Jia Kong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jia Kong has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Jiaxing Zhang
Chemical Engineering Research Center, School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China
8 shared publications - Yuefei Wang
Tianjin University
8 shared publications - Rongxin Su
Tianjin University
5 shared publications - Wei Qi
Tianjin University
5 shared publications Yinqiang Xia
4 shared publications- Zhimin He
State Key Laboratory of Chemical Engineering, School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, P. R. China
4 shared publications
Latest Publications
- Top Cited PapersOpen Access
- 31 May 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-17
Preserving fruit freshness with amyloid-like protein coatings
Addressing critical challenges in perishable fruit preservation, including hydrophobic surface treatment, protective layer adhesion on complex cuticles, and synergistic integration of preservation components, here we present an eco-friendly amyloid-like protein coating strategy developed through computer-aided molecular simulation. This system employs phase-transitioned lysozyme as an adhesive layer bonded to fruit epicuticular wax, synergized with sodium alginate and cellulose nanocrystals to form a proteinaceous barrier. Validated across 17 fruit varieties, the coating extends shelf-life by 2-5-fold through microbial inhibition, moisture loss reduction, and rot delay, while maintaining 60–98% nutrient retention, surpassing chemical preservation efficacy without toxicity risks. With edible properties, easy washability, and low cost, the coating demonstrates universal applicability for post-harvest and fresh-cut fruits. Notably, it reduces carbon dioxide emissions by 90% versus refrigeration while achieving 2.5-fold longer shelf-life. These positions the amyloid-like protein coating as a practical and sustainable approach to mitigating global food waste issues.
- 31 May 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-17
Top Cited PapersOpen AccessPreserving fruit freshness with amyloid-like protein coatings
Addressing critical challenges in perishable fruit preservation, including hydrophobic surface treatment, protective layer adhesion on complex cuticles, and synergistic integration of preservation components, here we present an eco-friendly amyloid-like protein coating strategy developed through computer-aided molecular simulation. This system employs phase-transitioned lysozyme as an adhesive layer bonded to fruit epicuticular wax, synergized with sodium alginate and cellulose nanocrystals to form a proteinaceous barrier. Validated across 17 fruit varieties, the coating extends shelf-life by 2-5-fold through microbial inhibition, moisture loss reduction, and rot delay, while maintaining 60–98% nutrient retention, surpassing chemical preservation efficacy without toxicity risks. With edible properties, easy washability, and low cost, the coating demonstrates universal applicability for post-harvest and fresh-cut fruits. Notably, it reduces carbon dioxide emissions by 90% versus refrigeration while achieving 2.5-fold longer shelf-life. These positions the amyloid-like protein coating as a practical and sustainable approach to mitigating global food waste issues.
- 23 July 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (31) , 40531-40542
Bioinspired Three-Component System to Prepare Full-Color Functional Biomimetic Pigments
Nature provides a great source of inspiration for the development of sustainable materials with excellent properties, among which melanin with optical, electronic, and radiation protection properties are considered to be promising coloring materials. However, compared to chemical pigments, the single color, complex oxidation process, and poor solubility of natural melanin strongly limit their further applications. Here, we introduce a series of melanin-like polymeric pigments with amino acid-encoded physicochemical properties by a simple three-component reaction system. Our protocol enables artificial control of the chromophore structures through the rational design of the substrates and dopants, thereby combining the safety and functionality of biopigments with the color richness of chemical dyes. Similar to the photoprotective effect of natural melanin, the polymeric pigments showed excellent antioxidant activity in reducing free radicals and have the advantages of iridescent color, strong tinting strength, stability, and affordability. Furthermore, due to their ability to dye substrates, these biomimetic are expected to become new low-cost bioactive chromophores and find various biochemical applications such as in clothing and hair dyeing, food addition, and anticounterfeiting detection.
- 23 July 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (31) , 40531-40542
Bioinspired Three-Component System to Prepare Full-Color Functional Biomimetic Pigments
Nature provides a great source of inspiration for the development of sustainable materials with excellent properties, among which melanin with optical, electronic, and radiation protection properties are considered to be promising coloring materials. However, compared to chemical pigments, the single color, complex oxidation process, and poor solubility of natural melanin strongly limit their further applications. Here, we introduce a series of melanin-like polymeric pigments with amino acid-encoded physicochemical properties by a simple three-component reaction system. Our protocol enables artificial control of the chromophore structures through the rational design of the substrates and dopants, thereby combining the safety and functionality of biopigments with the color richness of chemical dyes. Similar to the photoprotective effect of natural melanin, the polymeric pigments showed excellent antioxidant activity in reducing free radicals and have the advantages of iridescent color, strong tinting strength, stability, and affordability. Furthermore, due to their ability to dye substrates, these biomimetic are expected to become new low-cost bioactive chromophores and find various biochemical applications such as in clothing and hair dyeing, food addition, and anticounterfeiting detection.
- 10 May 2023
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 95 (21) , 8284-8290
Rethreading Design of Ratiometric roGFP2 Mimetic Peptide for Hydrogen Peroxide Sensing
Reconstruction of the miniaturized peptide to mimic the tailored functions of protein has been attractive but challenging. Herein, initialized from the crystal structure of redox-sensitive green fluorescent protein-2 (roGFP2), we propose a practical approach to construct the roGFP2 mimetic peptide by rethreading the aromatic residues adjacent to the chromophore fragment. By fine-tuning the residues of peptides, a mini tetrapeptide (Cys-Phe-Phe-His) was designed, which can act as a hydrogen peroxide sensor using its ratiometric fluorescence. The roGFP2 mimetic tetrapeptide is biocompatible and photostable and has competitive fluorescent properties with roGFP2 by the virtue of its assembly induced emissions. We expand the ratiometric tetrapeptide for sensing hydrogen peroxide in acidic chambers. The results provide a promising approach for the artificial design of miniaturized peptides with the desired function.
- 10 May 2023
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 95 (21) , 8284-8290
Rethreading Design of Ratiometric roGFP2 Mimetic Peptide for Hydrogen Peroxide Sensing
Reconstruction of the miniaturized peptide to mimic the tailored functions of protein has been attractive but challenging. Herein, initialized from the crystal structure of redox-sensitive green fluorescent protein-2 (roGFP2), we propose a practical approach to construct the roGFP2 mimetic peptide by rethreading the aromatic residues adjacent to the chromophore fragment. By fine-tuning the residues of peptides, a mini tetrapeptide (Cys-Phe-Phe-His) was designed, which can act as a hydrogen peroxide sensor using its ratiometric fluorescence. The roGFP2 mimetic tetrapeptide is biocompatible and photostable and has competitive fluorescent properties with roGFP2 by the virtue of its assembly induced emissions. We expand the ratiometric tetrapeptide for sensing hydrogen peroxide in acidic chambers. The results provide a promising approach for the artificial design of miniaturized peptides with the desired function.
- 9 March 2023
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 95 (11) , 5053-5060
Quantitative Ratiometric Biosensors Based on Fluorescent Ferrocene-Modified Histidine Dipeptide Nanoassemblies
Fluorescent proteins (FPs) provide a ratiometric readout for quantitative assessment of the destination of internalized biomolecules. FP-inspired peptide nanostructures that can compete with FPs in their capacity are the most preferred building blocks for the synthesis of fluorescent soft matter. However, realizing a ratiometric emission from a single peptide fluorophore remains exclusive since multicolor emission is a rare property in peptide nanostructures. Here, we describe a bioinspired peptidyl platform for ratiometric intracellular quantitation by employing a single ferrocene-modified histidine dipeptide. The intensiometric ratio of green to blue fluorescence correlates linearly with the concentration of the peptide by three orders of magnitude. The ratiometric fluorescence of the peptide is an assembly-induced emission originating from hydrogen bonds and aromatic interactions. Additionally, modular design enables ferrocene-modified histidine dipeptides to use as a general platform for the construction of intricate peptides that retain the ratiometric fluorescent properties. The ratiometric peptide technique promises flexibility in the design of a wide spectrum of stoichiometric biosensors for quantitatively understanding the trafficking and subcellular fate of biomolecules.
- 9 March 2023
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 95 (11) , 5053-5060
Quantitative Ratiometric Biosensors Based on Fluorescent Ferrocene-Modified Histidine Dipeptide Nanoassemblies
Fluorescent proteins (FPs) provide a ratiometric readout for quantitative assessment of the destination of internalized biomolecules. FP-inspired peptide nanostructures that can compete with FPs in their capacity are the most preferred building blocks for the synthesis of fluorescent soft matter. However, realizing a ratiometric emission from a single peptide fluorophore remains exclusive since multicolor emission is a rare property in peptide nanostructures. Here, we describe a bioinspired peptidyl platform for ratiometric intracellular quantitation by employing a single ferrocene-modified histidine dipeptide. The intensiometric ratio of green to blue fluorescence correlates linearly with the concentration of the peptide by three orders of magnitude. The ratiometric fluorescence of the peptide is an assembly-induced emission originating from hydrogen bonds and aromatic interactions. Additionally, modular design enables ferrocene-modified histidine dipeptides to use as a general platform for the construction of intricate peptides that retain the ratiometric fluorescent properties. The ratiometric peptide technique promises flexibility in the design of a wide spectrum of stoichiometric biosensors for quantitatively understanding the trafficking and subcellular fate of biomolecules.
Color‐Tunable Fluorescent Hierarchical Nanoassemblies with Concentration‐Encoded Emission
Cephalopods possess a dynamic coloration behavior to change their iridescence due to the concentration‐induced optical properties of chromatophores and hierarchical assembly of reflectin. However, cephalopods rarely have iridescence in the darkfield. It would be interesting to develop color‐tunable fluorescent hierarchical nanoassemblies with concentration‐encoded emission. Herein, to construct the bioavailable fluorophore with dynamic coloration properties, a histidine‐rich peptide is designed, which can self‐assemble into hierarchical nanoassemblies stabilized by hydrogen bonds and π–π stacking interactions. The peptidyl nanoassemblies emit fluorescent iridescence, encompassing the blue to orange region due to the assembly‐induced emission. The fluorescence of histidine‐rich peptides is color‐tunable and reversible, which can be dynamically controlled in a concentration‐encoded mode. Due to the coloration ability of histidine‐rich peptides, fluorescent polychromatic human cells are developed, highlighting its potential role as a fluorescent candidate for future applications such as bioimaging, implantable light‐emitting diodes, and photochromic camouflage.
Color‐Tunable Fluorescent Hierarchical Nanoassemblies with Concentration‐Encoded Emission
Cephalopods possess a dynamic coloration behavior to change their iridescence due to the concentration‐induced optical properties of chromatophores and hierarchical assembly of reflectin. However, cephalopods rarely have iridescence in the darkfield. It would be interesting to develop color‐tunable fluorescent hierarchical nanoassemblies with concentration‐encoded emission. Herein, to construct the bioavailable fluorophore with dynamic coloration properties, a histidine‐rich peptide is designed, which can self‐assemble into hierarchical nanoassemblies stabilized by hydrogen bonds and π–π stacking interactions. The peptidyl nanoassemblies emit fluorescent iridescence, encompassing the blue to orange region due to the assembly‐induced emission. The fluorescence of histidine‐rich peptides is color‐tunable and reversible, which can be dynamically controlled in a concentration‐encoded mode. Due to the coloration ability of histidine‐rich peptides, fluorescent polychromatic human cells are developed, highlighting its potential role as a fluorescent candidate for future applications such as bioimaging, implantable light‐emitting diodes, and photochromic camouflage.
- Open Access
The Safety of Cold-Chain Food in Post-COVID-19 Pandemic: Precaution and Quarantine
Since the outbreak of coronavirus disease-19 (COVID-19), cold-chain food contamination caused by the pathogenic severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has attracted huge concern. Cold-chain foods provide a congenial environment for SARS-CoV-2 survival, which presents a potential risk for public health. Strengthening the SARS-CoV-2 supervision of cold-chain foods has become the top priority in many countries. Methodologically, the potential safety risks and precaution measures of SARS-CoV-2 contamination on cold-chain food are analyzed. To ensure the safety of cold-chain foods, the advances in SARS-CoV-2 detection strategies are summarized based on technical principles and target biomarkers. In particular, the techniques suitable for SARS-CoV-2 detection in a cold-chain environment are discussed. Although many quarantine techniques are available, the field-based quarantine technique on cold-chain food with characteristics of real-time, sensitive, specific, portable, and large-scale application is urgently needed.
Open AccessThe Safety of Cold-Chain Food in Post-COVID-19 Pandemic: Precaution and Quarantine
Since the outbreak of coronavirus disease-19 (COVID-19), cold-chain food contamination caused by the pathogenic severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has attracted huge concern. Cold-chain foods provide a congenial environment for SARS-CoV-2 survival, which presents a potential risk for public health. Strengthening the SARS-CoV-2 supervision of cold-chain foods has become the top priority in many countries. Methodologically, the potential safety risks and precaution measures of SARS-CoV-2 contamination on cold-chain food are analyzed. To ensure the safety of cold-chain foods, the advances in SARS-CoV-2 detection strategies are summarized based on technical principles and target biomarkers. In particular, the techniques suitable for SARS-CoV-2 detection in a cold-chain environment are discussed. Although many quarantine techniques are available, the field-based quarantine technique on cold-chain food with characteristics of real-time, sensitive, specific, portable, and large-scale application is urgently needed.
- Open Access
- 26 September 2018
- Published by Wiley in Angewandte Chemie
- Vol. 130 (43) , 14134
Innentitelbild: Rationally Designed Peptidyl Virus‐Like Particles Enable Targeted Delivery of Genetic Cargo (Angew. Chem. 43/2018)
- 26 September 2018
- Published by Wiley in Angewandte Chemie
- Vol. 130 (43) , 14134
Open AccessInnentitelbild: Rationally Designed Peptidyl Virus‐Like Particles Enable Targeted Delivery of Genetic Cargo (Angew. Chem. 43/2018)
- Open Access
- 26 September 2018
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 57 (43) , 13938
Inside Cover: Rationally Designed Peptidyl Virus‐Like Particles Enable Targeted Delivery of Genetic Cargo (Angew. Chem. Int. Ed. 43/2018)
- 26 September 2018
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 57 (43) , 13938
Open AccessInside Cover: Rationally Designed Peptidyl Virus‐Like Particles Enable Targeted Delivery of Genetic Cargo (Angew. Chem. Int. Ed. 43/2018)
- 21 August 2018
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 57 (43) , 14032-14036
Rationally Designed Peptidyl Virus‐Like Particles Enable Targeted Delivery of Genetic Cargo
We report a strategy to construct peptidyl virus‐like particles (pVLPs) by mimicking the human immunodeficiency virus and simian virus 40. We designed two viral peptides with cell/nucleus‐targeting capabilities that can co‐assemble in their active conformations into well‐defined nanoparticles. The self‐assembled nanoparticles can encapsulate the DNA of clustered regularly interspaced short palindromic repeat associated proteins 9 (CRISPR/Cas9) to form biodegradable pVLPs with excellent cell‐targeting ability and biocompatibility. The pVLPs can penetrate the cellular membrane and deliver genetic cargos into the nucleus through the viral entry route. The results provide a promising pathway for engineering artificial viruses with desired functions.
- 21 August 2018
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 57 (43) , 14032-14036
Rationally Designed Peptidyl Virus‐Like Particles Enable Targeted Delivery of Genetic Cargo
We report a strategy to construct peptidyl virus‐like particles (pVLPs) by mimicking the human immunodeficiency virus and simian virus 40. We designed two viral peptides with cell/nucleus‐targeting capabilities that can co‐assemble in their active conformations into well‐defined nanoparticles. The self‐assembled nanoparticles can encapsulate the DNA of clustered regularly interspaced short palindromic repeat associated proteins 9 (CRISPR/Cas9) to form biodegradable pVLPs with excellent cell‐targeting ability and biocompatibility. The pVLPs can penetrate the cellular membrane and deliver genetic cargos into the nucleus through the viral entry route. The results provide a promising pathway for engineering artificial viruses with desired functions.