JLJianping Long

Jianping Long

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jianping Long has a total of 250 co-authors. Here are the top co-authors by number of shared publications:

  • Anjun Hu

    College of Materials and Chemistry & Chemical Engineering (College of Lithium Resources and Lithium Battery Industry) Chengdu University of Technology Chengdu China

    55 shared publications
  • Miao He

    State Key Laboratory of Electronic Thin Films and Integrated Devices University of Electronic Science and Technology of China Chengdu People's Republic of China

    24 shared publications
  • Ting Li

    College of Polymer Science and Engineering National Key Laboratory of Advanced Polymer Materials Sichuan University Chengdu Sichuan China

    22 shared publications
  • Kun Li

    College of Materials and Chemistry & Chemical Engineering (College of Lithium Resources and Lithium Battery Industry) Chengdu University of Technology Chengdu 610059 China

    19 shared publications
  • Borui Yang

    College of Materials and Chemistry & Chemical Engineering (College of Lithium Resources and Lithium Battery Industry) Chengdu University of Technology Chengdu 610059 China

    18 shared publications
  • Ruixin Zheng

    College of Materials and Chemistry & Chemical Engineering (College of Lithium Resources and Lithium Battery Industry) Chengdu University of Technology Chengdu 610059 P. R. China

    17 shared publications

Latest Publications

  • Bio-inspired self-assembly of ordered interface topology for robust composite solid electrolytes

    by Youwei Wang, Anjun Hu, Feng Sun, Wei Yang, Yuanjian Li, Kai Chen, Yajie Hu, Yongbiao Mu, Lin Yang, Zhenzhen Shen, et al.

    A bio-inspired self-assembly strategy enables composite solid-state electrolytes with fast ion transport, stable interfaces, strong dendrite suppression, high conductivity, mechanical robustness, and excellent cycling stability.

  • Π‐Conjugated Polyphenols Regulate Interfacial Charge to Stabilize Lattice Oxygen in High‐Voltage Ni‐Rich Cathodes

    by Yupeng Feng, Xin Liu, Anjun Hu, Yaoyu Yin, Yuhang Shu, Haohan Chen, Ruizhe Xu, Youwei Wang, Xiangsong Jiang, Maokun Li, et al.

    Ni‐rich layered cathodes operated at high voltages suffer from pronounced lattice‐oxygen activation during deep delithiation, which triggers oxygen release, interfacial parasitic reactions, transition‐metal destabilization, and rapid structural degradation. Here, a biomimetic interfacial‐regulation strategy is reported for high‐voltage LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathodes by introducing natural anthocyanins as π‐conjugated polyphenol additives. Enabled by their conjugated electronic framework and catechol‐derived binding sites, anthocyanin molecules preferentially accumulate at the cathode/electrolyte interface, where they regulate the local charge environment through anion coordination and interfacial electron delocalization. This molecularly regulated interphase moderates excessive lattice‐oxygen involvement during deep delithiation and suppresses irreversible oxygen‐related degradation, while promoting a thin, uniform CEI with reduced interfacial resistance and improved apparent Li + transport kinetics. As a result, gas evolution, transition‐metal dissolution, phase transition, and intragranular cracking are all effectively alleviated under high‐voltage operation. Li||NCM811 cells deliver markedly improved cycling stability, retaining 81.4% of their capacity after 200 cycles at 4.6 V and 80.0% after over 500 cycles at 4.3 V. This work establishes π‐conjugated polyphenols as a class of interfacial charge regulators for stabilizing lattice oxygen in Ni‐rich layered cathodes and offers a molecular design principle for high‐energy cathode interfaces.


  • Π‐Conjugated Polyphenols Regulate Interfacial Charge to Stabilize Lattice Oxygen in High‐Voltage Ni‐Rich Cathodes

    by Yupeng Feng, Xin Liu, Anjun Hu, Yaoyu Yin, Yuhang Shu, Haohan Chen, Ruizhe Xu, Youwei Wang, Xiangsong Jiang, Maokun Li, et al.

    Ni‐rich layered cathodes operated at high voltages suffer from pronounced lattice‐oxygen activation during deep delithiation, which triggers oxygen release, interfacial parasitic reactions, transition‐metal destabilization, and rapid structural degradation. Here, a biomimetic interfacial‐regulation strategy is reported for high‐voltage LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathodes by introducing natural anthocyanins as π‐conjugated polyphenol additives. Enabled by their conjugated electronic framework and catechol‐derived binding sites, anthocyanin molecules preferentially accumulate at the cathode/electrolyte interface, where they regulate the local charge environment through anion coordination and interfacial electron delocalization. This molecularly regulated interphase moderates excessive lattice‐oxygen involvement during deep delithiation and suppresses irreversible oxygen‐related degradation, while promoting a thin, uniform CEI with reduced interfacial resistance and improved apparent Li + transport kinetics. As a result, gas evolution, transition‐metal dissolution, phase transition, and intragranular cracking are all effectively alleviated under high‐voltage operation. Li||NCM811 cells deliver markedly improved cycling stability, retaining 81.4% of their capacity after 200 cycles at 4.6 V and 80.0% after over 500 cycles at 4.3 V. This work establishes π‐conjugated polyphenols as a class of interfacial charge regulators for stabilizing lattice oxygen in Ni‐rich layered cathodes and offers a molecular design principle for high‐energy cathode interfaces.

  • Open Access

    Interfacial Electronic Coupling in the GeSe 2 /Volcanic‐Rock–Like Carbon Framework Activates Reversible Intermediate Conversion for High‐Rate Sodium Storage

    by Hailong Yang, Jiahao Zhao, Zhongmin Lang, Rui Li, Boyu Sun, Jianping Long, Jinlong Cui, Anjun Hu

    GeSe 2 is a promising conversion–alloying anode for sodium‐ion batteries owing to its high theoretical capacity, suitable operating voltage, and layered structure. However, its practical application is hindered by severe volume expansion, sluggish Na + transport kinetics, unstable interfacial evolution, and irreversible sodiation intermediates. Herein, GeSe 2 nanosheets are uniformly anchored on a coal‐gasification‐residue–derived volcanic‐rock–like carbon framework through a combined sol‐gel and solid‐state selenization strategy, constructing a robust GeSe 2 /C composite. The carbon framework buffers the volume variation of GeSe 2 , stabilizes the solid–electrolyte interphase, and provides continuous pathways for rapid electron/ion transport. Significantly, Se─C‐bond–mediated interfacial electronic coupling induces charge redistribution at the GeSe 2 /C interface, enhancing Na + adsorption and migration in GeSe 2 and its key intermediates, Na 2 Ge 2 Se 5 and Na 2 GeSe 3 . This promotes the electrochemical reversibility of sodiation intermediates, suppresses irreversible Na + consumption, and improves the initial Coulombic efficiency. Consequently, the optimized GeSe 2 /C anode delivers 389.6 mAh g −1 at 0.1 A g −1 and retains 308.9 mAh g −1 at 20.0 A g −1 , corresponding to 79.3% capacity retention. The initial Coulombic efficiency (ICE) increases from 47.4% for pristine GeSe 2 to 74.0% for GeSe 2 /C, with the normalized ICE of GeSe 2 reaching 81.8%. Moreover, GeSe 2 /C maintains 297.2 mAh g −1 after 2000 cycles at 20.0 A g −1 , demonstrating excellent high‐rate sodium‐storage durability.

  • Backbone‐Mediated Coordination‐Environment Reshaping in Gel Polymer Electrolytes for High‐Voltage Lithium Metal Batteries

    by Yajie Hu, Jianxing Wang, Ting Li, Jinyu Tian, Ying Xu, Yifan Deng, Xin Zhang, Jie Hu, Zihan Chen, Miao He, et al.

    Conventional linear polyether electrolytes feature abundant ether‐oxygen sites that dominate the primary Li + solvation shell, limiting anion participation and undermining ion transport and high‐voltage stability. A backbone‐mediated coordination‐environment reshaping strategy is proposed by incorporating diglycidyl 1,2‐cyclohexanedicarboxylate (DCD) into the copolymerization of 1,3‐dioxolane (DOL), yielding an in situ crosslinked gel polymer electrolyte, P(DCD‐DOL). The weakly coordinating ester carbonyl groups and the spatially restricted ether‐oxygen sites in the crosslinked network jointly weaken backbone–Li + coordination and promote anion/solvent participation in the Li + solvation shell. Multiscale characterizations and theoretical simulations confirm that P(DCD‐DOL) effectively optimizes the Li + solvation structure, leading to a high Li + transference number of 0.64, an oxidative stability window of 5.20 V, and inorganic‐rich electrode–electrolyte interphases. Consequently, Li||NCM811 cells with P(DCD‐DOL) retain 84.21% capacity after 500 cycles at 4.3 V, and 80.62% after 200 cycles at 4.5 V. Moreover, a 0.9 Ah pouch cell achieves an energy density of 305 Wh kg −1 and retains 82.33% capacity over 180 cycles. This work highlights polymer backbone engineering as an effective route to regulate Li + coordination and interfacial chemistry in high‐voltage lithium metal batteries.

  • Backbone‐Mediated Coordination‐Environment Reshaping in Gel Polymer Electrolytes for High‐Voltage Lithium Metal Batteries

    by Yajie Hu, Jianxing Wang, Ting Li, Jinyu Tian, Ying Xu, Yifan Deng, Xin Zhang, Jie Hu, Zihan Chen, Miao He, et al.

    Conventional linear polyether electrolytes feature abundant ether‐oxygen sites that dominate the primary Li + solvation shell, limiting anion participation and undermining ion transport and high‐voltage stability. A backbone‐mediated coordination‐environment reshaping strategy is proposed by incorporating diglycidyl 1,2‐cyclohexanedicarboxylate (DCD) into the copolymerization of 1,3‐dioxolane (DOL), yielding an in situ crosslinked gel polymer electrolyte, P(DCD‐DOL). The weakly coordinating ester carbonyl groups and the spatially restricted ether‐oxygen sites in the crosslinked network jointly weaken backbone–Li + coordination and promote anion/solvent participation in the Li + solvation shell. Multiscale characterizations and theoretical simulations confirm that P(DCD‐DOL) effectively optimizes the Li + solvation structure, leading to a high Li + transference number of 0.64, an oxidative stability window of 5.20 V, and inorganic‐rich electrode–electrolyte interphases. Consequently, Li||NCM811 cells with P(DCD‐DOL) retain 84.21% capacity after 500 cycles at 4.3 V, and 80.62% after 200 cycles at 4.5 V. Moreover, a 0.9 Ah pouch cell achieves an energy density of 305 Wh kg −1 and retains 82.33% capacity over 180 cycles. This work highlights polymer backbone engineering as an effective route to regulate Li + coordination and interfacial chemistry in high‐voltage lithium metal batteries.


  • Open Access

    Unveiling Bi-Content-Dependent Structural Evolution: From RhBi Alloy to Atomically Dispersed Bi-Doped Rh Electrocatalysts for Enhanced Ethanol Oxidation Reaction

    by Zhicheng Xu, Jing Liu, Guijing Tan, Zhipei Wang, Kun Yang, Xiang Ji, Bingbao Mei, Jianping Long

    Developing efficient electrocatalysts to accelerate the sluggish kinetics of the ethanol oxidation reaction (EOR) is critically important for advancing alkaline direct ethanol fuel cells. Herein, we report a bismuth (Bi) atomically doped Rh-based catalyst supported on N-doped carbon (RhBi/NBP) as a high-performance EOR electrocatalyst. Physical characterizations reveal a Bi-content-dependent structural evolution: at low Bi loadings, Bi atoms are incorporated into the Rh lattice in an atomically dispersed form, rather than forming a conventional RhBi alloy phase. Benefiting from this unique architecture, the optimized RhBi/NBP catalyst delivers a current density of 28.4 mA cm-2 at 0.68 V vs. RHE in 1.0 M KOH + 0.5 M CH3CH2OH, corresponding to a remarkable mass activity of 2363 mA mgRh-1. Furthermore, its mass activity reaches 4743 mA mgRh-1 in 1.0 M KOH + 1.0 M CH3CH2OH, surpassing most previously reported Rh-based EOR catalysts. The exceptional performance may be attributed to the reason that the atomically dispersed Bi dopants not only supply abundant oxygen-containing species to facilitate the oxidative removal of reaction intermediates but also weaken the adsorption of CO-like poisoning species on the catalyst surface. This work offers a promising strategy for the rational design of efficient and durable Rh-based electrocatalysts for ethanol oxidation.

  • Open Access

    Boosting Oxygen Reduction Electrocatalysis via p-Block Al-Modulated Fe–N–C Sites for Zinc–Air Batteries

    by Guijing Tan, Jing Liu, Zhipei Wang, Qian Liu, Xianfei Chen, Jianping Long

    Exploring strategies to enhance the oxygen reduction reaction (ORR) activity of Fe-N-C sites is a key step in achieving high-performance zinc–air batteries (ZABs), a clean energy storage and conversion technology. Here, we report an electrocatalyst (FeAl/NC) rich in Fe/Al dual-metal atomic sites, prepared by employing a ZIF-8 pore-confinement strategy to simultaneously capture iron and aluminum precursors followed by carbonization. Physical characterization confirms isolated single-atom sites and Fe/Al dual-metal atomic sites with electron transfer from Al to Fe within FeAl/NC. Electrochemical measurements show that FeAl/NC displays outstanding ORR electrocatalytic performance, achieving a half-wave potential of 0.897 V and remarkable durability. The FeAl/NC-based ZAB exhibits a high peak power density of 203.88 mW cm⁻² and exceptional operational stability for over 250 hours at 20 mA cm⁻². The excellent performance may be ascribed to electron transfer from Al to neighboring Fe sites, which mitigates excessively strong *OH adsorption at Fe sites and promotes the ORR process, while increased electron density at Fe active sites can also suppress the demetalization of the active sites, thereby enhancing the durability of Fe-based ORR electrocatalyst. The study presents a universal strategy to optimize Fe–N–C-based ORR catalysts via p-block metal-mediated electronic modulation, offering a promising candidate for ZABs.

  • Open Access

    Reconstructing Residual‐Solvent‐Involved Li + Coordination in PVDF‐HFP Polymer Electrolytes for Stable Lithium Metal Batteries

    by Xiangsong Jiang, Qi Liu, Haohan Chen, Jianwei Lu, Yupeng Feng, Youwei Wang, Tianhao Zhao, Na Jiang, Wei Yang, Fei Li, et al.

    Poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP)‐based polymer electrolytes offer a combination of flexibility, mechanical robustness, and room‐temperature ion transport for lithium metal batteries. However, residual N,N‐dimethylformamide (DMF) from electrolyte fabrication readily coordinates with Li + , forming a solvent‐dominated local environment that impedes Li + migration, increases the interfacial desolvation barrier, and slows charge–transfer kinetics. Herein, we reconstruct the residual‐solvent‐involved Li + coordination environment in PVDF‐HFP polymer electrolytes by introducing 2,2,2‐trifluoroethanamide (T3AM) as a weakly coordinating molecular regulator. The electron‐withdrawing −CF 3 group weakens the Li + ‐binding affinity of T3AM, attenuating DMF‐dominated coordination and promoting TFSI − participation into the Li + coordination shell. The resulting anion‐rich Li + coordination structure facilitates both ion transport and interfacial desolvation. Consequently, the T3AM‐regulated PVDF‐HFP electrolyte delivers an ionic conductivity of 0.34 mS cm −1 , a Li + transference number of 0.55, and a critical current density of 3.4 mA cm −2 . Moreover, the regulated interfacial chemistry promotes the formation of a uniform inorganic‐rich solid electrolyte interphase, enabling stable Li||Li symmetric‐cell cycling for 1500 h and Li||NCM811 full cell with 80% capacity retention after 340 cycles at 60°C and 1C. This work highlights residual‐solvent‐involved coordination reconstruction as an effective molecular strategy for simultaneously enhancing ion transport, interfacial kinetics, and lithium‐metal stability in PVDF‐HFP polymer electrolytes.


  • Bioinspired Halloysite Nanotubes as a Triple‐Synergistic Buffer Layer for Highly Stable Zinc Metal Anodes

    by Bo Zhou, Huayuan Long, Qi Xiang, Ruyu Zhou, Haohan Chen, Zhi He, Wei Yang, Mengjiao Liu, Jianping Long, Anjun Hu

    Aqueous zinc metal batteries suffer from sluggish desolvation kinetics and non‐uniform ion flux, which synergistically induce rampant dendrite formation and detrimental side reactions. Inspired by the dynamic ion‐regulation of plant roots, a bioinspired halloysite nanotube (HNT) buffer layer is designed to construct a stable, fast‐ion‐transport interphase, resolving the stability‐conductivity trade‐off of traditional coatings. Experimental and theoretical analyses reveal that the HNT layer regulates interfacial Zn 2+ via a triple‐synergistic mechanism. The polar Si─O groups enrich Zn 2+ to form a localized ion reservoir that eliminates concentration polarization, while strong electrostatic interactions expel coordinated water to promote desolvation and suppress hydrogen evolution. Additionally, the unique tubular architecture and charge redistribution homogenize the Zn 2+ flux for dense, dendrite‐free deposition. Consequently, the HNTs@Zn anode delivers exceptional stability over 2000 h at 0.25 mA cm −2 /0.125 mAh cm −2 and 800 h at 10 mA cm −2 /5 mAh cm −2 . Furthermore, Zn||AC (AC: activated carbon) full cells achieve over 10,000 stable cycles with markedly enhanced rate capability. This bioinspired, mineral‐based strategy provides a scalable and highly effective paradigm for long‐lifespan aqueous metal batteries.