Iolanda Nuzzo
Research Subjects
Iolanda Nuzzo has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Nicola Caterino
4 shared publications- Antonio Occhiuzzi
Construction Technologies Institute (ITC)—Secondary Branch of Naples, National Research Council of Italy (CNR), c/o Polo Tecnologico di San Giovanni a Teduccio, 80146 Naples, Italy
2 shared publications - Nicola Caterino
University of Naples “Parthenope
2 shared publications A. Novellino
ETT s.p.a
1 shared publicationA. Occhiuzzi
Italian National Research Council (CNR)
1 shared publication- Antonio Ianniello1 shared publication
Latest Publications
- Open Access
Intumescent Coatings for Fire Resistance of Steel Structures: Current Approaches for Qualification and Design
Intumescent coatings (ICs) are often used for protecting steel buildings during a fire when the structural, aesthetic, and architectural features of the structural members should be preserved. Indeed, ICs form a thin protective layer on the steel surface, that if exposed to fire or elevated temperatures, expands in volume with a consequent reduction in density. Hence, the protective layer captivates heat and protects the structural member from damage or elevated deformation. This reactive fire protection is designed using prescriptive tables, in which the IC thickness is chosen according to the required fire resistance, critical temperature, and section factor of the steel element. These tables are elaborated on the basis of the tests results according to the UNI EN 13381-8 standard, which is the reference for characterizing reactive systems such as ICs. For its reactive nature, this fire protection has to be applied to the structure in a controlled manner, and it is good practice to verify its correct application by measuring thickness and adhesion in situ through regulated methods. The qualification process of IC systems in Italy can be realized through a voluntary certification within the scope of a European technical assessment or by means of a national technical assessment certificate that is mandatory. All these aspects related to qualification, assessment, and design of ICs are often ignored by both designers and manufacturers, especially in Italy. Therefore, this paper describes all the approaches, introducing the main technical differences, in order to provide a sort of guideline on the use of these reactive fire protections.
Open AccessIntumescent Coatings for Fire Resistance of Steel Structures: Current Approaches for Qualification and Design
Intumescent coatings (ICs) are often used for protecting steel buildings during a fire when the structural, aesthetic, and architectural features of the structural members should be preserved. Indeed, ICs form a thin protective layer on the steel surface, that if exposed to fire or elevated temperatures, expands in volume with a consequent reduction in density. Hence, the protective layer captivates heat and protects the structural member from damage or elevated deformation. This reactive fire protection is designed using prescriptive tables, in which the IC thickness is chosen according to the required fire resistance, critical temperature, and section factor of the steel element. These tables are elaborated on the basis of the tests results according to the UNI EN 13381-8 standard, which is the reference for characterizing reactive systems such as ICs. For its reactive nature, this fire protection has to be applied to the structure in a controlled manner, and it is good practice to verify its correct application by measuring thickness and adhesion in situ through regulated methods. The qualification process of IC systems in Italy can be realized through a voluntary certification within the scope of a European technical assessment or by means of a national technical assessment certificate that is mandatory. All these aspects related to qualification, assessment, and design of ICs are often ignored by both designers and manufacturers, especially in Italy. Therefore, this paper describes all the approaches, introducing the main technical differences, in order to provide a sort of guideline on the use of these reactive fire protections.
- 1 September 2021
- Published by Elsevier in Engineering Structures
- Vol. 242
A BIM-based decision-making framework for optimal seismic retrofit of existing buildings
- 1 September 2021
- Published by Elsevier in Engineering Structures
- Vol. 242
A BIM-based decision-making framework for optimal seismic retrofit of existing buildings
- 25 August 2021
- Published by Springer Nature
- p. 663-676
A Technological Platform for Multi-risk Management and Mitigation in Campania Region, Italy
- 25 August 2021
- Published by Springer Nature
- p. 663-676
A Technological Platform for Multi-risk Management and Mitigation in Campania Region, Italy
- Open Access
- 15 June 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (12) , 5539
Computer-Aided Decision Making for Regional Seismic Risk Mitigation Accounting for Limited Economic Resources
Seismic risk mitigation levels for an existing building are a balance between the reduction of risk and the cost of rehabilitation. Evidently, the more that is paid the more risk is reduced; however, due to limited public budgets a practical approach is needed to manage the risk reduction program when a portfolio of buildings is concerned. Basically, decision makers face a challenge when there are a large number of vulnerable buildings and there is no plan for how to allocate the appointed budget. This study develops a technological platform that implements a decision-making procedure to establish how to optimally distribute the budget in order to achieve the maximum possible portfolio risk reduction. Decisions are made based on various presumed intervention strategies dependent on building’s level of risk. The technological platform provides an interactive, user-friendly tool, available online, that supports stakeholders and decision makers in understanding what the best economic resource allocation will be after selecting the available budget for a specific portfolio of buildings. In addition, the ease of use enables the user to analyze the extent of risk reduction achievable for different budget levels. Therefore, the web platform represents a powerful tool to accomplish two challenging tasks, namely optimal budget selection and optimal budget allocation to gain territorial seismic risk mitigation.
- 15 June 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (12) , 5539
Open AccessComputer-Aided Decision Making for Regional Seismic Risk Mitigation Accounting for Limited Economic Resources
Seismic risk mitigation levels for an existing building are a balance between the reduction of risk and the cost of rehabilitation. Evidently, the more that is paid the more risk is reduced; however, due to limited public budgets a practical approach is needed to manage the risk reduction program when a portfolio of buildings is concerned. Basically, decision makers face a challenge when there are a large number of vulnerable buildings and there is no plan for how to allocate the appointed budget. This study develops a technological platform that implements a decision-making procedure to establish how to optimally distribute the budget in order to achieve the maximum possible portfolio risk reduction. Decisions are made based on various presumed intervention strategies dependent on building’s level of risk. The technological platform provides an interactive, user-friendly tool, available online, that supports stakeholders and decision makers in understanding what the best economic resource allocation will be after selecting the available budget for a specific portfolio of buildings. In addition, the ease of use enables the user to analyze the extent of risk reduction achievable for different budget levels. Therefore, the web platform represents a powerful tool to accomplish two challenging tasks, namely optimal budget selection and optimal budget allocation to gain territorial seismic risk mitigation.
- 12 October 2020
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 26 (8) , 4325-4345
Seismic Design Framework Based on Loss-performance Matrix
A seismic loss-based design framework is proposed. It relies on the introduction of a multi-objective loss-performance matrix that attempts to set an innovative design approach directly associating loss measures to performance levels as a function of the design seismic intensity and the social importance of the building. This approach provides higher awareness about the economic consequences caused by structural and non-structural damage in the aftermath of an earthquake event. The design framework is applied to a case-study-reinforced concrete frame building designed as a traditional cast-in-situ moment resisting frame system, analyzing its performances within the new loss matrix.
- 12 October 2020
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 26 (8) , 4325-4345
Seismic Design Framework Based on Loss-performance Matrix
A seismic loss-based design framework is proposed. It relies on the introduction of a multi-objective loss-performance matrix that attempts to set an innovative design approach directly associating loss measures to performance levels as a function of the design seismic intensity and the social importance of the building. This approach provides higher awareness about the economic consequences caused by structural and non-structural damage in the aftermath of an earthquake event. The design framework is applied to a case-study-reinforced concrete frame building designed as a traditional cast-in-situ moment resisting frame system, analyzing its performances within the new loss matrix.
- 31 March 2020
- Published by Springer Nature
- p. 1773-1784
Use, Effectiveness and Long Term Reliability of MR Dampers for Seismic Protection of Framed Structures
- 31 March 2020
- Published by Springer Nature
- p. 1773-1784
Use, Effectiveness and Long Term Reliability of MR Dampers for Seismic Protection of Framed Structures
- 31 March 2020
- Published by Springer Nature
- p. 1857-1866
Proposal of Design Tools for a Shear Link Damper in Seismic Control of Frame Structures
- 31 March 2020
- Published by Springer Nature
- p. 1857-1866
Proposal of Design Tools for a Shear Link Damper in Seismic Control of Frame Structures
- Open Access
- 21 February 2020
- Published by Frontiers Media SA in Frontiers in Built Environment
- Vol. 6
DIBRAST: A Computer-Aided Seismic Design Procedure for Frame Structures Equipped With Hysteretic Devices
This paper describes a comprehensive computer-aided seismic design approach for both new and existing frame structures equipped with hysteretic dampers. Despite continuous advancements in the state of the art demonstrating the effectiveness of these devices in mitigating seismic hazard, non-linearities involved in the problem and the articulated nature of most of the available design procedures often make them quite difficult to be implemented for real complex structures. To promote widespread use of hysteretic dampers, we present a thorough design approach that includes the application of a specific displacement-based design procedure by means of a computer-aided support tool developed in a Visual Basic environment and named DIBRAST. The software is realized to drive the designer through the dissipative system’s design. Required iterations are automated, thus significantly reducing the processing time. As its final output, it delivers the mechanical properties of the damping braces in order to meet a specific performance objective. In order to further support practitioners in the geometrical characterization of actual design dampers, authors developed an additional Visual Basic tool—the Shear Link Non-Linear Model—that is able to provide yielding force and elastic stiffness of a specific type of hysteretic device according to its geometry and material. In addition, geometric details of each device can be preliminary determined by means of newly proposed design charts, presented herein, that allow us to take into account the buckling issue too. Both developed tools are freely available online. A case study is provided to demonstrate the effectiveness of the proposed design approach and tools.
- 21 February 2020
- Published by Frontiers Media SA in Frontiers in Built Environment
- Vol. 6
Open AccessDIBRAST: A Computer-Aided Seismic Design Procedure for Frame Structures Equipped With Hysteretic Devices
This paper describes a comprehensive computer-aided seismic design approach for both new and existing frame structures equipped with hysteretic dampers. Despite continuous advancements in the state of the art demonstrating the effectiveness of these devices in mitigating seismic hazard, non-linearities involved in the problem and the articulated nature of most of the available design procedures often make them quite difficult to be implemented for real complex structures. To promote widespread use of hysteretic dampers, we present a thorough design approach that includes the application of a specific displacement-based design procedure by means of a computer-aided support tool developed in a Visual Basic environment and named DIBRAST. The software is realized to drive the designer through the dissipative system’s design. Required iterations are automated, thus significantly reducing the processing time. As its final output, it delivers the mechanical properties of the damping braces in order to meet a specific performance objective. In order to further support practitioners in the geometrical characterization of actual design dampers, authors developed an additional Visual Basic tool—the Shear Link Non-Linear Model—that is able to provide yielding force and elastic stiffness of a specific type of hysteretic device according to its geometry and material. In addition, geometric details of each device can be preliminary determined by means of newly proposed design charts, presented herein, that allow us to take into account the buckling issue too. Both developed tools are freely available online. A case study is provided to demonstrate the effectiveness of the proposed design approach and tools.
- 19 January 2019
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 17 (5) , 2787-2819
Seismic design and retrofit of frame structures with hysteretic dampers: a simplified displacement-based procedure
- 19 January 2019
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 17 (5) , 2787-2819
Seismic design and retrofit of frame structures with hysteretic dampers: a simplified displacement-based procedure