Pachalapalli Dinesh Sankar Reddy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Pachalapalli Dinesh Sankar Reddy has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
Harshitha Seenivasan
School of Biosciences and Technology, Vellore Institute of Technology, Vellore, Tamil Nadu 632014, India
2 shared publicationsSathieesh Sounderarajan
Department of Chemical Engineering, National Institute of Technology Andhra Pradesh, Tadepalligudem, Andhra Pradesh 534101, India; Biochemical Engineering Research Group, Department of Biotechnology, National Institute of Technology Andhra Pradesh, Tadepalligudem, Andhra Pradesh 534101, India
2 shared publications- Seenivasan Ayothiraman
Department of Biotechnology, National Institute of Technology Andhra Pradesh, Tadepalligudem, India
2 shared publications Aafreen Periyar Vikram Surya
Department of Biotechnology, Bharathidasan University, Palkalaiperur, Tiruchirappalli, Tamil Nadu 620024, India
1 shared publicationAbdul Ashraf
Department of Mechanical Engineering
1 shared publication- Balakrishnan Deepanraj
Department of Mechanical Engineering, College of Engineering, Prince Mohammad Bin Fahd University, Al Khobar, Saudi Arabia
1 shared publication
Latest Publications
- Open Access
- 27 June 2025
- Published by Oriental Scientific Publishing Company in Biosciences Biotechnology Research Asia
- Vol. 22 (2) , 733-745
GCMS Analysis of Anti-Diabetic and Antioxidant Metabolites from PENICILLIUM Javanicum NZ JNTU
The most promising sources of possible secondary metabolites with biological and pharmacological characteristics are fungi. Biological uses of soil fungus are less studied than those of marine and endophytic fungi. The soil fungus Penicillium javanicum was isolated and examined for antioxidant and anti-diabetic properties in the current study. Optimal growing conditions were used to develop the fungus on a wide scale, and serial solvent extraction was used to extract the crude metabolites. Amid P. javanicum extracts ethyl acetate extract presented the highest anti-diabetic activity conforming to 73.24% α-amylase inhibition activity at 400µg/ml to IC50 value of 261.52µg/ml compared to 15.47µg/ml of standard Acarbose. Chloroform extract of P. javanicum inhibited 53.33% amylase activity in contrast to 24.94% and 8.69% anti-diabetic activity of 400µg/ml of ethanol and petroleum ether extracts. Further, ethyl acetate extract evaluated for free radical scavenging potential indicated 70.14% antioxidant activity at 300µg/ml with IC50 value of IC50 value of 166.17µg/ml. The secondary metabolites of P. javanicum in all the extracts analyzed by Gas Chromatography Mass Spectroscopy (GCMS) revealed three dominant peaks corresponded to 1-Hexadecanol, 9,12-Octadecadienoyl chloride, (Z,Z)-, and 2-Methyl-1-undecanol in the ethyl acetate extract. Whereas, chloroform and ethanol extracts contained 17-Octadecynoic acid and Z,Z-3,13-Octadecedien-1-ol along Nonadecane respectively as dominant metabolites. These metabolites have been reported for antimicrobial, anti-inflammatory, antioxidant, anti-malignancy activities, and biocontrol agents against plant pathogens. However, the anti-diabetic and antioxidant activity of metabolites of P. javanicum are scarce and being reported for the first time in the present study. The biological activities of secondary metabolites of P. javanicum reported currently are other than soil fungi such as plants and other sources. Hence there is a huge scope to study these metabolites exclusively to discover a novel anti-diabetic drug.
- 27 June 2025
- Published by Oriental Scientific Publishing Company in Biosciences Biotechnology Research Asia
- Vol. 22 (2) , 733-745
Open AccessGCMS Analysis of Anti-Diabetic and Antioxidant Metabolites from PENICILLIUM Javanicum NZ JNTU
The most promising sources of possible secondary metabolites with biological and pharmacological characteristics are fungi. Biological uses of soil fungus are less studied than those of marine and endophytic fungi. The soil fungus Penicillium javanicum was isolated and examined for antioxidant and anti-diabetic properties in the current study. Optimal growing conditions were used to develop the fungus on a wide scale, and serial solvent extraction was used to extract the crude metabolites. Amid P. javanicum extracts ethyl acetate extract presented the highest anti-diabetic activity conforming to 73.24% α-amylase inhibition activity at 400µg/ml to IC50 value of 261.52µg/ml compared to 15.47µg/ml of standard Acarbose. Chloroform extract of P. javanicum inhibited 53.33% amylase activity in contrast to 24.94% and 8.69% anti-diabetic activity of 400µg/ml of ethanol and petroleum ether extracts. Further, ethyl acetate extract evaluated for free radical scavenging potential indicated 70.14% antioxidant activity at 300µg/ml with IC50 value of IC50 value of 166.17µg/ml. The secondary metabolites of P. javanicum in all the extracts analyzed by Gas Chromatography Mass Spectroscopy (GCMS) revealed three dominant peaks corresponded to 1-Hexadecanol, 9,12-Octadecadienoyl chloride, (Z,Z)-, and 2-Methyl-1-undecanol in the ethyl acetate extract. Whereas, chloroform and ethanol extracts contained 17-Octadecynoic acid and Z,Z-3,13-Octadecedien-1-ol along Nonadecane respectively as dominant metabolites. These metabolites have been reported for antimicrobial, anti-inflammatory, antioxidant, anti-malignancy activities, and biocontrol agents against plant pathogens. However, the anti-diabetic and antioxidant activity of metabolites of P. javanicum are scarce and being reported for the first time in the present study. The biological activities of secondary metabolites of P. javanicum reported currently are other than soil fungi such as plants and other sources. Hence there is a huge scope to study these metabolites exclusively to discover a novel anti-diabetic drug.
- 27 February 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 306 (Pt 2) , 141555
Design strategies for novel esterase purification processes from Trichoderma harzianum-An insight into kinetic and thermodynamic analyses
- 27 February 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 306 (Pt 2) , 141555
Design strategies for novel esterase purification processes from Trichoderma harzianum-An insight into kinetic and thermodynamic analyses
- 27 July 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 277 (Pt 2) , 134133
Selective recovery of esterase from Trichoderma harzianum through adsorption: Insights on enzymatic catalysis, adsorption isotherms and kinetics
- 27 July 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 277 (Pt 2) , 134133
Selective recovery of esterase from Trichoderma harzianum through adsorption: Insights on enzymatic catalysis, adsorption isotherms and kinetics
- 6 October 2022
- Published by Springer Nature
- p. 429-438
Preparation of Cellulose Nanofibers (CNFs) from Cajanus cajan (Pigeon Pea) and Acacia arabica (Babul Plant)
- 6 October 2022
- Published by Springer Nature
- p. 429-438
Preparation of Cellulose Nanofibers (CNFs) from Cajanus cajan (Pigeon Pea) and Acacia arabica (Babul Plant)
- Open Access
- 19 September 2022
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 34 (10) , 2597-2603
Comparative Adsorbent Studies using Pyrolyzed Materials Prepared from Custard Apple (Annona squamosa) Leaves in Removal of Fluoride from Wastewater
Pyrolyzed materials (biochar) obtained from the leaves of custard apple (Annona squamosa) at 800 ºC in open air (OPA) and in presence of inert gas (IGPA) were used as adsorbent materials. The effect of different parameters such as particle size, agitation speed, pH, contact time, adsorbent dosage, initial fluoride concentration and temperature on fluorine adsorption on Annona squamosa as the adsorbent has been investigated. At pH 7, the optimized factors were contact period (30 min), the agitation speed (500 rpm) and the adsorbent dosage (1.5 g per 50 mL of fluoride water). A maximum fluoride removal efficiency of 93% in the case of OPA and 96% in the case of IGPA was achieved. Adsorption isotherm modeling studies show that the adsorption onto OPA followed Dubinin-Raudskevitch isotherm model,whereas IGPA followed Langmuir isotherm model, respectively. Thermodynamic parameters such as ΔHº, ΔGº and ΔSº were also estimated to ascertain the reaction is endothermic. In case of kinetics, pseudo-second order is the best fit for both OPA and IGPA. The SEM, FTIR and XRD patterns of the adsorbents were also recorded to have a greater comprehension of the adsorption process mechanism.
- 19 September 2022
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 34 (10) , 2597-2603
Open AccessComparative Adsorbent Studies using Pyrolyzed Materials Prepared from Custard Apple (Annona squamosa) Leaves in Removal of Fluoride from Wastewater
Pyrolyzed materials (biochar) obtained from the leaves of custard apple (Annona squamosa) at 800 ºC in open air (OPA) and in presence of inert gas (IGPA) were used as adsorbent materials. The effect of different parameters such as particle size, agitation speed, pH, contact time, adsorbent dosage, initial fluoride concentration and temperature on fluorine adsorption on Annona squamosa as the adsorbent has been investigated. At pH 7, the optimized factors were contact period (30 min), the agitation speed (500 rpm) and the adsorbent dosage (1.5 g per 50 mL of fluoride water). A maximum fluoride removal efficiency of 93% in the case of OPA and 96% in the case of IGPA was achieved. Adsorption isotherm modeling studies show that the adsorption onto OPA followed Dubinin-Raudskevitch isotherm model,whereas IGPA followed Langmuir isotherm model, respectively. Thermodynamic parameters such as ΔHº, ΔGº and ΔSº were also estimated to ascertain the reaction is endothermic. In case of kinetics, pseudo-second order is the best fit for both OPA and IGPA. The SEM, FTIR and XRD patterns of the adsorbents were also recorded to have a greater comprehension of the adsorption process mechanism.
- Open Access
- 1 January 2022
- Published by Wiley in Journal of Nanomaterials
- Vol. 2022 (1)
Numerical Study on the Thermal Enhancement of Phase Change Material with the Addition of Nanoparticles and Changing the Orientation of the Enclosure
The global demand of the heating and cooling applications gives a larger potential to study the thermal energy storage system. Phase change materials (PCM) that are used to charge, store, and discharge the heat energy are inferior in heat transfer characteristics. The properties of PCM can be improved by adding nanoparticles, changing the orientation of the enclosure or both. Two‐dimensional transient numerical analysis on the effect of Grashoff number (5000, 13000, and 20000), nanoparticle type (Al2O3, CuO, and MWCNT), and volume concentration (0%, 1%, 3%, and 5%) added in RT 42 PCM and orientation of square enclosure (30, 45, and 60°) to enhance the heat transfer rate is carried out. The thermophysical properties of the nano‐PCM are evaluated and presented. From the results, it is affirmed that the melt fraction of the PCM rises with the increase in Gr and volume concentration of the nanoparticles up to an optimum level. The MWCNT‐based nano‐PCM attained a larger portion of melt fraction followed by Al2O3, CuO, and pure PCM. It is noted that an orientation of 60° and 45° will convert more quantities of pure PCM and nano‐PCM into liquid fraction, respectively. The (3% MWCNT/RT‐42 PCM) filled in 45° oriented container attained the highest melt fraction by 3.4%, 2.04%, and 2.94% than (3% Al2O3/RT‐42 PCM), (1%CuO/RT‐42 PCM), and pure PCM. The variation in the maximum melt fraction of the nanomaterial is because of the change in thermophysical characteristics of the nano‐PCM.
- 1 January 2022
- Published by Wiley in Journal of Nanomaterials
- Vol. 2022 (1)
Open AccessNumerical Study on the Thermal Enhancement of Phase Change Material with the Addition of Nanoparticles and Changing the Orientation of the Enclosure
The global demand of the heating and cooling applications gives a larger potential to study the thermal energy storage system. Phase change materials (PCM) that are used to charge, store, and discharge the heat energy are inferior in heat transfer characteristics. The properties of PCM can be improved by adding nanoparticles, changing the orientation of the enclosure or both. Two‐dimensional transient numerical analysis on the effect of Grashoff number (5000, 13000, and 20000), nanoparticle type (Al2O3, CuO, and MWCNT), and volume concentration (0%, 1%, 3%, and 5%) added in RT 42 PCM and orientation of square enclosure (30, 45, and 60°) to enhance the heat transfer rate is carried out. The thermophysical properties of the nano‐PCM are evaluated and presented. From the results, it is affirmed that the melt fraction of the PCM rises with the increase in Gr and volume concentration of the nanoparticles up to an optimum level. The MWCNT‐based nano‐PCM attained a larger portion of melt fraction followed by Al2O3, CuO, and pure PCM. It is noted that an orientation of 60° and 45° will convert more quantities of pure PCM and nano‐PCM into liquid fraction, respectively. The (3% MWCNT/RT‐42 PCM) filled in 45° oriented container attained the highest melt fraction by 3.4%, 2.04%, and 2.94% than (3% Al2O3/RT‐42 PCM), (1%CuO/RT‐42 PCM), and pure PCM. The variation in the maximum melt fraction of the nanomaterial is because of the change in thermophysical characteristics of the nano‐PCM.
- Open Access
- 24 October 2018
- Published by Oriental Scientific Publishing Company in Biosciences Biotechnology Research Asia
- Vol. 15 (4) , 783-790
Role of Green Route Synthesized Silver Nanoparticles in Medicinal Applications with Special Reference to Cancer Therapy
Nanotechnology is a blazing field for the researchers in modern branch of science along with engineering have lot of applications. Nanotechnology is an imminent field with new outlet to fight and prevent many diseases using nanoparticles. Among the most promising materials Silver nanoparticles are having antimicrobial properties which are synthesized from medicinal plant and acts against chronic diseases. Silver nanoparticles synthesized from medicinal plants have lot of applications and eco-friendly, cost effective in nature. The present review article mainly focuses on biologically synthesized silver nanoparticles from medicinal plants and its role on cancer cells. Cancer is one of the most difficult health issues on globe. Although number of treatments may include radiation, chemotherapy and surgery, but these procedures not only targets tumor tissue but also normal healthy tissue. In recent years silver nanoparticles are considered as promising tool for cancer therapy. A numerous studies both in-vitro and in-vivo suggested that sliver nanoparticles can be used as cytotoxic and genotoxic agent due to their apoptotic inducing and anti-proliferative properties. However there is need to overlook the mechanism regarding the anti-cancerous activity. A silver nanoparticle deploys in every field of engineering science and medical sciences are still attracting to explore new scope of nanobiotechnology attributed with smaller size particles.
- 24 October 2018
- Published by Oriental Scientific Publishing Company in Biosciences Biotechnology Research Asia
- Vol. 15 (4) , 783-790
Open AccessRole of Green Route Synthesized Silver Nanoparticles in Medicinal Applications with Special Reference to Cancer Therapy
Nanotechnology is a blazing field for the researchers in modern branch of science along with engineering have lot of applications. Nanotechnology is an imminent field with new outlet to fight and prevent many diseases using nanoparticles. Among the most promising materials Silver nanoparticles are having antimicrobial properties which are synthesized from medicinal plant and acts against chronic diseases. Silver nanoparticles synthesized from medicinal plants have lot of applications and eco-friendly, cost effective in nature. The present review article mainly focuses on biologically synthesized silver nanoparticles from medicinal plants and its role on cancer cells. Cancer is one of the most difficult health issues on globe. Although number of treatments may include radiation, chemotherapy and surgery, but these procedures not only targets tumor tissue but also normal healthy tissue. In recent years silver nanoparticles are considered as promising tool for cancer therapy. A numerous studies both in-vitro and in-vivo suggested that sliver nanoparticles can be used as cytotoxic and genotoxic agent due to their apoptotic inducing and anti-proliferative properties. However there is need to overlook the mechanism regarding the anti-cancerous activity. A silver nanoparticle deploys in every field of engineering science and medical sciences are still attracting to explore new scope of nanobiotechnology attributed with smaller size particles.