Heonseok Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Heonseok Lee has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Woo-Suk Kim
Department of Architectural Engineering, Kumoh National Institute of Technology, Gumi, Republic of Korea
5 shared publications - Yong-Hak Kang
International Business Division New Business Development Team, Korea Conformity Laboratories, Seoul 06711, Korea
4 shared publications - Hyeonwook Cheon
Department of Architectural Engineering, Kumoh National Institute of Technology, Gumi 39177, Korea
2 shared publications - Junwon Seo
Department of Civil and Environmental Engineering, South Dakota State University, Brookings, SD 57007, USA
2 shared publications - Seungjun Roh
School of Architecture, Kumoh National Institute of Technology, Gumi 39177, Republic of Korea
2 shared publications Hyeon-Uk Cheon
1 shared publication
Latest Publications
- Open Access
- 16 December 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (24) , 11982
Mechanical Properties of Cement Composites Using Modified Plastics by Gamma Irradiation
Recently, pollution caused by an increasing amount of worldwide plastic waste has become a global problem. However, these concerns can be alleviated by the use of gamma-ray technology. Using radiation technology, plastic wastes can be converted into a variety of useful purposes presenting powerful opportunities for environmental sustainability and material innovations. Plastics are strong, durable, waterproof, lightweight, easy to mold, and recyclable. In this study, plastic aggregate modified by gamma irradiation was mixed into cement composites, and mechanical property evaluation experiments were conducted. As a result, it was confirmed that the physical performance of cement composites was improved by up to 70% in the case of using the modified plastic aggregates compared to the general plastic aggregate.
- 16 December 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (24) , 11982
Open AccessMechanical Properties of Cement Composites Using Modified Plastics by Gamma Irradiation
Recently, pollution caused by an increasing amount of worldwide plastic waste has become a global problem. However, these concerns can be alleviated by the use of gamma-ray technology. Using radiation technology, plastic wastes can be converted into a variety of useful purposes presenting powerful opportunities for environmental sustainability and material innovations. Plastics are strong, durable, waterproof, lightweight, easy to mold, and recyclable. In this study, plastic aggregate modified by gamma irradiation was mixed into cement composites, and mechanical property evaluation experiments were conducted. As a result, it was confirmed that the physical performance of cement composites was improved by up to 70% in the case of using the modified plastic aggregates compared to the general plastic aggregate.
- Open Access
- 3 November 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (21) , 10340
State-of-the-Art Modification of Plastic Aggregates Using Gamma Irradiation and Its Optimization for Application to Cementitious Composites
In the past few decades, there have been numerous attempts to add plastic aggregates composed of polymeric materials to cementitious composites, either as an alternative to using natural aggregates or as fillers and fibers. However, the addition of plastic aggregates often results in cementitious composites with lower mechanical performance. In this paper, we attempt to address this issue by applying gamma irradiation technology to restore the mechanical performance. We aimed to determine the optimal gamma irradiation and mixing combinations by comparing the experimental results with information summarizing the recent literature related to the use of gamma-irradiated plastic aggregates within cementitious composites. To this end, the effects of changes in the physical and chemical properties of plastics due to irradiation with gamma irradiation on the strength of cementitious composites were evaluated using irradiation doses of 25, 50, 75, and 100 kGy and various plastic materials as key parameters. In the compressive strength test, it was found that adding gamma-irradiated plastic increased the compressive strength of the cementitious composites compared to the nonirradiated plastic. This suggests that the irradiation of plastic aggregates with gamma rays is an effective method to recover some of the strength lost when plastic aggregates are added to cementitious composites. In addition, modifications in the microstructure and chemical properties of the gamma-irradiated plastic were analyzed through SEM and FT-IR analysis, which allowed the determination of the strength enhancement mechanism. The results of this study show the possibility of the state-of-the-art performance improvement method for using plastic aggregate as a substitute for natural aggregate, going further from the plastic performance improvement technology for limited materials and radiation dose presented in previous studies.
- 3 November 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (21) , 10340
Open AccessState-of-the-Art Modification of Plastic Aggregates Using Gamma Irradiation and Its Optimization for Application to Cementitious Composites
In the past few decades, there have been numerous attempts to add plastic aggregates composed of polymeric materials to cementitious composites, either as an alternative to using natural aggregates or as fillers and fibers. However, the addition of plastic aggregates often results in cementitious composites with lower mechanical performance. In this paper, we attempt to address this issue by applying gamma irradiation technology to restore the mechanical performance. We aimed to determine the optimal gamma irradiation and mixing combinations by comparing the experimental results with information summarizing the recent literature related to the use of gamma-irradiated plastic aggregates within cementitious composites. To this end, the effects of changes in the physical and chemical properties of plastics due to irradiation with gamma irradiation on the strength of cementitious composites were evaluated using irradiation doses of 25, 50, 75, and 100 kGy and various plastic materials as key parameters. In the compressive strength test, it was found that adding gamma-irradiated plastic increased the compressive strength of the cementitious composites compared to the nonirradiated plastic. This suggests that the irradiation of plastic aggregates with gamma rays is an effective method to recover some of the strength lost when plastic aggregates are added to cementitious composites. In addition, modifications in the microstructure and chemical properties of the gamma-irradiated plastic were analyzed through SEM and FT-IR analysis, which allowed the determination of the strength enhancement mechanism. The results of this study show the possibility of the state-of-the-art performance improvement method for using plastic aggregate as a substitute for natural aggregate, going further from the plastic performance improvement technology for limited materials and radiation dose presented in previous studies.
- Open Access
- 22 July 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (15) , 6725
Seismic and Energy Performance Evaluation of Large-Scale Curtain Walls Subjected to Displacement Control Fasteners
Glass façade curtain walls in buildings is the façade system of choice in modern architecture of mid- to high-rise buildings. This study investigates the seismic and thermal insulation performance of curtain wall systems through structural analysis using the finite element method (FEM) and LBNL Window&Therm insulation analysis. The aim was to optimize the capability of the curtain wall module system and the fastener element technology to respond to displacement and vibration caused by dynamic seismic waves. Using the structural analysis of the optimization process, a curtain wall system capable of withstanding earthquake waves of 0.4 Hz, displacement of ±150 mm or more, and capable of responding to three-axis (X, Y, and Z-axis) dynamic earthquakes, was fabricated. Then, a curtain wall system that satisfies not only the evaluation of seismic performance, but also the desired airtightness, watertightness, wind pressure, and insulation, which are essential requirements for field applications, was verified through an experiment. Based on this study, it is expected that a curtain wall system capable of responding to three-axis dynamic seismic waves can be applied to mid- and high-rise buildings to prevent secondary damage in the event of an earthquake.
- 22 July 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (15) , 6725
Open AccessSeismic and Energy Performance Evaluation of Large-Scale Curtain Walls Subjected to Displacement Control Fasteners
Glass façade curtain walls in buildings is the façade system of choice in modern architecture of mid- to high-rise buildings. This study investigates the seismic and thermal insulation performance of curtain wall systems through structural analysis using the finite element method (FEM) and LBNL Window&Therm insulation analysis. The aim was to optimize the capability of the curtain wall module system and the fastener element technology to respond to displacement and vibration caused by dynamic seismic waves. Using the structural analysis of the optimization process, a curtain wall system capable of withstanding earthquake waves of 0.4 Hz, displacement of ±150 mm or more, and capable of responding to three-axis (X, Y, and Z-axis) dynamic earthquakes, was fabricated. Then, a curtain wall system that satisfies not only the evaluation of seismic performance, but also the desired airtightness, watertightness, wind pressure, and insulation, which are essential requirements for field applications, was verified through an experiment. Based on this study, it is expected that a curtain wall system capable of responding to three-axis dynamic seismic waves can be applied to mid- and high-rise buildings to prevent secondary damage in the event of an earthquake.
- Open Access
- 27 January 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (3) , 426
State-of-the-Art of Cellulose Nanocrystals and Optimal Method for their Dispersion for Construction-Related Applications
In this paper, we reviewed the existing literature on the fabrication of nanocomposites based on cellulose and cellulose nanocrystals (CNCs), and analyzed their dispersion mechanism with respect to their use in the field of construction. First, the existing literature on CNC-based nanocomposites that exhibit the physical and chemical properties of nanocellulose and CNCs was reviewed. Next, keeping the use of these nanocomposites in the field of construction in mind, we determined the optimal mechanical method for their dispersion as an alternative to the currently used harmful chemical techniques. To this end, we evaluated the dispersibility of colloidal CNCs using two dispersion methods: magnetic stirring (for stirring times of 60 min, 120 min, and 180 min) and high-pressure dispersion (at pressures of 345 × 105 Pa, 1035 × 105 Pa, and 1587 × 105 Pa, and one to three dispersion passes). The optimal dispersion conditions were determined by analyzing the size and zeta potential of the CNC particles. It was found that the difference in the average diameter was reduced by approximately 76% at 1587 × 105 Pa during high-pressure dispersion.
- 27 January 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (3) , 426
Open AccessState-of-the-Art of Cellulose Nanocrystals and Optimal Method for their Dispersion for Construction-Related Applications
In this paper, we reviewed the existing literature on the fabrication of nanocomposites based on cellulose and cellulose nanocrystals (CNCs), and analyzed their dispersion mechanism with respect to their use in the field of construction. First, the existing literature on CNC-based nanocomposites that exhibit the physical and chemical properties of nanocellulose and CNCs was reviewed. Next, keeping the use of these nanocomposites in the field of construction in mind, we determined the optimal mechanical method for their dispersion as an alternative to the currently used harmful chemical techniques. To this end, we evaluated the dispersibility of colloidal CNCs using two dispersion methods: magnetic stirring (for stirring times of 60 min, 120 min, and 180 min) and high-pressure dispersion (at pressures of 345 × 105 Pa, 1035 × 105 Pa, and 1587 × 105 Pa, and one to three dispersion passes). The optimal dispersion conditions were determined by analyzing the size and zeta potential of the CNC particles. It was found that the difference in the average diameter was reduced by approximately 76% at 1587 × 105 Pa during high-pressure dispersion.