DBDuan Bin

Duan Bin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Duan Bin has a total of 149 co-authors. Here are the top co-authors by number of shared publications:

  • Beibei Yang

    Department of Polymer Materials and Science, College of Chemistry and Chemical Engineering, Nantong University, Nantong, 226019, China

    22 shared publications
  • Hongbin Lu

    Haian Institute of High-end Textile, Nantong University, Nantong, 226000, P R China

    16 shared publications
  • Yongyao Xia

    Department of Chemistry Fudan University Shanghai P. R. China

    12 shared publications
  • Xiao Liu

    School of Chemistry and Chemical Engineering, Nantong University, Nantong, Jiangsu, 226019, P.R. China

    10 shared publications
  • Yonggang Wang

    Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials iChEM (Collaborative Innovation Center of Chemistry for Energy Materials) Fudan University Shanghai China

    9 shared publications
  • Congcong Li

    School of Chemistry and Chemical Engineering Nantong University Nantong Jiangsu P. R. China

    8 shared publications

Latest Publications

  • Open Access

    Breaking the Thermal Limits: Solvation Chemistry of Hydrogel Electrolytes for Extreme‐Temperature Stable Zinc‐Ion Batteries

    by Yilong Liang, Xinyue Yang, Yongzheng Zhang, Jinyuan Zhao, Duan Bin, Hongbin Lu, Qinghan Zeng, Jitong Wang

    Aqueous zinc metal batteries (AZMBs) are promising candidates for safe and cost‐effective energy storage, yet their practical deployment across a wide temperature range is severely constrained by temperature‐dependent ion‐transport limitations and electrode–electrolyte interfacial instability. At low temperatures, sluggish Zn 2+ transport and desolvation promote concentration polarization and nonuniform Zn deposition, while elevated temperatures accelerate water‐induced parasitic reactions, corrosion, and interfacial degradation. Hydrogel electrolytes offer opportunities to address these challenges by regulating water activity, Zn 2+ solvation, ion transport, and interfacial mechanics within an integrated polymer network. This review systematically elucidates five representative design strategies: high‐entropy environments, water‐deficient hydrogels, deep eutectic solvent‐mediated regulation, zwitterionic networks, and nanofiller reinforcement, with particular emphasis on their effects on Zn 2+ coordination, water organization, transport kinetics, and interfacial stability. Quantitative solvation and kinetic descriptors, including coordination numbers, ion‐pair populations, diffusion coefficients, transference numbers, interaction energies, and activation energies, are compared to clarify how electrolyte structure influences performance at different temperatures. The advantages and limitations of the five strategies are further compared in relation to their applicable temperature‐dependent challenges. Finally, key priorities are discussed for temperature‐resolved solvation characterization, operando analysis, practical cell evaluation, and standardized thermal testing, providing guidance for the development of hydrogel electrolytes toward reliable wide‐temperature AZMBs.

  • Open Access

    A hydrogen-bonded conjugated quinone polymer enables ultrafast and ultrastable NH 4 + storage for aqueous ammonium-ion batteries

    by Xingru Chen, Rong Ge, Xueqing Ren, Wei Qin, Yu Ge, Junyue Luo, Guangzheng Xu, Jiamin Zhang, Beibei Yang, Yongzheng Zhang, et al.

    A hydrogen-bonded conjugated polymer (HMND) is designed as the anode to overcome dissolution and enable ultrafast NH 4 + storage in aqueous ammonium-ion batteries.

  • Open Access

    Regulation Strategies and Mechanistic Understanding of Zinc Deposition Interfaces in Anode‐Free Aqueous Zinc Metal Batteries

    by Wenbin Li, Wenxuan Hu, Min Zhang, Beibei Yang, Yongzheng Zhang, Hongbin Lu, Jianhang Huang, Duan Bin

    Anode‐free aqueous zinc metal batteries (AF‐AZMBs) eliminate Zn anodes and enable in situ Zn plating/stripping on inert current collectors to increase energy density with low cost and improved safety. Unlike conventional AZMBs, AF‐AZMBs lack a Zn reservoir, so that cathode‐derived Zn must be fully recovered through reversible plating, making zinc deposition chemistry fundamentally decisive for reversibility and failure evolution. Repeated deposition interface reconstruction induces heterogeneous nucleation, irreversible zinc loss, ion transport limitation, hydrogen evolution, and dead zinc formation, severely impairing plating‐stripping reversibility and practical application. Stable electrode‐electrolyte interface chemistry is pivotal for uniform zinc deposition, parasitic reaction suppression, and reversibility enhancement, making interfacial regulation targeting zinc deposition a research focus. This review summarizes recent advances in AF‐AZMBs, highlighting the core role of interfacial chemistry in optimizing zinc deposition dynamics and electrochemical performance. Three synergistic strategies, including electrolyte optimization, current collector modification, and separator interface engineering, are systematically analyzed in terms of their coordinated modulation of Zn 2 + transport behavior, nucleation thermodynamics, growth kinetics, and interfacial stability, thereby improving deposition uniformity and reversibility. By elucidating the interfacial mechanisms that govern zinc deposition stability in AF‐AZMBs, this review provides design principles for constructing high energy density, long lifespan systems via targeted interfacial chemistry.


  • Sustainable eutectic electrolytes for aluminum-ion batteries: design and recent advances

    by Wen Zhuang, Xingru Chen, Wei Qin, Beibei Yang, Yongzheng Zhang, Hongbin Lu, Duan Bin

    This work highlights the design principles, interfacial regulation mechanisms, and electrochemical advantages of eutectic electrolytes for enabling high-performance and stable aluminum-ion batteries.


  • A sodium polyphosphate-induced gel interfacial layer enables a stable Zn anode under harsh conditions

    by Yue Shen, Yongkang Wang, Xiao Liu, Xingru Chen, Jiyu Sun, Beibei Yang, Qiang Huang, Yongzheng Zhang, Hongbin Lu, Duan Bin

    A gel-modified glass fiber separator is designed by reacting sodium polyphosphate solution with ZnCl 2 solution, demonstrating an effective strategy focused on dendrite suppression and interfacial stability in aqueous metal zinc batteries.


  • Open Access

    Intercalation of organic compounds in layered copper-hydroxide for electrochemical sensor phytohormone in plants

    by Linyan Su, Chenxin Meng, Mengyong Tang, Yu Ge, Xiao Liu, Duan Bin, Hongbin Lu, Beibei Yang

    The high-performance electrochemical sensors for phytohormone analysis require integrate structural robustness with efficient charge transport and molecular recognition, motivating the development of copper-based intercalation material (Cu-SDA) selective electrochemical detection of salicylic acid (SA) and indole-3-acetic acid (IAA). The high structural stability of Cu-SDA is governed by π-π interactions between adjacent stacked aromatic linkers, while the copper hydroxide framework provides accessible redox-active sites that promote catalytic activity and electron transfer. Density functional theory (DFT) calculations reveal strong adsorption of SA and IAA on Cu-SDA, with adsorption energies of -1.0 and -1.2 eV, respectively, accompanied by shortened interaction distances. As a result, the Cu-SDA-based sensor exhibits low limits of detection (2.43 μM for SA and 1.15 μM for IAA), wide linear ranges, high selectivity, and anti-interference capability. Moreover, a practical sensing platform is constructed and successfully applied for in-situ detection of SA and IAA in peanut seedling leaves.

  • Polydopamine/Silica Coating Enhances Electrochemical and Thermal Properties of Polyethylene Separators for Lithium–Metal Batteries

    by Jinling Zhong, Yunfei Wang, Zeao Kang, Carlos M. Costa, Senentxu Lanceros-Mendez, Hongbin Lu, Duan Bin, Linjuan Zhang, Yao Liu, Jian-Qiang Wang

    Polyethylene (PE) is widely used as a separator material in rechargeable batteries. However, its poor thermal stability restricts proper high-temperature performance and poses safety risks. Additionally, the poor wettability between PE separators and liquid electrolytes limits the rate capability and cycle stability, particularly in high-energy-density lithium-metal batteries (LMBs). To address these challenges, this work reports on strategies involving silica (SiO2)/polydopamine (PDA) coatings on commercial PE separators, allowing enhancement of their electrochemical and thermal properties for LMBs. PDA was predeposited on PE and subsequently directed the in situ sol-gel growth of SiO2, ultimately resulting in a SiO2@PDA-coated PE hybrid separator (SiO2@PDA@PE). PDA furnishes an adhesive catecholamine interlayer for conformal SiO2 nucleation; SiO2 imparts thermomechanical stabilization and homogenizes the ionic flux. Remarkably, incorporation with SiO2@PDA (0.5 wt %, denoted SiO2@PDA@PE-0.5) significantly enhances the separator's ionic conductivity, Li+ transference number, and thermal stability. Consequently, LMBs constructed with a lithium metal anode, LiNi0.6Co0.2Mn0.2O2 (NCM622) cathode, and the SiO2@PDA@PE-0.5 separator demonstrate improved long-term cycle stability (1000 cycles at 72.6% retention rate), high-rate capability (58.1% of 8 C over to 1 C), and high-temperature performance (at 120 °C). This work presents an effective strategy, through separator design, to enhance the electrochemical performance and high-temperature operation of LMBs.


  • Intramolecular Hydrogen Bonds Enhanced Quinone‐Based Anode for High‐Performance Aqueous Proton Batteries

    by Xiao Liu, Jinlan Tang, Duan Bin, Congcong Li, Linyan Su, Wei Qin, Xingru Chen, Yu Ge, Rong Ge, Beibei Yang, et al.

    Aqueous proton batteries (APBs), utilizing redox‐active organic materials as the minimal hydrate proton charge carriers, have emerged as promising candidates for next‐generation energy‐storage. However, conventional quinone‐based electrode inclines to suffer from critical limitations, including electrode dissolution and sluggish reaction kinetics in strong acid electrolytes. To overcome this challenge, a quinone‐based polymer (HMND) material with intermolecular hydrogen bonds (HBs) was designed as an anode for APBs. This material forms HBs (C═O⋯N─H) between O in ─C═O and H in ─NH 2 that can not only significantly enhance the cycling stability of the organic electrode but also endow it with outstanding rate capability by accelerating proton transfer through the Grotthuss mechanism. The proton insertion/extraction mechanism has been verified through DFT, in situ/ex situ Raman spectra, and FT‐IR. Furthermore, the full APBs coupled with MnO 2 @GF cathode delivers a long lifespan of 42 000 cycles with a capacity decay rate of only 0.0018% per cycle at 8 A g −1 , along with an excellent rate performance (212.5 mAh g −1 at 1 A g −1 , 91.4 mAh g −1 at 70 Ag −1 ). It consistently showcases outstanding electrochemical performances even under extreme conditions in a frozen electrolyte at −60 °C, implying great potential for energy storage applications under extreme temperature scenarios.


  • MOF-derived Co-Fe heterojunction oxides on carbon nanofibers for alkaline simulated seawater electrolysis

    by Yu Ge, Zhangyu Luo, Xin Cao, Duan Bin, Peicheng Wang, Haocong Li, Zhangchi Sun, Hongbin Lu, BeiBei Yang


  • Open Access

    Membrane-free two-step water electrolysis enabled by a stable organic redox mediator

    by Xiao Liu, Jinglan Tang, Duan Bin, Qiang Huang, Congcong Li, Linyan Su, Wei Qin, Yu Ge, Xingru Chen, Hongbin Lu, et al.

    A quinone-based organic electrode (P-ACD) is designed to function as a solid-state redox mediator (SSRM), enabling membrane-free decoupled acidic water electrolysis by effectively separating hydrogen and oxygen production.