Joani Mato
Research Subjects
Joani Mato has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Mark S. Gordon
Department of Chemistry and Ames National Laboratory
3 shared publications - Demeter Tzeli
Laboratory of Physical Chemistry, Department of Chemistry, National and Kapodistrian University of Athens, Panepistimiopolis Zografou, 157 84 Athens, Greece
2 shared publications - Diogo Santos-Martins
Scripps Research Institute
2 shared publications - Emilie Brigitte Guidez
Department of Chemistry
2 shared publications - Manuel Augusto Llanos
Department of Integrative Structural and Computational Biology, The Scripps Research Institute, La Jolla, CA, USA
2 shared publications - Sotiris S. Xantheas
University of Washington
2 shared publications
Latest Publications
- Open Access
- 19 August 2026
- Published by American Chemical Society (ACS) in ChemRxiv
MolScrub: an open-source tool to generate conformers and protonate drug-like molecules
We introduce MolScrub, an open-source Python-based tool to prepare drug-like molecules for structure-based simulations. MolScrub takes common molecular input specifications like SMILES, predicts the protonation states, and generates 3D structures. It is a high-throughput tool, having an average runtime of 0.3 to 0.5 seconds per molecule per CPU core. MolScrub returns as few protomers and conformers as reasonable to avoid feeding high-energy states to downstream simulations. Protonation state assignment includes both pKa prediction for acid-base pairs and tautomer enumeration. During 3D-coordinate generation, MolScrub enumerates 6-membered ring conformations to ensure that the final structure is close to a global minimum. These improved input geometries benefit docking programs that do not change the internal state of small rings. MolScrub was primarily developed to generate high-quality ligand structures to support docking-based virtual screenings but its modules (pKa prediction, tautomer enumeration, and ring geometry corrections) can be used and configured independently to support other applications.
- 19 August 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessMolScrub: an open-source tool to generate conformers and protonate drug-like molecules
We introduce MolScrub, an open-source Python-based tool to prepare drug-like molecules for structure-based simulations. MolScrub takes common molecular input specifications like SMILES, predicts the protonation states, and generates 3D structures. It is a high-throughput tool, having an average runtime of 0.3 to 0.5 seconds per molecule per CPU core. MolScrub returns as few protomers and conformers as reasonable to avoid feeding high-energy states to downstream simulations. Protonation state assignment includes both pKa prediction for acid-base pairs and tautomer enumeration. During 3D-coordinate generation, MolScrub enumerates 6-membered ring conformations to ensure that the final structure is close to a global minimum. These improved input geometries benefit docking programs that do not change the internal state of small rings. MolScrub was primarily developed to generate high-quality ligand structures to support docking-based virtual screenings but its modules (pKa prediction, tautomer enumeration, and ring geometry corrections) can be used and configured independently to support other applications.
- Open Access
- 16 August 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Examining hyperconjugative interactions in the anomeric effect of six-membered rings using Quasi-atomic Orbital Analysis
We investigate the anomeric effect of 6-membered rings, i.e. the axial-over-equatorial conformational preference of polar substituents in aliphatic heterocycles, from a molecular orbital perspective. Using several levels of theory and the quasi-atomic orbital analysis (QUAO), the direct pairwise interactions between the p-orbitals of the ring heteroatom and the 𝜎 bond of the substituent atom are examined. The anomeric effect has been traditionally attributed to hyperconjugative interactions, though more recently, evidence for the electrostatic argument has emerged. While not excluding the role of electrostatics, this analysis showed strong evidence for the presence of hyperconjugative interactions in the anomeric effect. Our analysis presents direct evidence for the interaction for the lone pair orbitals of the ring heteroatom and the substituent 𝜎 bond, which is stronger in axial conformation. Moreover, examining the populations of the respective localized orbitals showed a small transfer of electron density from the lone pair to the 𝜎∗ orbitals. We also observed a reduction in the strength of the ring-substituent 𝜎 bond in the axial conformation, further suggesting the transfer of electron density to the 𝜎∗ orbital.
- 16 August 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessExamining hyperconjugative interactions in the anomeric effect of six-membered rings using Quasi-atomic Orbital Analysis
We investigate the anomeric effect of 6-membered rings, i.e. the axial-over-equatorial conformational preference of polar substituents in aliphatic heterocycles, from a molecular orbital perspective. Using several levels of theory and the quasi-atomic orbital analysis (QUAO), the direct pairwise interactions between the p-orbitals of the ring heteroatom and the 𝜎 bond of the substituent atom are examined. The anomeric effect has been traditionally attributed to hyperconjugative interactions, though more recently, evidence for the electrostatic argument has emerged. While not excluding the role of electrostatics, this analysis showed strong evidence for the presence of hyperconjugative interactions in the anomeric effect. Our analysis presents direct evidence for the interaction for the lone pair orbitals of the ring heteroatom and the substituent 𝜎 bond, which is stronger in axial conformation. Moreover, examining the populations of the respective localized orbitals showed a small transfer of electron density from the lone pair to the 𝜎∗ orbitals. We also observed a reduction in the strength of the ring-substituent 𝜎 bond in the axial conformation, further suggesting the transfer of electron density to the 𝜎∗ orbital.
- Open Access
- 16 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Meeko: molecule parameterization and software interoperability for docking and beyond
Molecule parametrization is an essential requirement to guarantee the accuracy of simulations. Parametrization includes a proper perception of chemical properties such as bonds, formal charges and protonation states. This includes large biological macromolecules, such as proteins and nucleic acids, and small molecules, such as ligands and co-factors. The structures of proteins and nucleic acids are challenging due to omission of several atoms from the structural model, and from the lack of connectivity and bond order information in the PDB and mmCIF file formats. For small molecules, the very large chemical diversity poses challenges for both validating correctness and providing accurate parameters. These challenges affect various modeling approaches like molecular docking and molecular dynamics. Moreover, several specialized methods (particularly in molecular docking) leverage specific chemical properties to add custom potentials, pseudo-atoms, or manipulate atomic connectivity. To address these challenges, we developed Meeko, a molecular parametrization Python package that leverages the widely used RDKit cheminformatics library for a chemically accurate description of the molecular representation. Small molecules are modeled as single RDKit molecules, and biological macromolecules as multiple RDKit molecules, one for each residue. Meeko is highly customizable and designed to be easily scriptable for high-throughput processing, replacing MGLTools for receptor and ligand preparation.
- 16 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessMeeko: molecule parameterization and software interoperability for docking and beyond
Molecule parametrization is an essential requirement to guarantee the accuracy of simulations. Parametrization includes a proper perception of chemical properties such as bonds, formal charges and protonation states. This includes large biological macromolecules, such as proteins and nucleic acids, and small molecules, such as ligands and co-factors. The structures of proteins and nucleic acids are challenging due to omission of several atoms from the structural model, and from the lack of connectivity and bond order information in the PDB and mmCIF file formats. For small molecules, the very large chemical diversity poses challenges for both validating correctness and providing accurate parameters. These challenges affect various modeling approaches like molecular docking and molecular dynamics. Moreover, several specialized methods (particularly in molecular docking) leverage specific chemical properties to add custom potentials, pseudo-atoms, or manipulate atomic connectivity. To address these challenges, we developed Meeko, a molecular parametrization Python package that leverages the widely used RDKit cheminformatics library for a chemically accurate description of the molecular representation. Small molecules are modeled as single RDKit molecules, and biological macromolecules as multiple RDKit molecules, one for each residue. Meeko is highly customizable and designed to be easily scriptable for high-throughput processing, replacing MGLTools for receptor and ligand preparation.
- 22 September 2022
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 157 (12) , 129901
Publisher’s Note: “The many-body expansion for metals. I. The alkaline earth metals Be, Mg, and Ca” [J. Chem. Phys. 157, 084313 (2022)]
- 22 September 2022
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 157 (12) , 129901
Publisher’s Note: “The many-body expansion for metals. I. The alkaline earth metals Be, Mg, and Ca” [J. Chem. Phys. 157, 084313 (2022)]
- Open Access
- 28 August 2022
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 157 (8) , 084313
The many-body expansion for metals. I. The alkaline earth metals Be, Mg, and Ca
We examine the Many-Body Expansion (MBE) for alkaline earth metal clusters, Ben, Mgn, Can (n = 4, 5, 6) at the MP2, CCSD(T), MRPT2, and MRCI levels of theory. The magnitude of each term in the MBE is evaluated for several geometrical configurations. We find that the behavior of the MBE for these clusters depends strongly on the geometrical arrangement, and, to a lesser extent, on the level of theory used. Another factor that affects the MBE is the in situ (ground or excited) electronic state of the individual atoms in the cluster. For most geometries, the three-body term is the largest, followed by a steady decrease in absolute energy for subsequent terms. Though these systems exhibit non-negligible multi-reference effects, there was little qualitative difference in the MBE expansion when employing single vs. multi-reference methods. Useful insights into the connectivity and stability of these clusters have been drawn from the respective potential energy surfaces and Quasi-Atomic orbitals for the various dimers, trimers, and tetramers. Through these analyses we investigate the similarities and differences in the binding energies of different size clusters for these metals.
- 28 August 2022
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 157 (8) , 084313
Open AccessThe many-body expansion for metals. I. The alkaline earth metals Be, Mg, and Ca
We examine the Many-Body Expansion (MBE) for alkaline earth metal clusters, Ben, Mgn, Can (n = 4, 5, 6) at the MP2, CCSD(T), MRPT2, and MRCI levels of theory. The magnitude of each term in the MBE is evaluated for several geometrical configurations. We find that the behavior of the MBE for these clusters depends strongly on the geometrical arrangement, and, to a lesser extent, on the level of theory used. Another factor that affects the MBE is the in situ (ground or excited) electronic state of the individual atoms in the cluster. For most geometries, the three-body term is the largest, followed by a steady decrease in absolute energy for subsequent terms. Though these systems exhibit non-negligible multi-reference effects, there was little qualitative difference in the MBE expansion when employing single vs. multi-reference methods. Useful insights into the connectivity and stability of these clusters have been drawn from the respective potential energy surfaces and Quasi-Atomic orbitals for the various dimers, trimers, and tetramers. Through these analyses we investigate the similarities and differences in the binding energies of different size clusters for these metals.
- 27 August 2021
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 17 (9) , 5456-5465
Adaptive-Partitioning Multilayer Dynamics Simulations: 1. On-the-Fly Switch between Two Quantum Levels of Theory
We propose to generalize the previously developed two-layer permuted adaptive-partitioning quantum-mechanics/molecular-mechanics (QM/MM), which reclassifies atoms as QM or MM on-the-fly in dynamics simulations, to multilayer adaptive-partitioning algorithms that enable multiple levels of theory. In this work, we formulate two new algorithms that smoothly interpolate the energy between two QM (Q1 and Q2) levels of theory. The first “permuted adaptive-partitioning” scheme is based on the weighted many-body expansion of the potential, as in the adaptive-partitioning QM/MM. Unconventional and potentially more efficient, the second “interpolated adaptive-partitioning” method employs alchemical QM calculations with Q1/Q2-mixed basis sets, Fock matrices, and overlap matrices. To our knowledge, this is the first time that such alchemical calculations are performed in QM, although they are routinely done in MM. Test calculations on water-cluster models show that both new algorithms indeed yield smooth energy curves when water molecules shift between Q1 and Q2.
- 27 August 2021
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 17 (9) , 5456-5465
Adaptive-Partitioning Multilayer Dynamics Simulations: 1. On-the-Fly Switch between Two Quantum Levels of Theory
We propose to generalize the previously developed two-layer permuted adaptive-partitioning quantum-mechanics/molecular-mechanics (QM/MM), which reclassifies atoms as QM or MM on-the-fly in dynamics simulations, to multilayer adaptive-partitioning algorithms that enable multiple levels of theory. In this work, we formulate two new algorithms that smoothly interpolate the energy between two QM (Q1 and Q2) levels of theory. The first “permuted adaptive-partitioning” scheme is based on the weighted many-body expansion of the potential, as in the adaptive-partitioning QM/MM. Unconventional and potentially more efficient, the second “interpolated adaptive-partitioning” method employs alchemical QM calculations with Q1/Q2-mixed basis sets, Fock matrices, and overlap matrices. To our knowledge, this is the first time that such alchemical calculations are performed in QM, although they are routinely done in MM. Test calculations on water-cluster models show that both new algorithms indeed yield smooth energy curves when water molecules shift between Q1 and Q2.
- 10 March 2020
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 124 (13) , 2601-2615
Accuracy of the PM6 and PM7 Methods on Bare and Thiolate-Protected Gold Nanoclusters
Semi-empirical quantum mechanical (SEQM) methods offer an attractive middle ground between fully ab initio quantum chemistry and force-field simulations, allowing for a quantum mechanical treatment of the system at a relatively low computational cost. However, SEQM methods have not been frequently utilized in the study of transition metal systems, mostly due to the difficulty in obtaining reliable parameters. This paper examines the accuracy of PM6 and PM7 semi-empirical methods to predict geometries, ionization potentials, and HOMO-LUMO energy gaps of several bare gold clusters (Aun) and thiolate-protected gold nanoclusters (AuSNCs). Contrary to PM6, the PM7 method can predict qualitatively correct geometries and ionization potentials when compared to DFT. PM6 fails to predict the characteristic gold core and gold-sulfur ligand shell (staple motifs) of the AuSNC structures. Both the PM6 and PM7 methods overestimate the HOMO-LUMO gaps. Overall, PM7 provides a more accurate description of bare gold and gold-thiolate nanoclusters than PM6. Nevertheless, refining the gold parameters could help achieve better quantitative accuracy.
- 10 March 2020
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 124 (13) , 2601-2615
Accuracy of the PM6 and PM7 Methods on Bare and Thiolate-Protected Gold Nanoclusters
Semi-empirical quantum mechanical (SEQM) methods offer an attractive middle ground between fully ab initio quantum chemistry and force-field simulations, allowing for a quantum mechanical treatment of the system at a relatively low computational cost. However, SEQM methods have not been frequently utilized in the study of transition metal systems, mostly due to the difficulty in obtaining reliable parameters. This paper examines the accuracy of PM6 and PM7 semi-empirical methods to predict geometries, ionization potentials, and HOMO-LUMO energy gaps of several bare gold clusters (Aun) and thiolate-protected gold nanoclusters (AuSNCs). Contrary to PM6, the PM7 method can predict qualitatively correct geometries and ionization potentials when compared to DFT. PM6 fails to predict the characteristic gold core and gold-sulfur ligand shell (staple motifs) of the AuSNC structures. Both the PM6 and PM7 methods overestimate the HOMO-LUMO gaps. Overall, PM7 provides a more accurate description of bare gold and gold-thiolate nanoclusters than PM6. Nevertheless, refining the gold parameters could help achieve better quantitative accuracy.
- 18 December 2019
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 22 (3) , 1475-1484
Analytic non-adiabatic couplings for the spin-flip ORMAS method
Analytic non-adiabatic coupling matrix elements (NACME) are derived and implemented for the spin-flip occupation restricted multiple active space configuration interaction (SF-ORMAS-CI) method.
- 18 December 2019
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 22 (3) , 1475-1484
Analytic non-adiabatic couplings for the spin-flip ORMAS method
Analytic non-adiabatic coupling matrix elements (NACME) are derived and implemented for the spin-flip occupation restricted multiple active space configuration interaction (SF-ORMAS-CI) method.
- 15 January 2019
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 123 (6) , 1260-1272
Analytic Gradients for the Spin-Flip ORMAS-CI Method: Optimizing Minima, Saddle Points, and Conical Intersections
Analytic nuclear gradients are derived and implemented for the recently introduced SF-ORMAS-CI (Spin-Flip Occupation Restricted Multiple Active Space CI) method. Like most SF methods, SF-ORMAS-CI successfully describes bond breaking, diradical systems, transition states, and low-lying excited states, without suffering from spin contamination. The availability of analytic gradients now enables the efficient optimization of equilibrium structures in both ground and excited electronic states, as well as the computation of semi-numerical hessians. Therefore, it is now possible to determine minima, transition states, and conical intersections using the SF-ORMAS-CI method without the need for numerical differentiation. In the present study the SF-ORMAS method and gradient are applied to optimize structures for several organic molecules, such as ethylene, azomethane, and trimethylmethylene. In most cases, structures optimized with SF-ORMAS are almost identical to those obtained using other multi-reference methods, despite the lack of dynamic correlation in SF-ORMAS.
- 15 January 2019
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 123 (6) , 1260-1272
Analytic Gradients for the Spin-Flip ORMAS-CI Method: Optimizing Minima, Saddle Points, and Conical Intersections
Analytic nuclear gradients are derived and implemented for the recently introduced SF-ORMAS-CI (Spin-Flip Occupation Restricted Multiple Active Space CI) method. Like most SF methods, SF-ORMAS-CI successfully describes bond breaking, diradical systems, transition states, and low-lying excited states, without suffering from spin contamination. The availability of analytic gradients now enables the efficient optimization of equilibrium structures in both ground and excited electronic states, as well as the computation of semi-numerical hessians. Therefore, it is now possible to determine minima, transition states, and conical intersections using the SF-ORMAS-CI method without the need for numerical differentiation. In the present study the SF-ORMAS method and gradient are applied to optimize structures for several organic molecules, such as ethylene, azomethane, and trimethylmethylene. In most cases, structures optimized with SF-ORMAS are almost identical to those obtained using other multi-reference methods, despite the lack of dynamic correlation in SF-ORMAS.
- 10 January 2018
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 20 (4) , 2615-2626
A general spin-complete spin-flip configuration interaction method
A new spin-complete spin-flip configuration interaction (SF-CI) method was developed using the ORMAS-CI algorithm, along with a perturbative correction for capturing dynamic and non-dynamic correlation.
- 10 January 2018
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 20 (4) , 2615-2626
A general spin-complete spin-flip configuration interaction method
A new spin-complete spin-flip configuration interaction (SF-CI) method was developed using the ORMAS-CI algorithm, along with a perturbative correction for capturing dynamic and non-dynamic correlation.