Jiyoung Ma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiyoung Ma has a total of 84 co-authors. Here are the top co-authors by number of shared publications:
- Jaephil Cho
Department of Energy Engineering, School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan, 689-798, South Korea
9 shared publications Namhyung Kim
Advanced Battery Development Team Hyundai Motor Company Hwaseong 18280 Republic of Korea
7 shared publicationsSujong Chae
Energy and Environment Directorate Pacific Northwest National Laboratory (PNNL) 902 Battelle Boulevard Richland WA 99354 USA
6 shared publicationsJaekyung Sung
Department of Energy Engineering, School of Energy and Chemical Engineering Ulsan National Institute of Science and Technology (UNIST) Ulsan 44919 South Korea
5 shared publicationsSeong‐Hyeon Choi
Advanced Battery Development Team Hyundai Motor Company Hwaseong 18280 Republic of Korea
4 shared publicationsYeonguk Son
Department of Engineering, University of Cambridge, CB3 0FS Cambridge, UK
4 shared publications
Latest Publications
- 9 May 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (6) , 2670-2678
F-Free Pressure-Sensitive Adhesives as Dry-Coating Process Binders for Ultrahigh-Loading Graphite Anodes
- 9 May 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (6) , 2670-2678
F-Free Pressure-Sensitive Adhesives as Dry-Coating Process Binders for Ultrahigh-Loading Graphite Anodes
- Open Access
- 27 September 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 15 (3)
Reviving Spent NCM Cathodes via Spontaneous Galvanic Corrosion in Ambient Atmospheric Condition
The recycling of end‐of‐life Li‐ion batteries (EoL LIBs) is critical for maintaining the sustainable LIB industry. In this study, the compositional restoration method for degraded Li Δ Ni 0.6 Co 0.2 Mn 0.2 O 2 cathode via spontaneous galvanic corrosion, which can be conducted at room temperature, is demonstrated. Achieving the lithiation of spent Li Δ Ni 0.6 Co 0.2 Mn 0.2 O 2 to its pristine state at room temperature requires a strong reducing agent with a redox potential lower than 1.6 V (vs Li/Li + ), which is very reactive and expensive. In the designed restoration system, spontaneous restoration can be achieved by using an Aluminum (Al) current collector as a reducing agent which has sufficient reducing power (Al/Al 3+ , 1.37 V (vs Li/Li + )). Moreover, through a galvanic reaction design that utilizes Li‐ion in the electrolyte of spent LIBs, the additional Li source required to replenish the Li‐deficient NCM is minimized. The galvanic corrosion‐based restoration mechanism is systematically analyzed, and a spent Li 0.76 Ni 0.6 Co 0.2 Mn 0.2 O 2 is successfully restored to its pristine state (Li 1.05 Ni 0.6 Co 0.2 Mn 0.2 O 2 ). Furthermore, restoration strategies accomplishable in not only the cathode state but also the battery state are presented to ensure applicability in practical recycling processes. The proposed strategy suggests a new insight into the direct cathode recycling technology, possessing economic feasibility, and environmental friendliness.
- 27 September 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 15 (3)
Open AccessReviving Spent NCM Cathodes via Spontaneous Galvanic Corrosion in Ambient Atmospheric Condition
The recycling of end‐of‐life Li‐ion batteries (EoL LIBs) is critical for maintaining the sustainable LIB industry. In this study, the compositional restoration method for degraded Li Δ Ni 0.6 Co 0.2 Mn 0.2 O 2 cathode via spontaneous galvanic corrosion, which can be conducted at room temperature, is demonstrated. Achieving the lithiation of spent Li Δ Ni 0.6 Co 0.2 Mn 0.2 O 2 to its pristine state at room temperature requires a strong reducing agent with a redox potential lower than 1.6 V (vs Li/Li + ), which is very reactive and expensive. In the designed restoration system, spontaneous restoration can be achieved by using an Aluminum (Al) current collector as a reducing agent which has sufficient reducing power (Al/Al 3+ , 1.37 V (vs Li/Li + )). Moreover, through a galvanic reaction design that utilizes Li‐ion in the electrolyte of spent LIBs, the additional Li source required to replenish the Li‐deficient NCM is minimized. The galvanic corrosion‐based restoration mechanism is systematically analyzed, and a spent Li 0.76 Ni 0.6 Co 0.2 Mn 0.2 O 2 is successfully restored to its pristine state (Li 1.05 Ni 0.6 Co 0.2 Mn 0.2 O 2 ). Furthermore, restoration strategies accomplishable in not only the cathode state but also the battery state are presented to ensure applicability in practical recycling processes. The proposed strategy suggests a new insight into the direct cathode recycling technology, possessing economic feasibility, and environmental friendliness.
- Open Access
- 29 May 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 14 (32)
Self‐Converted Scaffold Enables Dendrite‐Free and Long‐Life Zn‐Ion Batteries
Zn‐ion batteries are fascinating owing to their inherent safety and high theoretical capacity. However, dendrite‐free growth is challenging, limiting highly stable plating for long‐life batteries. Herein, a new, conceptual ultra‐stable self‐converted scaffold (SCS) Zn anode is reported that enables dendrite‐free plating by guiding the deposition of Zn to specific areas. The SCS is naturally transformed from a zincophilic yet resistive nucleation seed. As a sufficient amount of Zn is plated onto these nucleation seeds, they undergo self‐conversion into a resistive scaffold, thereby losing their Zn affinity, and effectively directing the Zn plating toward the less resistive basal plane by repelling the electrons. The unique electrode demonstrates exceptional stability, effectively controlling dendrite‐free growth for thicknesses of up to 120 µm even in open‐plating environments with an impressive areal capacity of 60 mAh cm−2. Moreover, in full cell configuration, the SCS shows a superior long cycle‐life of 3000 cycles. The newly discovered dendrite‐free plating mechanism is also demonstrated.
- 29 May 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 14 (32)
Open AccessSelf‐Converted Scaffold Enables Dendrite‐Free and Long‐Life Zn‐Ion Batteries
Zn‐ion batteries are fascinating owing to their inherent safety and high theoretical capacity. However, dendrite‐free growth is challenging, limiting highly stable plating for long‐life batteries. Herein, a new, conceptual ultra‐stable self‐converted scaffold (SCS) Zn anode is reported that enables dendrite‐free plating by guiding the deposition of Zn to specific areas. The SCS is naturally transformed from a zincophilic yet resistive nucleation seed. As a sufficient amount of Zn is plated onto these nucleation seeds, they undergo self‐conversion into a resistive scaffold, thereby losing their Zn affinity, and effectively directing the Zn plating toward the less resistive basal plane by repelling the electrons. The unique electrode demonstrates exceptional stability, effectively controlling dendrite‐free growth for thicknesses of up to 120 µm even in open‐plating environments with an impressive areal capacity of 60 mAh cm−2. Moreover, in full cell configuration, the SCS shows a superior long cycle‐life of 3000 cycles. The newly discovered dendrite‐free plating mechanism is also demonstrated.
- 21 September 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (39) , 21222-21230
Upcycling spent cathodes into single-crystalline Ni-rich cathode materials through selective lithium extraction
Direct recycling has been considered the most promising method of recycling spent batteries because of its eco-friendliness and cost-effectiveness. However, the uneven distribution of elements and particle sizes in spent cathode materials, caused by different states of health, presents a challenge for direct recycling. In this study, we employed a pre-treatment process using chlorination to selectively extract residual lithium and enhance the uniformity of the particle sizes in a spent LiNi0.6Co0.2Mn0.2O2 cathode. Furthermore, a multi-step aging process was designed to increase the primary particle size and minimize impurity formation, resulting in the successful synthesis of upcycled single-crystalline LiNi0.8Co0.1Mn0.1O2 (NCM811). The bimodal electrode, which contained both upcycled single-crystalline and commercially available polycrystalline NCM811, exhibited a large discharge capacity of 191.3 mA h g−1 at 0.2C and maintained a stable cycle performance of 84.1% after 300 cycles at 1C. Our study highlights the use of selective lithium extraction in the regeneration process, enabling the homogenization of the element distribution and particle size in spent cathode materials as well as the effective utilization of upcycled single-crystalline cathode materials.
- 21 September 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (39) , 21222-21230
Upcycling spent cathodes into single-crystalline Ni-rich cathode materials through selective lithium extraction
Direct recycling has been considered the most promising method of recycling spent batteries because of its eco-friendliness and cost-effectiveness. However, the uneven distribution of elements and particle sizes in spent cathode materials, caused by different states of health, presents a challenge for direct recycling. In this study, we employed a pre-treatment process using chlorination to selectively extract residual lithium and enhance the uniformity of the particle sizes in a spent LiNi0.6Co0.2Mn0.2O2 cathode. Furthermore, a multi-step aging process was designed to increase the primary particle size and minimize impurity formation, resulting in the successful synthesis of upcycled single-crystalline LiNi0.8Co0.1Mn0.1O2 (NCM811). The bimodal electrode, which contained both upcycled single-crystalline and commercially available polycrystalline NCM811, exhibited a large discharge capacity of 191.3 mA h g−1 at 0.2C and maintained a stable cycle performance of 84.1% after 300 cycles at 1C. Our study highlights the use of selective lithium extraction in the regeneration process, enabling the homogenization of the element distribution and particle size in spent cathode materials as well as the effective utilization of upcycled single-crystalline cathode materials.
- 21 March 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 10 (16) , 9091-9102
Viable post-electrode-engineering for the complete integrity of large-volume-change lithium-ion battery anodes
As an anode material, a robust MgGaZnO coated Si/rGO-web hybrid composite is newly designed by viable post-electrode-engineering. The designed anode shows a significant improvement in the stability via synergistic inner–outer structural treatments.
- 21 March 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 10 (16) , 9091-9102
Viable post-electrode-engineering for the complete integrity of large-volume-change lithium-ion battery anodes
As an anode material, a robust MgGaZnO coated Si/rGO-web hybrid composite is newly designed by viable post-electrode-engineering. The designed anode shows a significant improvement in the stability via synergistic inner–outer structural treatments.
- Open Access
- 17 September 2020
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 13 (10) , 3723-3731
High energy density anodes using hybrid Li intercalation and plating mechanisms on natural graphite
A novel Li-Ion battery anode is presented which leverages the good performance of industrial graphite anodes and enhances their performance by allowing for reversible Li plating on their surface.
- 17 September 2020
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 13 (10) , 3723-3731
Open AccessHigh energy density anodes using hybrid Li intercalation and plating mechanisms on natural graphite
A novel Li-Ion battery anode is presented which leverages the good performance of industrial graphite anodes and enhances their performance by allowing for reversible Li plating on their surface.
- 17 December 2019
- Published by Wiley in Advanced Energy Materials
- Vol. 10 (6)
Strategic Pore Architecture for Accommodating Volume Change from High Si Content in Lithium‐Ion Battery Anodes
To be a thinner and more lightweight lithium‐ion battery with high energy density, the next‐generation anode with high gravimetric and volumetric capacity is a prerequisite. In this regard, utilizing high silicon (3579 mAh g−1) content in the electrode for the anode has been highlighted as a practically relevant approach. However, there still remains a crucial issue related to intrinsic volume expansion (>300%) of silicon upon lithiation, which can directly affect severe electrode swelling as well as accelerate its capacity fading by triggering structural degradation and electrical contact loss between particles. Herein, macropore‐exploited design, which can accommodate the volume change of high silicon content within the extended pore of graphite upon repeated cycling, is introduced. Such unique macropore‐exploited design leads to much less electrode swelling, by preserving its morphological integrity and contact between particles, than that of the comparative group with different sized pore and silicon distribution. As a result, this anode (914 mAh g−1) demonstrates notable gravimetric (220 Wh kg−1 at 6000 W kg−1) and volumetric energy density (623 Wh L−1 upon full lithiation after 100 cycles), exceeding that of a nano‐silicon blended graphite anode (127 Wh kg−1 and 229 Wh L−1) in the full‐cell system.
- 17 December 2019
- Published by Wiley in Advanced Energy Materials
- Vol. 10 (6)
Strategic Pore Architecture for Accommodating Volume Change from High Si Content in Lithium‐Ion Battery Anodes
To be a thinner and more lightweight lithium‐ion battery with high energy density, the next‐generation anode with high gravimetric and volumetric capacity is a prerequisite. In this regard, utilizing high silicon (3579 mAh g−1) content in the electrode for the anode has been highlighted as a practically relevant approach. However, there still remains a crucial issue related to intrinsic volume expansion (>300%) of silicon upon lithiation, which can directly affect severe electrode swelling as well as accelerate its capacity fading by triggering structural degradation and electrical contact loss between particles. Herein, macropore‐exploited design, which can accommodate the volume change of high silicon content within the extended pore of graphite upon repeated cycling, is introduced. Such unique macropore‐exploited design leads to much less electrode swelling, by preserving its morphological integrity and contact between particles, than that of the comparative group with different sized pore and silicon distribution. As a result, this anode (914 mAh g−1) demonstrates notable gravimetric (220 Wh kg−1 at 6000 W kg−1) and volumetric energy density (623 Wh L−1 upon full lithiation after 100 cycles), exceeding that of a nano‐silicon blended graphite anode (127 Wh kg−1 and 229 Wh L−1) in the full‐cell system.
- 19 June 2019
- Published by Wiley in Advanced Materials
- Vol. 31 (33) , e1900970
Fabrication of Lamellar Nanosphere Structure for Effective Stress‐Management in Large‐Volume‐Variation Anodes of High‐Energy Lithium‐Ion Batteries
The use of high‐capacity anode materials to overcome the energy density limits imposed by the utilization of low‐theoretical‐capacity conventional graphite has recently drawn increased attention. Until now, stress management (including strategies relying on size, surface coating, and free volume control) has been achieved by addressing the critical problems originating from significant anode volume expansion upon lithiation. However, commercially viable alternatives to graphite have not yet been found. A new stress‐management strategy relying on the use of a lamellar nanosphere Si anode is proposed. Specifically, nanospheres comprising ≈50 nm Si nanoparticles encapsulated by SiOx /Si/SiOx /C layers with thicknesses of x is found to act as a stress management interlayer when it is located between Si and mitigates stress intensification on the surface layer, allowing nanospheres to maintain their morphological integrity and promoting the formation of a stable solid electrolyte interphase layer during cycling. When tested using an industrial protocol, a full cell comprising a nanosphere/graphite blended anode and a lithium cobalt oxide cathode achieve an average energy density of 2440.2 Wh L−1 (1.72 times higher than that of conventional graphite) with a capacity retention ratio of 80% after 101 cycles.
- 19 June 2019
- Published by Wiley in Advanced Materials
- Vol. 31 (33) , e1900970
Fabrication of Lamellar Nanosphere Structure for Effective Stress‐Management in Large‐Volume‐Variation Anodes of High‐Energy Lithium‐Ion Batteries
The use of high‐capacity anode materials to overcome the energy density limits imposed by the utilization of low‐theoretical‐capacity conventional graphite has recently drawn increased attention. Until now, stress management (including strategies relying on size, surface coating, and free volume control) has been achieved by addressing the critical problems originating from significant anode volume expansion upon lithiation. However, commercially viable alternatives to graphite have not yet been found. A new stress‐management strategy relying on the use of a lamellar nanosphere Si anode is proposed. Specifically, nanospheres comprising ≈50 nm Si nanoparticles encapsulated by SiOx /Si/SiOx /C layers with thicknesses of x is found to act as a stress management interlayer when it is located between Si and mitigates stress intensification on the surface layer, allowing nanospheres to maintain their morphological integrity and promoting the formation of a stable solid electrolyte interphase layer during cycling. When tested using an industrial protocol, a full cell comprising a nanosphere/graphite blended anode and a lithium cobalt oxide cathode achieve an average energy density of 2440.2 Wh L−1 (1.72 times higher than that of conventional graphite) with a capacity retention ratio of 80% after 101 cycles.
- 4 February 2019
- Published by Wiley in Advanced Energy Materials
- Vol. 9 (11)
Quantification of Pseudocapacitive Contribution in Nanocage‐Shaped Silicon–Carbon Composite Anode
Pseudocapacitive materials have been highlighted as promising electrode materials to overcome slow diffusion‐limited redox mechanism in active materials, which impedes fast charging/discharging in energy storage devices. However, previously reported pseudocapacitive properties have been rarely used in lithium‐ion batteries (LIBs) and evaluation methods have been limited to those focused on thin‐film‐type electrodes. Hence, a nanocage‐shaped silicon–carbon composite anode is proposed with excellent pseudocapacitive qualities for LIB applications. This composite anode exhibits a superior rate capability compared to other Si‐based anodes, including commercial silicon nanoparticles, because of the higher pseudocapacitive contribution coming from ultrathin Si layer. Furthermore, unprecedent 3D pore design in cage shape, which prevents the particle scale expansion even after full lithiation demonstrates the high cycling stability. This concept can potentially be used to realize high‐power and high‐energy LIB anode materials.
- 4 February 2019
- Published by Wiley in Advanced Energy Materials
- Vol. 9 (11)
Quantification of Pseudocapacitive Contribution in Nanocage‐Shaped Silicon–Carbon Composite Anode
Pseudocapacitive materials have been highlighted as promising electrode materials to overcome slow diffusion‐limited redox mechanism in active materials, which impedes fast charging/discharging in energy storage devices. However, previously reported pseudocapacitive properties have been rarely used in lithium‐ion batteries (LIBs) and evaluation methods have been limited to those focused on thin‐film‐type electrodes. Hence, a nanocage‐shaped silicon–carbon composite anode is proposed with excellent pseudocapacitive qualities for LIB applications. This composite anode exhibits a superior rate capability compared to other Si‐based anodes, including commercial silicon nanoparticles, because of the higher pseudocapacitive contribution coming from ultrathin Si layer. Furthermore, unprecedent 3D pore design in cage shape, which prevents the particle scale expansion even after full lithiation demonstrates the high cycling stability. This concept can potentially be used to realize high‐power and high‐energy LIB anode materials.
- Open Access
- 29 January 2019
- Published by Springer Nature in Nature Communications
- Vol. 10 (1) , 1-10
Towards maximized volumetric capacity via pore-coordinated design for large-volume-change lithium-ion battery anodes
To achieve the urgent requirement for high volumetric energy density in lithium-ion batteries, alloy-based anodes have been spotlighted as next-generation alternatives. Nonetheless, for the veritable accomplishment with regards to high-energy demand, alloy-based anodes must be evaluated considering several crucial factors that determine volumetric capacity. In particular, the electrode swelling upon cycling must be contemplated if these anodes are to replace conventional graphite anodes in terms of volumetric capacity. Herein, we propose macropore-coordinated graphite-silicon composite by incorporating simulation and mathematical calculation of numerical values from experimental data. This unique structure exhibits minimized electrode swelling comparable to conventional graphite under industrial electrode fabrication conditions. Consequently, this hybrid anode, even with high specific capacity (527 mAh g−1) and initial coulombic efficiency (93%) in half-cell, achieves higher volumetric capacity (493.9 mAh cm−3) and energy density (1825.7 Wh L−1) than conventional graphite (361.4 mAh cm−3 and 1376.3 Wh L−1) after 100 cycles in the full-cell configuration.
- 29 January 2019
- Published by Springer Nature in Nature Communications
- Vol. 10 (1) , 1-10
Open AccessTowards maximized volumetric capacity via pore-coordinated design for large-volume-change lithium-ion battery anodes
To achieve the urgent requirement for high volumetric energy density in lithium-ion batteries, alloy-based anodes have been spotlighted as next-generation alternatives. Nonetheless, for the veritable accomplishment with regards to high-energy demand, alloy-based anodes must be evaluated considering several crucial factors that determine volumetric capacity. In particular, the electrode swelling upon cycling must be contemplated if these anodes are to replace conventional graphite anodes in terms of volumetric capacity. Herein, we propose macropore-coordinated graphite-silicon composite by incorporating simulation and mathematical calculation of numerical values from experimental data. This unique structure exhibits minimized electrode swelling comparable to conventional graphite under industrial electrode fabrication conditions. Consequently, this hybrid anode, even with high specific capacity (527 mAh g−1) and initial coulombic efficiency (93%) in half-cell, achieves higher volumetric capacity (493.9 mAh cm−3) and energy density (1825.7 Wh L−1) than conventional graphite (361.4 mAh cm−3 and 1376.3 Wh L−1) after 100 cycles in the full-cell configuration.