ARAli Rasoulzadeh

Ali Rasoulzadeh

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ali Rasoulzadeh has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Integrated Soil Carbon, Water Dynamics and Microbial Responses to Long‐Term Residue Management Under Continuous Barley Cultivation

    by Ali Rasoulzadeh, Ali Reza Sepaskhah, Akbar Ghavidel, Ali Asghari, Sama Jabbarivanjani, Jesús Fernández‐Gálvez

    Managing crop residues plays a key role in sustaining soil performance in semi‐arid farming systems, where losses of organic carbon and limited soil moisture can restrict agricultural productivity. This long‐term 5‐year field experiment evaluated the effects of three barley residue management strategies—residue removal, residue incorporation and residue burning—on soil carbon accumulation, hydrophysical behaviour and microbial activity. Annual measurements included soil organic carbon (SOC), carbon stock, bulk density, water retention and microbial populations. Residue incorporation consistently improved soil quality by enhancing carbon inputs and promoting aggregation, which collectively reduced bulk density, increased field capacity and stimulated microbial activity. SOC and carbon stock increased markedly under residue incorporation, reflecting sustained carbon additions and greater stabilization in the soil matrix. Burning residues resulted in moderate increases in SOC, partly due to the formation of charred material, but limited improvements in soil physical conditions and reduced microbial abundance indicated that the quality of carbon inputs remained poor. Residue removal led to the weakest improvements across all indicators. Overall, the findings demonstrate that residue incorporation provides the most effective pathway to improve soil carbon sequestration, water retention and microbial function in semi‐arid barley‐based systems.

  • Open Access

    Estimating the Soil Water Retention Inflection Point Using Pedotransfer Functions

    by Samaneh Abadani, Ali Rasoulzadeh, Javad Ramezani Moghadam, Javanshir Azizi Mobaser, Jesús Fernández-Gálvez

    The inflection point of the soil water retention curve (SWRC) is increasingly recognized as a key indicator of soil physical quality, as it reflects critical changes in pore structure and water availability. This study aims to develop and validate pedotransfer functions (PTFs) to estimate the water content ( θ i ), matric suction head ( h i ), and slope ( S i ) at the SWRC inflexion point from basic soil physical properties. A dataset comprising 219 soil samples, including laboratory-measured and UNSODA database entries, was used. The inflection point parameters were computed analytically from van enuchten model fits. Linear, nonlinear, and polynomial regression techniques were applied to derive PTFs using soil organic matter, bulk density, geometric mean particle diameter, and geometric standard deviation as input variables. Model performance was evaluated using root mean square error (RMSE), normalized root mean square error (NRMSE), correlation coefficient ( r ), and Taylor diagrams. A dataset comprising 219 soil samples, including laboratory-measured and UNSODA database entries, was used. The inflection point parameters were computed analytically from van Genuchten model fits. Linear, nonlinear, and polynomial regression techniques were applied to derive PTFs using soil organic matter, bulk density, geometric mean particle diameter, and geometric standard deviation as input variables. Model performance was evaluated using root mean square error (RMSE), normalized root mean square error (NRMSE), correlation coefficient ( r ), and Taylor diagrams. Six PTFs were developed for θ i (best model: r = 0.90; NRMSE = 8.6%), six for S i (best model: r = 0.71; NRMSE = 14.8%), and three for h i (best model: r = 0.46; NRMSE = 39.4%). θ i and S i were estimated with good to excellent accuracy, while h i proved more difficult to predict due to its dependence on microstructural properties not captured by standard soil descriptors. The developed PTFs for θi and Si are reliable and practical tools for assessing soil hydraulic behavior and physical quality. In contrast, accurate estimation of hi remains challenging, suggesting the need for additional structural or imaging-based predictors in future models.

  • Open Access

    Improving Soil Water Simulation in Semi-Arid Agriculture: A Comparative Evaluation of Water Retention Curves and Inverse Modeling Using HYDRUS-1D

    by Ali Rasoulzadeh, Mohammad Reza Kohan, Arash Amirzadeh, Mahsa Heydari, Javanshir Azizi Mobaser, Majid Raoof, Javad Ramezani Moghadam, Jesús Fernández-Gálvez

    Water scarcity in semi-arid regions necessitates accurate soil water modeling to optimize irrigation management. This study compares three HYDRUS-1D parameterization approaches—based on the drying-branch soil water retention curve (SWRC), wetting-branch SWRC (using Shani’s drip method), and inverse modeling—to simulating soil water content at 15 cm and 45 cm depths under center-pivot irrigation in a semi-arid region. Field experiments in three maize fields provided daily soil water, soil hydraulic, and meteorological data. Inverse modeling achieved the highest accuracy (NRMSE: 2.29–7.40%; RMSE: 0.006–0.023 cm3 cm−3), particularly at 15 cm depth, by calibrating van Genuchten parameters against observed water content. The wetting-branch approach outperformed the drying branch at the same depth, capturing irrigation-induced wetting processes more effectively. Statistical validation confirmed the robustness of inverse modeling in reproducing temporal patterns, while wetting-branch data improved deep-layer accuracy. The results demonstrate that inverse modeling is a reliable approach for soil water simulation and irrigation management, whereas the wetting-branch parameterization offers a practical, field-adaptable alternative. This study provides one of the first side-by-side evaluations of these three modeling approaches under real-world semi-arid conditions.


  • Open Access

    Half-Century Review and Advances in Closed-Form Functions for Estimating Soil Water Retention Curves

    by Ali Rasoulzadeh, Javad Bezaatpour, Javanshir Azizi Mobaser, Jesús Fernández-Gálvez

    This review provides a comprehensive overview of the closed-form expressions developed for estimating the soil water retention curve (SWRC) from 1964 to the present. Since the concept of the SWRC was introduced in 1907, numerous closed-form functions have been proposed to describe the relationship between soil matric suction and volumetric water content, each with distinct strengths and limitations. Given the variability in SWRC shapes influenced by soil texture, structure, and organic matter, models in the form of sigmoidal, multi-exponential, lognormal, hyperbolic, and hybrid functions have been designed to fit experimental SWRC data. Based on the number of adjustable parameters, these models are categorized into three main groups: three-, four-, and five-parameter models. They can also be classified as one-, two-, or three-segment functions depending on their structural complexity. A review of the developed models indicates that most are effective in representing the SWRC between the residual and saturated water content range. To capture the full range of the SWRC, hybrid functions have been proposed by combining traditional models. This review presents and discusses these models in chronological order of publication.


  • Open Access

    Integrating Geographic Information Systems and Multi-Criteria Decision Analysis for Evaluating Artificial Groundwater Recharge

    by Zahra Eghbali Lord, Ali Rasoulzadeh, Armin Abedi, Sharare Alikhani, Jesús Fernández-Gálvez

    The excessive exploitation of groundwater has led to a significant decline in water levels in recent years, emphasizing the need for sustainable water resource management strategies. Artificial groundwater recharge has emerged as an effective solution to address this challenge. This study integrates Geographic Information System (GIS) and Multi-Criteria Decision Analysis (MCDA) techniques to identify suitable areas for artificial groundwater recharge in the Ardabil plain, located in northwest Iran. Key parameters, including geology, slope, unsaturated zone thickness, soil texture, specific yield, drainage density, and land use, were analyzed. These parameters were weighted using three methodologies: Analytic Network Process (ANP), Analytic Hierarchy Process (AHP), and Fuzzy Analytic Hierarchy Process (FAHP). The final suitability map was developed by overlaying and combining the weighted information layers. The analysis revealed that 53.3%, 6%, and 42% of the plain area were classified as “very good” for artificial recharge according to the AHP, FAHP, and ANP methods, respectively. The southern part of the plain was consistently identified as a suitable area across all methods, characterized by pasture lands with young alluvial sediments, a deep unsaturated zone, gentle slopes, low drainage density, and high specific yield. To evaluate the performance of these methods, the results were cross-validated against natural recharge estimates, considering factors influencing water level fluctuations and recharge rates. Among the methods, ANP demonstrated the highest consistency with natural recharge estimates, making it the preferred approach.


  • Open Access

    Improved understanding of soil water content at field capacity and estimates from pedotransfer functions

    by Samira Jaefarzade Andabili, Ali Rasoulzadeh, Javad Ramezani Moghadam, Joseph Alexander Paul Pollacco, Jesús Fernández‐Gálvez

    The soil water content at field capacity, θFC, is a fundamental variable for irrigation and agriculture. This study determines the optimal tension (−33 or −10 kPa) of deriving θFC which best matches the in situ field measurements following the Veihmeyer procedure. The Veihmeyer method refers to a profile water status for which there is a negligible drainage rate of bare soil without evaporation. In addition, we derive a set of linear and nonlinear pedotransfer functions (PTFs) which estimate θFC. θFC was measured in 69 plots in north‐western Iran, which has a cold semi‐arid climate. The soil properties used for developing PTFs include texture, bulk density, and organic matter. The results show that θFC cannot be derived at a fixed tension. We therefore developed PTFs with satisfactory performance in reproducing in situ measured θFC. The findings show that PTFs developed at a fixed tension consistently underestimate θFC derived in situ. It was also speculated that tension less than −10 kPa could yield improved predictions of in situ θFC.


  • Open Access

    Performance of a Set of Soil Water Retention Models for Fitting Soil Water Retention Data Covering All Textural Classes

    by Ali Rasoulzadeh, Javad Bezaatpour, Javanshir Azizi Mobaser, Jesús Fernández-Gálvez

    A clean environment is an essential component of sustainable development, which is based on a comprehensive understanding of the behavior of water, soil, and air. The soil water retention (SWR) curve is a crucial function that describes how soil retains water, playing a fundamental role in irrigation and drainage, soil conservation, as well as water and contaminant transport in the vadose zone. This study evaluates the accuracy, performance, and prediction capabilities of 15 SWR models. A total of 140 soil samples were collected from different sites, covering all textural classes. Standard suction tests, using both hanging column and ceramic pressure plate extractors, were conducted to compile the SWR databank. 15 SWR models were selected and fitted to the SWR data points. Soil texture, bulk density, and organic matter were used to determine their effect on the performance of the SWR models. The results indicate that the Tani and Russo models exhibit the lowest levels of accuracy and performance among the selected models. Based on the Akaike and Bayesian information criteria analysis, the van Genuchten model exhibits the lowest values among the selected models, with poor prediction capabilities in estimating the SWR curve. The significance test at the 0.05 level (95% confidence interval) shows that according to the calculated p-values for the Pearson correlation coefficient between RMSE and texture, the Brooks-Corey and van Genuchten models are poorly influenced by soil properties. The performance of the models is not significantly affected by the soil organic matter. Similarly, bulk density does not significantly affect model performance except for the Brooks–Corey, van Genuchten, Tani, and Russo models. Among the SWR models considered, the double exponential, Groenevelt and Grant, and Khlosi et al. models demonstrate superior accuracy and performance in predicting the SWR curve. This is supported by lower values for RMSE, Akaike, and Bayesian information criteria.


  • Open Access

    Quantifying Landscape Pattern–Hydrological Process Linkage in Northwest Iran

    by Ali Rasoulzadeh, Raoof Mostafazadeh, Javanshir Azizi Mobaser, Nazila Alaei, Zeinab Hazbavi, Ozgur Kisi

    The enormous heterogeneity and complexity of landscape patterns and their linkage with the hydrological responses have rarely been quantified and cataloged, especially in ungauged regions. This research therefore linked the landscape characteristics to hydrological processes using a newly developed runoff landscape index (RLI) at the watershed scale in Ardabil Province, northwest Iran. First, 11 common landscape metrics were calculated using Fragstats 4.2.1 software. Then, a runoff landscape index (RLI) was developed based on land cover (λC), soil (λK), and topography (λS) factors in 28 watersheds. Correlation and regression analyses were also conducted to determine the relationship between RLI, commonly used landscape metrics, and mean base flow. The spatial variations of all meaningful landscape metrics and RLI were considerable throughout the study watersheds. The mean values of λC, λK, and λS were found to be 2.78 ± 1.08, 0.50 ± 0.10, and 1.22 ± 0.30, respectively. The mean RLI varied from 0.00009 in the Lay Watershed with an area of 19.09 km2 to 0.28 in the Boran Watershed with 10,268.95 km2. The correlation coefficient (r > 0.42; p-value < 0.05) was obtained significantly between RLI and only five landscape metrics, including the largest patch index (LPI), landscape shape index (LSI), landscape division index (DIVISION), splitting index (SPLIT), and Shannon’s diversity index (SHDI). In addition, a regression model with R2 of 0.97 and 0.67, respectively, in calibration and validation steps was established between river base flow as the dependent variable and main waterway length, LPI, LSI, SPLIT, modified Simpson’s diversity index (MSIDI), and λS as independent variables. The result confirms the significant interdependence of RLI and landscape characteristics, which can be used to interpret the landscape’s dynamic and its effects on hydrological processes.


  • Open Access

    Hot Spots Analysis of Landscape Metrics and Runoff Landscape Index in Ardabil Province

    by A. Rasoulzadeh, Z. Hazbavi, J. Azizi Mobaser, R. Mostafazadeh, N. Alaei

    Hot spots are often associated with places where an abnormal process has occurred. Accordingly, their identification can help experts and managers to scrutinize the state of health and sustainability, from an ecological point of view. The present study was therefore conducted to analyze the spatial autocorrelation and identify hot spots ...


  • Genetic interaction and inheritance of biochemical traits can predict tolerance of hybrid maize cv. SC704 to drought

    by Mozhgan Shirinpour, Ali Asghari, Saeid Aharizad, Ali Rasoulzadeh, Saeed Khavari Khorasani