Souvik Mahapatra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Souvik Mahapatra has a total of 145 co-authors. Here are the top co-authors by number of shared publications:
- Narendra Parihar
Department of Electrical Engineering, IIT Bombay, Mumbai 400076, India
15 shared publications Narendra Parihar
Indian Institute of Technology Bombay
14 shared publications- Nilesh Goel
BITS Pilani Dubai
10 shared publications Nilotpal Choudhury
Indian Institute of Technology Bombay
9 shared publicationsTarun Samadder
Indian Institute of Technology Bombay
9 shared publications- Nilotpal Choudhury
Department of Electrical Engineering, Indian Institute of Technology Bombay (IIT Bombay), Mumbai, India
7 shared publications
Latest Publications
- 5 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. PP  (00189383) , 1-7
Fully Physical BTI Analysis Tool (BAT) for Modeling of NBTI Architecture, Materials, Process, and Dimension Dependence
The fully physical bias temperature instability (BTI) analysis tool (BAT) is utilized to analyze measured negative bias temperature instability (NBTI) in MOSFETs featuring different architectures, gate insulator processes, channel compositions, and dimensions. Stress and recovery time kinetics are modeled at various DC and AC experimental conditions; the instability is decomposed into several physics-based underlying subcomponents, each of them with characteristic stress and recovery time kinetics. The characteristic features of these subcomponents do not change, but their relative contributions vary, with changes in architecture, fabrication processes, and materials, as well as experimental conditions. The consequential impact on the overall instability is analyzed. The projected instability at the end-of-life (EOL) is determined under different nominal and overclocking usage conditions.
- 5 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. PP  (00189383) , 1-7
Fully Physical BTI Analysis Tool (BAT) for Modeling of NBTI Architecture, Materials, Process, and Dimension Dependence
The fully physical bias temperature instability (BTI) analysis tool (BAT) is utilized to analyze measured negative bias temperature instability (NBTI) in MOSFETs featuring different architectures, gate insulator processes, channel compositions, and dimensions. Stress and recovery time kinetics are modeled at various DC and AC experimental conditions; the instability is decomposed into several physics-based underlying subcomponents, each of them with characteristic stress and recovery time kinetics. The characteristic features of these subcomponents do not change, but their relative contributions vary, with changes in architecture, fabrication processes, and materials, as well as experimental conditions. The consequential impact on the overall instability is analyzed. The projected instability at the end-of-life (EOL) is determined under different nominal and overclocking usage conditions.
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71  (11) , 6499-6505
A Comprehensive Framework for the Self-Heat Enhanced BTI and HCD Isolation
Contributions due to bias temperature instability (BTI) and hot carrier degradation (HCD) in the presence of self-heating (SH) on parametric shift are analyzed in gate-all-around stacked nanosheet (GAA-SNS) p- and n-FETs. The BTI analysis tool (BAT) models the time kinetics of pure BTI during and after stress at different gate bias ( ${V} _{\text {G}}$ ) and temperature (T), and changes in the presence of drain bias ( ${V} _{\text {D}}$ ) due to a reduction in vertical field ( ${E} _{\text {VRT}}$ ) and lattice T increase due to SH. The HCD analysis tool (HCAT) models the time kinetics of pure HCD during and after stress at different ${V} _{\text {G}}$ , ${V} _{\text {D}}$ , and T. The decoupling methodology helps isolate and project BTI and pure HCD contributions to overall HCD at end of life (EOL) at different ${V} _{\text {G}}$ , ${V} _{\text {D}}$ , and T. Comparison is made to blanket HCD projection to EOL without decomposition of BTI.
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71  (11) , 6499-6505
A Comprehensive Framework for the Self-Heat Enhanced BTI and HCD Isolation
Contributions due to bias temperature instability (BTI) and hot carrier degradation (HCD) in the presence of self-heating (SH) on parametric shift are analyzed in gate-all-around stacked nanosheet (GAA-SNS) p- and n-FETs. The BTI analysis tool (BAT) models the time kinetics of pure BTI during and after stress at different gate bias ( ${V} _{\text {G}}$ ) and temperature (T), and changes in the presence of drain bias ( ${V} _{\text {D}}$ ) due to a reduction in vertical field ( ${E} _{\text {VRT}}$ ) and lattice T increase due to SH. The HCD analysis tool (HCAT) models the time kinetics of pure HCD during and after stress at different ${V} _{\text {G}}$ , ${V} _{\text {D}}$ , and T. The decoupling methodology helps isolate and project BTI and pure HCD contributions to overall HCD at end of life (EOL) at different ${V} _{\text {G}}$ , ${V} _{\text {D}}$ , and T. Comparison is made to blanket HCD projection to EOL without decomposition of BTI.
- 25 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45  (12) , 2367-2370
Disturb and its Mitigation in Ferroelectric Field-Effect Transistors With Large Memory Window for NAND Flash Applications
We study the disturb characteristics of ferroelectric field-effect transistors (FEFETs) with band-engineered gate stacks. We demonstrate that integrating a dielectric Al 2 O 3 layer within the ferroelectric (FE) Hf 0.5 Zr 0.5 O 2 layer in the gate stack significantly enhances the memory window (MW), achieving levels suitable for quad-level cell operation (approximately 7.5 V) while operating at a reduced write voltage (below 15 V). Despite these improvements, the band-engineered FEFET exhibits similar pass disturb characteristics in the PGM state as a standard FEFET with an FE-only gate stack. To improve the disturb characteristics, we introduce and validate a periodic refresh-based disturb mitigation scheme, analogous to strategies employed in SSD controllers and flash memory managers for traditional charge trap flash-based NAND chips. This mitigation scheme reduces disturb in the PGM state from ~28% to approximately ~4% in the band-engineered FEFETs, enabling large memory window, lowdisturb operation.
- 25 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45  (12) , 2367-2370
Disturb and its Mitigation in Ferroelectric Field-Effect Transistors With Large Memory Window for NAND Flash Applications
We study the disturb characteristics of ferroelectric field-effect transistors (FEFETs) with band-engineered gate stacks. We demonstrate that integrating a dielectric Al 2 O 3 layer within the ferroelectric (FE) Hf 0.5 Zr 0.5 O 2 layer in the gate stack significantly enhances the memory window (MW), achieving levels suitable for quad-level cell operation (approximately 7.5 V) while operating at a reduced write voltage (below 15 V). Despite these improvements, the band-engineered FEFET exhibits similar pass disturb characteristics in the PGM state as a standard FEFET with an FE-only gate stack. To improve the disturb characteristics, we introduce and validate a periodic refresh-based disturb mitigation scheme, analogous to strategies employed in SSD controllers and flash memory managers for traditional charge trap flash-based NAND chips. This mitigation scheme reduces disturb in the PGM state from ~28% to approximately ~4% in the band-engineered FEFETs, enabling large memory window, lowdisturb operation.
- 2 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71  (1) , 126-137
A Generic Framework for MOSFET Reliability—Part II: Gate and Drain Stress—HCD
The Reaction Diffusion Drift (RDD) model is incorporated in the Sentaurus Technology CAD (TCAD) framework and coupled with carrier and lattice heating to calculate the generation of traps during channel hot carrier stress. The parametric shift due to these generated defects, localized near the drain junction of the device, is calculated under different combinations of gate and drain bias stress. The developed TCAD framework is validated against measured data for devices having varying gate length, oxide thickness, and junction structure. The ability of the framework to reproduce measured time kinetics, gate and drain bias, and temperature dependence is demonstrated. The absence of recovery after hot carrier stress is explained using the stochastic implementation of the same model. A 1-D standalone version of the same model, having identical time kinetics as TCAD, together with the Bias Temperature Instability (BTI) analysis tool discussed in Part I, is used to isolate the BTI and pure Hot Carrier Degradation (HCD) contribution during HCD stress. An equivalent compact model is used for cycle-by-cycle simulation of circuit aging due to HCD in different Ring Oscillator (RO) stages, by using the framework discussed in Part I. The error associated with blanket assignment of AC-to-DC ratio is demonstrated.
- 2 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71  (1) , 126-137
A Generic Framework for MOSFET Reliability—Part II: Gate and Drain Stress—HCD
The Reaction Diffusion Drift (RDD) model is incorporated in the Sentaurus Technology CAD (TCAD) framework and coupled with carrier and lattice heating to calculate the generation of traps during channel hot carrier stress. The parametric shift due to these generated defects, localized near the drain junction of the device, is calculated under different combinations of gate and drain bias stress. The developed TCAD framework is validated against measured data for devices having varying gate length, oxide thickness, and junction structure. The ability of the framework to reproduce measured time kinetics, gate and drain bias, and temperature dependence is demonstrated. The absence of recovery after hot carrier stress is explained using the stochastic implementation of the same model. A 1-D standalone version of the same model, having identical time kinetics as TCAD, together with the Bias Temperature Instability (BTI) analysis tool discussed in Part I, is used to isolate the BTI and pure Hot Carrier Degradation (HCD) contribution during HCD stress. An equivalent compact model is used for cycle-by-cycle simulation of circuit aging due to HCD in different Ring Oscillator (RO) stages, by using the framework discussed in Part I. The error associated with blanket assignment of AC-to-DC ratio is demonstrated.
- 20 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71  (1) , 114-125
A Generic Trap Generation Framework for MOSFET Reliability—Part I: Gate Only Stress–BTI, SILC, and TDDB
The Reaction-Diffusion-Drift model is validated as a trap generation framework during Bias Temperature Instability (BTI), Stress Induced Leakage Current (SILC), and Time Dependent Dielectric Breakdown (TDDB) experiments. The model is implemented in standalone and Technology CAD (TCAD)-based deterministic and standalone stochastic versions. Different implementations show equivalence of the time kinetics of trap generation during stress and trap passivation after stress. The trigger for different type of experiments is introduced via a single reaction parameter. The model is validated against measured data under diverse experimental conditions, either solely, or along with other models to account for additional physical processes. A circuit simulation platform that uses the physical trap generation model is utilized to estimate activity aware aging in logic circuits due to BTI. The error associated with effective AC duty simulation is shown. Implementation and validation for the Hot Carrier Degradation (HCD) is presented in part-II of this article.
- 20 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71  (1) , 114-125
A Generic Trap Generation Framework for MOSFET Reliability—Part I: Gate Only Stress–BTI, SILC, and TDDB
The Reaction-Diffusion-Drift model is validated as a trap generation framework during Bias Temperature Instability (BTI), Stress Induced Leakage Current (SILC), and Time Dependent Dielectric Breakdown (TDDB) experiments. The model is implemented in standalone and Technology CAD (TCAD)-based deterministic and standalone stochastic versions. Different implementations show equivalence of the time kinetics of trap generation during stress and trap passivation after stress. The trigger for different type of experiments is introduced via a single reaction parameter. The model is validated against measured data under diverse experimental conditions, either solely, or along with other models to account for additional physical processes. A circuit simulation platform that uses the physical trap generation model is utilized to estimate activity aware aging in logic circuits due to BTI. The error associated with effective AC duty simulation is shown. Implementation and validation for the Hot Carrier Degradation (HCD) is presented in part-II of this article.
- 3 January 2023
- Published by Elsevier in Solid-State Electronics
- Vol. 201
CARAT – A reliability analysis framework for BTI-HCD aging in circuits
- 3 January 2023
- Published by Elsevier in Solid-State Electronics
- Vol. 201
CARAT – A reliability analysis framework for BTI-HCD aging in circuits
- 13 December 2022
- Published by Elsevier in Solid-State Electronics
- Vol. 202, 108573
A physics-based TCAD framework for NBTI
- 13 December 2022
- Published by Elsevier in Solid-State Electronics
- Vol. 202, 108573
A physics-based TCAD framework for NBTI
- 7 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69  (12) , 6576-6581
Modeling and Analysis of PBTI, and HCD in Presence of Self-Heating in GAA-SNS NFETs
Ultrafast measurements (10- $\mu $ s delay) are done to characterize the time evolution of threshold voltage shift ( $\boldsymbol{\Delta} \textit{V}_{\textit{T}}$ ) due to the positive bias temperature instability (PBTI) and hot carrier degradation (HCD) in gate all around stacked nanosheet (GAA-SNS) N-channel field-effect transistors (NFETs). $\boldsymbol{\Delta} \textit{V}_{\textit{T}}$ time kinetics are analyzed at different gate voltages ( $\textit{V}_{\textit{G}}$ ) and temperatures ( $\textit{T}$ ) during PBTI, and at various $\textit{V}_{\textit{G}}$ /drain voltage ( $\textit{V}_{\textit{D}}$ ) during HCD. PBTI contribution during HCD is estimated with a physics-based BTI analysis tool (BAT) framework in presence of self-heating (SH) and nonuniform vertical field ( $\textit{E}_{\text{VRT}}$ ) covering full $\textit{V}_{\textit{G}}$ / $\textit{V}_{\textit{D}}$ span and intrinsic HCD contribution is decoupled.
- 7 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69  (12) , 6576-6581
Modeling and Analysis of PBTI, and HCD in Presence of Self-Heating in GAA-SNS NFETs
Ultrafast measurements (10- $\mu $ s delay) are done to characterize the time evolution of threshold voltage shift ( $\boldsymbol{\Delta} \textit{V}_{\textit{T}}$ ) due to the positive bias temperature instability (PBTI) and hot carrier degradation (HCD) in gate all around stacked nanosheet (GAA-SNS) N-channel field-effect transistors (NFETs). $\boldsymbol{\Delta} \textit{V}_{\textit{T}}$ time kinetics are analyzed at different gate voltages ( $\textit{V}_{\textit{G}}$ ) and temperatures ( $\textit{T}$ ) during PBTI, and at various $\textit{V}_{\textit{G}}$ /drain voltage ( $\textit{V}_{\textit{D}}$ ) during HCD. PBTI contribution during HCD is estimated with a physics-based BTI analysis tool (BAT) framework in presence of self-heating (SH) and nonuniform vertical field ( $\textit{E}_{\text{VRT}}$ ) covering full $\textit{V}_{\textit{G}}$ / $\textit{V}_{\textit{D}}$ span and intrinsic HCD contribution is decoupled.
- 26 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69  (7) , 3596-3603
Modeling of Classical Channel Hot Electron Degradation in n-MOSFETs Using TCAD
A technology CAD (TCAD) setup is used to calculate the channel hot electron (CHE) induced parametric drift in n-MOSFETs. The setup uses reaction-diffusion-drift model and utilizes carrier energy, vertical electric field, and lattice temperature effects, to calculate the time kinetics of trap generation and its impact on the device parametric drift. Experimental data from published reports, measured using different probes, for midgate bias stress under varying drain bias (~3-8 V) and temperature (0 °C-100 °C) are modeled, in classical devices having different channel lengths (2.0-0.3 μm) and oxide thicknesses (35-5 nm). The impact of device dimension scaling on the spatial distribution of generated traps and their impact on the device parametric drift are discussed.
- 26 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69  (7) , 3596-3603
Modeling of Classical Channel Hot Electron Degradation in n-MOSFETs Using TCAD
A technology CAD (TCAD) setup is used to calculate the channel hot electron (CHE) induced parametric drift in n-MOSFETs. The setup uses reaction-diffusion-drift model and utilizes carrier energy, vertical electric field, and lattice temperature effects, to calculate the time kinetics of trap generation and its impact on the device parametric drift. Experimental data from published reports, measured using different probes, for midgate bias stress under varying drain bias (~3-8 V) and temperature (0 °C-100 °C) are modeled, in classical devices having different channel lengths (2.0-0.3 μm) and oxide thicknesses (35-5 nm). The impact of device dimension scaling on the spatial distribution of generated traps and their impact on the device parametric drift are discussed.
- 12 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69  (7) , 3535-3541
A Method to Isolate Intrinsic HCD and NBTI Contributions Under Self Heating During Varying VG/VD Stress in GAA Nanosheet PFETs
Gate-all-around stacked nano-sheet (GAA-SNS) p-channel field effect transistors (FETs) having varying sheet widths are utilized for ultrafast measurements ($10 ~\mu \text{s}$ delay) of negative bias temperature instability (NBTI) and hot carrier degradation (HCD). The BTI analysis tool (BAT) framework is used to analyze the pure NBTI data at multiple${V}_{G}$ and${T}$ . BAT is suitably modified to estimate the NBTI contribution in the presence of self-heating (SH) effect at multiple${V}_{G}$ and${V}_{D}$ under HCD stress. The pure HCD kinetics is estimated using both empirical and physical models; a vertical field and${T}$ enhanced dominant energy concept is used for the${V}_{G}, {V}_{D}$ , and${T}$ dependence. Projected degradation at end-of-life (EOL) and under multiple${V}_{G} / {V}_{D}$ conditions is estimated.- 12 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69  (7) , 3535-3541
A Method to Isolate Intrinsic HCD and NBTI Contributions Under Self Heating During Varying VG/VD Stress in GAA Nanosheet PFETs
Gate-all-around stacked nano-sheet (GAA-SNS) p-channel field effect transistors (FETs) having varying sheet widths are utilized for ultrafast measurements ($10 ~\mu \text{s}$ delay) of negative bias temperature instability (NBTI) and hot carrier degradation (HCD). The BTI analysis tool (BAT) framework is used to analyze the pure NBTI data at multiple${V}_{G}$ and${T}$ . BAT is suitably modified to estimate the NBTI contribution in the presence of self-heating (SH) effect at multiple${V}_{G}$ and${V}_{D}$ under HCD stress. The pure HCD kinetics is estimated using both empirical and physical models; a vertical field and${T}$ enhanced dominant energy concept is used for the${V}_{G}, {V}_{D}$ , and${T}$ dependence. Projected degradation at end-of-life (EOL) and under multiple${V}_{G} / {V}_{D}$ conditions is estimated.