PGPaulraj Gnanasekar

Paulraj Gnanasekar

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Paulraj Gnanasekar has a total of 53 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Two-Dimensional Borophene–Transition Metal Dichalcogenide Heterostructure for Efficient Bias-Free Water Splitting under Concentrated Solar Illumination

    by Gowthambabu Vellingiri, Gunasekaran Ashokan, Paulraj Gnanasekar, Tien Khee Ng, Jeganathan Kulandaivel

    Integrating solar energy with water electrolysis provides a sustainable pathway for green hydrogen (H2) production by eliminating dependence on fossil fuel-derived electricity. In this work, we demonstrate a solar-driven photovoltaic–electrolysis (PV–EC) device using a commercial triple-junction (3J) photovoltaic cell coupled with water electrolysis enabled by two-dimensional (2D) borophene–transition metal dichalcogenide (TMDC) heterostructure electrocatalysts. Borophene–MoS2 and borophene–WS2 were synthesized via liquid-phase exfoliation, and their heterostructured architecture was confirmed through comprehensive structural, morphological, and chemical characterization. The bifunctional borophene–TMDC heterointerface promotes an efficient charge-transfer and favorable reaction kinetics for both hydrogen and oxygen evolution reactions by lowering the activation energy at both electrodes. The integrated PV–EC system delivers Faradaic efficiencies exceeding 90% and achieves a solar-to-hydrogen (STH) efficiency of ∼6.7% under simulated solar illumination. This study demonstrates that the metallic nature of borophene acts as a conductive scaffold, overcoming the intrinsic limitations of TMDCs to achieve bias-free, solar-driven water splitting.

  • Open Access

    Closing the nitrogen loop: sustainable ammonia production from industrial nitrate waste using a stacked electrolyzer

    by Paulraj Gnanasekar, Gowthambabu Vellingiri, Murtadha J. AlTammar, Karthik Peramaiah, Jeganathan Kulandaivel, Boon S. Ooi, Abeer A. Alarawi, Tien Khee Ng

    Nitrate in wastewater poses a significant threat to the aquatic ecosystem and disrupts the nitrogen cycle. In this study, we developed a stacked electrolyzer capable of converting nitrate in industrial effluents, even at low concentrations, into green ammonia (NH3) through the nitrate reduction reaction. Our catalyst synergistically transforms the nitrates into vital intermediates (NOx), which are then further reduced to NH3. The stacked electrolyzer achieved a faradaic efficiency of 37% and an NH3 yield of ∼7.8 mg h−1 when treating low-concentration industrial wastewater (1000 ppm). Additionally, it demonstrated a wastewater processing capacity of 5 L day−1 with a single-pass ammonia recovery of 27.7%. Overall, our approach of producing green ammonia from nitrate-laden effluents represents a promising solution for closing the nitrogen cycle.


  • Ionic Surfactant-Modified Few-Layer MoS 2 for High-Efficiency Solar-Driven Electrocatalytic Water Splitting

    by Gowthambabu Vellingiri, Manjupriya Jothi, Paulraj Gnanasekar, Tien Khee Ng, Boon S. Ooi, Jeganathan Kulandaivel

    The quest to eliminate environmentally harmful fuels is underway, with green hydrogen emerging as a promising solution. In this study, we developed a highly effective few-layer MoS2 catalyst using a two-step method involving liquid-phase exfoliation assisted by surfactants such as Sodium Dodecyl Sulfate (SDS) and Cetyltrimethylammonium Bromide (CTAB) and followed by hydrothermal reaction for the overall water splitting. Morphological, structural, and chemical characterizations confirmed the reduction in the number of layers and increased bandgap of MoS2-SDS through liquid phase exfoliation. Further, the effect of the surfactants on the electrocatalytic water splitting performance was evaluated, and it was found that SDS surfactant aided MoS2 (MoS2-SDS) demonstrated exceptional performance for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The electrodes demonstrated low overpotentials for the hydrogen evolution reaction (HER η10 = 125 mV) and oxygen evolution reaction (OER η10 = 213 mV), accompanied by a high surface area, significantly low charge transfer resistance, and electrochemical durability for over 20 h. In addition, overall water splitting performance was evaluated over 110 h with a Faradaic efficiency of over 90% and energy conversion efficiency of 60%. For a sustainable future, green hydrogen generated via renewable solar energy using few-layer MoS2-SDS has emerged as a highly promising alternative to noble metal-based catalysts for practical electrocatalytic alkaline water splitting.


  • Graphene-Interfaced NiCu-Layered Double Hydroxide Electrocatalyst for Hydrogen Production via Water Splitting

    by Manjupriya Jothi, Paulraj Gnanasekar, Gowthambabu Vellingiri, Suwathaa Venkataprabha, Tien Khee Ng, Boon S. Ooi, Jeganathan Kulandaivel


  • Solar‐Powered Gram‐Scale Ammonia Production from Nitrate

    by Paulraj Gnanasekar, Karthik Peramaiah, Huafan Zhang, Ibrahim G. Alsayoud, Anand S. Subbiah, Maxime Babics, Tien Khee Ng, Qiaoqiang Gan, Stefaan De Wolf, Kuo‐Wei Huang, et al.

    The photoelectrochemical (PEC) method has the potential to be an attractive route for converting and storing solar energy as chemical bonds. In this study, a maximum NH 3 production yield of 1.01 g L −1 with a solar‐to‐ammonia conversion efficiency of 8.17% through the photovoltaic electrocatalytic (PV‐EC) nitrate (NO 3 − ) reduction reaction (NO 3 − RR) is achieved, using silicon heterojunction solar cell technology. Additionally, the effect of tuning the operation potential of the PV‐EC system and its influence on product selectivity are systematically investigated. By using this unique external resistance tuning approach in the PV‐EC system, ammonia production through nitrate reduction performance from 96 to 360 mg L −1 is enhanced, a four‐fold increase. Furthermore, the NH 3 is extracted as NH 4 Cl powder using acid stripping, which is essential for storing chemical energy. This work demonstrates the possibility of tuning product selectivity in PV‐EC systems, with prospects toward pilot scale on value‐added product synthesis.


  • Open Access

    Protecting and Enhancing the Photoelectrocatalytic Performance of InGaN Nanowires toward Nitrogen Reduction to Ammonia Synthesis

    by Paulraj Gnanasekar, Karthik Peramaiah, Huafan Zhang, Mathan Kumar Eswaran, Rakesh Rosan Pradhan, Udo Schwingenschlögl, Tien Khee Ng, Qiaoqiang Gan, Jeganathan Kulandaivel, Kuo-Wei Huang, et al.


  • Open Access

    Nanostructured Gallium Nitride Membrane at Wafer Scale for Photo(Electro)catalytic Polluted Water Remediation

    by Huafan Zhang, Tae‐Hoon Chung, Kwangjae Lee, Paulraj Gnanasekar, Jung‐Wook Min, Tae‐Yong Park, Yue Wang, Tien Khee Ng, Udo Schwingenschlögl, Qiaoqiang Gan, et al.

    Photo(electro)catalysis methods have drawn significant attention for efficient, energy‐saving, and environmental‐friendly organic contaminant degradation in wastewater. However, conventional oxide‐based powder photocatalysts are limited to UV‐light absorption and are unfavorable in the subsequent postseparation process. In this paper, a large‐area crystalline‐semiconductor nitride membrane with a distinct nanoporous surface is fabricated, which can be scaled up to a full wafer and easily retrieved after photodegradation. The unique nanoporous surface enhances broadband light absorption, provides abundant reactive sites, and promotes the dye‐molecule reaction with adsorbed hydroxyl radicals on the surface. The superior electric contact between the nickel bottom layer and nitride membrane facilitates swift charge carrier transportation. In laboratory tests, the nanostructure membrane can degrade 93% of the dye in 6 h under illumination with a small applied bias (0.5 V vs Ag/AgCl). Furthermore, a 2 inch diameter wafer‐scale membrane is deployed in a rooftop test under natural sunlight. The membrane operates stably for seven cycles (over 50 h) with an outstanding dye degradation efficiency (>92%) and satisfied average total organic carbon removal rate (≈50%) in each cycle. This demonstration thus opens the pathway toward the production of nanostructured semiconductor layers for large‐scale and practical wastewater treatment using natural sunlight.


  • Open Access

    Protecting and Enhancing the Photoelectrocatalytic Nitrogen Reduction to Ammonia Performance of InGaN Nanowires using Mo2C Nanosheets and GaN Buffer Layer

    by Paulraj Gnanasekar, Karthik Peramaiy, Huafan Zhang, Tien Khee Ng, Kuo-Wei Huang, Jeganathan Kulandaivel, Boon S. Ooi

    Photoelectrocatalytic (PEC) reduction of N2 to ammonia (NH3) is emerging as the potential alternative to overcome the standard Haber-Bosch approach. In this communication, solar N2 reduction was demonstrated with molybdenum carbide (Mo2C) co-catalyst assisted indium gallium nitride (InGaN) nanowires. The effect of aiding Mo2C on InGaN NWs arrests the dark current and demonstrated the saturation current under illumination was briefly elucidated. Large NH3 production of 7.2 gh-1cm-2 with high Faradaic efficiency of 12.6 % was realized at -0.2 V vs. reversible hydrogen electrode for the Mo2C/GaN/InGaN heterostructure. Notably, the proposed heterostructure also exemplifies excellent stability and reproducibility with excellent selectivity in the long-term chronoamperometry analysis. Further, the incorporation of GaN buffer layer in between Mo2C and InGaN NWs was deeply investigated. From Density Functional Theory (DFT) analysis, the incorporation of GaN buffer layer aids the suitable band edge position for the transfer of photogenerated charge carrier from InGaN to Mo2C co-catalyst, and unique 3d orbital of Mo2C is highly suitable to hold N2 for effective reduction to NH3.