Tatsuki Oda
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tatsuki Oda has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Masao Obata
Kanazawa University
10 shared publications Masao Obata
Kanazawa University
8 shared publications- Indra Pardede
Graduate School of Natural Science and Technology, Kanazawa University, Kanazawa 920-1192, Japan
4 shared publications Daiki Yoshikawa
Kanazawa University
3 shared publications- Ikutaro Hamada
Department of Precision Engineering, Graduate School of Engineering, The University of Osaka, Suita, Osaka 565-0871, Japan
3 shared publications Mega Christivana
Graduate School of Natural Science and Technology, Kanazawa University, Kanazawa 920-1192, Japan
3 shared publications
Latest Publications
- Open Access
- 28 September 2026
- Published by Springer Nature
- p. 308-314
Migration of the a-b Twin Boundary in a Modulated Martensite Phase of Magnetic Shape Memory Alloy Ni$_2$MnGaTwin boundary migration and formation of twins in the martensite phase of Ni $$_2$$ MnGa are significant to understanding the magnetic shape memory effects. This work explored the migration mechanism of the nanotwin boundaries among the layers by first-principles calculations. We systematically analyzed intermediate structures throughout the migration path. We identified three key factors that significantly impact energy barriers in migration processes: distortion of the tetragonal building block, number of migrated layers, and the existence of a 2-layer structure. We observed that the energy barrier in the 10M modulated phase is significantly smaller compared to the 14M one.- 28 September 2026
- Published by Springer Nature
- p. 308-314
Open AccessMigration of the a-b Twin Boundary in a Modulated Martensite Phase of Magnetic Shape Memory Alloy Ni$_2$MnGaTwin boundary migration and formation of twins in the martensite phase of Ni $$_2$$ MnGa are significant to understanding the magnetic shape memory effects. This work explored the migration mechanism of the nanotwin boundaries among the layers by first-principles calculations. We systematically analyzed intermediate structures throughout the migration path. We identified three key factors that significantly impact energy barriers in migration processes: distortion of the tetragonal building block, number of migrated layers, and the existence of a 2-layer structure. We observed that the energy barrier in the 10M modulated phase is significantly smaller compared to the 14M one. - Open Access
- 28 September 2026
- Published by Springer Nature
- p. 339-345
Parallelization in the Code of Quasi-Particle Self-consistent GW and Electronic Structure in the Magnetic Shape Memory Alloy Ni$_{2}$MnGaThe quasi-particle self-consistent GW (QSGW) is a universal approach to reliable prediction of electronic structures. The calculation of polarization function, one of the most computationally expensive parts, has mainly been parallelized in the QSGW code. The parallelization efficiency was almost ideal for the several numbers of processor elements (PEs) and decreased as the number of PEs was increased; an efficiency of 60% at 30 PEs and a speedup of more than 10 times for an electronic structure calculation (production run) of magnetic shape memory alloy Ni $$_{2}$$ MnGa with the 4O structure containing 16 atoms in the unit cell. We found an interesting change of electronic structures at the nanotwin double layer in the 4O structure from those of the non-modulated (NM) structure. The peak of density of states appearing near the Fermi level in NM was split to its above and below in 4O, implying an electronic stability of nanotwin double layer.- 28 September 2026
- Published by Springer Nature
- p. 339-345
Open AccessParallelization in the Code of Quasi-Particle Self-consistent GW and Electronic Structure in the Magnetic Shape Memory Alloy Ni$_{2}$MnGaThe quasi-particle self-consistent GW (QSGW) is a universal approach to reliable prediction of electronic structures. The calculation of polarization function, one of the most computationally expensive parts, has mainly been parallelized in the QSGW code. The parallelization efficiency was almost ideal for the several numbers of processor elements (PEs) and decreased as the number of PEs was increased; an efficiency of 60% at 30 PEs and a speedup of more than 10 times for an electronic structure calculation (production run) of magnetic shape memory alloy Ni $$_{2}$$ MnGa with the 4O structure containing 16 atoms in the unit cell. We found an interesting change of electronic structures at the nanotwin double layer in the 4O structure from those of the non-modulated (NM) structure. The peak of density of states appearing near the Fermi level in NM was split to its above and below in 4O, implying an electronic stability of nanotwin double layer. - Open Access
- 28 September 2026
- Published by Springer Nature
- p. 315-322
Computational Acceleration on Density Functional Approach Code Using GPU
The density functional theory (DFT) calculations, promising tools for analyzing and predicting the physical properties of molecules and solids, are currently used in various fields of material science. The acceleration of DFT calculations is crucial to promote the investigations. For this purpose, we have developed a GPU-accelerated DFT code with the plane wave basis set and the ultrasoft pseudopotential scheme. Through the analysis of the efficiency of the GPU implementation, we have shown that reducing data transfer between CPU and GPU is vital for achieving high efficiency. The reduction of data transfer has been achieved by utilizing the GPU memory with the data GPUization implementation.
- 28 September 2026
- Published by Springer Nature
- p. 315-322
Open AccessComputational Acceleration on Density Functional Approach Code Using GPU
The density functional theory (DFT) calculations, promising tools for analyzing and predicting the physical properties of molecules and solids, are currently used in various fields of material science. The acceleration of DFT calculations is crucial to promote the investigations. For this purpose, we have developed a GPU-accelerated DFT code with the plane wave basis set and the ultrasoft pseudopotential scheme. Through the analysis of the efficiency of the GPU implementation, we have shown that reducing data transfer between CPU and GPU is vital for achieving high efficiency. The reduction of data transfer has been achieved by utilizing the GPU memory with the data GPUization implementation.
- Open Access
- 19 December 2025
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 38 (1) , 015502
Role of magnetic ordering on transformation properties of Heusler Ni 2 MnGa magnetic shape memory alloy
We pursued a theoretical investigation of the Ni–Mn–Ga Heusler alloy to understand the role of magnetism on the lattice stability and, consequently, the magnetic shape memory (MSM) effect. Two ab initio methods were used for the calculations: the widely used standard density functional theory and the advanced quasiparticle self-consistent GW (QSGW) method. The latter is expected to be more accurate due to the explicit inclusion of electron correlation. The generalized susceptibility calculated by QSGW indicated that the existence of magnetic ordering in the high temperature phase, austenite, is crucial for the formation of the modulated martensites. The ferromagnetic austenite transforms into modulated martensites that can exhibit MSM, but the paramagnetic austenite does not possess this tendency in accordance with experimental observations. In the non-modulated tetragonal martensite (NM), we investigated the role of magnetic ordering on the stability of the lattice and twinning interface. We found that the elastic constants remain unchanged during magnetic moment rotation, confirming the stability of NM in agreement with the notion that it is a ground state. Furthermore, the calculation revealed that the magnetization rotation has a negligible influence on the stability of the twinning interface in NM
- 19 December 2025
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 38 (1) , 015502
Open AccessRole of magnetic ordering on transformation properties of Heusler Ni 2 MnGa magnetic shape memory alloy
We pursued a theoretical investigation of the Ni–Mn–Ga Heusler alloy to understand the role of magnetism on the lattice stability and, consequently, the magnetic shape memory (MSM) effect. Two ab initio methods were used for the calculations: the widely used standard density functional theory and the advanced quasiparticle self-consistent GW (QSGW) method. The latter is expected to be more accurate due to the explicit inclusion of electron correlation. The generalized susceptibility calculated by QSGW indicated that the existence of magnetic ordering in the high temperature phase, austenite, is crucial for the formation of the modulated martensites. The ferromagnetic austenite transforms into modulated martensites that can exhibit MSM, but the paramagnetic austenite does not possess this tendency in accordance with experimental observations. In the non-modulated tetragonal martensite (NM), we investigated the role of magnetic ordering on the stability of the lattice and twinning interface. We found that the elastic constants remain unchanged during magnetic moment rotation, confirming the stability of NM in agreement with the notion that it is a ground state. Furthermore, the calculation revealed that the magnetization rotation has a negligible influence on the stability of the twinning interface in NM
- Open Access
- 29 August 2025
- Published by Elsevier in Computational Materials Science
- Vol. 260
Efficient implementation of the quasiparticle self-consistent G W method on GPU
- 29 August 2025
- Published by Elsevier in Computational Materials Science
- Vol. 260
Open AccessEfficient implementation of the quasiparticle self-consistent G W method on GPU
- 11 June 2025
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1015, 23-28
Layer-Resolved Rashba Spin-Orbit Coupling of Ferromagnetic Interface from a First-Principles Study
We investigated a Rashba-type spin-orbit coupling in a density functional approach based on a grand-canonical force theorem (GCFT). In the investigation, we introduced an averaged effective Rashba parameter estimated at each layer in several realistic magnetic slabs. This parameter may be used to characterize an intrinsic effective electric field imposed on the atomic layer. In particular, the interface between magnetic and non-magnetic materials enhances the parameters of the magnetic layer, such as interfaces of spintronics applications.
- 11 June 2025
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1015, 23-28
Layer-Resolved Rashba Spin-Orbit Coupling of Ferromagnetic Interface from a First-Principles Study
We investigated a Rashba-type spin-orbit coupling in a density functional approach based on a grand-canonical force theorem (GCFT). In the investigation, we introduced an averaged effective Rashba parameter estimated at each layer in several realistic magnetic slabs. This parameter may be used to characterize an intrinsic effective electric field imposed on the atomic layer. In particular, the interface between magnetic and non-magnetic materials enhances the parameters of the magnetic layer, such as interfaces of spintronics applications.
- 21 February 2023
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 7 (2) , 024413
Intrinsic instability to martensite phases in ferromagnetic shape memory alloy : Quasiparticle self-consistent investigationWe investigated the electronic structure of a ferromagnetic shape memory alloy utilizing an advanced approach, quasiparticle self-consistent , which takes account of electron localization effects without empirical parameters. The Ni orbitals in the cubic phase, which lead to martensite phase transition, were found to locate on the Fermi level, implying a clear definitive origin of band Jahn-Teller (JT) effect in comparison with the results obtained by the density functional approach of generalized gradient approximation. From the analysis of generalized susceptibility in the cubic phase, the instabilities responsible for the modulated structures of 10M, 14M, and 6M were found to be an intrinsic property in the electronic states. These states may stabilize the modulated one, accompanied by tetragonal local JT distortions. Their property of Fermi surface nesting sensitively depends on a subtle change in the magnetic moment, corresponding to the experimental fact that the modulated structure appears depending on temperature and the composition of the magnetic element. The secondary nesting vector along [110] direction was discussed in relation to a modulation alignment of the nanotwin boundary.- 21 February 2023
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 7 (2) , 024413
Intrinsic instability to martensite phases in ferromagnetic shape memory alloy : Quasiparticle self-consistent investigationWe investigated the electronic structure of a ferromagnetic shape memory alloy utilizing an advanced approach, quasiparticle self-consistent , which takes account of electron localization effects without empirical parameters. The Ni orbitals in the cubic phase, which lead to martensite phase transition, were found to locate on the Fermi level, implying a clear definitive origin of band Jahn-Teller (JT) effect in comparison with the results obtained by the density functional approach of generalized gradient approximation. From the analysis of generalized susceptibility in the cubic phase, the instabilities responsible for the modulated structures of 10M, 14M, and 6M were found to be an intrinsic property in the electronic states. These states may stabilize the modulated one, accompanied by tetragonal local JT distortions. Their property of Fermi surface nesting sensitively depends on a subtle change in the magnetic moment, corresponding to the experimental fact that the modulated structure appears depending on temperature and the composition of the magnetic element. The secondary nesting vector along [110] direction was discussed in relation to a modulation alignment of the nanotwin boundary.- Open Access
Anatomy of Magnetic Anisotropy and Voltage-Controlled Magnetic Anisotropy in Metal Oxide Heterostructure from First Principles
Voltage control of magnetic anisotropy (VCMA) is one of the promising approaches for magnetoelectric control of magnetic tunnel junction (MTJ). Here, we systematically calculated the magnetic anisotropy (MA) and the VCMA energies in the well-known MTJ structure consisting of Fe/MgO interface with Cr buffer layer. In this calculation, we investigated an alloying between Fe and Cr and a strain effect. We used a spin density functional approach which includes both contributions from magnetocrystalline anisotropy energy (MCAE) originating from spin–orbit coupling and shape magnetic anisotropy energy from spin dipole–dipole interaction. In the present approach, the MCAE part, in addition to a common scheme of total energy, was evaluated using a grand canonical force theorem scheme. In the latter scheme, atom-resolved and -resolved analyses for MA and VCMA can be performed. At first, we found that, as the alloying is introduced, the perpendicular MCAE increases by a factor of two. Next, as the strain is introduced, we found that the MCAE increases with increasing compressive strain with the maximum value of 2.2 mJ/m. For the VCMA coefficient, as the compressive strain increases, the sign becomes negative and the absolute value becomes enhanced to the number of 170 fJ/Vm. By using the atom-resolved and -resolved analyses, we clarified that these enhancements of MCAE and VCMA mainly originates from the Fe interface with MgO (Fe) and are located at certain lines in the two dimensional Brillouin zone. The findings on MCAE and VCMA are fully explained by the spin-orbit couplings between the certain d-orbital states in the second-order perturbation theory.Open AccessAnatomy of Magnetic Anisotropy and Voltage-Controlled Magnetic Anisotropy in Metal Oxide Heterostructure from First Principles
Voltage control of magnetic anisotropy (VCMA) is one of the promising approaches for magnetoelectric control of magnetic tunnel junction (MTJ). Here, we systematically calculated the magnetic anisotropy (MA) and the VCMA energies in the well-known MTJ structure consisting of Fe/MgO interface with Cr buffer layer. In this calculation, we investigated an alloying between Fe and Cr and a strain effect. We used a spin density functional approach which includes both contributions from magnetocrystalline anisotropy energy (MCAE) originating from spin–orbit coupling and shape magnetic anisotropy energy from spin dipole–dipole interaction. In the present approach, the MCAE part, in addition to a common scheme of total energy, was evaluated using a grand canonical force theorem scheme. In the latter scheme, atom-resolved and -resolved analyses for MA and VCMA can be performed. At first, we found that, as the alloying is introduced, the perpendicular MCAE increases by a factor of two. Next, as the strain is introduced, we found that the MCAE increases with increasing compressive strain with the maximum value of 2.2 mJ/m. For the VCMA coefficient, as the compressive strain increases, the sign becomes negative and the absolute value becomes enhanced to the number of 170 fJ/Vm. By using the atom-resolved and -resolved analyses, we clarified that these enhancements of MCAE and VCMA mainly originates from the Fe interface with MgO (Fe) and are located at certain lines in the two dimensional Brillouin zone. The findings on MCAE and VCMA are fully explained by the spin-orbit couplings between the certain d-orbital states in the second-order perturbation theory. - 15 March 2020
- Published by Physical Society of Japan in Journal of the Physical Society of Japan
- Vol. 89 (3)
Density Functional Approach under External Magnetic Field
We implemented a density functional scheme that enables application of a uniform external magnetic field. In the implementation, the rotation of the magnetic moment on an atom/molecule was describe...
- 15 March 2020
- Published by Physical Society of Japan in Journal of the Physical Society of Japan
- Vol. 89 (3)
Density Functional Approach under External Magnetic Field
We implemented a density functional scheme that enables application of a uniform external magnetic field. In the implementation, the rotation of the magnetic moment on an atom/molecule was describe...