Huizhen Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Huizhen Xu has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Xiulin Wang
School of Science, Jimei University, Xiamen, People’s Republic of China
3 shared publicationsChangjie Zhou
School of Science, Jimei University, Xiamen 361021, China
1 shared publication- Cong Xu
Zhengzhou University
1 shared publication Dongqing Peng
School of Science, Jimei University, Xiamen, People’s Republic of China
1 shared publication- Gangqin Xi
School of Science, Jimei University Xiamen China
1 shared publication Huifang Sun
Department of Electronic Engineering, School of Electronic Science and Technology, Xiamen University, Xiamen 361005, China
1 shared publication
Latest Publications
- 5 November 2026
- Published by Wiley in Journal of Biophotonics
- Vol. 19 (11)
Collagen Profiling by Second Harmonic Generation for Preliminary Discrimination Between Benign Prostatic Hyperplasia and Prostate Cancer
Prostate cancer (PCa) is a common malignancy in men worldwide. Current diagnosis is limited by nonspecific serum markers, biopsy sampling errors, and subjective Gleason grading, highlighting the demand for objective and quantitative assessment approaches. Second harmonic generation (SHG) imaging enables label‐free characterization of collagen architecture remodeling in prostate tissue. We acquired SHG images and developed an automated framework to extract 142 collagen morphological and textural features. Using least absolute shrinkage and selection operator (LASSO) regression for feature selection and regularization, a prostate collagen index (PCI) was established. The PCI showed preliminary discrimination capability between benign prostatic hyperplasia (BPH) and PCa, with an exploratory region of Interest (ROI)‐level area under the curve (AUC) of 0.9286 and a primary case‐level AUC of 0.9688. These findings provide preliminary evidence supporting the feasibility of a LASSO‐driven, SHG‐based quantitative framework for integrating multidimensional collagen features and performing exploratory case‐level discrimination between BPH and PCa.
- 5 November 2026
- Published by Wiley in Journal of Biophotonics
- Vol. 19 (11)
Collagen Profiling by Second Harmonic Generation for Preliminary Discrimination Between Benign Prostatic Hyperplasia and Prostate Cancer
Prostate cancer (PCa) is a common malignancy in men worldwide. Current diagnosis is limited by nonspecific serum markers, biopsy sampling errors, and subjective Gleason grading, highlighting the demand for objective and quantitative assessment approaches. Second harmonic generation (SHG) imaging enables label‐free characterization of collagen architecture remodeling in prostate tissue. We acquired SHG images and developed an automated framework to extract 142 collagen morphological and textural features. Using least absolute shrinkage and selection operator (LASSO) regression for feature selection and regularization, a prostate collagen index (PCI) was established. The PCI showed preliminary discrimination capability between benign prostatic hyperplasia (BPH) and PCa, with an exploratory region of Interest (ROI)‐level area under the curve (AUC) of 0.9286 and a primary case‐level AUC of 0.9688. These findings provide preliminary evidence supporting the feasibility of a LASSO‐driven, SHG‐based quantitative framework for integrating multidimensional collagen features and performing exploratory case‐level discrimination between BPH and PCa.
- 15 July 2025
- Published by Wiley in Journal of Microscopy
Influence of polarisation states on the axial point spread function in subtractive second harmonic generation microscopy with a vortex beam
Doughnut‐shaped vortex beams are widely used to enhance lateral resolution in super‐resolution fluorescence microscopy and subtractive second harmonic generation microscopy. The influence of polarisation states on the axial point spread function is investigated theoretically and experimentally in subtractive second harmonic generation microscopy using a first‐order Laguerre–Gaussian vortex beam. The influence of left‐handed circular, right‐handed circular and linear polarised states are analysed for second harmonic generation imaging and compared with results of fluorescence imaging. The results exhibit great agreement with theoretical predictions, and demonstrate the superiority of left‐handed circular polarisation in achieving a complete dark central spot and an extended axial point spread function.
- 15 July 2025
- Published by Wiley in Journal of Microscopy
Influence of polarisation states on the axial point spread function in subtractive second harmonic generation microscopy with a vortex beam
Doughnut‐shaped vortex beams are widely used to enhance lateral resolution in super‐resolution fluorescence microscopy and subtractive second harmonic generation microscopy. The influence of polarisation states on the axial point spread function is investigated theoretically and experimentally in subtractive second harmonic generation microscopy using a first‐order Laguerre–Gaussian vortex beam. The influence of left‐handed circular, right‐handed circular and linear polarised states are analysed for second harmonic generation imaging and compared with results of fluorescence imaging. The results exhibit great agreement with theoretical predictions, and demonstrate the superiority of left‐handed circular polarisation in achieving a complete dark central spot and an extended axial point spread function.
- 25 June 2023
- Published by Taylor & Francis in Journal of Modern Optics
- Vol. 70 (11) , 673-680
Double-clad photonic crystal fibre for two-photon microscopy
- 25 June 2023
- Published by Taylor & Francis in Journal of Modern Optics
- Vol. 70 (11) , 673-680
Double-clad photonic crystal fibre for two-photon microscopy
- 5 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 19 (3) , 926-932
Broad Range and High Precision Self-Mixing Interferometer Based on Spectral Analysis With Multiple Reflections
In this paper, a novel self-mixing interferometer is proposed with spectral analysis by multiple reflection technique. The relationship between the vibration amplitude, the dominant frequency and the reflection time is deduced, which indicates that the theoretical minimum measurable vibration amplitude is 0.21λ/G(N,θ) and the precision is about 0.08λ/G(N,θ). The displacement sensitivity gain G(N,θ) increases with the reflection time. Theoretical analysis results show that the proposed method for vibration measurement has the advantages of high precision and broad measurement range, especially for the measurement of amplitude much smaller than λ/2. The validity of the method is tested by several experiments with different amplitudes and reflection times. An amplitude of 75 nm has been proved to be measurable and the absolute error is 5.43 nm, which is within the theoretical error range. The proposed method plays an important role in high precision and nanoscale measurement.
- 5 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 19 (3) , 926-932
Broad Range and High Precision Self-Mixing Interferometer Based on Spectral Analysis With Multiple Reflections
In this paper, a novel self-mixing interferometer is proposed with spectral analysis by multiple reflection technique. The relationship between the vibration amplitude, the dominant frequency and the reflection time is deduced, which indicates that the theoretical minimum measurable vibration amplitude is 0.21λ/G(N,θ) and the precision is about 0.08λ/G(N,θ). The displacement sensitivity gain G(N,θ) increases with the reflection time. Theoretical analysis results show that the proposed method for vibration measurement has the advantages of high precision and broad measurement range, especially for the measurement of amplitude much smaller than λ/2. The validity of the method is tested by several experiments with different amplitudes and reflection times. An amplitude of 75 nm has been proved to be measurable and the absolute error is 5.43 nm, which is within the theoretical error range. The proposed method plays an important role in high precision and nanoscale measurement.
- 17 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 30 (17) , 1499-1502
All-Solid Photonic Crystal Fiber for Dispersion Compensation Over $S+C+L$ Wavelength BandsA dual-concentric-core photonic crystal fiber (DCPCF) with low Germanium doping is numerically investigated for dispersion compensation. The inner cladding is formed by a Fluorine-doped concentric ring which is used to increase the index slope difference between two supermodes and eliminate the sensitivity of dispersion characteristic to air holes in the inner cladding of traditional structures. The proposed DCPCF can compensate for the dispersion and dispersion slope of a standard single mode fiber (SMF) at 1550nm wavelength. The K value matches with that of SMF very well. Moreover, it can realize an effective compensated dispersion range of ±0.8 ps/nm/km from 1.458μm to 1.626μm wavelength which covers the S+C+L bands. The geometric parameters on dispersion characteristic are investigated. The sensitivity of the fiber dispersion and the effective compensated dispersion to ±2% and ±5% variation in the optimum parameters is studied for practical fabrication.
- 17 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 30 (17) , 1499-1502
All-Solid Photonic Crystal Fiber for Dispersion Compensation Over $S+C+L$ Wavelength BandsA dual-concentric-core photonic crystal fiber (DCPCF) with low Germanium doping is numerically investigated for dispersion compensation. The inner cladding is formed by a Fluorine-doped concentric ring which is used to increase the index slope difference between two supermodes and eliminate the sensitivity of dispersion characteristic to air holes in the inner cladding of traditional structures. The proposed DCPCF can compensate for the dispersion and dispersion slope of a standard single mode fiber (SMF) at 1550nm wavelength. The K value matches with that of SMF very well. Moreover, it can realize an effective compensated dispersion range of ±0.8 ps/nm/km from 1.458μm to 1.626μm wavelength which covers the S+C+L bands. The geometric parameters on dispersion characteristic are investigated. The sensitivity of the fiber dispersion and the effective compensated dispersion to ±2% and ±5% variation in the optimum parameters is studied for practical fabrication.
- Open Access
- 1 January 2011
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 9 (5) , 050603
有超平坦色散光子晶体光纤的设计方法
A simple design procedure is used to generate photonic crystal fibers (PCFs) with ultra-flattened chromatic dispersion. Only four parameters are required, which not only considerably saves the computing time, but also distinctly reduces the air-hole quantity. The influence of the air-hole diameters of each ring of hexagonal PCFs (H-PCF, including 1-hole-missing and 7-hole-missing H-PCFs), circular PCFs (C-PCF), square PCFs (S-PCF), and octagonal PCFs (O-PCF) is investigated through simulations. Results show that regardless of the cross section structures of the PCFs, the 1st ring air-hole diameter has the greatest influence on the dispersion curve followed by that of the 2nd ring. The 3rd ring diameter only affects the dispersion curve within longer wavelengths, whereas the 4th and 5th rings have almost no influence on the dispersion curve. The hole-to-hole pitch between rings changes the dispersion curve as a whole. Based on the simulation results, a procedure is proposed to design PCFs with ultra-flattened dispersion. Through the adjustment of air-hole diameters of the inner three rings and hole-to-hole pitch, a flattened dispersion of 0+-0.5 ps/(nm.km) within a wavelength range of 1.239–2.083 \mum for 5-ring 1-hole-missing H-PCF, 1.248–1.992 \mum for 5-ring C-PCF, 1.237–2.21 \mum for 5-ring S-PCF, 1.149–1.926 \mum for 5-ring O-PCF, and 1.294–1.663 \mum for 7-hole-missing H-PCF is achieved.
- 1 January 2011
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 9 (5) , 050603
Open Access有超平坦色散光子晶体光纤的设计方法
A simple design procedure is used to generate photonic crystal fibers (PCFs) with ultra-flattened chromatic dispersion. Only four parameters are required, which not only considerably saves the computing time, but also distinctly reduces the air-hole quantity. The influence of the air-hole diameters of each ring of hexagonal PCFs (H-PCF, including 1-hole-missing and 7-hole-missing H-PCFs), circular PCFs (C-PCF), square PCFs (S-PCF), and octagonal PCFs (O-PCF) is investigated through simulations. Results show that regardless of the cross section structures of the PCFs, the 1st ring air-hole diameter has the greatest influence on the dispersion curve followed by that of the 2nd ring. The 3rd ring diameter only affects the dispersion curve within longer wavelengths, whereas the 4th and 5th rings have almost no influence on the dispersion curve. The hole-to-hole pitch between rings changes the dispersion curve as a whole. Based on the simulation results, a procedure is proposed to design PCFs with ultra-flattened dispersion. Through the adjustment of air-hole diameters of the inner three rings and hole-to-hole pitch, a flattened dispersion of 0+-0.5 ps/(nm.km) within a wavelength range of 1.239–2.083 \mum for 5-ring 1-hole-missing H-PCF, 1.248–1.992 \mum for 5-ring C-PCF, 1.237–2.21 \mum for 5-ring S-PCF, 1.149–1.926 \mum for 5-ring O-PCF, and 1.294–1.663 \mum for 7-hole-missing H-PCF is achieved.