Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Maje Alhaji Haruna has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Influence of Nanoparticle Size Distributions on the (in)Stability and Rheology of Colloidal SiO2 Dispersions and HPAM/SiO2 Nanofluid Hybrids

    by Maje Alhaji Haruna, Saminu Musa Magami

    This study investigated the relationship between variations in the size distribution and the specific surface area of SiO2 nanoparticles and the in(stability) and rheology of their colloidal dispersions and their resulting silica-poly(acrylamide) hybrids. Thus, SiO2 nanoparticles with size distribution in the range 40-173 nm, corresponding to 70-26 m2/g of specific surface area, were used in the studies. The results show a correlation between the average particle size distribution/the specific surface area of silica nanoparticles with the in(stability) and the rheology of their dispersions, such that an increase in the particle size distribution from 40 to 173 nm corresponds to a decrease in dispersion instability index from 0.913 to 0.112. However, in the silica-poly(acrylamide) hybrids, a change in the particle size distribution from 40 to 173 nm corresponds to an increase in the nanofluid instability index from 0.1913 to 0.929. In the hybrid materials, interactions between polymer chains and nanoparticles lead to size-induced stability and rheological behaviour, such that the broadening of the FTIR peak around 1,000 cm-1 in the nanohybrids was related to an Si-O-H bending vibration that arose because of dominating hydrogen bonding arising from the interaction of the hydroxyl groups and the amide groups in the polymer. The rheological characteristics of the hybrid nanofluids show that the relative viscosity and shear sensitivity of the colloidal dispersions or their hybrids can be tailored by the average particle size distribution of the nanoparticles.


  • Surface functionalized Fe3O4‐polyacrylamide dispersion for improved oil recovery at harsh conditions

    by Maje Alhaji Haruna, Dong‐Sheng Wen

    With the growing demand for energy supply and the natural decline of oil reservoirs, the development of new enhanced oil recovery (EOR) techniques become more and more critical. Polymer flooding EOR is one of the most successful chemical EOR methods but suffers many drawbacks at high temperatures and high salinity (HT‐HS) conditions. Superparamagnetic nanoparticles (NPs) have been recently investigated for subsurface applications, including in EOR, due to their unique physicochemical properties. Their applicability under harsh reservoir conditions, however, is yet to be examined. In this work, a novel approach is developed to synthesize superparamagnetic Fe3O4 (NPs) with unique surface functionalization (SMag‐NPs) and to form stable polyacrylamide (PAM) dispersions (SMag‐NPs‐PAM). Both stability and core flooding experiment results demonstrate the promising future of the new dispersion. The SMag‐NPs‐PAM dispersion is not only stable at HT‐HS conditions, but also show excellent EOR capability at HT‐HS by recovering, 61.72% of the initial oil quantity, which is significantly higher than those from conventinal NPs‐PAM disperison and pure PAM fluid. These findings show the promising application potential of SMag‐NPs‐PAM for improving oil recovery in challenging HT‐HS reservoir conditions.


  • Open Access

    Advancements in Clay Materials for Trace Level Determination and Remediation of Phenols from Wastewater: A Review

    by Zakariyya Uba Zango, Muhammad Nur’hafiz Rozaini, Noor Hana Hanif Abu Bakar, Muttaqa Uba Zango, Maje Alhaji Haruna, John Ojur Dennis, Ahmed Alsadig, Khalid Hassan Ibnaouf, Osamah A. Aldaghri, Ismael Abdalla Wadi

    The wide spread of phenols and their toxicity in the environment pose a severe threat to the existence and sustainability of living organisms. Rapid detection of these pollutants in wastewaters has attracted the attention of researchers from various fields of environmental science and engineering. Discoveries regarding materials and method developments are deemed necessary for the effective detection and remediation of wastewater. Although various advanced materials such as organic and inorganic materials have been developed, secondary pollution due to material leaching has become a major concern. Therefore, a natural-based material is preferable. Clay is one of the potential natural-based sorbents for the detection and remediation of phenols. It has a high porosity and polarity, good mechanical strength, moisture resistance, chemical and thermal stability, and cation exchange capacity, which will benefit the detection and adsorptive removal of phenols. Several attempts have been made to improve the capabilities of natural clay as sorbent. This manuscript will discuss the potential of clays as sorbents for the remediation of phenols. The activation, modification, and application of clays have been discussed. The achievements, challenges, and concluding remarks were provided.


  • Effects of salinity on the onset of elastic turbulence in swirling flow and curvilinear microchannels

    by Guice Yao, Jin Zhao, Haie Yang, Maje Alhaji Haruna, Dongsheng Wen

    Elastic turbulence, which is sensitive to geometry and polymer rheology, has shown great potential for improving the performance of mixing, heat transfer, and even oil recovery. Recent studies showed the importance of the rheological properties of polymer solutions on the onset of elastic turbulence. However, variations of rheological properties based on polymer sensitivities such as salinity and its corresponding effects on the elastic turbulence have not been revealed. This work investigated systematically the effects of salinity on the onset of elastic turbulence in both swirling flow and curvilinear microchannels. The variations of statistical properties, such as probability distribution functions (PDFs) and power spectral density of injected power (PSD), were analyzed for characterization. The onset conditions of elastic turbulence are postponed by high salinity, which is consistent with the mixing performance in a curvilinear microchannel. A salinity independent power-law exponent at a value of −4.3 is observed in a fully developed elastic regime for all polymer solutions. Particularly, the diffusion of fluorescein at a low flow rate in the microchannel is possible due to the existence of a steady secondary flow before the onset of elastic instability.


  • Open Access

    Stabilization of Polymer Nanocomposites in High-Temperature and High-Salinity Brines

    by Maje Alhaji Haruna, Dongsheng Wen

    Stabilization of polymer nanocomposites in aqueous environment with high salinity has been a constant challenge for their applications. This work aimed to improve the stability of graphene oxide (GO) polyacrylamide nanocomposites at high-temperature and high-ionic-strength brines. GO was synthesized via a modified Hummers’ method and the copolymer of acrylamide (COPAM) was obtained via free-radical polymerization. The covalent functionalization of COPAM with the partially reduced GO (rGO) was successfully achieved. 1,3-Propane sultone was used to further functionalize the obtained rGO–COPAM composites to accomplish the zwitterionic character on the rGO–COPAM surface to get a material with excellent temperature stability and dispersibility in the presence of high ionic strength brines. The synthesized materials were characterized by 1H NMR, gel permeation chromatography, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy analysis, and so forth. The thermal stability of the dispersion at 80 °C for 120 days was observed by visual inspection and spectroscopic analysis. The results showed that the zwitterionic polymer produced excellent brine stability with GO nanosheets and suggested promising applications of zwitterionic polyacrylamide–GO systems especially for enhanced oil recovery.


  • Improved rheology and high‐temperature stability of hydrolyzed polyacrylamide using graphene oxide nanosheet

    by Maje Alhaji Haruna, Shahid Pervaiz, Zhongliang Hu, Ehsan Nourafkan, Dongsheng Wen

    Hydrolyzed polyacrylamide (HPAM) is a polymer that extensively used in chemical industry and hydrocarbon extraction and refinery processes, but suffers a common problem of high‐temperature instability. This study improved high‐temperature rheological characteristics of HPAM by using novel graphene oxide (GO) nanosheets. Stable GO dispersions in aqueous HPAM were formulated, and their dynamic and viscoelastic behaviors were studied. The results showed that the addition of GO significantly increased the viscosities and high‐temperature stability of the base polymer fluid, as well as the elastic properties of the dispersion. Spectral data indicated the formation of covalent linkages and electrostatic hydrogen bonding between the GO and the HPAM functional groups, leading to enhanced stability and viscosity that is beneficial for high‐temperature oil recovery. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47582.