Petra Hajdova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Petra Hajdova has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Pavel Diko
Slovak Academy of Sciences
4 shared publications - Michal Rajnak
Institute of Experimental Physics, Slovak Academy of Sciences, Watsonova 47, 040 01 Košice, Slovakia
2 shared publications - Vitaliy Antal
Institute of Experimental Physics of the Slovak Academy of Sciences, 47 Watsonova Str., 040 01 Kosice, Slovak
2 shared publications Daniela Volochová
Institute of Experimental Physics Slovak Academy of Sciences Kosice Slovakia
1 shared publication- Daniela Volochová
Institute of Experimental Physics SAS, Watsonova 47, 040 01 Kosice, Slovak Republic
1 shared publication E. Mudra
Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, 040 01 Košice, Slovakia
1 shared publication
Latest Publications
- 2 September 2022
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 105 (12) , 7822-7830
Bulk GdBCO–Ag superconductors with holes
Bulk single‐grain GdBCO–Ag superconductors with and without holes grown using a top‐seeded melt‐growth process are analyzed. The levitation force at 77 K is higher for the sample with holes. From the performed complex microstructural analysis, we were able to assess the positive, negative, or neutral contribution of the analyzed microstructural elements in the studied samples. It turns out that the macroscopic superconducting properties can be negatively affected by defects arising during the absorption of the holes by the growth front of the crystal. Other microstructural features, such as a higher volume fraction of Gd 2 BaCuO 5 (Gd211) in the a ‐growth sector (GS) than in the c ‐GS and the presence of tetragonal regions of GdBa 2 Cu 3 O 7− x (Gd123) are similar in both samples and cannot significantly affect the observed difference in macroscopic superconducting properties. In terms of macroscopic superconducting properties, in our opinion the most important is the lower porosity of the a ‐GSs in the upper part of the sample with holes.
- 2 September 2022
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 105 (12) , 7822-7830
Bulk GdBCO–Ag superconductors with holes
Bulk single‐grain GdBCO–Ag superconductors with and without holes grown using a top‐seeded melt‐growth process are analyzed. The levitation force at 77 K is higher for the sample with holes. From the performed complex microstructural analysis, we were able to assess the positive, negative, or neutral contribution of the analyzed microstructural elements in the studied samples. It turns out that the macroscopic superconducting properties can be negatively affected by defects arising during the absorption of the holes by the growth front of the crystal. Other microstructural features, such as a higher volume fraction of Gd 2 BaCuO 5 (Gd211) in the a ‐growth sector (GS) than in the c ‐GS and the presence of tetragonal regions of GdBa 2 Cu 3 O 7− x (Gd123) are similar in both samples and cannot significantly affect the observed difference in macroscopic superconducting properties. In terms of macroscopic superconducting properties, in our opinion the most important is the lower porosity of the a ‐GSs in the upper part of the sample with holes.
- 1 May 2020
- Published by Institute of Physics, Polish Academy of Sciences in Acta Physica Polonica A
- Vol. 137 (5) , 800-802
Effect of TiO2 Fibers on Properties of Single-Grain Bulk GdBCO Superconductors
- 1 May 2020
- Published by Institute of Physics, Polish Academy of Sciences in Acta Physica Polonica A
- Vol. 137 (5) , 800-802
Effect of TiO2 Fibers on Properties of Single-Grain Bulk GdBCO Superconductors
- 20 January 2020
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 33 (3) , 034003
Inhomogeneity of SmBCO bulk superconductors grown in air
The local superconducting properties and microstructure of SmBCO bulk single-grain superconductors with the addition of different quantities of BaO 2 were studied. The single-grain bulk SmBCO superconductors were fabricated via the top-seeded melt growth process in air. Increasing transition temperature, critical current density and the narrowing superconducting transition width were observed with BaO 2 addition. It was shown that the transition temperature and critical current density depend on the distance from the seed. Microstructural analysis showed that the reaction of Ba with the supporting ZrO 2 bars is responsible for the gradient of Ba concentration in the peritectic melt, and consequent changes in Sm/Ba substitution in the Sm123 crystal lattice lead to the inhomogeneity of local superconducting properties.
- 20 January 2020
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 33 (3) , 034003
Inhomogeneity of SmBCO bulk superconductors grown in air
The local superconducting properties and microstructure of SmBCO bulk single-grain superconductors with the addition of different quantities of BaO 2 were studied. The single-grain bulk SmBCO superconductors were fabricated via the top-seeded melt growth process in air. Increasing transition temperature, critical current density and the narrowing superconducting transition width were observed with BaO 2 addition. It was shown that the transition temperature and critical current density depend on the distance from the seed. Microstructural analysis showed that the reaction of Ba with the supporting ZrO 2 bars is responsible for the gradient of Ba concentration in the peritectic melt, and consequent changes in Sm/Ba substitution in the Sm123 crystal lattice lead to the inhomogeneity of local superconducting properties.
- 9 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 29 (3) , 1-5
Growth, Microstructure, and Properties of GdBCO–Ag Superconductor
We prepared ${\mathrm{GdBa}}_{2}{\mathrm{Cu}}_{3}{\mathrm{O}}_{7-\delta}$ (Gd123, GdBCO) single-grain bulk with Ag addition via the top-seeded melt growth (TSMG) method. Peritectic temperatures of precursor powder mixture and pure Gd123 powder were tested by differential thermal analysis (DTA). The dependence of the volume fraction and the size of ${\mathrm{Gd}}_2{\mathrm{BaCuO}}_5$ (Gd211) particles on the distance from the seed was determined with the help of image processing of the micrographs taken by scanning electron microscope (SEM) from the polished a/c-section of the sample. The morphology of Ag particles was evaluated by the SEM image analysis. The substitution of Ag in Gd123 was characterized by the wavelength-dispersive spectrometry (WDS). The magnetic measurements of superconducting properties (critical current density $J_c$ at 77 K and critical temperature $T_c$ ) were carried out using a vibrating sample magnetometer. Magnetization measurements were per-formed on the specimens taken from several different locations of the same crystal plane and the value of the maximum middle critical temperature ( $T_{c,m}$ ) was determined as 92.6 K.- 9 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 29 (3) , 1-5
Growth, Microstructure, and Properties of GdBCO–Ag Superconductor
We prepared ${\mathrm{GdBa}}_{2}{\mathrm{Cu}}_{3}{\mathrm{O}}_{7-\delta}$ (Gd123, GdBCO) single-grain bulk with Ag addition via the top-seeded melt growth (TSMG) method. Peritectic temperatures of precursor powder mixture and pure Gd123 powder were tested by differential thermal analysis (DTA). The dependence of the volume fraction and the size of ${\mathrm{Gd}}_2{\mathrm{BaCuO}}_5$ (Gd211) particles on the distance from the seed was determined with the help of image processing of the micrographs taken by scanning electron microscope (SEM) from the polished a/c-section of the sample. The morphology of Ag particles was evaluated by the SEM image analysis. The substitution of Ag in Gd123 was characterized by the wavelength-dispersive spectrometry (WDS). The magnetic measurements of superconducting properties (critical current density $J_c$ at 77 K and critical temperature $T_c$ ) were carried out using a vibrating sample magnetometer. Magnetization measurements were per-formed on the specimens taken from several different locations of the same crystal plane and the value of the maximum middle critical temperature ( $T_{c,m}$ ) was determined as 92.6 K.- 1 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 28 (4) , 1-4
Change of Superconducting Properties of Single-Grain Sm–Ba–Cu–O Bulk by Sm/Ba Substitution Effect
Several studies showed that the SmBa$_{2}$Cu$_{3}$O$_{7-\delta}$ (Sm123, SmBCO) achieve higher critical current density (J$_{c}$) and critical transition temperature (T$_{c}$) in comparison to the YBa$_{2}$Cu$_{3}$O$_{7-\delta}$. On the other hand, the high sensitivity of Sm/Ba substitution at the solidification on the temperature of solidification is caused by changes of Sm solubility in the Sm123, what can be an obstacle to fabrication of SmBCO single grains with homogenous superconducting properties. We prepared Sm123 single grain bulk superconductors with addition of 1 wt. % CeO$_{2}$ and BaO$_{2}$, fabricated via the top-seeded melt growth (TSMG) process in air applying the slow cooling time-temperature profile. Evaluation of a substitution effect was based on an analysis of local superconducting properties and also on the results of EDS analysis from different sample location.
- 1 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 28 (4) , 1-4
Change of Superconducting Properties of Single-Grain Sm–Ba–Cu–O Bulk by Sm/Ba Substitution Effect
Several studies showed that the SmBa$_{2}$Cu$_{3}$O$_{7-\delta}$ (Sm123, SmBCO) achieve higher critical current density (J$_{c}$) and critical transition temperature (T$_{c}$) in comparison to the YBa$_{2}$Cu$_{3}$O$_{7-\delta}$. On the other hand, the high sensitivity of Sm/Ba substitution at the solidification on the temperature of solidification is caused by changes of Sm solubility in the Sm123, what can be an obstacle to fabrication of SmBCO single grains with homogenous superconducting properties. We prepared Sm123 single grain bulk superconductors with addition of 1 wt. % CeO$_{2}$ and BaO$_{2}$, fabricated via the top-seeded melt growth (TSMG) process in air applying the slow cooling time-temperature profile. Evaluation of a substitution effect was based on an analysis of local superconducting properties and also on the results of EDS analysis from different sample location.