SZShengchang Zhang

Shengchang Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shengchang Zhang has a total of 62 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Decoupling of factors influencing interface characteristics in basalt fiber-reinforced polymer composites

    by Yingying Zhao, Shengchang Zhang, Qibin Xu, Krishnan Jayaraman, Mengjin Jiang, Pengqing Liu

  • Open Access

    Grafting-Induced Structural Reconstruction Enables Strong and Programmable Hydration-Triggered Debonding in Photocurable Poly(vinyl alcohol) Adhesives

    by Yuying Liu, Feiyang Teng, Yuanyuan Yu, Yingying Zhao, Lingcheng Meng, Zhoutai Shang, Junhua Zhang, Shengchang Zhang, Pengqing Liu, Mengjin Jiang

    The long-standing trade-off between robust adhesion and on-demand debonding remains a major challenge in the development of temporary bonding materials, as conventional strategies often sacrifice bulk strength to achieve removability. Herein, a bioinspired molecular design strategy is developed to decouple bulk cohesion from hydration-triggered interfacial debonding in a poly(vinyl alcohol) (PVA)-based adhesive. Grafting photoreactive 2-isocyanatoethylacrylate (AOI) reconstructs PVA’s intrinsic semicrystalline organization into an amorphous, adaptable architecture, facilitating intimate interfacial contact and efficient photo-crosslinking. The resulting three-dimensional covalent network provides robust bulk cohesion, while promoting ordered interfacial molecular interactions with glass substrates. Consequently, the adhesive achieves a lap shear strength of 7.6 ± 0.5 MPa on glass and strong adhesion toward diverse substrates. Upon exposure to 50 °C water, competitive hydration selectively weakens polymer–glass interfacial interactions, enabling residue-free debonding while preserving the integrity of the crosslinked network. This work establishes a bioinspired molecular engineering paradigm that overcomes the cohesion–debonding trade-off by integrating polymer network topology with adaptive interfacial interactions, providing new opportunities for temporary bonding technologies in advanced manufacturing.

  • Open Access

    Structural and morphological evolutions of the polyether ether ketone hollow-fiber nanofiltration membrane decorated by zeolitic imidazolate framework-8 based on the polydopamine-assisted hydrothermal crystal-growth process

    by Xinhao Xie, Shiyi Zhou, Shangbo Li, Pengqing Liu, Shengchang Zhang

    Despite their self-supporting architecture and outstanding dimensional stability, polyether ether ketone hollow-fiber membranes (PHFMs) remain constrained in high-flux precision separations by intrinsic mesoporosity, heterogeneous pore-size distribution, and fouling, all originating from the thermally induced phase separation process. To address these issues, a polydopamine (PDA)-assisted hydrothermal strategy was carried out to post-decorate nano zeolitic imidazolate framework-8 (ZIF‐8) onto the PHFM outer surface, aiming to further reduce pore size, uniformize pore-size distribution, and enhance antifouling properties. The effects of PDA concentration, precursor feeding ratio, hydrothermal time, and temperature on ZIF‐8 crystallization-growth process were systematically investigated. Under optimized conditions, a dense, continuous, and defect‐free ZIF‐8 crystalline layer was successfully formed on the outer wall. This tailored modification offers a promising pathway to overcome the permeability-selectivity trade‐off, thereby expanding the application potential of PHFMs in gas separation, isotope enrichment, and ionic sieving.

  • Open Access

    Manipulating the sizing behavior of polyamide-imide on carbon fibers by electrostatic interactions and enhancing the interfacial adhesion and mechanical properties of CFs/poly ether ether ketone composite laminates

    by Hongxi Chen, Tingyu Long, Yingying Zhao, Yong Chen, Shengchang Zhang, Pengqing Liu

    Despite the widespread use of heat-resistant sizing agents in carbon fiber (CF)/polyether ether ketone (PEEK) composites, issues such as filament sticking, non-uniform infiltration, and incomplete impregnation persist, hindering continuous compounding of large-tow CFs with high-viscosity melt. Herein, by incorporating various potential regulators during polyamide-imide (PAI) sizing, the uptake and spatial distribution of PAI are effectively tailored via modulating electrostatic interactions among CFs, PAI, and PRs. Specifically, electrostatic attraction between cationic cetyltrimethylammonium bromide (CTAB) and anionic PAI reduces the PAI adsorption rate onto the positively charged CF, enabling smooth adsorption kinetics that yields a thin, uniform coating with optimal uptake, suppressing aggregation and sticking. Consequently, the CTAB-regulated CF/PEEK composite exhibits an interfacial shear strength of 89.4 MPa (132% increase), with tensile and flexural strengths of 1005.4 MPa and 1425.3 MPa, respectively. In contrast, the co-adsorption of anionic sodium dodecyl sulfate and PAI onto CF surface triggers intense adsorption kinetics, destabilizing the PAI sizing. This led to excessive local enrichment, uneven coating, and filament sticking, which hindered impregnation of the CFs by the PEEK melt and ultimately compromised interfacial and mechanical properties of the composite. And the nonionic octoxinol exertes a physical barrier effect that moderately limited PAI adsorption, thereby facilitating a more controlled sizing process and promoting effective impregnation as well as interfacial adhesion during the formation of composite. This work offers a new perspective for achieving complete impregnation and uniform coating of heat-resistant sizing agents on CFs without compromising fiber spreadability, paving the way toward high-performance and scalable CF/PEEK composites.

  • Design of double-layered microcapsule shell by electrospraying route for functional coating of fibers and textile

    by Shengchang Zhang

    Conception d'une coque de microcapsule à double couche par voie d'électropulvérisation pour le revêtement fonctionnel des fibres et du textile: Les matériaux à changement de phase (MCP) peuvent stocker ou libérer spontanément une grande quantité de chaleur latente pendant leurs transitions de phase induite par les variations de température environnantes. Ils sont considérés comme les principaux candidats pour le stockage de l’énergie thermique et pour satisfaire la demande croissante en termes de gestion thermique, et ils sont également utilisés dans le textile pour améliorer le confort thermique. Ces dernières années, l'électro-pulvérisation a été largement utilisée pour fabriquer des microparticules et des microcapsules. En outre, lorsque les textiles sont placés sur le collecteur, le revêtement fonctionnel des textiles par les microcapsules électrosprayées est également réalisé lors du processus d'électro-pulvérisation. Ce travail vise à concevoir une méthode d'électro-pulvérisation appropriée pour piéger les MPC dans des microcapsules à double couche d'enveloppe. Le poly(acide lactique) et le polycaprolactone ont été sélectionnés comme enveloppes interne et externe fusible pour une fonctionnalisation de surface des textiles au cours d'un post-traitement par montée de température.Des microparticules de poly(caprolactone) (PCL) ont été produites par électro-pulvérisation en utilisant de cinq solvants (acétate d'éthyle, acétone, anisole, acide acétique glacial et chloroforme) à différentes concentrations de PCL, et en ajustant les paramètres de fonctionnement. Les effets des propriétés de la solution (tension de surface, conductivité électrique, viscosité et pression de vapeur) et des paramètres de fonctionnement (débit, distance de travail et tension appliquée) sur la formation des particules électro-pulvérisées ont été clarifiés.Deux n-alcanes (n-hexadécane et n-eicosane) à trois teneurs de charge (30 %, 50 % et 70 % en poids) ont été encapsulés avec succès dans une matrice de polycaprolactone par électrosprayage à buse unique, avec l'acétate d'éthyle (EA) et le chloroforme (Chl) comme solvants. Les effets de l'état de phase des n-alcanes, des ajouts de n-alcanes et de la sélection des solvants sur le processus d'électro-microencapsulation ainsi que la structure, la morphologie et les propriétés des mMCP obtenues ont été analysés. Afin d'améliorer l'efficacité de l'encapsulation, un système coaxial a également été utilisé. Une comparaison complète entre l'électro-pulvérisation à buse unique et coaxiale dans l'encapsulation des MCP, en se concentrant sur les structures, les morphologies et les propriétés thermiques des microcapsules correspondantes, a été réalisée. En raison de certaines limitations liées à la PCL, l'acide polylactique a été choisi comme autre matrice d'enveloppe pour réaliser la microencapsulation des PCM. Les effets de la concentration de PLA et de la teneur en charge de n-hexadécane sur les structures et les propriétés des mMCP résultantes ont été analysés. Enfin, à partir de ces travaux, les microcapsules à double membrane ont été fabriquées par électro-pulvérisation à buse coaxiale. Entre-temps, afin d'optimiser la structure, la morphologie et les propriétés thermiques des microcapsules finales de n-hexadécane / PLA/PCL et de mieux réaliser le revêtement fonctionnel des textiles, les effets des différentes additions de n-hexadécane, des différents rapports de poids entre le PCL et le PLA sur les structures, les morphologies et les propriétés des mMCP obtenues ont été étudiés en détail. Les microcapsules électro-pulvérisées avec une enveloppe à double couche offriront non seulement un grand potentiel et des avantages pour la fabrication de textiles à régulation thermique, mais aussi une nouvelle orientation pour les domaines du stockage de l'énergie et de la gestion thermique.

  • Multiscale Structural Regulation and Environmental Adaptability of Polyamide-Imide Fibers

    by Zhao Xu, Tingyu Long, Shuheng Liang, Yingying Zhao, Qibin Xu, Kaixiang Wang, Leyuan Shi, Shengchang Zhang, Mengjin Jiang, Pengqing Liu

  • Biomimetic Network and Microstructure for Multifunctional Recyclable Ramie Fiber-Reinforced Composites: High-Hydrophobic, Wave-Transparent, and Heat-Conducting

    by Qibin Xu, Shiyao Hua, Shengchang Zhang, Yingying Zhao, Lingcheng Meng, Tingyu Long, Mengjin Jiang, Pengqing Liu

    Ramie fiber yarn (PRF), characterized by its superior microwave transmittance (MWT), is a novel material that can effectively substitute traditional glass fiber (D-GF) in the fabrication of composites for communication equipment shells. However, the super hydrophilicity and inadequate thermal conductivity (λ) of PRF hinder its overall performance and safety in use. To date, no effective strategy has been developed to prepare multifunctional PRF-reinforced composites, including high hydrophobicity, MWT, and λ. Herein, by integrating the template method with vacuum-assisted spraying technology, a mosquito-eye-like honeycomb network was constructed on the surface of PRF fabric. This network, composed of nacre-like brick-and-mortar microstructures as its fundamental units, achieves both mesoscopic and microscopic order. The biomimetic network and microstructure enable the PRF fabric to transition from superhydrophilic to high-hydrophobic, significantly reducing water absorption in PRF-reinforced composites to levels similar to D-GF-reinforced composites. Furthermore, the biomimetic structures are incorporated into the composite interface via the fabric surface, resulting in MWT and λ values of up to 98% and 1.0582 W/mK, respectively. Importantly, PRF-reinforced composite waste can be fully transformed to multifunctional particles, thereby enabling closed-loop recycling and reuse. This biomimetic network and microstructure offer an efficient and versatile surface modification strategy for multifunctional composites.


  • Open Access

    Effects of the Hot-Drawing Process on the Pore Parameters, Gas Absorption and Mechanical Performances of Activated Carbon-Loaded Porous Poly(m-Phenylene Isophthalamide) Composite Fibres

    by Xiaosong Li, Bo Li, Qibin Xu, Lingcheng Meng, Deyang Wu, Pengqing Liu, Fabien Salaün, Shengchang Zhang

    Poor breathability, inadequate flexibility, bulky wearability, and insufficient gas-adsorption capacity always limit the developments and applications of conventional chemical protective clothing (CPC). To create a lightweight, breathable, and flexible fabric with a high gas-absorption capacity, activated carbon (AC)-loaded poly(m-phenylene isophthalamide) (PMIA) porous composite fibres were fabricated from a mixed wet-spinning process integrated with a solvent-free phase separation process. By manipulating the pore parameters of as-spun composite fibres, the exposure-immobilization of AC particles on the fibre surface can offer a higher gas-absorption capacity and better AC-loading stability. To improve the mechanical properties of AC-loaded porous as-spun fibres and further optimize the pore-locking structures, the impact of the hot-drawing process on the evolution of pore parameters and the corresponding properties (including the gas absorption capacity, the mechanical performance, and the stability of AC particles during loading) was clarified. After the hot-drawing process, the inhomogeneous pore morphologies composed of mesopores/micropores from as-spun fibres changed into homogeneous and decreased mesopores. With the decrease in structural defects in homogeneous morphologies, the tensile strength of AC-loaded PMIA porous-drawn fibres increased to 1.5 cN/dtex. Meanwhile, the greater total pore volume and specific surface area after hot drawing also maintained the gas-absorption capacity of drawn composite fibres at 98.53 mg/g. Furthermore, the AC-loaded PMIA porous composite fibres also showed comparable performance to the commercial FFF02 absorption layer in terms of static absorption behaviour for different gas molecules and absorption–desorption multi-cycling evaluations. In addition, due to the size reduction in mesopores after the hot-drawing process, the loading stability of AC particles in the stretched composite fibres was more substantial.