Evgeniy S. Gorlanov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Evgeniy S. Gorlanov has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
A. A. Batrachenko
AO Kazakhstan Electrolyzer Plant
2 shared publicationsB. Sh.-A. Smailov
AO Kazakhstan Electrolyzer Plant
2 shared publications- Evgeniy A. Mushihin
Saint Petersburg Mining University, Saint Petersburg, Russia
2 shared publications - Gregory G. Popov
Saint Petersburg Mining University, Saint Petersburg, Russia
2 shared publications S. N. Fedorov
2 shared publicationsSaint Petersburg Ekspert-Al Llc
2 shared publications
Latest Publications
- 1 January 2026
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 39 (12) , 3017-3025
Study on Corrosion Rate of Anodes with Varying Geometries in Electrolytic Production of Aluminum
- 1 January 2026
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 39 (12) , 3017-3025
Study on Corrosion Rate of Anodes with Varying Geometries in Electrolytic Production of Aluminum
- Open Access
- 1 January 2026
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 39 (2) , 485-491
Low-temperature Synthesis of Composite C-TiB2 Electrodes in Standard Firing Processes and in Molten Salt Electrolysis
In the article the results of laboratory investigations of two versions of low-temperature synthesis for compact composite carbon - titanium carbide/titanium diboride (C – TiC/TiB2) are presented. The article concerns the preliminary examination of the thermodynamic probability of titanium carbide and titanium boride synthesis during the process of standard baking at the temperature of 1050±10ºС in the volume of carbon electrode, which composition contains boron oxide and one of the refractory metals; the synthesis taking place directly during the electrolytic reduction of the melts at the temperature of 965-970°С in the volume of carbon cathode, containing metal oxides, is also examined. After preliminary standard preparation of mixing the initial components (petroleum coke, metallic titanium Ti, titanium oxide TiO2, boron oxide B2O3 and binder), cathode samples were formed, which were calcined under a layer of petroleum coke. Experiments with different holding times during the electrolytic process showed a continuous film of aluminum on the surface of the cathode, which indicates acceptable wettability. The presence of TiC/TiB2 was confirmed by X-ray phase analysis and X-ray structural analysis (SEM-EDS analysis). Innovative technologies presented for the production of composite electrode materials could be used for the synthesis of wide range of the composite products in С – МеС/МеВ2 system. The equivalent value of petroleum coke and oxides of refractory metals allows supposing the short payback period of the use composite cathode blocks in existing pots and in pots under design.
- 1 January 2026
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 39 (2) , 485-491
Open AccessLow-temperature Synthesis of Composite C-TiB2 Electrodes in Standard Firing Processes and in Molten Salt Electrolysis
In the article the results of laboratory investigations of two versions of low-temperature synthesis for compact composite carbon - titanium carbide/titanium diboride (C – TiC/TiB2) are presented. The article concerns the preliminary examination of the thermodynamic probability of titanium carbide and titanium boride synthesis during the process of standard baking at the temperature of 1050±10ºС in the volume of carbon electrode, which composition contains boron oxide and one of the refractory metals; the synthesis taking place directly during the electrolytic reduction of the melts at the temperature of 965-970°С in the volume of carbon cathode, containing metal oxides, is also examined. After preliminary standard preparation of mixing the initial components (petroleum coke, metallic titanium Ti, titanium oxide TiO2, boron oxide B2O3 and binder), cathode samples were formed, which were calcined under a layer of petroleum coke. Experiments with different holding times during the electrolytic process showed a continuous film of aluminum on the surface of the cathode, which indicates acceptable wettability. The presence of TiC/TiB2 was confirmed by X-ray phase analysis and X-ray structural analysis (SEM-EDS analysis). Innovative technologies presented for the production of composite electrode materials could be used for the synthesis of wide range of the composite products in С – МеС/МеВ2 system. The equivalent value of petroleum coke and oxides of refractory metals allows supposing the short payback period of the use composite cathode blocks in existing pots and in pots under design.
- Open Access
- 5 October 2024
- Published by Irkutsk National Research Technical University in iPolytech Journal
- Vol. 28 (3) , 513-537
Problems and solutions to protection of carbon-graphite electrodes
This paper presents literature review of the existing problems and solutions in protecting carbongraphite electrodes from the destructive environment of arc steel-making furnaces, magnesium and aluminum cells. The most significant publications on the corrosion resistance of cathodes and anodes in relation to physical, chemical, and electrochemical wear, to oxidizing environments, to active components of the introduction and destruction of the carbon structure are discussed. An analysis of various proposals and engineering solutions for reducing or eliminating the impact of aggressive environments on electrodes under specific operating conditions of metallurgical units is carried out. It was established that losses from lateral oxidation of the electrode surface of arc steel-making furnaces, when passing the temperature zone of 600–800°C, may reach 40–60% of the total consumption. Carbon-graphite products are subject to a significant destructive effect of the specific interaction of carbon with elements and compounds of the working environment, which can be introduced (intercalate) into the interlayer structure of carbon. The existing engineering and technological solutions mainly apply to the protection of the product surface; moreover, they perform their functions for a short time, rather than during the entire service life of the metallurgical unit. In this connection, it is proposed to focus on ensuring volumetric protection of electrodes from the effects of an aggressive environment. Intermediate results obtained in the field of synthesis of carbonbased composite materials adapted to the conditions of electrode production at existing enterprises are presented, along with the results of studies into the oxidizability of these composites. The existing and proposed engineering solutions for protecting the surface of carbon products have not received wide recognition or are not used in the metallurgical industry. Among the most probable reasons are the limited period of electrode surface protection, the complexity of reproduction, or the lack of profitability due to the high cost of protective components. In this regard, synthesis of C – TiC/TiB2 composite electrodes based on petroleum coke and graphite seems to be a promising research direction.
- 5 October 2024
- Published by Irkutsk National Research Technical University in iPolytech Journal
- Vol. 28 (3) , 513-537
Open AccessProblems and solutions to protection of carbon-graphite electrodes
This paper presents literature review of the existing problems and solutions in protecting carbongraphite electrodes from the destructive environment of arc steel-making furnaces, magnesium and aluminum cells. The most significant publications on the corrosion resistance of cathodes and anodes in relation to physical, chemical, and electrochemical wear, to oxidizing environments, to active components of the introduction and destruction of the carbon structure are discussed. An analysis of various proposals and engineering solutions for reducing or eliminating the impact of aggressive environments on electrodes under specific operating conditions of metallurgical units is carried out. It was established that losses from lateral oxidation of the electrode surface of arc steel-making furnaces, when passing the temperature zone of 600–800°C, may reach 40–60% of the total consumption. Carbon-graphite products are subject to a significant destructive effect of the specific interaction of carbon with elements and compounds of the working environment, which can be introduced (intercalate) into the interlayer structure of carbon. The existing engineering and technological solutions mainly apply to the protection of the product surface; moreover, they perform their functions for a short time, rather than during the entire service life of the metallurgical unit. In this connection, it is proposed to focus on ensuring volumetric protection of electrodes from the effects of an aggressive environment. Intermediate results obtained in the field of synthesis of carbonbased composite materials adapted to the conditions of electrode production at existing enterprises are presented, along with the results of studies into the oxidizability of these composites. The existing and proposed engineering solutions for protecting the surface of carbon products have not received wide recognition or are not used in the metallurgical industry. Among the most probable reasons are the limited period of electrode surface protection, the complexity of reproduction, or the lack of profitability due to the high cost of protective components. In this regard, synthesis of C – TiC/TiB2 composite electrodes based on petroleum coke and graphite seems to be a promising research direction.
- 1 October 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (10) , 102501
Synthesis of Carbon – TiC/TiB2 Composites at the Electrolytic Reduction of Fused Salts
This article presents the results of laboratory testing of the technology for the synthesis of composite carbon—titanium carbide/titanium diboride (C—TiC/TiB 2) material directly in course of electrolytic reduction of cryolite-alumina melts. After the preliminary standard treatment purposing the mixing of initial components—petroleum coke of different fractions, rutile titanium oxide TiO 2, boron oxide B 2 O 3 and binding agent—the cathode specimens were pressed to the specified sizes and thermally treated at the temperature of 1050 °С. Experiments with holding time of 5, 15 and 24 h during the electrolytic reduction process have demonstrated the acceptable wettability of cathode specimen surface. X-ray phase analysis and SEM-EDS-analysis have detected the presence of TiC/TiB 2 and titanium oxycarbide TiC x O 1-x within the volume of cathodes and on their surface. After 15 and 24 h experiments the aluminium layer with good adhesion to the surface was noticed on the cathode surface; which is indicative of wettability of the electrode with metal. This tested technology can be extended to the creation of wide range of composite products in the С—МеС/МеВ 2 system.
- 1 October 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (10) , 102501
Synthesis of Carbon – TiC/TiB2 Composites at the Electrolytic Reduction of Fused Salts
This article presents the results of laboratory testing of the technology for the synthesis of composite carbon—titanium carbide/titanium diboride (C—TiC/TiB 2) material directly in course of electrolytic reduction of cryolite-alumina melts. After the preliminary standard treatment purposing the mixing of initial components—petroleum coke of different fractions, rutile titanium oxide TiO 2, boron oxide B 2 O 3 and binding agent—the cathode specimens were pressed to the specified sizes and thermally treated at the temperature of 1050 °С. Experiments with holding time of 5, 15 and 24 h during the electrolytic reduction process have demonstrated the acceptable wettability of cathode specimen surface. X-ray phase analysis and SEM-EDS-analysis have detected the presence of TiC/TiB 2 and titanium oxycarbide TiC x O 1-x within the volume of cathodes and on their surface. After 15 and 24 h experiments the aluminium layer with good adhesion to the surface was noticed on the cathode surface; which is indicative of wettability of the electrode with metal. This tested technology can be extended to the creation of wide range of composite products in the С—МеС/МеВ 2 system.
- 1 May 2022
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 169 (5) , 053502
Analytical Modeling of Current and Potential Distribution over Carbon and Low-Consumable Anodes during Aluminum Reduction Process
Based on the theory of current and potential distribution for aqueous solution systems and existing analytical models, tertiary current and potential distributions over carbon and non-consumable anodes in cryolite-alumina melt are calculated. By varying different electrolysis parameters and anode surface geometry (rectangular smooth anode and section of anode sinusoidal profile), their functional relationship with current and potential distribution is established. The influence of resulting distribution pattern and the values of local current density and local anode potential on anode process stability together with related probable causes of the increased consumption of carbon and non-consumable anodes are discussed. The main factors influencing on current and potential distribution are anode overpotential and diffusion layer thickness, which represents the electrolyte properties related to electrolyte mixing conditions. Local current density on the edges of a rectangular anode is 2 times higher than in the central part. Current distribution over rough anode surface is uneven—local current density at peaks of surface defects is higher by 40% to 60%. When limiting current density is approached at these preferential spots, the values of standard potentials for perfluorocarbons evolution on carbon anodes and metal fluorides formation on inert anodes are reached. The theoretically established relationship between the anode surface structure and current and potential distribution could be the primary cause for increased anode consumption and passivation with subsequent destabilization of electrolysis in standard and low-melting electrolytes. The possible ways to equalize the current and potential distribution across the anode surface are presented.
- 1 May 2022
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 169 (5) , 053502
Analytical Modeling of Current and Potential Distribution over Carbon and Low-Consumable Anodes during Aluminum Reduction Process
Based on the theory of current and potential distribution for aqueous solution systems and existing analytical models, tertiary current and potential distributions over carbon and non-consumable anodes in cryolite-alumina melt are calculated. By varying different electrolysis parameters and anode surface geometry (rectangular smooth anode and section of anode sinusoidal profile), their functional relationship with current and potential distribution is established. The influence of resulting distribution pattern and the values of local current density and local anode potential on anode process stability together with related probable causes of the increased consumption of carbon and non-consumable anodes are discussed. The main factors influencing on current and potential distribution are anode overpotential and diffusion layer thickness, which represents the electrolyte properties related to electrolyte mixing conditions. Local current density on the edges of a rectangular anode is 2 times higher than in the central part. Current distribution over rough anode surface is uneven—local current density at peaks of surface defects is higher by 40% to 60%. When limiting current density is approached at these preferential spots, the values of standard potentials for perfluorocarbons evolution on carbon anodes and metal fluorides formation on inert anodes are reached. The theoretically established relationship between the anode surface structure and current and potential distribution could be the primary cause for increased anode consumption and passivation with subsequent destabilization of electrolysis in standard and low-melting electrolytes. The possible ways to equalize the current and potential distribution across the anode surface are presented.
- 30 October 2020
- Published by Ore and Metals Publishing House in Tsvetnye Metally
- p. 42-49
Electrolytic production of aluminium. Review. Part 2. Development prospects
This paper looks at the evolution and the current status of inert electrodes. It also describes attempts to design new-generation aluminium cells with wettable cathodes and vertical electrodes. Numerous laboratory studies and pilot tests demonstrate that aluminium cells equipped with inert electrodes are environmentally safe and can deliver a breakthrough technology enabling to bring the power consumption down below 10 kWt·h/kg Al and at the same time increase the production even in the limited capacity of the electrolytic bath. There exists a number of projects aimed at commercializing the inert electrode technology. And despite the apparent loss of interest in this technology on the part of researchers and aluminium producers, relevant pilot tests are scheduled for 2024. A number of alternative innovative power saving cryolite-alumina bath techniques are being discussed, which should allow to get close to the theoretical level of power consumption and provide a dramatic boost in the cell capacity. The paper examines potential application of thermoelectric generators to reduce heat losses, the use of minimum anode-to-cathode distance and vertical nonwettable electrodes, and a transition to 3D electrodeposition of aluminium with cathode polarization.
- 30 October 2020
- Published by Ore and Metals Publishing House in Tsvetnye Metally
- p. 42-49
Electrolytic production of aluminium. Review. Part 2. Development prospects
This paper looks at the evolution and the current status of inert electrodes. It also describes attempts to design new-generation aluminium cells with wettable cathodes and vertical electrodes. Numerous laboratory studies and pilot tests demonstrate that aluminium cells equipped with inert electrodes are environmentally safe and can deliver a breakthrough technology enabling to bring the power consumption down below 10 kWt·h/kg Al and at the same time increase the production even in the limited capacity of the electrolytic bath. There exists a number of projects aimed at commercializing the inert electrode technology. And despite the apparent loss of interest in this technology on the part of researchers and aluminium producers, relevant pilot tests are scheduled for 2024. A number of alternative innovative power saving cryolite-alumina bath techniques are being discussed, which should allow to get close to the theoretical level of power consumption and provide a dramatic boost in the cell capacity. The paper examines potential application of thermoelectric generators to reduce heat losses, the use of minimum anode-to-cathode distance and vertical nonwettable electrodes, and a transition to 3D electrodeposition of aluminium with cathode polarization.
- 28 February 2020
- Published by Ore and Metals Publishing House in Tsvetnye Metally
- p. 36-41
Electrolytic production of aluminium. Review. Part 1. Conventional areas of development
This paper provides a review of the main areas of development in the conventional production of primary aluminium, analyses the many years of attempted commissioning of new-generation aluminium cells equipped with inert electrodes and considers some innovative approaches to improving the Hall – Heroult process. This part of the review demonstrates that starting from 1990s and till the present day the development of aluminium cells has been related to an increasing unit power. Another trend that has been observed is a rising current efficiency and a decreasing power consumption, which is the result of consistent efforts to optimize the cell design and the process and is due to the application of innovative materials and automatic control systems. At the same time, there have been significant changes in terms of electrolyte composition and temperature and the superheat versus the melting point. Alumina and fluoride point feeders, dry gas purification systems and effective cell covers have been introduced. Busbar have been improved to mitigate the effect of magnetic fields and maintain the stability of liquid aluminium cathode. These improvements helped boost the cell performance with the current efficiency risen to 96% and the specific power consumption dropped to 12.0–12.5 kW·h/kg Al. Further decrease in the power consumed by conventional design cells would require the use of a wettable (drained) cathode and a special technology to help dissipate heat from the outside of the cathode shell.
- 28 February 2020
- Published by Ore and Metals Publishing House in Tsvetnye Metally
- p. 36-41
Electrolytic production of aluminium. Review. Part 1. Conventional areas of development
This paper provides a review of the main areas of development in the conventional production of primary aluminium, analyses the many years of attempted commissioning of new-generation aluminium cells equipped with inert electrodes and considers some innovative approaches to improving the Hall – Heroult process. This part of the review demonstrates that starting from 1990s and till the present day the development of aluminium cells has been related to an increasing unit power. Another trend that has been observed is a rising current efficiency and a decreasing power consumption, which is the result of consistent efforts to optimize the cell design and the process and is due to the application of innovative materials and automatic control systems. At the same time, there have been significant changes in terms of electrolyte composition and temperature and the superheat versus the melting point. Alumina and fluoride point feeders, dry gas purification systems and effective cell covers have been introduced. Busbar have been improved to mitigate the effect of magnetic fields and maintain the stability of liquid aluminium cathode. These improvements helped boost the cell performance with the current efficiency risen to 96% and the specific power consumption dropped to 12.0–12.5 kW·h/kg Al. Further decrease in the power consumed by conventional design cells would require the use of a wettable (drained) cathode and a special technology to help dissipate heat from the outside of the cathode shell.
- 25 December 2019
- Published by Ore and Metals Publishing House in Non-ferrous Metals
- No. 2,p. 38-42
The mechanism of titanium diboride low-temperature synthesis
To determine the mechanism and conditions for the increased of product yield of titanium diboride TiB2 lowtemperature synthesis, a thermodynamic assessment of the interaction in the TiО2 – B2О3 – C system was performed. A numerical method was used to study a series of consequentially-parallel processes for the reduction of titanium oxide to its non-stoichiometric oxycarbide phase and its subsequent interaction with gaseous boron oxides. The Gibbs energy was estimated for oxycarbide TiCxO1 – x and titanium borate TiBO3 at 1027 oC, which are related as G0TiCxO1 – x >> G0TiBO3. This energy ratio of intermediate products of the titanium diboride synthesis allowed to make essential corrections in providing conditions and final results of synthesis. At the first stage of the process, it was established that fluorine-doped titanium oxide TiO2 – xFx is reduced to oxycarbide TiCxO1 – x with a deficient carbon content of x < 0.5. At the final stage, exposure of isolated system at a fixed temperature requires moderate kinetic stimulation of TiB2 synthesis by periodic vacuuming. This is due to the need to create conditions for the disproportionation of gaseous boron oxide B2O3(gas) to its suboxides (B2O2(gas), BO2(gas)) in the volume of the reaction mixture TiО2 – B2О3 – C and to suppress the “parasitic” reaction of the titanium borate TiBO3 formation. The established mechanism assumes observance of balance between temperature and duration of phase transformations during the exposure of the system at the first stage, a balance between the increased PB2O2/PCO ratio in the gas phase and the temperature at the final stage of the titanium diboride synthesis. The mechanism and conditions for the TiB2 synthesis are confirmed by laboratory experiments, the implementation of which allows to obtain titanium diboride powders of technical purity at 1030–1050 oC.
- 25 December 2019
- Published by Ore and Metals Publishing House in Non-ferrous Metals
- No. 2,p. 38-42
The mechanism of titanium diboride low-temperature synthesis
To determine the mechanism and conditions for the increased of product yield of titanium diboride TiB2 lowtemperature synthesis, a thermodynamic assessment of the interaction in the TiО2 – B2О3 – C system was performed. A numerical method was used to study a series of consequentially-parallel processes for the reduction of titanium oxide to its non-stoichiometric oxycarbide phase and its subsequent interaction with gaseous boron oxides. The Gibbs energy was estimated for oxycarbide TiCxO1 – x and titanium borate TiBO3 at 1027 oC, which are related as G0TiCxO1 – x >> G0TiBO3. This energy ratio of intermediate products of the titanium diboride synthesis allowed to make essential corrections in providing conditions and final results of synthesis. At the first stage of the process, it was established that fluorine-doped titanium oxide TiO2 – xFx is reduced to oxycarbide TiCxO1 – x with a deficient carbon content of x < 0.5. At the final stage, exposure of isolated system at a fixed temperature requires moderate kinetic stimulation of TiB2 synthesis by periodic vacuuming. This is due to the need to create conditions for the disproportionation of gaseous boron oxide B2O3(gas) to its suboxides (B2O2(gas), BO2(gas)) in the volume of the reaction mixture TiО2 – B2О3 – C and to suppress the “parasitic” reaction of the titanium borate TiBO3 formation. The established mechanism assumes observance of balance between temperature and duration of phase transformations during the exposure of the system at the first stage, a balance between the increased PB2O2/PCO ratio in the gas phase and the temperature at the final stage of the titanium diboride synthesis. The mechanism and conditions for the TiB2 synthesis are confirmed by laboratory experiments, the implementation of which allows to obtain titanium diboride powders of technical purity at 1030–1050 oC.
- Open Access
- 1 February 2019
- Published by Irkutsk National Research Technical University in iPolytech Journal
- Vol. 23 (2) , 356-366
Features of solid electrode application for cryolite-alumina melt electrolysis
- 1 February 2019
- Published by Irkutsk National Research Technical University in iPolytech Journal
- Vol. 23 (2) , 356-366
Open AccessFeatures of solid electrode application for cryolite-alumina melt electrolysis
- 1 January 2019
- Published by Springer Nature in Metallurgist
- Vol. 62 (9-10) , 1048-1053
Role of Vanadium in Aluminum Electrolyzer Melts
- 1 January 2019
- Published by Springer Nature in Metallurgist
- Vol. 62 (9-10) , 1048-1053
Role of Vanadium in Aluminum Electrolyzer Melts