WGWaldo Galle

Waldo Galle

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Waldo Galle has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • The reuse potential of hundreds of insulating glass units in buildings: a case study in The Netherlands

    by Esther Geboes, Ed Melet, Pieter Bons, Waldo Galle, Niels De Temmerman, Elke Van Nieuwenhuijzen

  • Open Access

    The Reuse Potential of Hundreds of Insulating Glass Units in Buildings

    by Esther Geboes, Ed Melet, Pieter Bons, Waldo Galle, Niels De Temmerman, Elke van Nieuwenhuijzen

    Reuse of entire insulating glass units (IGUs) is a high-level circular strategy to reduce material use, energy demand, and CO2 emissions from manufacturing, but remains little studied. This study explores the technical reuse potential of 930 argon-filled double glazed IGUs in 43 Dutch buildings, using residual argon gas concentration as screening criteria for reuse. It assesses associations with IGU age, orientation, building, and assembler, and reviews the scalability and practicality of the proposed screening method. The reuse potential is explored through three perspectives: an availability-driven approach, a performance-driven threshold (T85) of ≥85% argon based on gas-fill requirements in EN1279, and a condition-driven threshold (T80) of >80% reflecting allowable argon diffusion over a 25-year service life as assumed by EN1279. Data was collected using spacer codes and the Sparklike Laser Portable. Results show that 54% of tested IGUs meet T85 and 75% meet T80. Although trends were observed for age, orientation, building, and assembler, none proved reliable as complementary pre-screening criteria for reuse. The proposed in-situ screening method is time-consuming; simplifying the protocol, integrating emissivity measurements, U-value calculation, and standardizing spacer codes can improve efficiency and reuse decision-making. When applying T80 for reuse, monitoring edge seal performance over time is advised. Further research should balance economic and environmental considerations (e.g. operational energy loss) for both product-level requirements and building-level reuse requirements.

  • Open Access

    Designing Temporary Use: Prototyping a Framework towards Material-Wise Projects

    by Gabrielle Kawa, Xantippe Van Schoor, Waldo Galle, Niels De Temmerman

    The growing awareness of the value of temporary use projects in reactivating unused buildings has led to their increased implementation and acceptance by local authorities and building owners. Encouraging such reactivation can help to address the large number of unused spaces in cities. Additionally, the construction sector’s substantial contribution to environmental damage amplifies the imperative for material-wise approaches to building reactivation, particularly when undertaken on a temporary basis. This study therefore delves into the overlooked dimensions of materialization and design within the realm of temporary use, shifting the discourse from the conventional emphasis on awareness raising to a more holistic approach encompassing sustainability and circularity. Through an in-depth case study analysis of nine pioneering temporary projects in and around Brussels, supported by semi-structured interviews and site visits, this paper first delves into the ‘material approach’ and the ‘design’ of temporary use projects. Second, through a comparative analysis of the cases, a framework of guidelines is prototyped, structured around three perspectives—materialization, design, and stakeholders—and their actionable steps, guidelines, and attention points. The proposed framework, presented and evaluated for the first time in academic research, serves as a proof of concept for the analysis and guidance of temporary use through three integrated perspectives towards resource efficiency. This innovative approach offers a holistic perspective that goes beyond mere standardization and awareness raising, acknowledging the complex dynamics inherent in temporary use projects and providing a comprehensive framework for analysis and action. Ultimately, translating this prototype into a user-friendly pamphlet holds potential to advance the knowledge in this field and facilitate the more effective and sustainable utilization of resources in temporary contexts.


  • Open Access

    Visualizing Equitable Housing: A Prototype for a Framework

    by Margaux Lespagnard, Waldo Galle, Niels De Temmerman

    Many citizens, researchers, civil organizations, and policymakers strive for equitable housing. Changing demographics, rising housing prices, and material and energy crises all add to the complexity of that quest. Responding to it, even on a project scale, requires a holistic view. Yet practitioners often work in niches. In contrast, an overarching, interdisciplinary understanding of equitable housing by all stakeholders is expected to bring more sustainable and just housing. In the academic literature, researchers have already defined many criteria of what equitable housing can entail. Nevertheless, this knowledge does not seep through to practitioners who design and develop equitable housing projects. Therefore, this paper proposes a prototype for an equitable housing framework. This framework is designed to facilitate an open discussion between all stakeholders in a project. To develop this framework, an explorative literature study and fifteen semi-structured interviews resulted in a long list of 418 considerations for equitable housing. These considerations are socially, financially, and environmentally oriented. To structure the considerations, they were categorized into fifteen dimensions and visualized in a doughnut-like framework. The framework is designed to encourage users to vocalize their needs and intentions, and to trigger systemic insights. It directs them towards sustainable, social, and inclusive decisions, based on the needs of all stakeholders involved. Moreover, the equitable housing framework allows understanding and analysing their thought patterns and intentions.


  • Open Access

    Make or break the loop: a cross-practitioners review of glass circularity

    by Esther Geboes, Waldo Galle, Niels De Temmerman

    End-of-life insulating glass units (IGUs) continue to follow a linear, wasteful path from renovation and demolition sites into landfills or low-value recycling. To get one step closer to the question of how to close the glass loop, this exploratory research outlines a cross-practitioners review of glass circularity in conventional Flemish and Brussels practices. A series of semi-structured interviews with network actors and an extensive literature study is conducted to identify existing and missing circular practices and to pinpoint the key barriers and opportunities. In general, the circular strategies repurpose and open-loop recycling of end-of-life IGUs are successfully applied in Flemish and Brussels construction practices. Repair, reuse, and closed-loop recycling remain unexplored. The main barriers are the lack of collaboration, logistic and labour costs to collect end-of-life IGUs, its complex disassembly, the lack of legal incentives and the conservativeness of the construction sector. Case studies, the high recycling potential and the scale of projects are found to be the main opportunities for glass circularity. The cross-practitioners’ insights in this paper contribute to close the glass loop and to further development and up-scaling of circular strategies.


  • Open Access

    Expandable Houses: An Explorative Life Cycle Cost Analysis

    by Charlotte Cambier, Waldo Galle, Niels De Temmerman

    In addition to the environmental burden of its construction and demolition activities, the Flemish housing market faces a structural affordability challenge. As one possible answer, this research explores the potential of so-called expandable houses, being built increasingly often. Through specific design choices that enable the disassembly and future reuse of individual components and so align with the idea of a circular economy, expandable houses promise to provide ever-changing homes with a smaller impact on the environment and at a lower cost for clients. In this paper, an expandable house suitable for various housing needs is conceived through a scenario-based research-by-design approach and compared to a reference house for Flanders. Subsequently, for both houses the life cycle costs are calculated and compared. The results of this exploration support the proposition that designing expandable houses can be a catalyst for sustainable, circular housing development and that households could benefit from its social, economic and ecological qualities. It requires, however, a dynamic perspective on evaluating their life-cycle impact.


  • Open Access

    Research and Development Directions for Design Support Tools for Circular Building

    by Charlotte Cambier, Waldo Galle, Niels De Temmerman

    To support the construction sector in its transition to a circular economy, many design instruments and decision support tools have been and are still being developed. This development is uncoordinated and raises confusion among building designers and advising engineers, slowing down the tools’ adoption in practice. Moreover, it is unclear if the available design tools are able to fulfil the needs of design professionals at all. Therefore, this research identifies the knowledge challenges for the “supply and demand” of design tools for a circular construction practice. It focuses on Flanders, given the importance the topic receives in the region’s policy programme and among practitioners. This study builds on a thorough literature review, and on inventorying and categorising instruments and ongoing developments. By comparing that review with the needs that were identified during interviews with a focus group, it was possible to pinpoint designers’ needs for support tools and outline three urgent research tracks. More generally, it was found that the needs of our focus group are only partially reflected by the available design tools and the ongoing developments. This identified mismatch advocates for a more participatory and practice-oriented research approach when developing design support tools for circular building.


  • Open Access

    Consequential LCA of demountable and reusable internal wall assemblies: a case study in a Belgian context

    by M Buyle, W Galle, W Debacker, A Audenaert

    The transition from a linear to a circular economy is essential to reduce the environmental burden of our society. A key issue is to prevent a shift of the environmental burdens and take the consequences of a decision into account, for example based on a consequential life cycle assessment (LCA). However, limited practical guidance is available on how to implement consequential LCA in the context of the construction sector. Therefore, the aim of this study is twofold. First, to quantify the potential environmental and burdens of introducing circular design alternatives for internal wall assemblies to the Belgian market. Second, to review the methodological implications on the results of a consequential LCA with a particular focus on consistently identifying marginal suppliers and substitution routes, acknowledging the time dependence and closed-loop nature of the design alternatives. In total seven wall assemblies are assessed over a period of 60 years, with a refurbishment every 15 year. The results show that a low life cycle impact can be achieved for assemblies that are designed to be used again and have a higher initial impact, such as a plywood boarding connected reversibly to a demountable metal frame substructure, as well as for assemblies with no possibilities for direct reuse that have a low initial impact, such as a drywall system with a wooden substructure. Further, regarding the methodological scenarios on marginal supplier identification, the range of possible outcomes is however much larger for the demountable wall assemblies than for the conventional ones.


  • Open Access

    Parametric life cycle assessment of a reusable brick veneer

    by C Vandervaeren, W Galle, N De Temmerman

    A possible design strategy to improve the sustainability of building products is facilitating their future reuse. This strategy inspires some manufacturers to design innovative products, such as reusable façade products. Although these products might have a higher environmental impact for production, their reusability could lead to an environmental saving from a life cycle perspective. A possible method to evaluate their environmental performance is life cycle assessment (LCA). Nevertheless, LCA studies of reusable products are still rare. Furthermore, although the general LCA frameworks is fixed by ISO and CEN standards, some methodological choices must still be made by LCA practitioners. This paper first presents a method (as four methodological choices) for a parametric life cycle assessment of reusable building elements. Then, this method is applied to a comparative LCA of reusable and brick-and-mortar veneers. With proposed method, the reusable brick veneer is environmentally advantageous if it is reused at least once and if it is properly recycled at its end-of-life. The parametric method also indicates the relative influence of various parameters such as reuse rate, number of interventions, transport distances and waste treatment. The manufacturers can use this LCA study as a retrospective assessment to validate the relevance of design choices, but also as target-driven product management support to know hot-spots in the product’ life cycle management. This study will hopefully inspire other designers and manufacturers and accelerate the transition towards a sustainable built environment.