Messaoud Bahoura
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Messaoud Bahoura has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Sangram K. Pradhan
Center for Materials Research, Norfolk State University, Norfolk, VA 23504, USA
8 shared publications - Makhes K. Behera
Center for Materials Research, Norfolk State University, Norfolk, USA
6 shared publications - Kelsea A. Yarbrough
Center for Materials Research, Norfolk State University, Norfolk, VA 23504, USA
4 shared publications - Clifford F. Denize
Center for Materials Research, Norfolk State University, Norfolk, USA
3 shared publications - Jacob Strimaitis
Center for Materials Research, Norfolk State University, 700 Park Ave., Norfolk, VA 23504, USA
3 shared publications - Jasmine Beckford
Center for Materials Research, Norfolk State University 1 , 700 Park Avenue, Norfolk, Virginia 23504, USA
3 shared publications
Latest Publications
- Open Access
- 10 August 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Semi-solid-state electrochromic devices based on poly(3-hexylthiophene) thin films and commercial UV-curable resins for low-power applications
- 10 August 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessSemi-solid-state electrochromic devices based on poly(3-hexylthiophene) thin films and commercial UV-curable resins for low-power applications
- Open Access
- 5 August 2026
- Published by MDPI AG in Preprints.org
Silver Nanowire-Gold Thin-Film Hybrid SERS Substrates for Enhanced Detection and Discrimination of Breast Cancer Cells
The development of highly sensitive surface-enhanced Raman spectroscopy (SERS) substrates is essential for detecting cancer-associated biomarkers and cellular signa-tures. Here, we developed a SERS-active platform by integrating silver nanowires (AgNWs) onto gold (Au) thin-film and glass substrates for enhanced Raman analysis of cancer cells. Au thin films were deposited on silicon substrates via thermal evapora-tion, followed by AgNW deposition through drop-casting. Human cells were subse-quently immobilized on the AgNW-modified surfaces, and substrate morphology and cell interactions were characterized using field-emission scanning electron microscopy and confocal microscopy. The AgNW networks supported efficient cell adhesion and enabled direct, reproducible SERS measurements. AgNW-coated Au substrates exhib-ited approximately 1500-fold greater Raman enhancement than bare Au films, demonstrating strong plasmonic coupling between AgNWs and the underlying Au layer. The substrates were evaluated using the breast cancer cell line SKBR3, the non-cancerous HEK-293 cell line, and cell culture medium. Distinct spectral differ-ences were observed among samples, reflecting interactions between the nanostruc-tured substrates and cell-specific biochemical constituents. Notably, a characteristic Raman peak at ~1028 cm⁻¹ was detected exclusively in SKBR3 cells on AgNW-based substrates, suggesting a potential biomarker associated with phenylalanine-containing collagen. Overall, AgNW-coated Au thin films provided superior signal enhancement and spectral reproducibility, highlighting their potential for sensitive cancer diagnos-tics and biomedical sensing applications.
- 5 August 2026
- Published by MDPI AG in Preprints.org
Open AccessSilver Nanowire-Gold Thin-Film Hybrid SERS Substrates for Enhanced Detection and Discrimination of Breast Cancer Cells
The development of highly sensitive surface-enhanced Raman spectroscopy (SERS) substrates is essential for detecting cancer-associated biomarkers and cellular signa-tures. Here, we developed a SERS-active platform by integrating silver nanowires (AgNWs) onto gold (Au) thin-film and glass substrates for enhanced Raman analysis of cancer cells. Au thin films were deposited on silicon substrates via thermal evapora-tion, followed by AgNW deposition through drop-casting. Human cells were subse-quently immobilized on the AgNW-modified surfaces, and substrate morphology and cell interactions were characterized using field-emission scanning electron microscopy and confocal microscopy. The AgNW networks supported efficient cell adhesion and enabled direct, reproducible SERS measurements. AgNW-coated Au substrates exhib-ited approximately 1500-fold greater Raman enhancement than bare Au films, demonstrating strong plasmonic coupling between AgNWs and the underlying Au layer. The substrates were evaluated using the breast cancer cell line SKBR3, the non-cancerous HEK-293 cell line, and cell culture medium. Distinct spectral differ-ences were observed among samples, reflecting interactions between the nanostruc-tured substrates and cell-specific biochemical constituents. Notably, a characteristic Raman peak at ~1028 cm⁻¹ was detected exclusively in SKBR3 cells on AgNW-based substrates, suggesting a potential biomarker associated with phenylalanine-containing collagen. Overall, AgNW-coated Au thin films provided superior signal enhancement and spectral reproducibility, highlighting their potential for sensitive cancer diagnos-tics and biomedical sensing applications.
- Open Access
A Novel, Single-Step 3D-Printed Shadow Mask Fabrication Method for TFTs
This work presents a low-cost and scalable method for fabricating thin-film transistors (TFTs) using a single-step, 3D-printed shadow mask approach. Room temperature growth of both aluminum-doped zinc oxide (AZO) thin film was used as the semiconductor channel, and zirconium oxide (ZrO2) as the high-k dielectric, and the films were never exposed to any post-annealing treatment. Structural and morphological characterization confirmed smooth, compact films with stable dielectric behavior. Electrical measurements revealed a field-effect mobility of 13.1 cm2/V·s, a threshold voltage of ~4.1 V, and an on/off ratio of ~104, validating effective gate modulation and drain current saturation. The off-state current, estimated from AZO conductivity measurements, was ~10−10 A, while the on-state current reached ~10−6 A. Benchmarking against state-of-the-art devices shows that these transistors rival ALD-processed IGZO TFTs and significantly outperform reported indium-free ZnO/AZO devices, while avoiding scarce indium and costly high-temperature or photolithographic processing. These findings establish 3D-printed shadow masks as a practical alternative to conventional lithography for oxide TFT fabrication. The method offers high device performance with simplified, indium-free, and room-temperature processing, underscoring its potential for scalable, transparent, and flexible electronics.
Open AccessA Novel, Single-Step 3D-Printed Shadow Mask Fabrication Method for TFTs
This work presents a low-cost and scalable method for fabricating thin-film transistors (TFTs) using a single-step, 3D-printed shadow mask approach. Room temperature growth of both aluminum-doped zinc oxide (AZO) thin film was used as the semiconductor channel, and zirconium oxide (ZrO2) as the high-k dielectric, and the films were never exposed to any post-annealing treatment. Structural and morphological characterization confirmed smooth, compact films with stable dielectric behavior. Electrical measurements revealed a field-effect mobility of 13.1 cm2/V·s, a threshold voltage of ~4.1 V, and an on/off ratio of ~104, validating effective gate modulation and drain current saturation. The off-state current, estimated from AZO conductivity measurements, was ~10−10 A, while the on-state current reached ~10−6 A. Benchmarking against state-of-the-art devices shows that these transistors rival ALD-processed IGZO TFTs and significantly outperform reported indium-free ZnO/AZO devices, while avoiding scarce indium and costly high-temperature or photolithographic processing. These findings establish 3D-printed shadow masks as a practical alternative to conventional lithography for oxide TFT fabrication. The method offers high device performance with simplified, indium-free, and room-temperature processing, underscoring its potential for scalable, transparent, and flexible electronics.
- Open Access
- 27 August 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-12
Enhancing the cathodic performance of FeS2 in lithium-ion batteries via sulfurization treatment
Pyrite (FeS2) thin films have attracted significant attention as promising cathode materials for lithium-ion batteries due to their high theoretical capacity, natural abundance, and environmental benignity. However, due to sulfur volatility during film deposition, achieving stoichiometric FeS2 remains challenging. In this study, we investigate the effects of post-deposition sulfurization treatment on the chemical composition, crystal structure, and electrochemical performance of FeS2 thin films synthesized by RF magnetron sputtering. The as-deposited films exhibit notable sulfur deficiency, with an S: Fe atomic ratio of 0.27:1, while a 4-hour sulfurization process improves the ratio to 1.97:1, approaching ideal stoichiometry. X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirm the formation of the pyrite phase, and X-ray diffraction (XRD) and field effect emission scanning electron microscopy (FESEM) reveal enhanced crystallinity and polycrystalline growth. Electrochemical analysis using cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) demonstrates that sulfurized films deliver superior initial and long-term (100-cycle) discharge specific capacities compared to as-deposited samples. The improved performance is attributed to optimized surface stoichiometry, increased reducibility, and the formation of stable intermediate phases. These findings underscore the critical role of sulfurization in tuning the structural and electrochemical properties of FeS2 thin-film cathodes and present a viable strategy for enhancing the performance and stability of conversion-type cathodes in lithium-ion batteries.
- 27 August 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-12
Open AccessEnhancing the cathodic performance of FeS2 in lithium-ion batteries via sulfurization treatment
Pyrite (FeS2) thin films have attracted significant attention as promising cathode materials for lithium-ion batteries due to their high theoretical capacity, natural abundance, and environmental benignity. However, due to sulfur volatility during film deposition, achieving stoichiometric FeS2 remains challenging. In this study, we investigate the effects of post-deposition sulfurization treatment on the chemical composition, crystal structure, and electrochemical performance of FeS2 thin films synthesized by RF magnetron sputtering. The as-deposited films exhibit notable sulfur deficiency, with an S: Fe atomic ratio of 0.27:1, while a 4-hour sulfurization process improves the ratio to 1.97:1, approaching ideal stoichiometry. X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirm the formation of the pyrite phase, and X-ray diffraction (XRD) and field effect emission scanning electron microscopy (FESEM) reveal enhanced crystallinity and polycrystalline growth. Electrochemical analysis using cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) demonstrates that sulfurized films deliver superior initial and long-term (100-cycle) discharge specific capacities compared to as-deposited samples. The improved performance is attributed to optimized surface stoichiometry, increased reducibility, and the formation of stable intermediate phases. These findings underscore the critical role of sulfurization in tuning the structural and electrochemical properties of FeS2 thin-film cathodes and present a viable strategy for enhancing the performance and stability of conversion-type cathodes in lithium-ion batteries.
- Open Access
- 18 February 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-14
Predicting mental health disparities using machine learning for African Americans in Southeastern Virginia
This study examined mental health disparities among African Americans using AI and machine learning for outcome prediction. Analyzing data from African American adults (18–85) in Southeastern Virginia (2016–2020), we found Mood Affective Disorders were most prevalent (41.66%), followed by Schizophrenia Spectrum and Other Psychotic Disorders. Females predominantly experienced mood disorders, with patient ages typically ranging from late thirties to mid-forties. Medicare coverage was notably high among schizophrenia patients, while emergency admissions and comorbidities significantly impacted total healthcare charges. Machine learning models, including gradient boosting, random forest, neural networks, logistic regression, and Naive Bayes, were validated through 100 repeated 5-fold cross-validations. Gradient boosting demonstrated superior predictive performance among all models. Nomograms were developed to visualize risk factors, with gender, age, comorbidities, and insurance type emerging as key predictors. The study revealed higher mental health disorder prevalence compared to national averages, suggesting a potentially greater mental health burden in this population. Despite the limitations of its retrospective design and regional focus, this research provides valuable insights into mental health disparities among African Americans in Southeastern Virginia, particularly regarding demographic and clinical risk factors.
- 18 February 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-14
Open AccessPredicting mental health disparities using machine learning for African Americans in Southeastern Virginia
This study examined mental health disparities among African Americans using AI and machine learning for outcome prediction. Analyzing data from African American adults (18–85) in Southeastern Virginia (2016–2020), we found Mood Affective Disorders were most prevalent (41.66%), followed by Schizophrenia Spectrum and Other Psychotic Disorders. Females predominantly experienced mood disorders, with patient ages typically ranging from late thirties to mid-forties. Medicare coverage was notably high among schizophrenia patients, while emergency admissions and comorbidities significantly impacted total healthcare charges. Machine learning models, including gradient boosting, random forest, neural networks, logistic regression, and Naive Bayes, were validated through 100 repeated 5-fold cross-validations. Gradient boosting demonstrated superior predictive performance among all models. Nomograms were developed to visualize risk factors, with gender, age, comorbidities, and insurance type emerging as key predictors. The study revealed higher mental health disorder prevalence compared to national averages, suggesting a potentially greater mental health burden in this population. Despite the limitations of its retrospective design and regional focus, this research provides valuable insights into mental health disparities among African Americans in Southeastern Virginia, particularly regarding demographic and clinical risk factors.
- 2 July 2024
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 35 (19) , 1-11
Study of dielectric properties in stacked high-k dielectric metal oxide semiconductor capacitor (MOSCAP) devices
- 2 July 2024
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 35 (19) , 1-11
Study of dielectric properties in stacked high-k dielectric metal oxide semiconductor capacitor (MOSCAP) devices
- Open Access
- 1 February 2023
- Published by AIP Publishing in AIP Advances
- Vol. 13 (2) , 025041
Observation of MOSFET-like behavior of a TFT based on amorphous oxide semiconductor channel layer with suitable integration of atomic layered deposited high-k gate dielectrics
A series of different high κ dielectrics such as HfO2, ZrO2, and Al2O3 thin films were studied as an alternative material for the possible replacement of traditional SiO2. These large areas, as well as conformal dielectrics thin films, were grown by the atomic layer deposition technique on a p-type silicon substrate at two different deposition temperatures (150 and 250 °C). Atomic force microscopic study reveals that the surface of the films is very smooth with a measured rms surface roughness value of less than 0.4 nm in some films. After the deposition of the high κ layer, a top metal electrode was deposited onto it to fabricate metal oxide semiconductor capacitor (MOSCAP) structures. The I–V curve reveals that the sample growth at high temperatures exhibits a high resistance value and lower leakage current densities. Frequency-dependent (100 kHz to 1 MHz) C–V characteristics of the MOSCAPs were studied steadily. Furthermore, we have prepared a metal oxide semiconductor field-effect transistor device with Al-doped ZnO as a channel material, and the electrical characteristic of the device was studied. The effect of growth temperature on the structure, surface morphology, crystallinity, capacitance, and dielectric properties of the high κ dielectrics was thoroughly analyzed through several measurement techniques, such as XRD, atomic force microscopy, semiconductor parameter analysis, and ultraviolet-visible spectroscopy.
- 1 February 2023
- Published by AIP Publishing in AIP Advances
- Vol. 13 (2) , 025041
Open AccessObservation of MOSFET-like behavior of a TFT based on amorphous oxide semiconductor channel layer with suitable integration of atomic layered deposited high-k gate dielectrics
A series of different high κ dielectrics such as HfO2, ZrO2, and Al2O3 thin films were studied as an alternative material for the possible replacement of traditional SiO2. These large areas, as well as conformal dielectrics thin films, were grown by the atomic layer deposition technique on a p-type silicon substrate at two different deposition temperatures (150 and 250 °C). Atomic force microscopic study reveals that the surface of the films is very smooth with a measured rms surface roughness value of less than 0.4 nm in some films. After the deposition of the high κ layer, a top metal electrode was deposited onto it to fabricate metal oxide semiconductor capacitor (MOSCAP) structures. The I–V curve reveals that the sample growth at high temperatures exhibits a high resistance value and lower leakage current densities. Frequency-dependent (100 kHz to 1 MHz) C–V characteristics of the MOSCAPs were studied steadily. Furthermore, we have prepared a metal oxide semiconductor field-effect transistor device with Al-doped ZnO as a channel material, and the electrical characteristic of the device was studied. The effect of growth temperature on the structure, surface morphology, crystallinity, capacitance, and dielectric properties of the high κ dielectrics was thoroughly analyzed through several measurement techniques, such as XRD, atomic force microscopy, semiconductor parameter analysis, and ultraviolet-visible spectroscopy.
- Open Access
- 1 February 2023
- Published by AIP Publishing in AIP Advances
- Vol. 13 (2) , 025249
Influence of oxygen on the optical, electrical, and heating properties of gallium-doped zinc oxide (GZO) films
Thin-film transparent heaters (TFTHs) are gaining popularity in optoelectronics and a variety of domestic applications, including smart windows, car defrosters, and other devices. The deposition and characterization of TFTHs made of gallium-doped zinc oxide (GZO) are presented in this work. GZO thin films were deposited via pulsed laser deposition on glass substrates with varying oxygen partial pressures from 0 to 10 mTorr during deposition. The samples demonstrated very low sheet resistance values between 5 and 17 Ω/sq from 0 to 10 mTorr, respectively. UV/vis transmission spectra revealed that TFTHs have a high optical transparency above 80%. GZO-based TFTHs demonstrated a consistent and repeatable joule heating effect, with temperatures reaching 76 °C with a low input voltage of 10 V. This research could guide the future use of GZO as a transparent conducting oxide material for many potential cost-effective applications from low-powered electronics to lightweight and wearable devices.
- 1 February 2023
- Published by AIP Publishing in AIP Advances
- Vol. 13 (2) , 025249
Open AccessInfluence of oxygen on the optical, electrical, and heating properties of gallium-doped zinc oxide (GZO) films
Thin-film transparent heaters (TFTHs) are gaining popularity in optoelectronics and a variety of domestic applications, including smart windows, car defrosters, and other devices. The deposition and characterization of TFTHs made of gallium-doped zinc oxide (GZO) are presented in this work. GZO thin films were deposited via pulsed laser deposition on glass substrates with varying oxygen partial pressures from 0 to 10 mTorr during deposition. The samples demonstrated very low sheet resistance values between 5 and 17 Ω/sq from 0 to 10 mTorr, respectively. UV/vis transmission spectra revealed that TFTHs have a high optical transparency above 80%. GZO-based TFTHs demonstrated a consistent and repeatable joule heating effect, with temperatures reaching 76 °C with a low input voltage of 10 V. This research could guide the future use of GZO as a transparent conducting oxide material for many potential cost-effective applications from low-powered electronics to lightweight and wearable devices.
- Open Access
The Effects of Graphene Oxide and Reduced Graphene Oxide Conductive Additives on Activated Carbon Supercapacitors
With their relative ease of production and coupled strong surface functionality and electrical conductivity properties, graphene oxide (GO) and reduced graphene oxide (rGO) are exciting, yet overlooked, graphene-like additive prospects for activated carbon (AC) electrodes in supercapacitors. In this work, we incorporated small amounts of synthesized GO and rGO in AC electrodes via a simple mixing procedure to explore their effects. In addition to materials characterizations, symmetric supercapacitors were made from these electrodes and tested across current densities ranging from 0.1–10 A g−1 and across 10,000 additional charge-discharge cycles at 2 A g−1. Performance measurements indicate that GO and rGO enhance the rate resistance and capacity, respectively, of AC electrodes, but these effects are modest and do not prevent increases in internal resistance over the course of 10,000 cycles. The overall ineffectuality of GO and rGO is reasoned to be due to their isolation and infrequency as a result of the relatively impotent distribution method used.
Open AccessThe Effects of Graphene Oxide and Reduced Graphene Oxide Conductive Additives on Activated Carbon Supercapacitors
With their relative ease of production and coupled strong surface functionality and electrical conductivity properties, graphene oxide (GO) and reduced graphene oxide (rGO) are exciting, yet overlooked, graphene-like additive prospects for activated carbon (AC) electrodes in supercapacitors. In this work, we incorporated small amounts of synthesized GO and rGO in AC electrodes via a simple mixing procedure to explore their effects. In addition to materials characterizations, symmetric supercapacitors were made from these electrodes and tested across current densities ranging from 0.1–10 A g−1 and across 10,000 additional charge-discharge cycles at 2 A g−1. Performance measurements indicate that GO and rGO enhance the rate resistance and capacity, respectively, of AC electrodes, but these effects are modest and do not prevent increases in internal resistance over the course of 10,000 cycles. The overall ineffectuality of GO and rGO is reasoned to be due to their isolation and infrequency as a result of the relatively impotent distribution method used.
- Open Access
- 23 February 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-14
Electrochemical evaluation of porous CaFe2O4 anode material prepared via solution combustion synthesis at increasing fuel-to-oxidizer ratios and calcination temperatures
The drawbacks of common anodes in lithium-ion batteries (LIBs) and hybrid supercapacitors (HSCs), such as the high voltage plateau of Li4Ti5O12 (1.55 V vs. Li/Li+) and the moderate capacity of graphite (372 mAh-g-1), have established a need for better materials. Conversion materials, and in particular iron oxide and CaFe2O4 (CFO), have amassed recent attention as potential anode replacements. In this study, we evaluate the material and electrochemical effects of the solution combustion synthesis (SCS) of porous CFO across novel fuel-to-oxidizer ratios and calcination temperatures. We demonstrate that nearly doubling the amount of fuel used during synthesis increases capacities between 120 and 150% at high current densities (~ 1000 mA-g-1) and across 500 additional charging-discharging cycles, an effect brought on in part by enhanced compositional purity in these samples. However, in order to ensure long-term cyclic stability, it is necessary to also calcine porous CFO to 900 °C to enhance crystallite size, particle size and spacing, and compositional purity.
- 23 February 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-14
Open AccessElectrochemical evaluation of porous CaFe2O4 anode material prepared via solution combustion synthesis at increasing fuel-to-oxidizer ratios and calcination temperatures
The drawbacks of common anodes in lithium-ion batteries (LIBs) and hybrid supercapacitors (HSCs), such as the high voltage plateau of Li4Ti5O12 (1.55 V vs. Li/Li+) and the moderate capacity of graphite (372 mAh-g-1), have established a need for better materials. Conversion materials, and in particular iron oxide and CaFe2O4 (CFO), have amassed recent attention as potential anode replacements. In this study, we evaluate the material and electrochemical effects of the solution combustion synthesis (SCS) of porous CFO across novel fuel-to-oxidizer ratios and calcination temperatures. We demonstrate that nearly doubling the amount of fuel used during synthesis increases capacities between 120 and 150% at high current densities (~ 1000 mA-g-1) and across 500 additional charging-discharging cycles, an effect brought on in part by enhanced compositional purity in these samples. However, in order to ensure long-term cyclic stability, it is necessary to also calcine porous CFO to 900 °C to enhance crystallite size, particle size and spacing, and compositional purity.