Byoung-Hwa Kwon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Byoung-Hwa Kwon has a total of 90 co-authors. Here are the top co-authors by number of shared publications:
Chul Woong Joo
Reality Display Research Section, Electronics and Telecommunications Research Institute (ETRI), Daejeon 34129, Republic of Korea
9 shared publicationsHyunsu Cho
Reality Display Research Section, Electronics and Telecommunications Research Institute (ETRI), Daejeon 34129, Republic of Korea
6 shared publications- Hyunsu Cho
Electronics and Telecommunications Research Institute (ETRI), Daejeon, Republic of Korea
6 shared publications Jin-Wook Shin
Electronics and Telecommunications Research Institute (ETRI), Daejeon, Republic of Korea
6 shared publicationsNam Sung Cho
Electronics and Telecommunications Research Institute (ETRI), Daejeon, Republic of Korea
6 shared publications- Nam Sung Cho
Flexible Device Research Group, Electronics and Telecommunications Research Institute (ETRI), 218 Gajeong-ro, Yuseong-gu, Daejeon, 34129, South Korea
5 shared publications
Latest Publications
- Open Access
- 15 October 2026
- Published by Springer Nature in npj Flexible Electronics
Low-temperature monolithic integration of patterned distributed Bragg reflectors for high-resolution QD-OLED microdisplays
- 15 October 2026
- Published by Springer Nature in npj Flexible Electronics
Open AccessLow-temperature monolithic integration of patterned distributed Bragg reflectors for high-resolution QD-OLED microdisplays
- 6 January 2023
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 1 (1) , 289-297
Efficient Quantum Dot Color Conversion Layer with Mixed Spherical/Rod-Shaped Scattering Particles
- 6 January 2023
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 1 (1) , 289-297
Efficient Quantum Dot Color Conversion Layer with Mixed Spherical/Rod-Shaped Scattering Particles
- 8 December 2022
- Published by Wiley in ETRI Journal
- Vol. 45 (6) , 1056-1064
Correlation between optimized thicknesses of capping layer and thin metal electrode for efficient top‐emitting blue organic light‐emitting diodes
The optical properties of the materials composing organic light‐emitting diodes (OLEDs) are considered when designing the optical structure of OLEDs. Optical design is related to the optical properties, such as the efficiency, emission spectra, and color coordinates of OLED devices because of the microcavity effect in top‐emitting OLEDs. In this study, the properties of top‐emitting blue OLEDs were optimized by adjusting the thicknesses of the thin metal layer and capping layer (CPL). Deep blue emission was achieved in an OLED structure with a second cavity length, even when the transmittance of the thin metal layer was high. The thin metal film thickness ranges applicable to OLEDs with a second microcavity structure are wide. Instead, the thickness of the thin metal layer determines the optimized thickness of the CPL for high efficiency. A thinner metal layer means that higher efficiency can be obtained in OLED devices with a second microcavity structure. In addition, OLEDs with a thinner metal layer showed less color change as a function of the viewing angle.
- 8 December 2022
- Published by Wiley in ETRI Journal
- Vol. 45 (6) , 1056-1064
Correlation between optimized thicknesses of capping layer and thin metal electrode for efficient top‐emitting blue organic light‐emitting diodes
The optical properties of the materials composing organic light‐emitting diodes (OLEDs) are considered when designing the optical structure of OLEDs. Optical design is related to the optical properties, such as the efficiency, emission spectra, and color coordinates of OLED devices because of the microcavity effect in top‐emitting OLEDs. In this study, the properties of top‐emitting blue OLEDs were optimized by adjusting the thicknesses of the thin metal layer and capping layer (CPL). Deep blue emission was achieved in an OLED structure with a second cavity length, even when the transmittance of the thin metal layer was high. The thin metal film thickness ranges applicable to OLEDs with a second microcavity structure are wide. Instead, the thickness of the thin metal layer determines the optimized thickness of the CPL for high efficiency. A thinner metal layer means that higher efficiency can be obtained in OLED devices with a second microcavity structure. In addition, OLEDs with a thinner metal layer showed less color change as a function of the viewing angle.
- Open Access
- 10 January 2022
- Published by Springer Nature in Nature Communications
- Vol. 13 (1) , 1-9
Metal oxide charge transfer complex for effective energy band tailoring in multilayer optoelectronics
Metal oxides are intensively used for multilayered optoelectronic devices such as organic light-emitting diodes (OLEDs). Many approaches have been explored to improve device performance by engineering electrical properties. However, conventional methods cannot enable both energy level manipulation and conductivity enhancement for achieving optimum energy band configurations. Here, we introduce a metal oxide charge transfer complex (NiO:MoO3-complex), which is composed of few-nm-size MoO3 domains embedded in NiO matrices, as a highly tunable carrier injection material. Charge transfer at the finely dispersed interfaces of NiO and MoO3 throughout the entire film enables effective energy level modulation over a wide work function range of 4.47 – 6.34 eV along with enhanced electrical conductivity. The high performance of NiO:MoO3-complex is confirmed by achieving 189% improved current efficiency compared to that of MoO3-based green OLEDs and also an external quantum efficiency of 17% when applied to blue OLEDs, which is superior to 1,4,5,8,9,11-hexaazatriphenylene-hexacarbonitrile-based conventional devices.
- 10 January 2022
- Published by Springer Nature in Nature Communications
- Vol. 13 (1) , 1-9
Open AccessMetal oxide charge transfer complex for effective energy band tailoring in multilayer optoelectronics
Metal oxides are intensively used for multilayered optoelectronic devices such as organic light-emitting diodes (OLEDs). Many approaches have been explored to improve device performance by engineering electrical properties. However, conventional methods cannot enable both energy level manipulation and conductivity enhancement for achieving optimum energy band configurations. Here, we introduce a metal oxide charge transfer complex (NiO:MoO3-complex), which is composed of few-nm-size MoO3 domains embedded in NiO matrices, as a highly tunable carrier injection material. Charge transfer at the finely dispersed interfaces of NiO and MoO3 throughout the entire film enables effective energy level modulation over a wide work function range of 4.47 – 6.34 eV along with enhanced electrical conductivity. The high performance of NiO:MoO3-complex is confirmed by achieving 189% improved current efficiency compared to that of MoO3-based green OLEDs and also an external quantum efficiency of 17% when applied to blue OLEDs, which is superior to 1,4,5,8,9,11-hexaazatriphenylene-hexacarbonitrile-based conventional devices.
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Advanced Molecular Simulation Method for Boron Based Thermally Activated Delayed Fluorescence Materials by Using Autoqsar Calculation
Various boron-based thermally activated delayed fluorescence materials have been reported recently for the efficient organic light-emitting diodes. Especially, the materials exhibiting multi-resonance property are actively reported due to their high efficiency and narrow emission. However, as the structure becomes more complex and larger, the development time is greatly increased, and the accuracy of the existing simulation is low, causing great research difficulties. Here, AutoQSAR based calculation for the organic light-emitting diodes materials is reported. The calculation and analysis methods are established and various properties are calculated to validate these methods. As a result, it is possible to obtain more than 10 times higher accuracy and 100 times faster calculation speed compared to conventional calculation. In particular, even boron-based materials exhibiting multi-resonance property, which indicates large errors in conventional calculation, showed high accuracy, enabling more accurate prediction.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessAdvanced Molecular Simulation Method for Boron Based Thermally Activated Delayed Fluorescence Materials by Using Autoqsar Calculation
Various boron-based thermally activated delayed fluorescence materials have been reported recently for the efficient organic light-emitting diodes. Especially, the materials exhibiting multi-resonance property are actively reported due to their high efficiency and narrow emission. However, as the structure becomes more complex and larger, the development time is greatly increased, and the accuracy of the existing simulation is low, causing great research difficulties. Here, AutoQSAR based calculation for the organic light-emitting diodes materials is reported. The calculation and analysis methods are established and various properties are calculated to validate these methods. As a result, it is possible to obtain more than 10 times higher accuracy and 100 times faster calculation speed compared to conventional calculation. In particular, even boron-based materials exhibiting multi-resonance property, which indicates large errors in conventional calculation, showed high accuracy, enabling more accurate prediction.
- Open Access
- 11 November 2021
- Published by Wiley in ETRI Journal
- Vol. 43 (6) , 1093-1102
Design of white tandem organic light‐emitting diodes for full‐color microdisplay with high current efficiency and high color gamut
- 11 November 2021
- Published by Wiley in ETRI Journal
- Vol. 43 (6) , 1093-1102
Open AccessDesign of white tandem organic light‐emitting diodes for full‐color microdisplay with high current efficiency and high color gamut
- 10 November 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (46) , 55391-55402
Organic/Inorganic Hybrid Thin-Film Encapsulation Using Inkjet Printing and PEALD for Industrial Large-Area Process Suitability and Flexible OLED Application
We present herein the first report of organic/inorganic hybrid thin-film encapsulation (TFE) developed as an encapsulation process for mass production in the display industry. The proposed method was applied to fabricate a top-emitting organic light-emitting device (TEOLED). The organic/inorganic hybrid TFE has a 1.5 dyad structure and was fabricated using plasma-enhanced atomic layer deposition (PEALD) and inkjet printing (IJP) processes that can be applied to mass production operations in the industry. Currently, industries use inorganic thin films such as SiNx and SiOxNy fabricated through plasma-enhanced chemical vapor deposition (PECVD), which results in film thickness >1 μm; however, in the present work, an Al2O3 inorganic thin film with a thickness of 30 nm was successfully fabricated using ALD. Furthermore, to decouple the crack propagation between the adjacent Al2O3 thin films, an acrylate-based polymer layer was printed between these layers using IJP to finally obtain the 1.5 dyad hybrid TFE. The proposed method can be applied to optoelectronic devices with various form factors such as rollables and stretchable displays. The hybrid TFE developed in this study has a transmittance of 95% or more in the entire visible light region and a very low surface roughness of less than 1 nm. In addition, the measurement of water vapor transmission rate (WVTR) using commercial MOCON equipment yielded a value of 5 × 10–5 gm–2 day–1 (37.8 °C and 100% RH) or less, approaching the limit of the measuring equipment. The TFE was applied to TEOLEDs and the improvement in optical properties of the device was demonstrated. The OLED panel was manufactured and operated stably, showing excellent consistency even in the actual display manufacturing process. The panel operated normally even after 363 days in air. The proposed organic/inorganic hybrid encapsulant manufacturing process is applicable to the display industry and this study provides basic guidelines that can serve as a foothold for the development of various technologies in academia and industry alike.
- 10 November 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (46) , 55391-55402
Organic/Inorganic Hybrid Thin-Film Encapsulation Using Inkjet Printing and PEALD for Industrial Large-Area Process Suitability and Flexible OLED Application
We present herein the first report of organic/inorganic hybrid thin-film encapsulation (TFE) developed as an encapsulation process for mass production in the display industry. The proposed method was applied to fabricate a top-emitting organic light-emitting device (TEOLED). The organic/inorganic hybrid TFE has a 1.5 dyad structure and was fabricated using plasma-enhanced atomic layer deposition (PEALD) and inkjet printing (IJP) processes that can be applied to mass production operations in the industry. Currently, industries use inorganic thin films such as SiNx and SiOxNy fabricated through plasma-enhanced chemical vapor deposition (PECVD), which results in film thickness >1 μm; however, in the present work, an Al2O3 inorganic thin film with a thickness of 30 nm was successfully fabricated using ALD. Furthermore, to decouple the crack propagation between the adjacent Al2O3 thin films, an acrylate-based polymer layer was printed between these layers using IJP to finally obtain the 1.5 dyad hybrid TFE. The proposed method can be applied to optoelectronic devices with various form factors such as rollables and stretchable displays. The hybrid TFE developed in this study has a transmittance of 95% or more in the entire visible light region and a very low surface roughness of less than 1 nm. In addition, the measurement of water vapor transmission rate (WVTR) using commercial MOCON equipment yielded a value of 5 × 10–5 gm–2 day–1 (37.8 °C and 100% RH) or less, approaching the limit of the measuring equipment. The TFE was applied to TEOLEDs and the improvement in optical properties of the device was demonstrated. The OLED panel was manufactured and operated stably, showing excellent consistency even in the actual display manufacturing process. The panel operated normally even after 363 days in air. The proposed organic/inorganic hybrid encapsulant manufacturing process is applicable to the display industry and this study provides basic guidelines that can serve as a foothold for the development of various technologies in academia and industry alike.
- 1 May 2021
- Published by Wiley in SID Symposium Digest of Technical Papers
- Vol. 52 (1) , 379-382
30‐1: Invited Paper: High Aspect Ratio OLED Microdisplay with Pin Mirror Lens for Small Form Factor AR Devices
In this paper, we developed the high aspect ratio color OLED microdisplay and combined with the pin mirror lens, providing a wide FoV AR device in a small form factor. The white OLED exhibited the luminance of 14,072 cd/m 2 and current efficiency of 33.8 cd/A at 9 V. To reduce optical crosstalk, color filters were directly patterned on the chip. The high aspect ratio OLED microdisplay was then combined with the pin mirror lens, resulting in maximum horizontal FoV 46.6° at the lens thickness of 4 mm. By using such a simple display module, we successfully demonstrated the small form factor AR device.
- 1 May 2021
- Published by Wiley in SID Symposium Digest of Technical Papers
- Vol. 52 (1) , 379-382
30‐1: Invited Paper: High Aspect Ratio OLED Microdisplay with Pin Mirror Lens for Small Form Factor AR Devices
In this paper, we developed the high aspect ratio color OLED microdisplay and combined with the pin mirror lens, providing a wide FoV AR device in a small form factor. The white OLED exhibited the luminance of 14,072 cd/m 2 and current efficiency of 33.8 cd/A at 9 V. To reduce optical crosstalk, color filters were directly patterned on the chip. The high aspect ratio OLED microdisplay was then combined with the pin mirror lens, resulting in maximum horizontal FoV 46.6° at the lens thickness of 4 mm. By using such a simple display module, we successfully demonstrated the small form factor AR device.
- 1 January 2021
- Published by Elsevier in Journal of Industrial and Engineering Chemistry
- Vol. 93, 237-244
A Systematic Study of the Interactions in the Top Electrode/Capping Layer/Thin Film Encapsulation of Transparent OLEDs
- 1 January 2021
- Published by Elsevier in Journal of Industrial and Engineering Chemistry
- Vol. 93, 237-244
A Systematic Study of the Interactions in the Top Electrode/Capping Layer/Thin Film Encapsulation of Transparent OLEDs
- 1 December 2019
- Published by Elsevier in Journal of Industrial and Engineering Chemistry
- Vol. 80, 490-496
Spontaneously formed organic wrinkle structure for top-emitting organic light emitting diodes
- 1 December 2019
- Published by Elsevier in Journal of Industrial and Engineering Chemistry
- Vol. 80, 490-496
Spontaneously formed organic wrinkle structure for top-emitting organic light emitting diodes