Yujian Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yujian Zhang has a total of 272 co-authors. Here are the top co-authors by number of shared publications:
- Cheng Zhang
International Sci. & Tech. Cooperation Base of Energy Materials and Application, College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, P. R. China
21 shared publications Yunxia Shen
Key Laboratory of the Ministry of Education for Advanced Catalysis Materials, Department of Chemistry, Zhejiang Normal University, Jinhua, PR China
15 shared publicationsCheng Zhang
College of Chemical Engineering Zhejiang University of Technology Chaowang Road No. 18 Hangzhou 310014 P. R. China
14 shared publicationsChunyan Lv
Department of Materials Chemistry, Huzhou University, Huzhou, PR China
14 shared publicationsMi Ouyang
College of Chemical Engineering Zhejiang University of Technology Chaowang Road No.18 Hangzhou 310014 P. R. China
14 shared publicationsQingbao Song
College of Chemical Engineering Zhejiang University of Technology No.18, Chaowang Road Hangzhou 310014 P. R. China
14 shared publications
Latest Publications
- 26 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (43) , 59142-59151
High-Extinction-Coefficient Donor Engineering Enables High-Performance Photothermal Cocrystals
Organic charge-transfer cocrystals have emerged as promising candidates for photothermal conversion, yet current design strategies predominantly focus on intermolecular charge-transfer interactions or nonradiative decay pathways, with less attention paid to the fundamental prerequisite of absorbance. Here, we propose a high-extinction-coefficient donor engineering strategy to boost photothermal conversion. A charge-transfer cocrystal (BNQ) was constructed from DtBuCzB—a donor with a high molar extinction coefficient (5.81 × 104 L mol–1 cm–1)—and the classical acceptor TCNQ. The BNQ cocrystal exhibits a well-ordered 2:1 alternating columnar packing structure with close π–π interactions and C–H···N hydrogen bonds, leading to a narrow optical bandgap of 1.04 eV and broad-spectrum absorption extending to 1198 nm. Under 808 nm laser irradiation, BNQ achieves an outstanding photothermal conversion efficiency of 95.1% and an ultrafast heating rate (130 °C within 10 s), substantially outperforming previously reported TCNQ-based cocrystals. As a practical demonstration, BNQ-incorporated polyurethane foam delivers an average solar-driven water evaporation rate of 1.84 ± 0.03 kg m–2 h–1 under 1-sun illumination with excellent operational stability. This work establishes donor extinction coefficient engineering as a simple yet powerful design strategy for developing next-generation photothermal cocrystals and provides a design parameter for the rational screening of component monomers.
- 26 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (43) , 59142-59151
High-Extinction-Coefficient Donor Engineering Enables High-Performance Photothermal Cocrystals
Organic charge-transfer cocrystals have emerged as promising candidates for photothermal conversion, yet current design strategies predominantly focus on intermolecular charge-transfer interactions or nonradiative decay pathways, with less attention paid to the fundamental prerequisite of absorbance. Here, we propose a high-extinction-coefficient donor engineering strategy to boost photothermal conversion. A charge-transfer cocrystal (BNQ) was constructed from DtBuCzB—a donor with a high molar extinction coefficient (5.81 × 104 L mol–1 cm–1)—and the classical acceptor TCNQ. The BNQ cocrystal exhibits a well-ordered 2:1 alternating columnar packing structure with close π–π interactions and C–H···N hydrogen bonds, leading to a narrow optical bandgap of 1.04 eV and broad-spectrum absorption extending to 1198 nm. Under 808 nm laser irradiation, BNQ achieves an outstanding photothermal conversion efficiency of 95.1% and an ultrafast heating rate (130 °C within 10 s), substantially outperforming previously reported TCNQ-based cocrystals. As a practical demonstration, BNQ-incorporated polyurethane foam delivers an average solar-driven water evaporation rate of 1.84 ± 0.03 kg m–2 h–1 under 1-sun illumination with excellent operational stability. This work establishes donor extinction coefficient engineering as a simple yet powerful design strategy for developing next-generation photothermal cocrystals and provides a design parameter for the rational screening of component monomers.
- Open Access
- 26 August 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Mechanical flexibility and pressure-activated emission in room-temperature phosphorescent organic crystals
The development of organic flexible materials with advanced functionalities, particularly those exhibiting stimuli-responsive photophysical behaviour, is crucial for next-generation intelligent photonic technologies. However, achieving mechanical flexibility and pressure-activated emission in room-temperature phosphorescent organic crystals remains a significant challenge. Here we show a crystal of 4,4’-sulfonylbis(bromobenzene) that exhibits both mechanical flexibility and a 4.8-fold enhancement of room-temperature phosphorescence under high pressure. Its elastic deformability originates from a folded molecular conformation stabilized by synergistic dipole–dipole and Br···Br interactions. The pressure-activated emission arises from the synergistic interplay of strengthened spin–orbit coupling and a reduced singlet–triplet energy gap, together with suppressed exciton–vibrational coupling. This work not only establishes a strategy of folded molecular geometry for designing organic crystals with mechanical flexibility and pressure-activated emission but also provides in-depth insight into how the proportion of 1(n, π*) character influences spin–orbit coupling coefficients.
- 26 August 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessMechanical flexibility and pressure-activated emission in room-temperature phosphorescent organic crystals
The development of organic flexible materials with advanced functionalities, particularly those exhibiting stimuli-responsive photophysical behaviour, is crucial for next-generation intelligent photonic technologies. However, achieving mechanical flexibility and pressure-activated emission in room-temperature phosphorescent organic crystals remains a significant challenge. Here we show a crystal of 4,4’-sulfonylbis(bromobenzene) that exhibits both mechanical flexibility and a 4.8-fold enhancement of room-temperature phosphorescence under high pressure. Its elastic deformability originates from a folded molecular conformation stabilized by synergistic dipole–dipole and Br···Br interactions. The pressure-activated emission arises from the synergistic interplay of strengthened spin–orbit coupling and a reduced singlet–triplet energy gap, together with suppressed exciton–vibrational coupling. This work not only establishes a strategy of folded molecular geometry for designing organic crystals with mechanical flexibility and pressure-activated emission but also provides in-depth insight into how the proportion of 1(n, π*) character influences spin–orbit coupling coefficients.
- Open Access
- 25 August 2026
- Published by Springer Nature in Research Square
Ultraviolet Persistent Luminescence in Purely Organic Systems
Purely organic luminescent materials exhibiting persistent luminescence (PersL) after photoexcitation have recently been developed and show great promise for future applications; however, ultraviolet PersL from metal-free organic molecules remains rare. Conventional phosphorescence and thermally activated delayed fluorescence, which proceed through the T 1 →S 0 and T 1 →S 1 →S 0 pathways, respectively, can readily generate PersL property; however, their intrinsically small energy gaps generally confine the resulting emission to the visible spectral region. Here, we report a “hot-exciton” strategy for achieving ultraviolet PersL at room temperature, in which reverse intersystem crossing (RISC) proceeds along the high-lying T n ( n ≥ 2) → S 1 →S 0 channel. Experimental proof is provided by the design and synthesis of a indolocarbazole derivatives, ICzO2 , featuring localized excitons and exhibiting a relatively high photoluminescence quantum yield (PLQY) of 41.6% in a doped film. Moreover, the doped film emits ultraviolet PersL with delayed fluorescence characteristic, characterized by two PL peaks at 390 and 370 nm and a lifetime of 1.01 s. The long-lived PersL is attributed to a hot-exciton pathway, where a moderate S 1 –T 2 energy gap of 0.42 eV facilitates slow RISC from T 2 to S 1 . This strategy open a new avenue for the development of ultraviolet PersL materials based on metal-free organic molecules.
- 25 August 2026
- Published by Springer Nature in Research Square
Open AccessUltraviolet Persistent Luminescence in Purely Organic Systems
Purely organic luminescent materials exhibiting persistent luminescence (PersL) after photoexcitation have recently been developed and show great promise for future applications; however, ultraviolet PersL from metal-free organic molecules remains rare. Conventional phosphorescence and thermally activated delayed fluorescence, which proceed through the T 1 →S 0 and T 1 →S 1 →S 0 pathways, respectively, can readily generate PersL property; however, their intrinsically small energy gaps generally confine the resulting emission to the visible spectral region. Here, we report a “hot-exciton” strategy for achieving ultraviolet PersL at room temperature, in which reverse intersystem crossing (RISC) proceeds along the high-lying T n ( n ≥ 2) → S 1 →S 0 channel. Experimental proof is provided by the design and synthesis of a indolocarbazole derivatives, ICzO2 , featuring localized excitons and exhibiting a relatively high photoluminescence quantum yield (PLQY) of 41.6% in a doped film. Moreover, the doped film emits ultraviolet PersL with delayed fluorescence characteristic, characterized by two PL peaks at 390 and 370 nm and a lifetime of 1.01 s. The long-lived PersL is attributed to a hot-exciton pathway, where a moderate S 1 –T 2 energy gap of 0.42 eV facilitates slow RISC from T 2 to S 1 . This strategy open a new avenue for the development of ultraviolet PersL materials based on metal-free organic molecules.
- Open Access
- 19 May 2026
- Published by Springer Nature in Light: Science & Applications
- Vol. 15 (1) , 240
Photoinduced radical emission from flexible organic crystals
Organic single crystals (OSCs) exhibiting excellent flexibility and unique optical properties are particularly promising for applications in optical/optoelectronic devices and sensors. Nevertheless, the fabrication of flexible OSCs with radical luminescence remains a major challenge, as most radicals are non-emissive in the condensed state. Here, we propose a photoactivated radical self-doping strategy to simultaneously achieve radical emission and flexibility in OSCs. By simple UV irradiation in air, the nearly non-emissive crystalline naphthyl benzoate derivative ( NPBr ) produces intense blue fluorescence with a high solid-state photoluminescence quantum yield (PLQY) of 47.7%, representing a remarkable 60-fold enhancement from its initial value of 0.8%. The combined experimental and theoretical analyses reveal that the observed luminescence arises from trace oxygen-centered radical species, which are generated via the photodissociation of NPBr and stabilized by the spatial confinement of the crystalline matrix. Moreover, the synergistic effects of hydrogen bonding, halogen interactions, and π-π stacking endow the resulting crystal with high elasticity and bendability under external stress, as evidenced by Young’s modulus of ~9.76 GPa. Notably, this photodissociation process achieves two objectives concurrently: yielding stable oxygen radicals and preserving the intrinsic crystal flexibility, thereby enabling the crystal to function as a flexible optical waveguide with low loss coefficients of 0.584 and 0.806 dB mm −1 for the straight and bent states, respectively. This proposed strategy is conceptually innovative and operationally straightforward, offering a universal route for designing flexible OSCs with radical luminescence.
- 19 May 2026
- Published by Springer Nature in Light: Science & Applications
- Vol. 15 (1) , 240
Open AccessPhotoinduced radical emission from flexible organic crystals
Organic single crystals (OSCs) exhibiting excellent flexibility and unique optical properties are particularly promising for applications in optical/optoelectronic devices and sensors. Nevertheless, the fabrication of flexible OSCs with radical luminescence remains a major challenge, as most radicals are non-emissive in the condensed state. Here, we propose a photoactivated radical self-doping strategy to simultaneously achieve radical emission and flexibility in OSCs. By simple UV irradiation in air, the nearly non-emissive crystalline naphthyl benzoate derivative ( NPBr ) produces intense blue fluorescence with a high solid-state photoluminescence quantum yield (PLQY) of 47.7%, representing a remarkable 60-fold enhancement from its initial value of 0.8%. The combined experimental and theoretical analyses reveal that the observed luminescence arises from trace oxygen-centered radical species, which are generated via the photodissociation of NPBr and stabilized by the spatial confinement of the crystalline matrix. Moreover, the synergistic effects of hydrogen bonding, halogen interactions, and π-π stacking endow the resulting crystal with high elasticity and bendability under external stress, as evidenced by Young’s modulus of ~9.76 GPa. Notably, this photodissociation process achieves two objectives concurrently: yielding stable oxygen radicals and preserving the intrinsic crystal flexibility, thereby enabling the crystal to function as a flexible optical waveguide with low loss coefficients of 0.584 and 0.806 dB mm −1 for the straight and bent states, respectively. This proposed strategy is conceptually innovative and operationally straightforward, offering a universal route for designing flexible OSCs with radical luminescence.
- 22 April 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (23)
Flexible Organic Radical Cocrystal With 94% Photothermal Conversion Efficiency
Flexible photothermal materials made of particulate carbon, metal, polymer, or semiconductors often suffer from interfacial incompatibility, leading to cracking and delamination over prolonged use. These limitations make it difficult for flexible composite materials to simultaneously meet the requirements of long‐term interfacial stability and high photothermal performance. Here we circumvented these persistent challenges by using flexible organic crystals, where the absorber is a structurally homogeneous radical cocrystal and strong light absorption is accomplished by charge transfer (CT) between two molecular components. We cocrystallized electron donor perylene (PE) and acceptor naphthalene diimide (NDI) to prepare mechanically flexible, centimeter‐size cocrystals (PE‐NDI), which demonstrate persistent radical characteristics with a spin coherence time of 2.1 µs. Prominent donor–acceptor interaction (−87.7 kJ mol −1 ) facilitates strong light absorption from 200 to 780 nm, while hydrogen bonds are thought to account for the reversible elastic bending. Excitation at 685 nm yields an extraordinarily high photothermal conversion efficiency of 94%. Integration of PE‐NDI in a thermoelectric generator enabled direct solar energy harvesting via a photo‐thermo‐electric conversion sequence, demonstrating the potential of flexible cocrystals for renewable energy harvesting. This work highlights the untapped potential of mechanically compliant organic crystals as flexible, single‐component, lightweight photothermal materials.
- 22 April 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (23)
Flexible Organic Radical Cocrystal With 94% Photothermal Conversion Efficiency
Flexible photothermal materials made of particulate carbon, metal, polymer, or semiconductors often suffer from interfacial incompatibility, leading to cracking and delamination over prolonged use. These limitations make it difficult for flexible composite materials to simultaneously meet the requirements of long‐term interfacial stability and high photothermal performance. Here we circumvented these persistent challenges by using flexible organic crystals, where the absorber is a structurally homogeneous radical cocrystal and strong light absorption is accomplished by charge transfer (CT) between two molecular components. We cocrystallized electron donor perylene (PE) and acceptor naphthalene diimide (NDI) to prepare mechanically flexible, centimeter‐size cocrystals (PE‐NDI), which demonstrate persistent radical characteristics with a spin coherence time of 2.1 µs. Prominent donor–acceptor interaction (−87.7 kJ mol −1 ) facilitates strong light absorption from 200 to 780 nm, while hydrogen bonds are thought to account for the reversible elastic bending. Excitation at 685 nm yields an extraordinarily high photothermal conversion efficiency of 94%. Integration of PE‐NDI in a thermoelectric generator enabled direct solar energy harvesting via a photo‐thermo‐electric conversion sequence, demonstrating the potential of flexible cocrystals for renewable energy harvesting. This work highlights the untapped potential of mechanically compliant organic crystals as flexible, single‐component, lightweight photothermal materials.
- 22 April 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (23) , e1702104
Flexible Organic Radical Cocrystal With 94% Photothermal Conversion Efficiency
Flexible photothermal materials made of particulate carbon, metal, polymer, or semiconductors often suffer from interfacial incompatibility, leading to cracking and delamination over prolonged use. These limitations make it difficult for flexible composite materials to simultaneously meet the requirements of long‐term interfacial stability and high photothermal performance. Here we circumvented these persistent challenges by using flexible organic crystals, where the absorber is a structurally homogeneous radical cocrystal and strong light absorption is accomplished by charge transfer (CT) between two molecular components. We cocrystallized electron donor perylene (PE) and acceptor naphthalene diimide (NDI) to prepare mechanically flexible, centimeter‐size cocrystals (PE‐NDI), which demonstrate persistent radical characteristics with a spin coherence time of 2.1 µs. Prominent donor–acceptor interaction (−87.7 kJ mol −1 ) facilitates strong light absorption from 200 to 780 nm, while hydrogen bonds are thought to account for the reversible elastic bending. Excitation at 685 nm yields an extraordinarily high photothermal conversion efficiency of 94%. Integration of PE‐NDI in a thermoelectric generator enabled direct solar energy harvesting via a photo‐thermo‐electric conversion sequence, demonstrating the potential of flexible cocrystals for renewable energy harvesting. This work highlights the untapped potential of mechanically compliant organic crystals as flexible, single‐component, lightweight photothermal materials.
- 22 April 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (23) , e1702104
Flexible Organic Radical Cocrystal With 94% Photothermal Conversion Efficiency
Flexible photothermal materials made of particulate carbon, metal, polymer, or semiconductors often suffer from interfacial incompatibility, leading to cracking and delamination over prolonged use. These limitations make it difficult for flexible composite materials to simultaneously meet the requirements of long‐term interfacial stability and high photothermal performance. Here we circumvented these persistent challenges by using flexible organic crystals, where the absorber is a structurally homogeneous radical cocrystal and strong light absorption is accomplished by charge transfer (CT) between two molecular components. We cocrystallized electron donor perylene (PE) and acceptor naphthalene diimide (NDI) to prepare mechanically flexible, centimeter‐size cocrystals (PE‐NDI), which demonstrate persistent radical characteristics with a spin coherence time of 2.1 µs. Prominent donor–acceptor interaction (−87.7 kJ mol −1 ) facilitates strong light absorption from 200 to 780 nm, while hydrogen bonds are thought to account for the reversible elastic bending. Excitation at 685 nm yields an extraordinarily high photothermal conversion efficiency of 94%. Integration of PE‐NDI in a thermoelectric generator enabled direct solar energy harvesting via a photo‐thermo‐electric conversion sequence, demonstrating the potential of flexible cocrystals for renewable energy harvesting. This work highlights the untapped potential of mechanically compliant organic crystals as flexible, single‐component, lightweight photothermal materials.
- 29 December 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (1) , 847-856
Synergistic Modulation of Multimodal Luminescence in Self-Activated Phosphors for Advanced Anticounterfeiting and X-ray Imaging
Self-activated luminescent materials, characterized by low-cost and industrial-scale manufacturability, have demonstrated significant potential in anticounterfeiting and X-ray imaging applications. However, their development is hindered by a single emission response mode and low scintillation luminescence intensity. In this work, we demonstrate that the self-activated CaGa4O7 (CGO) matrix with excellent defect tolerance exhibits three response modes (persistent luminescence (PersL), photochromism, and time-dependent luminescence) and X-ray excited luminescence properties. Then, we adopt lone-pair Pb2+ cations with a larger ionic size to substitute Ca2+ (CGO:Pb2+), which causes a contrasting change in the concentrations of the two defect types and enables synergistic modulation of the PersL decay time, the degree of photochromism, and the variation rate of time-dependent luminescence, outperforming currently reported self-activated luminescent materials. Furthermore, the incorporation of Pb2+ enhances X-ray absorption efficiency, yielding a 4-fold increase in X-ray excited luminescence intensity compared with pristine CGO, demonstrating high sensitivity in detecting tissue structures. These findings establish CGO:Pb2+ as a promising candidate for dual anticounterfeiting and X-ray imaging applications, providing fundamental design principles for developing advanced self-activated luminescent materials and paving the way for multifunctional optical applications.
- 29 December 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (1) , 847-856
Synergistic Modulation of Multimodal Luminescence in Self-Activated Phosphors for Advanced Anticounterfeiting and X-ray Imaging
Self-activated luminescent materials, characterized by low-cost and industrial-scale manufacturability, have demonstrated significant potential in anticounterfeiting and X-ray imaging applications. However, their development is hindered by a single emission response mode and low scintillation luminescence intensity. In this work, we demonstrate that the self-activated CaGa4O7 (CGO) matrix with excellent defect tolerance exhibits three response modes (persistent luminescence (PersL), photochromism, and time-dependent luminescence) and X-ray excited luminescence properties. Then, we adopt lone-pair Pb2+ cations with a larger ionic size to substitute Ca2+ (CGO:Pb2+), which causes a contrasting change in the concentrations of the two defect types and enables synergistic modulation of the PersL decay time, the degree of photochromism, and the variation rate of time-dependent luminescence, outperforming currently reported self-activated luminescent materials. Furthermore, the incorporation of Pb2+ enhances X-ray absorption efficiency, yielding a 4-fold increase in X-ray excited luminescence intensity compared with pristine CGO, demonstrating high sensitivity in detecting tissue structures. These findings establish CGO:Pb2+ as a promising candidate for dual anticounterfeiting and X-ray imaging applications, providing fundamental design principles for developing advanced self-activated luminescent materials and paving the way for multifunctional optical applications.
- 12 December 2025
- Published by Wiley in Angewandte Chemie
Pressure‐Driven Photoluminescence Spectral Narrowing in X‐Aggregates Dye via Self‐Absorption Effect
Piezochromic materials typically exhibit spectral broadening and photoluminescence (PL) quenching, largely due to the formation of multiple emissive species and non‐radiative states. Achieving pressure‐induced spectral narrowing in organic systems, however, remains elusive. Herein, we report the first observation of pressure‐driven PL spectral narrowing in ZPH crystals, a multi‐resonant emitter featuring B/N‐skeletons and characterized by an X‐aggregate packing motif and strong absorption‐PL spectral overlap. Under hydrostatic pressure, the absorption‐PL spectral overlap markedly increases. This enhanced spectral overlap intensifies the self‐absorption effect, thereby diminishing the intensity of the main PL peak. Concurrently, below 8.93 GPa, the exciton coupling of X‐aggregates is slightly weakened, resulting in an enhancement of the PL shoulder peak. The opposing intensity changes of these dual peaks, attributable to the combined effects of intensified self‐absorption and weakened X‐aggregate exciton coupling, collectively lead to the observed pressure‐induced spectral narrowing. This work establishes a counterintuitive strategy by leveraging self‐absorption for spectral control, thereby advancing our understanding of how the self‐absorption influences photophysical properties.
- 12 December 2025
- Published by Wiley in Angewandte Chemie
Pressure‐Driven Photoluminescence Spectral Narrowing in X‐Aggregates Dye via Self‐Absorption Effect
Piezochromic materials typically exhibit spectral broadening and photoluminescence (PL) quenching, largely due to the formation of multiple emissive species and non‐radiative states. Achieving pressure‐induced spectral narrowing in organic systems, however, remains elusive. Herein, we report the first observation of pressure‐driven PL spectral narrowing in ZPH crystals, a multi‐resonant emitter featuring B/N‐skeletons and characterized by an X‐aggregate packing motif and strong absorption‐PL spectral overlap. Under hydrostatic pressure, the absorption‐PL spectral overlap markedly increases. This enhanced spectral overlap intensifies the self‐absorption effect, thereby diminishing the intensity of the main PL peak. Concurrently, below 8.93 GPa, the exciton coupling of X‐aggregates is slightly weakened, resulting in an enhancement of the PL shoulder peak. The opposing intensity changes of these dual peaks, attributable to the combined effects of intensified self‐absorption and weakened X‐aggregate exciton coupling, collectively lead to the observed pressure‐induced spectral narrowing. This work establishes a counterintuitive strategy by leveraging self‐absorption for spectral control, thereby advancing our understanding of how the self‐absorption influences photophysical properties.
- 12 December 2025
- Published by Wiley in Angewandte Chemie International Edition
- p. e24841
Pressure‐Driven Photoluminescence Spectral Narrowing in X‐Aggregates Dye via Self‐Absorption Effect
Piezochromic materials typically exhibit spectral broadening and photoluminescence (PL) quenching, largely due to the formation of multiple emissive species and non‐radiative states. Achieving pressure‐induced spectral narrowing in organic systems, however, remains elusive. Herein, we report the first observation of pressure‐driven PL spectral narrowing in ZPH crystals, a multi‐resonant emitter featuring B/N‐skeletons and characterized by an X‐aggregate packing motif and strong absorption‐PL spectral overlap. Under hydrostatic pressure, the absorption‐PL spectral overlap markedly increases. This enhanced spectral overlap intensifies the self‐absorption effect, thereby diminishing the intensity of the main PL peak. Concurrently, below 8.93 GPa, the exciton coupling of X‐aggregates is slightly weakened, resulting in an enhancement of the PL shoulder peak. The opposing intensity changes of these dual peaks, attributable to the combined effects of intensified self‐absorption and weakened X‐aggregate exciton coupling, collectively lead to the observed pressure‐induced spectral narrowing. This work establishes a counterintuitive strategy by leveraging self‐absorption for spectral control, thereby advancing our understanding of how the self‐absorption influences photophysical properties.
- 12 December 2025
- Published by Wiley in Angewandte Chemie International Edition
- p. e24841
Pressure‐Driven Photoluminescence Spectral Narrowing in X‐Aggregates Dye via Self‐Absorption Effect
Piezochromic materials typically exhibit spectral broadening and photoluminescence (PL) quenching, largely due to the formation of multiple emissive species and non‐radiative states. Achieving pressure‐induced spectral narrowing in organic systems, however, remains elusive. Herein, we report the first observation of pressure‐driven PL spectral narrowing in ZPH crystals, a multi‐resonant emitter featuring B/N‐skeletons and characterized by an X‐aggregate packing motif and strong absorption‐PL spectral overlap. Under hydrostatic pressure, the absorption‐PL spectral overlap markedly increases. This enhanced spectral overlap intensifies the self‐absorption effect, thereby diminishing the intensity of the main PL peak. Concurrently, below 8.93 GPa, the exciton coupling of X‐aggregates is slightly weakened, resulting in an enhancement of the PL shoulder peak. The opposing intensity changes of these dual peaks, attributable to the combined effects of intensified self‐absorption and weakened X‐aggregate exciton coupling, collectively lead to the observed pressure‐induced spectral narrowing. This work establishes a counterintuitive strategy by leveraging self‐absorption for spectral control, thereby advancing our understanding of how the self‐absorption influences photophysical properties.
- Open Access
- 21 April 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 16 (21) , 9169-9177
Tuning intramolecular charge transfer and suppressing rotations in thianthrene derivatives for enhancement of room-temperature phosphorescence
A synergistic strategy was proposed to promote n–π* transitions, provide charge-transfer (CT) intermediates and inhibit intramolecular motions to achieve efficient ORTP based on thianthrene (TA) derivatives.
- 21 April 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 16 (21) , 9169-9177
Open AccessTuning intramolecular charge transfer and suppressing rotations in thianthrene derivatives for enhancement of room-temperature phosphorescence
A synergistic strategy was proposed to promote n–π* transitions, provide charge-transfer (CT) intermediates and inhibit intramolecular motions to achieve efficient ORTP based on thianthrene (TA) derivatives.