FMFrank A. Manthey

Frank A. Manthey

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Frank A. Manthey has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Soluble phenolic compounds affect functional and rheological properties of black bean protein isolates

    by Supun Fernando, Frank A. Manthey

    Background and objectives: Phenolic compounds are known to form complexes with proteins which cause changes in the structural, functional, and nutritional properties of both compounds. The objective of this study was to evaluate the effect of removing soluble phenolic compounds from whole bean and cotyledon flours on the functional and rheological properties of black bean protein isolates.Findings: Protein isolates from cotyledon flour free of soluble phenolics (CFPInoP) had significantly lower (p < .05) ash content and significantly higher (p < .05) protein content and brightness compared with other protein isolates. CFPInoP had significantly greater (p < .05) wettability, dispersibility, foaming capacity (FC), foaming stability, emulsion capacity (EC), and emulsion stability (ES) than other protein isolates. Water‐binding capacity (WBC) was significantly greater (p < .05) for protein isolates with high phenolic content. Storage modulus and loss modulus were lower for protein gels made from protein isolates containing phenolic compounds compared with those made from protein isolates without soluble phenolic compounds.Conclusions: Removal of soluble phenolic compounds improved the functional and rheological properties of black bean protein isolates.Significance and novelty: As potential food ingredients, the functional properties of black bean protein isolates without soluble phenolic compounds were better compared with protein isolates with soluble phenolic compounds.


  • Variations of colour, polyphenol oxidase and peroxidase activities during the production of low temperature dried pasta in various durum wheat genotypes

    by Patricia A. Cabas‐Lühmann, Frank A. Manthey, Elias M. Elias

    Summary: This research was conducted to determine the effect of milling and pasta making on yellow pigment content, soluble brown pigment content, polyphenol oxidase (PPO) activity and peroxidase (POD) activity in semolina and pasta derived from ten durum genotypes. Results showed that pasta colour was impacted more by the milling than by pasta making. The loss of yellow pigment content, POD activity, PPO activity and soluble brown pigment content due to milling was 1.3×, 4.4×, 6.2× and 17.5×, respectively, greater than losses due to pasta making. Dry pasta contained 62%, 31%, 16% and 25% of the original yellow pigment content, brown pigment content and PPO activity and POD activity in the grain, respectively. Semolina yellow pigment content had a positive effect on pasta colour while semolina protein content, ash content and speck count had negative effects. These results indicate the importance of selecting genotypes that have high yellow pigment content and excellent milling qualities.


  • Relationship between cooking quality of fresh pasta made from durum wheat and protein content and molecular weight distribution parameters

    by Sara Moayedi, Jae‐Bom Ohm, Frank A. Manthey

    Background and objectives: Although proteins are known to have a dominant impact on pasta cooking quality for dry pasta, little information has been reported on associations between proteins and the cooking quality of fresh pasta. Therefore, the objective of this research was to assess associations between protein molecular weight distribution (MWD) parameters and cooking quality of fresh pasta made from durum wheat.Findings: Semolina samples that had high protein contents produced fresh pasta with high cooked pasta firmness (CPF) and low cooked pasta weight (CPW) and cooking loss. Protein MWD parameters varied with their associations with pasta cooking quality. Variation in CPF was positively associated with combination of SDS extractable and unextractable gliadin and albumin +globulin fractions but negatively associated with SDS extractable polymeric protein fraction. The CPW was positively affected by extractable polymeric protein fraction, while impact of albumin +globulin fraction was negative.Conclusions: Protein fractions had predominant and different roles on the variation of CPF and CPW of fresh pasta.Significance and novelty: This research reports novel information on associations between fresh pasta cooking quality and protein MWD parameters. The research identified protein components that had dominant roles in determining pasta cooking quality of fresh pasta.


  • Milling method affects the physical properties of black bean flour

    by Supun Fernando, Frank A. Manthey


  • Environment during grain filling affects pasta color

    by Patricia A. Cabas‐Lühmann, Frank A. Manthey

    Background and objectives: Pasta color is an important quality parameter for pasta companies and consumers. This research was carried out to determine the relative importance of environment and genotype effects on pasta color and related traits using durum lines grown in North Dakota, USA; to determine the relationships between pasta color and semolina quality traits; and to identify key environmental growing conditions that affect pasta color.Findings: The environment had the highest relative proportion of variance for pasta color (ranged from 89% to 94%) and related traits. Stepwise linear regression analyses indicated that the number of days with relative humidity (rh) ≥80% was associated with diminished pasta brightness, yellowness, and enhanced pasta redness, while the number of days ≤13°C was associated with enhanced pasta yellowness and pasta color score. The negative effect of high rh could be related to speck counts and soluble brown pigment content, while the positive effect of low temperature was not clear.Conclusions: The number of days with rh ≥ 80% diminished pasta color, while the number of days ≤13°C enhanced pasta color. Speck count, soluble brown pigment content, and semolina redness negatively affected pasta color, while yellow pigment content and semolina yellowness had a positive effect.Significance and novelty: Since weather cannot be controlled, this information will be helpful in selecting growing locations with more favorable climatic conditions to achieve better quality and pasta color traits. Understanding the relationships between climatic variables and quality traits will aid in developing cropping systems that favor high‐quality durum wheat.


  • Effect of hydration on physical grain quality of durum wheat

    by Patricia A. Cabas‐Lühmann, Frank A. Manthey

    Background and objectives: Movement of moisture into dry grain can cause the grain to take on a weathered, bleached appearance. Bleaching is a concern for durum producers since the grain price is often discounted. A series of experiments were conducted to determine the effect of grain moisture content, temperature, and wet/dry cycles with bulk water and with high relative humidity on the hydration of durum wheat (Triticum turgidum L. ssp. durum [Desf.] Husn.) grain and their effect on physical grain quality parameters related to bleaching.Findings: Water gain was greater for grain with low (13%) than high (17%) initial moisture content, which resulted in similar grain moisture contents (~30%) after 3 hr of soaking. At 24°C, there was more water uptake than at 5°C. Exposure to a single bulk water wet/dry cycle caused durum kernels to increase in width and caused a rough and wrinkled bran surface which resulted in a decline in test weight and vitreous kernel content and an increase in kernel size and brightness. A single high relative humidity event caused a reduction in vitreous kernel content and an increase in kernel size. Additional cycles of high relative humidity were needed to cause a reduction in test weight. Micrographs from scanning electron microscope and light microscope showed that the germ and ventral surface of grain were important sites for water absorption.Conclusions: Initial grain moisture, temperature, and wet/dry cycles affected water gain. A single exposure to moisture (bulk water or high relative humidity) was enough to cause a decline in physical grain quality.Significant and novelty: These data confirm anecdotal stories from durum producers that a single moisture event can cause bleaching and reduce grain quality and value.


  • Wet milling of deoxynivalenol‐contaminated wheat: Effect on physicochemical properties of starch

    by Ana M. Magallanes López, Frank A. Manthey, Senay Simsek

    Background and objectives: Deoxynivalenol (DON) is a water‐soluble mycotoxin that contaminates cereals, causing a negative economic impact on producers. Wet milling is a process that separates plant components based on chemistry (starch, gluten, lipid, and fiber), which can result in profitable products for the ingredients market. This research aimed to compare the effectiveness of three laboratory‐scale wet‐milling processes (Martin, medium shear, and high shear) on the extraction and functionality of starch from wheat samples containing DON.Findings: DON concentration in farina (3.0 mg/kg) and semolina (8.8 mg/kg) exceeded the security threshold for human consumption. After wet milling, DON was not detectable in the starch fraction. Starch produced from the medium shear process had significantly (p ≤ .05) lower protein contamination while transition temperatures significantly (p ≤ .05) decreased compared to the other two wet‐milling procedures. Martin process resulted in the method with the greatest starch damage and significantly (p ≤ .05) different thermal and pasting properties when compared to medium and high shear processes.Conclusions: The three laboratory‐scale wet‐milling processes were effective for obtaining starch free of DON. Depending on the wet‐milling process applied, differences were detected regarding physical damage of the granules, and the proportion of A and B granules which impacted the viscous and thermal properties.Significance and novelty: Wet milling provides a valuable alternative for the use of DON‐contaminated grain in the industrial production of wheat starch.


  • Flowability, wet agglomeration, and pasta processing properties of whole‐durum flour: Effect of direct single‐pass and multiple‐pass reconstituted milling systems

    by Lingzhu Deng, Frank A. Manthey

    Background and objectives: Flowability and wet agglomeration can affect pasta processing properties of whole‐wheat flour (WWF). Direct single‐pass and multi‐pass reconstituted milling are common methods to produce WWF. The flowability, wet agglomeration, and pasta processing properties of WWF were compared under these two systems where direct single‐pass system consisted of fine (24,000 g with 250 μm mill screen aperture) and coarse (15,400 g, 1,000 μm) grinds on an ultra‐centrifugal mill and the multiple‐pass reconstituted milling systems consisted of roller milling to produce semolina and bran and blending reground fine/coarse bran back to durum flour/semolina.Findings: Particle sizes were similar for direct fine grind WWF and multiple‐pass durum flour:fine bran and for direct coarse grind WWF and multiple‐pass semolina:coarse bran flour. Direct coarse grind and semolina:coarse bran had better flowing properties than direct fine grind and durum flour:fine bran. Wet agglomerates were smaller with coarsely ground semolina/bran than finely ground flour/bran. Specific mechanical energy needed to extrude semolina, durum flour:WWF doughs were similar and not affected by milling system.Conclusions: Flow and wet agglomeration properties of direct coarse grind and reconstituted WWF of semolina and coarse bran were better than those of finely ground WWF for whole‐wheat pasta production.Significance and novelty: This research adds to the limited information available concerning the impact of milling process on the flow, agglomeration, and pasta processing properties of WWF. This information is useful to pasta manufacturers when adjusting equipment involved in movement of raw ingredients and in pasta production.


  • Seed treatments affect milling properties and flour quality of black beans (Phaseolus vulgaris L.)

    by Claudia E. Carter, Frank A. Manthey

    Background and objectives: Black bean seed contains antinutritional factors that can be reduced or eliminated by seed treatments such as soaking and cooking. This study was carried out to determine the effect of cooked‐dried (cooking for 5–20 min; dried 50°C) and soaked‐dried (soaking for 6–24 hr; dried 50°C) treatments on the physical, milling, and flour qualities of black beans.Findings: Feed rate was reduced up to 31% and 25% by cooked‐dried and soaked‐dried treatments, respectively. The decline in feed rate was attributed to increased seed size and decreased seed weight caused by cooked‐dried or soaked‐dried processes. Force needed to fracture the black bean seed decreased for both cooked‐dried and soaked‐dried seeds as treatment time increased. Fine‐particle flour yield declined with seed treatment. Cooked‐dried treatment was found to have the greatest impact on starch damage. However, cooking and soaking had little or no effect on total starch, protein, and ash contents.Conclusions: Cooked‐dried and soaked‐dried treatments affected the size, weight, and fracture force of black bean seeds which subsequently affected milling and flour properties.Significance and novelty: Limited research has been published, concerning the effect of cooking and soaking pretreatments on milling quality of black beans. Cooked‐dried and soaked‐dried pretreatments caused physical change in grain that must be considered when milling black beans into flour.


  • Quality characteristics and protein composition of durum wheat cultivars released in the last 50 years

    by Maneka Malalgoda, Jae‐Bom Ohm, Frank A. Manthey, Elias M. Elias, Senay Simsek

    Background and objectives: Despite the strong influence of proteins on quality, no research has been performed to determine the association between protein composition and quality improvements of durum wheat produced in North Dakota (ND). This research objected to identify improvements of quality traits and determine its association with variations in protein composition using 32 durum genotypes released between 1956 and 2013 in ND.Findings: Certain durum quality parameters, such as kernel weight, mixing properties, and pasta‐making characteristics, improved over the last 50 years of durum breeding. Total protein content showed nonsignificant variation; however, protein composition parameters varied significantly. Specifically, SDS extractable LMW polymeric proteins and gliadins decreased while unextractable polymeric proteins increased. These changes in protein composition parameters were significantly correlated with dough and pasta cooking quality traits.Conclusions: Enhancement of protein composition is primarily responsible for the improvement of mixing quality and cooked pasta firmness seen in durum cultivars released over the last 50 years.Significance and novelty: These findings demonstrate that genetic advancement of mixing and pasta quality traits can be attained by segregation of genotypes based on protein composition in durum wheat breeding.