JTJohn S. Tyner

John S. Tyner

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


John S. Tyner has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Effect of Pervious Concrete on Water Quality Parameters: A Case Study

    by Brent S. Pilon, John S. Tyner, Daniel C. Yoder, John R. Buchanan

    Stormwater is a leading source of pollutants that when transported to surface waters may damage aquatic habitat, decrease reservoir capacity, and contaminate drinking water. In order to evaluate whether a pervious concrete detention system can remove stormwater pollutants from the runoff, water quality was monitored at a site with both impervious asphalt and pervious concrete parking areas. The stormwater flowed across asphalt pavement before infiltrating into the pervious concrete and an aggregate sub-base below. The runoff was sampled exiting the asphalt but prior to entering the pervious concrete, and after it passed through the pervious concrete detention system, representing pre- and post-treatment sampling. Results showed statistically significant (p < 0.05) decreases in concentrations of total suspended solids, nitrite, chemical oxygen demand, and polycyclic aromatic hydrocarbons compared to untreated asphalt runoff. Zinc concentrations were apparently reduced, but not quite to statistically significant levels (p = 0.054). Values of pH and sulfate both showed statistically significant (p < 0.05) increases.


  • Open Access

    Estimating the Infiltration Area for Concentrated Stormwater Spreading over Grassed and Other Slopes

    by John S. Tyner, Daniel C. Yoder, Jacob Parker, William C. Credille

    This research developed a new approach for calculating the area over which water spreads after being released from a confined conduit onto a sloped planar surface with defined roughness. In particular, the goal was to predict how stormwater would spread onto a sloped grass lawn after being discharged from a disconnected gutter downspout or through a parking lot curb cut. The need for this stems primarily from regulators increasingly requiring developers to infiltrate more of the runoff created by site development, but designers not having good tools for estimating the infiltration area associated with such “overflow” practices. The model is largely based on Manning’s equation applied at multiple cross-sectional areas of flow downslope, with additional modifications allowing the water to spread laterally. The model results were compared to laboratory experiments of water spreading across a roughened painted surface and two different artificial turfs. The new model predicted the wetting area with average absolute errors of 6.0% and 5.9% for a fine-bladed artificial turf and a coarse-bladed artificial turf, respectively. In addition, while validating the modeled flow spreading across a range of roughnesses, the model had an absolute error of 5.2% for a rough painted surface meant to represent unfinished concrete.


  • Spatial variation of selenium in Appalachian coal seams

    by L. Le, J. S. Tyner, E. Perfect, D. C. Yoder

  • Advanced Stormwater Skimmer with No Moving Parts

    by Brent S. Pilon, John S. Tyner, Daniel C. Yoder

    Sediment-laden runoff is the primary pollutant in many watersheds, so sediment basins are commonly used to remove sediment before it leaves the site. In fact, for construction sites such basins are often required by statute. Sediment basins are usually drained by perforated vertical risers and more recently by floating skimmers. Whereas a traditional riser discharges primarily from its lower orifices because of the higher heads that exist at greater depths, skimmers drain the cleaner water at the top of the water column, thereby increasing sediment retention. The authors have developed an alternative solid state skimmer (given the moniker “solid state” because it has no moving parts) that provides a similar skimming function, but also provides the additional benefits of varying flow rate with head and serving as its own principal spillway. The solid state skimmer is comprised of two concentric vertical risers. Columns of orifices cut into each riser act in series such that the flow into the outer ...


  • 2‐D radial analytical solutions for solute transport in a dual‐porosity medium

    by Abdullah Cihan, John S. Tyner

    This study presents 2‐D analytical solutions for advective solute transport within a macropore with simultaneous radial diffusion into an unbounded soil matrix. Solutions for three conditions are derived: (1) an instantaneous release of solute into a macropore, (2) a constant concentration of solute at the top of a macropore, and (3) a pulse release of solute into a macropore. A system of two governing equations was solved by the Laplace transform method for solute concentration as a function of space and time. Substituting the asymptotic approximations of the modified Bessel functions, we also obtained approximate solutions for all three cases. For instantaneous and pulse‐type releases of solutes, the solutes initially diffuse into the soil matrix and then reverse direction away from the matrix as they diminish in the macropore. The matrix behaves as a long‐term contaminant source creating long tails in the breakthrough curves. Comparisons between the exact and approximate solutions for all three conditions show that the asymptotic approximations are accurate for relatively short periods of solute movement, with increasing error as time and transport distances increase. The analytical solutions were compared with one set of experimental data and also numerical simulations for contaminant transport in a cylindrical dual‐porosity medium. The analytical solutions for case 3 represented the experimental data reported in the literature well. Comparisons with numerical simulations in a two‐dimensional cylindrical domain that included dispersion in the macropore and advection in the matrix showed that the error caused by neglecting these two processes was minimal when a relatively low permeability matrix was considered for case 2.


  • The Dual Gravimetric Hot‐Air Method for Measuring Soil Water Diffusivity

    by J. S. Tyner, L. M. Arya, W. C. Wright

    The hot‐air method provides rapid measurement of a soil's unsaturated hydraulic diffusivity function. The original method consists of blowing hot air across one end of a soil column for a short period, and then quickly extruding, dissecting, and oven drying the soil to provide the soil water content profile, which is used to calculate the soil's unsaturated hydraulic diffusivity. This research presents a novel approach to measuring the soil water content profile during a hot‐air test. During the drying process, a soil column is suspended in a horizontal position by a load cell attached at each end. The measured change in force from the two load cells enables calculation of the soil water content profile, without soil extrusion, dissection, and oven drying. Because the test is nondestructive, it permits estimation of the water content profile and calculation of the unsaturated hydraulic diffusivity function at multiple times. Similarity of the diffusivity functions at various times during the drying process provides evidence of proper testing conditions, a utility not available with the destructive approach. We applied the method to a silt loam and a clay loam and both soils achieved a RMSE of 0.012 compared with the traditionally measured water content profile. We also modeled the performance of the new method on previously published hot‐air water content profiles and achieved similar results.