Jamshid Fooladi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jamshid Fooladi has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Ali Reza Mirzaei
Department of Biotechnology, Faculty of Biological Sciences, Alzahra University, Tehran, Iran
2 shared publications A Sajjadian
1 shared publicationAliakbar Haddad-Mashadrizeh
Cell and Molecular Biotechnology Research Group, Institute of Biotechnology, Ferdowsi University of Mashhad, Mashhad, Iran; Department of Biology, Faculty of Science, Ferdowsi University of Mashhad, Mashhad, Iran
1 shared publication- Bahman Fazeli-Nasab
University of Zabol
1 shared publication - Bahman Fazeli-Nasab
Department of Agronomy and Plant Breeding, Agriculture Institute, Research Institute of Zabol, Zabol, Iran
1 shared publication - Christoph Syldatk
KIT - Karlsruhe Institute of Technology
1 shared publication
Latest Publications
- Open Access
- 20 May 2026
- Published by Springer Nature in BMC Plant Biology
- Vol. 26 (1) , 896
Assessment of the effect of paclobutrazol treatment on the activity of genes related to flavonoid synthesis in Brassica napus under salt stress conditions
The samples were under the influence of the treatment with pyrrolizine. Salinity adversely impacts oilseed production by leading to excessive salt accumulation and degrading soil structure. In rapeseed, salinity specifically hinders germination and the growth of aerial organs while also reducing the production of flavonoids and anthocyanins. Recent research has demonstrated that paclobutrazol treatment can enhance cellular activities under environmental stress. Accordingly, this study investigated the effects of paclobutrazol on the molecular mechanisms related to the synthesis of flavonoids, as one of the most important natural polyphenolic compounds. In this study, after applying salinity stress, the samples were under the influence of the treatment with paclobutrazol. The results of the expression evaluation of flavonoid synthesis-related genes production (MYB111 and MYB12) showed that paclobutrazol treatment had a significant effect on increasing the expression of these genes. The findings of this study also indicated that paclobutrazol treatment, in addition to reducing the negative effects of salinity, significantly increased the production of anthocyanins and the growth of plant aerial organs. MDA measures membrane damage from stress. SOD and POD are key antioxidant enzymes that protect plant cells from oxidative harm. Bioinformatics analyses of this study also showed that MYB111 and MYB12 genes have negative hydropathicity while interacting with a network of genes and transcription factors. These findings indicate that these genes, in addition to creating resistance to salinity stress, are also effective in reducing the effects of drought stress. This study's results indicate that applying paclobutrazol to oilseeds effectively prevents damage from salinity stress and reduces sodium ion accumulation in the plant structure.
- 20 May 2026
- Published by Springer Nature in BMC Plant Biology
- Vol. 26 (1) , 896
Open AccessAssessment of the effect of paclobutrazol treatment on the activity of genes related to flavonoid synthesis in Brassica napus under salt stress conditions
The samples were under the influence of the treatment with pyrrolizine. Salinity adversely impacts oilseed production by leading to excessive salt accumulation and degrading soil structure. In rapeseed, salinity specifically hinders germination and the growth of aerial organs while also reducing the production of flavonoids and anthocyanins. Recent research has demonstrated that paclobutrazol treatment can enhance cellular activities under environmental stress. Accordingly, this study investigated the effects of paclobutrazol on the molecular mechanisms related to the synthesis of flavonoids, as one of the most important natural polyphenolic compounds. In this study, after applying salinity stress, the samples were under the influence of the treatment with paclobutrazol. The results of the expression evaluation of flavonoid synthesis-related genes production (MYB111 and MYB12) showed that paclobutrazol treatment had a significant effect on increasing the expression of these genes. The findings of this study also indicated that paclobutrazol treatment, in addition to reducing the negative effects of salinity, significantly increased the production of anthocyanins and the growth of plant aerial organs. MDA measures membrane damage from stress. SOD and POD are key antioxidant enzymes that protect plant cells from oxidative harm. Bioinformatics analyses of this study also showed that MYB111 and MYB12 genes have negative hydropathicity while interacting with a network of genes and transcription factors. These findings indicate that these genes, in addition to creating resistance to salinity stress, are also effective in reducing the effects of drought stress. This study's results indicate that applying paclobutrazol to oilseeds effectively prevents damage from salinity stress and reduces sodium ion accumulation in the plant structure.
- 1 July 2025
- Published by Springer Nature in Functional & Integrative Genomics
- Vol. 25 (1) , 1-11
Bioinformatics analysis and expression of the transcription factor MYC2 in Brassica napus in response to salt stress
Salt stress is a significant factor limiting plant growth and can severely reduce crop yields. In addition to causing physiological damage, salt stress disrupts the plant’s internal balance and hinders nutrient absorption. However, plants have developed various responses to combat this stress. This study focuses on one critical gene associated with the jasmonic acid pathway, known as BnMYC2, which plays an important role in enhancing salt resistance. The BnMYC2 gene activates downstream genes by binding to specific cis-acting element regions, thereby contributing to the plant’s ability to withstand salt stress. We investigated the expression of the BnMYC2 gene in the roots, stems, and leaves of the Licord cultivar under salt stress. The experiment was designed completely randomly, with three replications. Our results indicate that BnMYC2 gene expression is higher in the roots compared to the stems and leaves. Notably, the expression level of the BnMYC2 gene peaked in the roots 12 h after the application of salt stress before subsequently decreasing. Bioinformatics analysis revealed that the BnMYC2 gene shares phylogenetic similarities with 16 genes in Arabidopsis thaliana and 8 genes in Glycine max. Additionally, the expression profile of the MYC2 gene in A. thaliana is 72.22% similar to that in the G. max genome. Overall, this research not only highlights the role of the MYC2 gene in salt tolerance but also provides valuable insights into the evolutionary aspects of the BnMYC2 gene, which can be beneficial for future studies related to genome analysis.
- 1 July 2025
- Published by Springer Nature in Functional & Integrative Genomics
- Vol. 25 (1) , 1-11
Bioinformatics analysis and expression of the transcription factor MYC2 in Brassica napus in response to salt stress
Salt stress is a significant factor limiting plant growth and can severely reduce crop yields. In addition to causing physiological damage, salt stress disrupts the plant’s internal balance and hinders nutrient absorption. However, plants have developed various responses to combat this stress. This study focuses on one critical gene associated with the jasmonic acid pathway, known as BnMYC2, which plays an important role in enhancing salt resistance. The BnMYC2 gene activates downstream genes by binding to specific cis-acting element regions, thereby contributing to the plant’s ability to withstand salt stress. We investigated the expression of the BnMYC2 gene in the roots, stems, and leaves of the Licord cultivar under salt stress. The experiment was designed completely randomly, with three replications. Our results indicate that BnMYC2 gene expression is higher in the roots compared to the stems and leaves. Notably, the expression level of the BnMYC2 gene peaked in the roots 12 h after the application of salt stress before subsequently decreasing. Bioinformatics analysis revealed that the BnMYC2 gene shares phylogenetic similarities with 16 genes in Arabidopsis thaliana and 8 genes in Glycine max. Additionally, the expression profile of the MYC2 gene in A. thaliana is 72.22% similar to that in the G. max genome. Overall, this research not only highlights the role of the MYC2 gene in salt tolerance but also provides valuable insights into the evolutionary aspects of the BnMYC2 gene, which can be beneficial for future studies related to genome analysis.
- Open Access
- 18 January 2024
- Published by MDPI AG in Applied Microbiology
- Vol. 4 (1) , 215-236
Toward Effects of Hydrophobicity on Biosurfactant Production by Bacillus subtilis Isolates from Crude-Oil-Exposed Environments
Background: Due to their structural features, biosurfactants reveal promising physicochemical properties, making them interesting for various applications in different fields, such as the food, cosmetics, agriculture, and bioremediation sectors. In particular, the bioproduction of surfactin, one of the most potent microbially synthesized biosurfactant molecules, is of great interest. However, since the wild-type productivities are comparably low, stimulatory environmental conditions have to be identified for improved bioproduction This study aims to find a correlation between the hydrophobicity and production of the biosurfactant surfactin by B. subtilis isolates from crude-oil-contaminated soil and water. Methods: The surfactin production yield was characterized in adapted batch cultivations using high-performance thin-layer liquid chromatography (HPTLC). Defined hydrophobic environmental conditions were achieved by supplementation with hexadecane or polystyrene beads, and the effects on biosurfactant production were measured. Adaptations at the protein level were analyzed using mass spectrometry measurements. Results: The correlation between hydrophobicity and surfactin production was characterized using Bacillus subtilis strains ZH1 and P7 isolated from crude-oil-contaminated soil and water. Since these isolates show the biodegradation of crude oil and hexadecane as hydrophobic substrates, respectively, a first-time approach, using polystyrene beads, was applied to provide a hydrophobic environment. Interestingly, contrary to popular opinion, reduced biosurfactant production was determined. Using mass spectrometric approaches, the physiological effects of co-cultivation and the cellular response at the protein level were investigated, resulting in altered quantities of stress proteins and proteins involved in the carbon metabolism counter to polystyrene beads. Conclusions: Contrary to common opinion, increasing hydrophobicity does not have a stimulating effect, and even reduces the effect on the bioproduction of surfactin as the main biosurfactant using selected B. subtilis strains.
- 18 January 2024
- Published by MDPI AG in Applied Microbiology
- Vol. 4 (1) , 215-236
Open AccessToward Effects of Hydrophobicity on Biosurfactant Production by Bacillus subtilis Isolates from Crude-Oil-Exposed Environments
Background: Due to their structural features, biosurfactants reveal promising physicochemical properties, making them interesting for various applications in different fields, such as the food, cosmetics, agriculture, and bioremediation sectors. In particular, the bioproduction of surfactin, one of the most potent microbially synthesized biosurfactant molecules, is of great interest. However, since the wild-type productivities are comparably low, stimulatory environmental conditions have to be identified for improved bioproduction This study aims to find a correlation between the hydrophobicity and production of the biosurfactant surfactin by B. subtilis isolates from crude-oil-contaminated soil and water. Methods: The surfactin production yield was characterized in adapted batch cultivations using high-performance thin-layer liquid chromatography (HPTLC). Defined hydrophobic environmental conditions were achieved by supplementation with hexadecane or polystyrene beads, and the effects on biosurfactant production were measured. Adaptations at the protein level were analyzed using mass spectrometry measurements. Results: The correlation between hydrophobicity and surfactin production was characterized using Bacillus subtilis strains ZH1 and P7 isolated from crude-oil-contaminated soil and water. Since these isolates show the biodegradation of crude oil and hexadecane as hydrophobic substrates, respectively, a first-time approach, using polystyrene beads, was applied to provide a hydrophobic environment. Interestingly, contrary to popular opinion, reduced biosurfactant production was determined. Using mass spectrometric approaches, the physiological effects of co-cultivation and the cellular response at the protein level were investigated, resulting in altered quantities of stress proteins and proteins involved in the carbon metabolism counter to polystyrene beads. Conclusions: Contrary to common opinion, increasing hydrophobicity does not have a stimulating effect, and even reduces the effect on the bioproduction of surfactin as the main biosurfactant using selected B. subtilis strains.
- Open Access
- 1 December 2021
- Vol. 19 (1) , 96-105
Lipid Production Capacity of a Newly Characterized Cyanobacterial Strain Synechocystis sp. MH01: A Comparative Performance Evaluation of Cyanobacterial Lipid-Based Biodiesel
Background: Cyanobacteria have been the focus of extensive researches because of their high potential for the development of new generations of useful natural compounds with vast applications. For the entire last ten years, a lot of attention has been dedicated to the cyanobacterial lipids as a main source of valuable materials for clean energy production. Objectives: As there is a direct relationship between biofuel properties and compositional characteristics of fatty acids, a selected lipid-producing cyanobacterial strain was examined and analyzed in terms of fatty acid composition. The biodiesel quality parameters were carefully examined as well. Materials and Methods: A cyanobacterial strain was isolated from waterfalls in the northern part of Iran and identified as Synechocystis sp. MH01. The fatty acids profile of the selected strain, as tested in various culture conditions, was analyzed by gas chromatography (GC) and compared with control subjects to further validating the biodiesel quality parameters. Results: The autotrophic cultivation of Synechocystis sp. MH01 resulted in biomass and lipid productivity of 109 mg.L-1 day-1 and 22.89 mg.L-1day-1, respectively. The mixotrophic cultivation of MH01 strain in sucrose-containing medium led to an approximately 1.8 and 1.22 fold increase in biomass and lipid productivity compared with the autotrophic condition. The addition of glycine to BG11 medium caused up to ~1.3 and ~1.18 fold increase in biomass and lipid productivity compared with control subjects. The analysis of qualitative parameters of the biodiesel, as derived from the lipids, indicated that Synechocystis sp. MH01 has a high ability for lipid production under optimal culture conditions. Conclusions: It seems feasible to evolve the Synechocystis sp. MH01 further particularly for more lipid production as a promising primary raw material for biofuel production through fine-tuning of medium composition.
- 1 December 2021
- Vol. 19 (1) , 96-105
Open AccessLipid Production Capacity of a Newly Characterized Cyanobacterial Strain Synechocystis sp. MH01: A Comparative Performance Evaluation of Cyanobacterial Lipid-Based Biodiesel
Background: Cyanobacteria have been the focus of extensive researches because of their high potential for the development of new generations of useful natural compounds with vast applications. For the entire last ten years, a lot of attention has been dedicated to the cyanobacterial lipids as a main source of valuable materials for clean energy production. Objectives: As there is a direct relationship between biofuel properties and compositional characteristics of fatty acids, a selected lipid-producing cyanobacterial strain was examined and analyzed in terms of fatty acid composition. The biodiesel quality parameters were carefully examined as well. Materials and Methods: A cyanobacterial strain was isolated from waterfalls in the northern part of Iran and identified as Synechocystis sp. MH01. The fatty acids profile of the selected strain, as tested in various culture conditions, was analyzed by gas chromatography (GC) and compared with control subjects to further validating the biodiesel quality parameters. Results: The autotrophic cultivation of Synechocystis sp. MH01 resulted in biomass and lipid productivity of 109 mg.L-1 day-1 and 22.89 mg.L-1day-1, respectively. The mixotrophic cultivation of MH01 strain in sucrose-containing medium led to an approximately 1.8 and 1.22 fold increase in biomass and lipid productivity compared with the autotrophic condition. The addition of glycine to BG11 medium caused up to ~1.3 and ~1.18 fold increase in biomass and lipid productivity compared with control subjects. The analysis of qualitative parameters of the biodiesel, as derived from the lipids, indicated that Synechocystis sp. MH01 has a high ability for lipid production under optimal culture conditions. Conclusions: It seems feasible to evolve the Synechocystis sp. MH01 further particularly for more lipid production as a promising primary raw material for biofuel production through fine-tuning of medium composition.
- Open Access
Screening and Comparative Characterization of Microorganisms from Iranian Soil Samples Showing ω-Transaminase Activity toward a Plethora of Substrates
In this study, soil microorganisms from Iran were screened for ω-transaminase (ω-TA) activity based on growth on minimal media containing (rac)-α-methylbenzylamine (rac-α-MBA) as a sole nitrogen source. Then, for the selection of strains with high enzyme activity, a colorimetric o-xylylendiamine assay was conducted. The most promising strains were identified by 16S rDNA sequencing. Five microorganisms showing high ω-TA activity were subjected to determine optimal conditions for ω-TA activity, including pH, temperature, co-solvent, and the specificity of the ω-TA toward different amine donors and acceptors. Among the five screened microorganisms, Bacillus halotolerans turned out to be the most promising strain: Its cell-free extract showed a highly versatile amino donor spectrum toward aliphatic, aromatic chiral amines and a broad range of pH activity. Transaminase activity also exhibited excellent solvent tolerance, with maximum turnover in the presence of 30% (v/v) DMSO.
Open AccessScreening and Comparative Characterization of Microorganisms from Iranian Soil Samples Showing ω-Transaminase Activity toward a Plethora of Substrates
In this study, soil microorganisms from Iran were screened for ω-transaminase (ω-TA) activity based on growth on minimal media containing (rac)-α-methylbenzylamine (rac-α-MBA) as a sole nitrogen source. Then, for the selection of strains with high enzyme activity, a colorimetric o-xylylendiamine assay was conducted. The most promising strains were identified by 16S rDNA sequencing. Five microorganisms showing high ω-TA activity were subjected to determine optimal conditions for ω-TA activity, including pH, temperature, co-solvent, and the specificity of the ω-TA toward different amine donors and acceptors. Among the five screened microorganisms, Bacillus halotolerans turned out to be the most promising strain: Its cell-free extract showed a highly versatile amino donor spectrum toward aliphatic, aromatic chiral amines and a broad range of pH activity. Transaminase activity also exhibited excellent solvent tolerance, with maximum turnover in the presence of 30% (v/v) DMSO.
- 1 February 2019
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 122, 914-923
Molecular mechanism of enzyme tolerance against organic solvents: Insights from molecular dynamics simulation
- 1 February 2019
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 122, 914-923
Molecular mechanism of enzyme tolerance against organic solvents: Insights from molecular dynamics simulation
- 25 January 2019
- Published by Springer Nature in Folia Microbiologica
- Vol. 64 (4) , 471-479
Introducing a thermotolerant Gluconobacter japonicus strain, potentially useful for coenzyme Q10 production
In this report, Gluconobacter strains were screened for coenzyme Q10 (CoQ10) production. A thermotolerant strain, Gluconobacter japonicus FM10, was eventually employed for CoQ10 production optimization. To do so, a two-step optimization strategy was used. The first step focused on biomass increase and the second step focused on increase in CoQ10 production. Factors including temperature, pH, carbon, and nitrogen sources were optimized at the first step, and temperature, pH, and aeration were optimized at the second step. The batch culture fermentation was used with the optimized factors of the first phase (30 °C, pH 6.5, D-sorbitol, and yeast extract-peptone as the carbon and nitrogen sources). After 18 h, the temperature, pH, and aeration were shifted to the optimized values of the second step (36 °C, pH 7, and no aeration). By this strategy, the dry cell mass (17.1 g/L) and CoQ10 (23.2 mg/L) were obtained after 20 h, which the latter was 2.3 times higher than that of the first step of optimization. Among the conditions tested, carbon source was the most important factor on the cell growth at the first step while no aeration was the key factor for CoQ10 production in the second step of optimization.
- 25 January 2019
- Published by Springer Nature in Folia Microbiologica
- Vol. 64 (4) , 471-479
Introducing a thermotolerant Gluconobacter japonicus strain, potentially useful for coenzyme Q10 production
In this report, Gluconobacter strains were screened for coenzyme Q10 (CoQ10) production. A thermotolerant strain, Gluconobacter japonicus FM10, was eventually employed for CoQ10 production optimization. To do so, a two-step optimization strategy was used. The first step focused on biomass increase and the second step focused on increase in CoQ10 production. Factors including temperature, pH, carbon, and nitrogen sources were optimized at the first step, and temperature, pH, and aeration were optimized at the second step. The batch culture fermentation was used with the optimized factors of the first phase (30 °C, pH 6.5, D-sorbitol, and yeast extract-peptone as the carbon and nitrogen sources). After 18 h, the temperature, pH, and aeration were shifted to the optimized values of the second step (36 °C, pH 7, and no aeration). By this strategy, the dry cell mass (17.1 g/L) and CoQ10 (23.2 mg/L) were obtained after 20 h, which the latter was 2.3 times higher than that of the first step of optimization. Among the conditions tested, carbon source was the most important factor on the cell growth at the first step while no aeration was the key factor for CoQ10 production in the second step of optimization.
- Open Access
- 7 December 2016
- Vol. 8 (4) , 188-192
Preliminary Study on Cost-Effective L-Tryptophan Production from Indole and L-Serine by E. coli Cells
L-tryptophan is used widespread in the pharmaceutical industry. The majority of L-Trp production depends on microbial processes that produce L-tryptophan from indole and L-serine. These processes are very costly due to the costs of precursors, especially L-serine. Use of inexpensive substitutions as the L-serine source of L-tryptophan production enables us to reach a cost-effective process. In this paper, effect of Triton X-100 on L-Trp production and the ability to use Iranian cane molasses as inexpensive L-serine source was investigated. Escherichia coli (E. coli) ATCC 11303 cells were grown in 10-L fermenter containing minimal medium supplemented with beet molasses as an inexpensive carbon source and indole as tryptophan synthase inducer. Whole cells of stationary phase were used as biocatalyst for L-Trp production. Triton X-100 addition to the production medium as indole reservoir was investigated. Then, cane molasses was used as L-Ser source in L-Trp production medium. Amount of L-Tryptophan and theoretical yield of L-Trp production was determined by HPLC and by a colorimetrically method on the basis of remaining indole assay, respectively. As a result, triton X-100 increased L-Trp production three times. Also, the result showed that 0.68 mM L-Tryptophan was produced in the presence of cane molasses at 37°C for 8 hr. This result showed that cane molasses of Qazvin sugar factory includes significant amounts of L-Ser that makes it a suitable substitution for L-Ser in L-Trp production. Therefore, it has the potential to be used for cost-effective L-Trp production in industrial scale.
- 7 December 2016
- Vol. 8 (4) , 188-192
Open AccessPreliminary Study on Cost-Effective L-Tryptophan Production from Indole and L-Serine by E. coli Cells
L-tryptophan is used widespread in the pharmaceutical industry. The majority of L-Trp production depends on microbial processes that produce L-tryptophan from indole and L-serine. These processes are very costly due to the costs of precursors, especially L-serine. Use of inexpensive substitutions as the L-serine source of L-tryptophan production enables us to reach a cost-effective process. In this paper, effect of Triton X-100 on L-Trp production and the ability to use Iranian cane molasses as inexpensive L-serine source was investigated. Escherichia coli (E. coli) ATCC 11303 cells were grown in 10-L fermenter containing minimal medium supplemented with beet molasses as an inexpensive carbon source and indole as tryptophan synthase inducer. Whole cells of stationary phase were used as biocatalyst for L-Trp production. Triton X-100 addition to the production medium as indole reservoir was investigated. Then, cane molasses was used as L-Ser source in L-Trp production medium. Amount of L-Tryptophan and theoretical yield of L-Trp production was determined by HPLC and by a colorimetrically method on the basis of remaining indole assay, respectively. As a result, triton X-100 increased L-Trp production three times. Also, the result showed that 0.68 mM L-Tryptophan was produced in the presence of cane molasses at 37°C for 8 hr. This result showed that cane molasses of Qazvin sugar factory includes significant amounts of L-Ser that makes it a suitable substitution for L-Ser in L-Trp production. Therefore, it has the potential to be used for cost-effective L-Trp production in industrial scale.
- Open Access
- 1 March 2010
- Vol. 2 (1) , 46-50
Screening the thermophilic and hyperthermophilic bacterial population of three Iranian hot-springs to detect the thermostable α-amylase producing strain
Screening is a routine procedure for isolation of microorganisms which are able to produce special metabolites. Purified thermostable α-amylase from bacterial sources is widely used in different industries. In this study we analyzed samples collected from three different hot springs in Iran to detect any strains capable of producing thermostable α-amylase. Hot water samples from Larijan (67°C, pH 6.5), Mahallat (46°C, pH 7), and Meshkinshahr (82°C, pH 6), were cultivated in screening starch agar plates and incubated at 65°C for 24 hours. Thereafter, the plates were stained with Gram's iodine solution. The bacterial colonies from the Meshkinshahr hot-spring produced the largest haloforming zone. Based on the phenotypic tests, the strain was identified as Bacillus sp. The culture condition was optimized for biosynthesis of α-amylase. The enzyme was produced at maximum level when it was incubated at 70°C in the presence of soluble starch (1%) at pH 6. The addition of calcium (10 mM) and peptone (1%) to the mineral medium, shortened the lag period and improved the growth and α-amylase synthesis. The addition of glucose (1%) to the culture greatly diminished the syntheses of α -amylase. Importantly, the enzyme extract retained 100% activity when incubated for 45 minutes at 100°C. The Meshkinshahr hot-spring is rich in the Bacillus spp thermostable α-amylase producing strain of the thermophilic bacterial population. Iranian hot-springs like Meshkinshahr, have large microbial storages and can be used as sources of different biological products like enzymes. The enzyme which was produced with Bacillus sp. could hydrolyse polymers like starch and was used at laboratory scale successfully.
- 1 March 2010
- Vol. 2 (1) , 46-50
Open AccessScreening the thermophilic and hyperthermophilic bacterial population of three Iranian hot-springs to detect the thermostable α-amylase producing strain
Screening is a routine procedure for isolation of microorganisms which are able to produce special metabolites. Purified thermostable α-amylase from bacterial sources is widely used in different industries. In this study we analyzed samples collected from three different hot springs in Iran to detect any strains capable of producing thermostable α-amylase. Hot water samples from Larijan (67°C, pH 6.5), Mahallat (46°C, pH 7), and Meshkinshahr (82°C, pH 6), were cultivated in screening starch agar plates and incubated at 65°C for 24 hours. Thereafter, the plates were stained with Gram's iodine solution. The bacterial colonies from the Meshkinshahr hot-spring produced the largest haloforming zone. Based on the phenotypic tests, the strain was identified as Bacillus sp. The culture condition was optimized for biosynthesis of α-amylase. The enzyme was produced at maximum level when it was incubated at 70°C in the presence of soluble starch (1%) at pH 6. The addition of calcium (10 mM) and peptone (1%) to the mineral medium, shortened the lag period and improved the growth and α-amylase synthesis. The addition of glucose (1%) to the culture greatly diminished the syntheses of α -amylase. Importantly, the enzyme extract retained 100% activity when incubated for 45 minutes at 100°C. The Meshkinshahr hot-spring is rich in the Bacillus spp thermostable α-amylase producing strain of the thermophilic bacterial population. Iranian hot-springs like Meshkinshahr, have large microbial storages and can be used as sources of different biological products like enzymes. The enzyme which was produced with Bacillus sp. could hydrolyse polymers like starch and was used at laboratory scale successfully.