FDFabrice Donatini

Fabrice Donatini

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Fabrice Donatini has a total of 93 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Surface excitons in ZnO nanowires grown by chemical bath deposition following hydrogen passivation

    by Emilien Lefebvre, Fabrice Donatini, Saïd Hassani, Sonia Ortega Murillo, Isabelle Gélard, Vincent Sallet, Estelle Appert, Vincent Consonni

  • Open Access

    Tunable Hydrogen-Related Defects in ZnO Nanowires Using Oxygen Plasma Treatment by Ion Energy Adjustment

    by Alexandre Dieulesaint, Odette Chaix-Pluchery, Matthieu Weber, Fabrice Donatini, Ana Lacoste, Vincent Consonni, Eirini Sarigiannidou

    The chemical bath deposition (CBD) process enables the deposition of ZnO nanowires (NWs) on various substrates with customizable morphology. However, the hydrogen-rich CBD environment introduces numerous hydrogen-related defects, unintentionally doping the ZnO NWs and increasing their electrical conductivity. The oxygen-based plasma treatment can modify the nature and amount of these defects, potentially tailoring the ZnO NW properties for specific applications. This study examines the impact of the average ion energy on the formation of oxygen vacancies (VO) and hydrogen-related defects in ZnO NWs exposed to low-pressure oxygen plasma. Using X-ray photoelectron spectroscopy (XPS), 5 K cathodoluminescence (5K CL), and Raman spectroscopy, a comprehensive understanding of the effect of the oxygen ion energy on the formation of defects and defect complexes was established. A series of associative and dissociative reactions indicated that controlling plasma process parameters, particularly ion energy, is crucial. The XPS data suggested that increasing the ion energy could enhance Fermi level pinning by increasing the amount of VO and favoring the hydroxyl group adsorption, expanding the depletion region of charge carriers. The 5K CL and Raman spectroscopy further demonstrated the potential to adjust the ZnO NW physical properties by varying the oxygen ion energy, affecting various donor- and acceptor-type defect complexes. This study highlights the ability to tune the ZnO NW properties at low temperature by modifying plasma process parameters, offering new possibilities for a wide variety of nanoscale engineering devices fabricated on flexible and/or transparent substrates.


  • Controlled boron content in lightly B-doped single crystal diamond films by variation of methane concentration

    by Rozita Rouzbahani, Paulius Pobedinskas, Fabrice Donatini, Deniz Wong, Julien Pernot, Ken Haenen


  • Heteroepitaxy of Scandium Delafossite on ZnO

    by Stéphane Grenier, Fabrice Donatini, Eric Mossang, Pierre Muret

    The trigonal polytypes of the delafossites ScCuO and ScMgCuO, which are p‐type semiconductors, are elaborated by pulse laser deposition and epitaxially grown on the oxygen‐terminated (00) ZnO surface along their same basal plane with an absolute mismatch less than 0.5%. Depending on the Mg content x and excess intercalated oxygen δ, the relative mismatch can be either positive or negative, but very close to zero in any cases. Optically excited transitions between valence band and conduction band states detected from spectroscopic ellipsometry and cathodoluminescence spectrum confirm the band structure calculated theoretically by several authors. The deviation between fundamental optical absorption and exciton radiative recombination yields an exciton binding energy of 0.2 eV. From infrared optical absorption of free carriers, a hole concentration of 6 × 1021 cm−3 is deduced.

  • Study of AlxGa1-xN/AlN quantum dots in the whole compositional range as potential sources of far UVC for disinfection

    by Anjali Harikumar, Fabrice Donatini, Edith Bellet-Amalric, Catherine Bougerol, Christophe Dujardin, Stephen T. Purcell, Eva Monroy

    Recently, there has been an increased interest in germicidal ultraviolet (GUV) lamps for disinfection. Despite extensive studies on GUV LEDs, their efficiency and cost per Watt is still far from that of mercury lamps due to electrical injection issues, among others. Also, the fact that 254 nm radiation is highly carcinogenic and cataractogenic, has motivated research on radiation with shorter penetration (200-230 nm) depth, for non-invasive disinfection. In this study, we propose electron pumped UV lamps as an alternative to LEDs (to tackle electrical issues) in the spectral range 230-330 targeting both wavelength ranges of disinfection and exhibiting IQE ranging from 20%-50%.

  • Open Access

    Optimization of the Sb2S3 Shell Thickness in ZnO Nanowire-Based Extremely Thin Absorber Solar Cells

    by Guislain Hector, Jako S. Eensalu, Atanas Katerski, Hervé Roussel, Odette Chaix-Pluchery, Estelle Appert, Fabrice Donatini, Ilona Oja Acik, Erki Kärber, Vincent Consonni

    Extremely thin absorber (ETA) solar cells made of ZnO/TiO2/Sb2S3 core–shell nanowire heterostructures, using P3HT as the hole-transporting material (HTM), are of high interest to surpass solar cell efficiencies of their planar counterpart at lower material cost. However, no dimensional optimization has been addressed in detail, as it raises material and technological critical issues. In this study, the thickness of the Sb2S3 shell grown by chemical spray pyrolysis is tuned from a couple of nanometers to several tens of nanometers, while switching from a partially to a fully crystallized shell. The Sb2S3 shell is highly pure, and the unwanted Sb2O3 phase was not formed. The low end of the thickness is limited by challenges in the crystallization of the Sb2S3 shell, as it is amorphous at nanoscale dimensions, resulting in the low optical absorption of visible photons. In contrast, the high end of the thickness is limited by the increased density of defects in the bulk of the Sb2S3 shell, degrading charge carrier dynamics, and by the incomplete immersion of the P3HT in the structure, resulting in the poor hole collection. The best ETA solar cell with a short-circuit current density of 12.1 mA/cm2, an open-circuit voltage of 502 mV, and a photovoltaic conversion efficiency of 2.83% is obtained for an intermediate thickness of the Sb2S3 shell. These findings highlight that the incorporation of both the absorber shell and HTM in the core–shell heterostructures relies on the spacing between individual nanowires. They further elaborate the intricate nature of the dimensional optimization of an ETA cell, as it requires a fine-balanced holistic approach to correlate all the dimensions of all the components in the heterostructures.


  • Highly doped AlN nanowire pn junction: a step towards a new generation of UV-C LEDs

    by Rémy Vermeersch, Alexandra-Madalina Siladie, Gwénolé Jacopin, Ana Cros, Nuria Garro, Eric Robin, Damien Caliste, Pascal Pochet, Fabrice Donatini, Julien Pernot, et al.

    SPIE Digital Library Proceedings


  • Growth of zinc-blende GaN on muscovite mica by molecular beam epitaxy

    by Bruno Daudin, Fabrice Donatini, Catherine Bougerol, Bruno Gayral, Edith Bellet-Amalric, Rémy Vermeersch, Nathaniel Feldberg, Jean-Luc Rouvière, Maria José Recio Carretero, Núria Garro, et al.

    The mechanisms of plasma-assisted molecular beam epitaxial growth of GaN on muscovite mica were investigated. Using a battery of techniques, including scanning and transmission electron microscopy, atomic force microscopy, cathodoluminescence, Raman spectroscopy and x-ray diffraction, it was possible to establish that, in spite of the lattice symmetry mismatch, GaN grows in epitaxial relationship with mica, with the [11–20] GaN direction parallel to [010] direction of mica. GaN layers could be easily detached from the substrate via the delamination of the upper layers of the mica itself, discarding the hypothesis of a van der Waals growth mode. Mixture of wurtzite (hexagonal) and zinc blende (ZB) (cubic) crystallographic phases was found in the GaN layers with ratios highly dependent on the growth conditions. Interestingly, almost pure ZB GaN epitaxial layers could be obtained at high growth temperature, suggesting the existence of a specific GaN nucleation mechanism on mica and opening a new way to the growth of the thermodynamically less stable ZB GaN phase.


  • Internal quantum efficiency of AlGaN/AlN quantum dot superlattices for electron-pumped ultraviolet sources

    by A Harikumar, F Donatini, C Bougerol, E Bellet-Amalric, Q -M Thai, C Dujardin, I Dimkou, S T Purcell, E Monroy

    In this paper, we describe the growth and characterization of ≈530 nm thick superlattices (100 periods) of Al x Ga 1-x N/AlN (0 ⩽ x ⩽ 0.1) Stranski–Krastanov quantum dots (QDs) for application as the active region of electron-beam pumped ultraviolet lamps. Highly dense (>10 11 cm −2 ) QD layers are deposited by molecular beam epitaxy, and we explore the effect of the III/V ratio during the growth process on their optical performance. The study considers structures emitting in the 244–335 nm range at room temperature, with a relative linewidth in the 6%–11% range, mainly due to the QD diameter dispersion inherent in self-assembled growth. Under electron pumping, the emission efficiency remains constant for acceleration voltages below ≈9 kV. The correlation of this threshold with the total thickness of the SL and the penetration depth of the electron beam confirms the homogeneity of the nanostructures along the growth axis. Below the threshold, the emission intensity scales linearly with the injected current. The internal quantum efficiency (IQE) is characterized at low injection, which reveals the material properties in terms of non-radiative processes, and high injection, which emulates carrier injection in operation conditions. In QDs synthesized with III/V ratio −2 , being the first kind of nanostructure that present such stable behaviour.


  • Assessment of AlGaN/AlN superlattices on GaN nanowires as active region of electron-pumped ultraviolet sources

    by Ioanna Dimkou, Anjali Harikumar, Fabrice Donatini, Jonas Lähnemann, Martien Den Hertog, Catherine Bougerol, Edith Bellet-Amalric, Nicolas Mollard, Akhil Ajay, Gilles Ledoux, et al.

    In this paper, we describe the design and characterization of 400 nm long (88 periods) Al x Ga 1− x N/AlN (0 ≤ x ≤ 0.1) quantum dot superlattices deposited on self-assembled GaN nanowires for application in electron-pumped ultraviolet sources. The optical performance of GaN/AlN superlattices on nanowires is compared with the emission of planar GaN/AlN superlattices with the same periodicity and thickness grown on bulk GaN substrates along the N-polar and metal-polar crystallographic axes. The nanowire samples are less sensitive to nonradiative recombination than planar layers, attaining internal quantum efficiencies (IQE) in excess of 60% at room temperature even under low injection conditions. The IQE remains stable for higher excitation power densities, up to 50 kW cm −2 . We demonstrate that the nanowire superlattice is long enough to collect the electron–hole pairs generated by an electron beam with an acceleration voltage V A = 5 kV. At such V A , the light emitted from the nanowire ensemble does not show any sign of quenching under constant electron beam excitation (tested for an excitation power density around 8 kW cm −2 over the scale of minutes). Varying the dot/barrier thickness ratio and the Al content in the dots, the nanowire peak emission can be tuned in the range from 340 to 258 nm.