd/WO 3 Nanosheets for Robust Hydrogen Sensing

    by He-Jie Wang, Hao-Nan Chen, Xuan-Yu Yang, Fei-Long Gong, Ke-Feng Xie, Shi-Zhong Wei, Yong-Hui Zhang

    The development of highly sensitive and reliable hydrogen detection technology is a critical prerequisite for the safe and large-scale application of green hydrogen energy. Pd-based metal oxide semiconductor sensors exhibit decent sensing performance; however, their development for hydrogen detection is hindered by competitive adsorption of hydrogen and oxygen on the surface and sluggish reaction kinetics due to limited active interfaces. Here, a series of Pd nanoparticle-decorated, K+ interstitial doping WO3 nanosheets (PdNP-K/WO3-x) were synthesized. The optimized PdNP-K/WO3-15 sample exhibited exceptional H2 sensing performance, including a high response (Ra/Rg = 1235.94 to 50 ppm H2) at a low temperature of 130 °C, with fast response/recovery. This enhancement stems from synergistic effects where K+ interstitial doping increases electron density and oxygen vacancies in WO3, improving charge transfer and strengthening the W-O-Pd interface. The resulting electron-rich environment also shifts the d-band center of Pd, enhancing hydrogen desorption and spillover, while reducing competitive oxygen adsorption to free up more Pd active sites. The material also showed promising room-temperature sensing, indicating strong application potential and providing a theoretical basis for designing high-performance alkali metal ion-doped metal oxide materials.


  • Top Cited Papers
    Open Access

    Lewis acid-triggered hydroxyl spillover enables selective urea electrooxidation to nitrite with concurrent energy-saving hydrogen production

    by Chao Fan, Meng Zhang, Yunchao Li, Yali Zhang, Yan-Qin Wang, Feilong Gong, Jian Liu

    Nitrite (NO2⁻) is a high-value chemical pivotal to agriculture and pharmaceuticals, yet its conventional via the Ostwald process is energy-intensive and polluting. Electrochemical urea oxidation reaction (UOR) offers a sustainable NO2⁻ synthesis pathway with concurrent energy-saving hydrogen (H2) production, but suffers from non-selective N2/CO2 pathways. Here, we report Cr3+ Lewis acid sites in Ni3S2 that act as hydroxyl (OH⁻) pumps, dynamically spilling OH⁻ to adjacent Ni sites via a Lewis acid-base interaction. This triggers a urea-to-NO2⁻ pathway, achieving a NO2⁻ yield of 120.98 mg h-1 cm-2 (600 mA cm-2). The OH⁻ spillover accelerates C-N cleavage while suppressing N-N coupling, enabling energy-saving H2 production (3.7 kWh m-3 at 500 mA cm-2) and Zn-urea-air batteries (charging potential 288 mV lower than Zn-air). Techno-economic analysis reveals $1,210.5 per ton of urea processed at 400 mA cm-2. This work establishes OH⁻ spillover as a universal design principle for selective electrocatalysis.


  • Top Cited Papers

    Nucleophilicity‐S and Electrophilicity‐Ni Sites Over Ni@MoS 2 Nanoreactors Enable Highly Efficient Hydrazine‐Assisted Hydrogen Production

    by Qing Xu, Xiaohu Chen, Cailing He, Lihua Gong, Zhilin Chen, Yonghui Zhang, Min Song, Miao Du, Feilong Gong

    Hydrazine‐assisted water electrolysis offers a promising strategy for hydrogen production by significantly reducing the energy consumption while simultaneously enabling the remediation of hazardous hydrazine‐containing wastewater. However, the development of efficient bifunctional electrocatalysts remains challenging due to the incompatible reaction mechanisms of the hydrazine oxidation reaction (HzOR) and the hydrogen evolution reaction (HER). Herein, we design a hollow MoS 2 nanoreactor decorated with Ni nanoparticles (Ni x @MoS 2 ) featuring strong metal‐support interaction (SMSI). The SMSI‐induced interfacial electron redistribution creates nucleophilic S sites and electrophilic Ni sites, which synergistically lower H * adsorption energy barrier in HER and favor the N─N bond breakage in HzOR. The optimized Ni 2 @MoS 2 nanoreactor demonstrates exceptional bifunctional performance, achieving a current density of 100 mA cm – 2 at only 0.193 V in hybrid HzOR‐assisted water electrolysis, outperforming the most reported bifunctional catalysts. Moreover, the electrolyzer exhibits excellent long‐term operational stability, maintaining consistent performance over 200 h at 200 mA cm −2 . This work proposes a plausible N─N bond breakage pathway in HzOR enabled by SMSI strategy, offering new insights into the water electrolysis for green hydrogen production.


  • Hollow MoS2/MoO3 Nanoreactors Optimize Triethylamine Oxidation Route for Boosted Sensing Performance

    by Huanxin Wang, Zexin Wei, Lailin Wang, Zhenxing Li, Jingxuan Liu, Xixia Zhu, Fengting Qin, Xiaozhe Zeng, Haitao Li, Yonghui Zhang, et al.

    Triethylamine (TEA), a strong irritating and combustible gas, is extremely dangerous to both human health and the surrounding environment. However, developing TEA sensors with high sensitivity and fast response remains a great challenge. Herein, we report hollow nanoreactors to optimize the TEA oxidation route for boosted sensing performance. Specifically, a group of MoS2/MoO3 (MSO-x) nanoreactors is controllably prepared through in situ partial oxidation strategy, using hollow hierarchical MoS2 built from 2D nanosheets as a precursor. The MSO-2 with the highest concentration of oxygen vacancy exhibits both high sensitivity and fast response, in which the sensitivity to TEA (Ra/Rg = 54.2, 10 ppm) is about 5.4-fold higher than that of the pristine MoS2, and the response time is decreased from 46 to 18 s at the working temperature of 200 °C. Finite element analysis demonstrates the increased TEA concentration inside the nanoreactor, which enhances the contact between TEA and active sites. Theoretical calculations and gas chromatograph-mass spectrometer results indicate that the MSO-2 nanoreactors toward TEA exhibit high selectivity on the pathway of acetaldehyde. The lower energy barrier on the MSO-2 implies a fast TEA oxidation rate, which consequently enhances the sensing performance. This work initially elucidates the TEA sensing mechanism from the perspective of the oxidization route, offering a valuable guidance for the rational design of high-efficiency sensing materials.


  • Open Access

    Hollow Mo/MoS Vn Nanoreactors with Tunable Built‐in Electric Fields for Sustainable Hydrogen Production

    by Feilong Gong, Zhilin Chen, Chaoqun Chang, Min Song, Yang Zhao, Haitao Li, Lihua Gong, Yali Zhang, Jie Zhang, Yonghui Zhang, et al.

    Constructing built‐in electric field (BIEF) in heterojunction catalyst is an effective way to optimize adsorption/desorption of reaction intermediates, while its precise tailor to achieve efficient bifunctional electrocatalysis remains great challenge. Herein, the hollow Mo/MoS Vn nanoreactors with tunable BIEFs are elaborately prepared to simultaneously promote hydrogen evolution reaction (HER) and urea oxidation reaction (UOR) for sustainable hydrogen production. The BIEF induced by sulfur vacancies can be modulated from 0.79 to 0.57 to 0.42 mV nm −1 , and exhibits a parabola‐shaped relationship with HER and UOR activities, the Mo/MoS V1 nanoreactor with moderate BIEF presents the best bifunctional activity. Theoretical calculations reveal that the moderate BIEF can evidently facilitate the hydrogen adsorption/desorption in the HER and the breakage of N─H bond in the UOR. The electrolyzer assembled with Mo/MoS V1 delivers a cell voltage of 1.49 V at 100 mA cm −2 , which is 437 mV lower than that of traditional water electrolysis, and also presents excellent durability at 200 mA cm −2 for 200 h. Life cycle assessment indicates the HER||UOR system possesses notable superiority across various environment impact and energy consumption. This work can provide theoretical and experimental direction on the rational design of advanced materials for energy‐saving and eco‐friendly hydrogen production.


  • Synthesis of in-plane Mo2C/MoO3 heterostructures by a novel spatial-confined partial oxidation approach for enhanced TEA sensing

    by Liang-Yu Ma, Zheng-Guang Zhao, Xuan-Yu Yang, Li-Juan Yue, Fei-Long Gong, Ke-Feng Xie, Pan-Pan Zhou, Yong-Hui Zhang

    In-plane Mo2C/MoO3 heterostructures possess rich grain boundaries which facilitate the generation of coordination unsaturated Mo atoms and thus provide the Lewis acid sites for TEA adsorption.