EJEmily de Jong

Emily de Jong

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Emily de Jong has a total of 49 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comment on egusphere-2026-5922

    by Jungmin Lee, Coleman Kendrick, Debojyoti Ghosh, Aaron Lattanzi, Inyeob La, Emily de Jong, Hassan Beydoun, Seong Soo Yum, Shaocheng Xie, Katie Lundquist

    Convection cloud chambers provide a unique platform for investigating aerosol cloud turbulence interactions under well controlled laboratory conditions and for evaluating numerical cloud microphysics models. This study extends the Energy Research and Forecasting model coupled with the Super Droplet Method (ERF-SDM) to simulate statistically stationary cloud chamber experiments through the implementation of Monin Obukhov similarity theory on all chamber walls, continuous aerosol injection, and wall deposition of super droplets. The model is evaluated using the recent Pi Chamber benchmark configuration from the cloud chamber modeling community and laboratory measurements from the Michigan Technological University Pi Chamber. ERF-SDM successfully represents characteristic chamber circulation and qualitative aerosol-dependent microphysical responses under the prescribed boundary conditions. Process-oriented analyses show that increasing aerosol injection strongly reduces mean and root-mean-square supersaturation, with most of the adjustment occurring between injection rates of 1 and 50 cm⁻³ min⁻¹. Higher injection rates also produce smaller cloud droplets and narrower droplet size distributions. However, the spatial standard deviation of supersaturation does not decrease monotonically, indicating that regulation of the mean thermodynamic state is not accompanied by a corresponding reduction in centered spatial variability. The simulations further demonstrate a transition from an aerosol limited regime at low aerosol injection rates to a vapor limited regime at higher aerosol loading, where competition for available water vapor increasingly limits aerosol activation. These results demonstrate that ERF-SDM, with the new cloud chamber capabilities, can effectively simulate laboratory cloud chamber experiments and investigate the coupled interactions among turbulence, supersaturation fluctuations, aerosol activation, and cloud microphysical evolution, providing valuable insights for understanding aerosol and cloud interactions in Earth system models.

  • Open Access

    Reply on AC1

    by Jungmin Lee, Coleman Kendrick, Debojyoti Ghosh, Aaron Lattanzi, Inyeob La, Emily de Jong, Hassan Beydoun, Seong Soo Yum, Shaocheng Xie, Katie Lundquist

    Convection cloud chambers provide a unique platform for investigating aerosol cloud turbulence interactions under well controlled laboratory conditions and for evaluating numerical cloud microphysics models. This study extends the Energy Research and Forecasting model coupled with the Super Droplet Method (ERF-SDM) to simulate statistically stationary cloud chamber experiments through the implementation of Monin Obukhov similarity theory on all chamber walls, continuous aerosol injection, and wall deposition of super droplets. The model is evaluated using the recent Pi Chamber benchmark configuration from the cloud chamber modeling community and laboratory measurements from the Michigan Technological University Pi Chamber. ERF-SDM successfully represents characteristic chamber circulation and qualitative aerosol-dependent microphysical responses under the prescribed boundary conditions. Process-oriented analyses show that increasing aerosol injection strongly reduces mean and root-mean-square supersaturation, with most of the adjustment occurring between injection rates of 1 and 50 cm⁻³ min⁻¹. Higher injection rates also produce smaller cloud droplets and narrower droplet size distributions. However, the spatial standard deviation of supersaturation does not decrease monotonically, indicating that regulation of the mean thermodynamic state is not accompanied by a corresponding reduction in centered spatial variability. The simulations further demonstrate a transition from an aerosol limited regime at low aerosol injection rates to a vapor limited regime at higher aerosol loading, where competition for available water vapor increasingly limits aerosol activation. These results demonstrate that ERF-SDM, with the new cloud chamber capabilities, can effectively simulate laboratory cloud chamber experiments and investigate the coupled interactions among turbulence, supersaturation fluctuations, aerosol activation, and cloud microphysical evolution, providing valuable insights for understanding aerosol and cloud interactions in Earth system models.

  • Open Access

    Reply on CEC1

    by Jungmin Lee, Coleman Kendrick, Debojyoti Ghosh, Aaron Lattanzi, Inyeob La, Emily de Jong, Hassan Beydoun, Seong Soo Yum, Shaocheng Xie, Katie Lundquist

    Convection cloud chambers provide a unique platform for investigating aerosol cloud turbulence interactions under well controlled laboratory conditions and for evaluating numerical cloud microphysics models. This study extends the Energy Research and Forecasting model coupled with the Super Droplet Method (ERF-SDM) to simulate statistically stationary cloud chamber experiments through the implementation of Monin Obukhov similarity theory on all chamber walls, continuous aerosol injection, and wall deposition of super droplets. The model is evaluated using the recent Pi Chamber benchmark configuration from the cloud chamber modeling community and laboratory measurements from the Michigan Technological University Pi Chamber. ERF-SDM successfully represents characteristic chamber circulation and qualitative aerosol-dependent microphysical responses under the prescribed boundary conditions. Process-oriented analyses show that increasing aerosol injection strongly reduces mean and root-mean-square supersaturation, with most of the adjustment occurring between injection rates of 1 and 50 cm⁻³ min⁻¹. Higher injection rates also produce smaller cloud droplets and narrower droplet size distributions. However, the spatial standard deviation of supersaturation does not decrease monotonically, indicating that regulation of the mean thermodynamic state is not accompanied by a corresponding reduction in centered spatial variability. The simulations further demonstrate a transition from an aerosol limited regime at low aerosol injection rates to a vapor limited regime at higher aerosol loading, where competition for available water vapor increasingly limits aerosol activation. These results demonstrate that ERF-SDM, with the new cloud chamber capabilities, can effectively simulate laboratory cloud chamber experiments and investigate the coupled interactions among turbulence, supersaturation fluctuations, aerosol activation, and cloud microphysical evolution, providing valuable insights for understanding aerosol and cloud interactions in Earth system models.

  • Open Access

    Comment on egusphere-2026-5922

    by Jungmin Lee, Coleman Kendrick, Debojyoti Ghosh, Aaron Lattanzi, Inyeob La, Emily de Jong, Hassan Beydoun, Seong Soo Yum, Shaocheng Xie, Katie Lundquist

    Convection cloud chambers provide a unique platform for investigating aerosol cloud turbulence interactions under well controlled laboratory conditions and for evaluating numerical cloud microphysics models. This study extends the Energy Research and Forecasting model coupled with the Super Droplet Method (ERF-SDM) to simulate statistically stationary cloud chamber experiments through the implementation of Monin Obukhov similarity theory on all chamber walls, continuous aerosol injection, and wall deposition of super droplets. The model is evaluated using the recent Pi Chamber benchmark configuration from the cloud chamber modeling community and laboratory measurements from the Michigan Technological University Pi Chamber. ERF-SDM successfully represents characteristic chamber circulation and qualitative aerosol-dependent microphysical responses under the prescribed boundary conditions. Process-oriented analyses show that increasing aerosol injection strongly reduces mean and root-mean-square supersaturation, with most of the adjustment occurring between injection rates of 1 and 50 cm⁻³ min⁻¹. Higher injection rates also produce smaller cloud droplets and narrower droplet size distributions. However, the spatial standard deviation of supersaturation does not decrease monotonically, indicating that regulation of the mean thermodynamic state is not accompanied by a corresponding reduction in centered spatial variability. The simulations further demonstrate a transition from an aerosol limited regime at low aerosol injection rates to a vapor limited regime at higher aerosol loading, where competition for available water vapor increasingly limits aerosol activation. These results demonstrate that ERF-SDM, with the new cloud chamber capabilities, can effectively simulate laboratory cloud chamber experiments and investigate the coupled interactions among turbulence, supersaturation fluctuations, aerosol activation, and cloud microphysical evolution, providing valuable insights for understanding aerosol and cloud interactions in Earth system models.

  • Open Access

    Comment on egusphere-2026-5922 - No compliance with the policy of the journal

    by Jungmin Lee, Coleman Kendrick, Debojyoti Ghosh, Aaron Lattanzi, Inyeob La, Emily de Jong, Hassan Beydoun, Seong Soo Yum, Shaocheng Xie, Katie Lundquist

    Convection cloud chambers provide a unique platform for investigating aerosol cloud turbulence interactions under well controlled laboratory conditions and for evaluating numerical cloud microphysics models. This study extends the Energy Research and Forecasting model coupled with the Super Droplet Method (ERF-SDM) to simulate statistically stationary cloud chamber experiments through the implementation of Monin Obukhov similarity theory on all chamber walls, continuous aerosol injection, and wall deposition of super droplets. The model is evaluated using the recent Pi Chamber benchmark configuration from the cloud chamber modeling community and laboratory measurements from the Michigan Technological University Pi Chamber. ERF-SDM successfully represents characteristic chamber circulation and qualitative aerosol-dependent microphysical responses under the prescribed boundary conditions. Process-oriented analyses show that increasing aerosol injection strongly reduces mean and root-mean-square supersaturation, with most of the adjustment occurring between injection rates of 1 and 50 cm⁻³ min⁻¹. Higher injection rates also produce smaller cloud droplets and narrower droplet size distributions. However, the spatial standard deviation of supersaturation does not decrease monotonically, indicating that regulation of the mean thermodynamic state is not accompanied by a corresponding reduction in centered spatial variability. The simulations further demonstrate a transition from an aerosol limited regime at low aerosol injection rates to a vapor limited regime at higher aerosol loading, where competition for available water vapor increasingly limits aerosol activation. These results demonstrate that ERF-SDM, with the new cloud chamber capabilities, can effectively simulate laboratory cloud chamber experiments and investigate the coupled interactions among turbulence, supersaturation fluctuations, aerosol activation, and cloud microphysical evolution, providing valuable insights for understanding aerosol and cloud interactions in Earth system models.

  • Open Access

    A scalable, GPU-portable super-droplet method for mixed-phase cold microphysics in ERF

    by Debojyoti Ghosh, Hassan Beydoun, Emily K. de Jong, Coleman J. Kendrick, Dana L. McGuffin, David J. Gardner, Katherine A. Lundquist

    Cloud microphysics controls precipitation, latent heating, and the radiative properties of clouds, and it remains a source of complexity in atmospheric models. The super-droplet method is a Lagrangian, particle-based approach that evolves per-particle attributes and makes no assumptions about the shape of the size distribution. Its fidelity comes at a higher computational cost than that of bulk schemes. We present a scalable, portable implementation of the super-droplet method for cold, mixed-phase microphysics in the Energy Research and Forecasting (ERF) code. It includes ice processes such as freezing, deposition, sublimation, riming, aggregation, and a gradual heat-balance melting that retains the mixed-phase state of each particle. The implementation is portable by construction across NVIDIA, AMD, and Intel graphics processing units through the AMReX framework, and we demonstrate it on NVIDIA and AMD hardware. We verify the method against theory and published benchmarks. We then simulate a three-dimensional deep-convection case based on the GARP Atlantic Tropical Experiment (GATE), where the method resolves the ice-particle morphology and the phase structure of the mature cloud without predefined hydrometeor categories. The method scales efficiently to 512 graphics processing units on the deep-convection case with more than a billion super-droplets, and we report and compare the computational cost of the microphysical processes.

  • Open Access

    ERF-SDM Simulations of a Convection Cloud Chamber: Model Development, Benchmark Evaluation, and Aerosol-Cloud-Turbulence Interactions

    by Jungmin Lee, Coleman Kendrick, Debojyoti Ghosh, Aaron Lattanzi, Inyeob La, Emily de Jong, Hassan Beydoun, Seong Soo Yum, Shaocheng Xie, Katie Lundquist

    Convection cloud chambers provide a unique platform for investigating aerosol cloud turbulence interactions under well controlled laboratory conditions and for evaluating numerical cloud microphysics models. This study extends the Energy Research and Forecasting model coupled with the Super Droplet Method (ERF-SDM) to simulate statistically stationary cloud chamber experiments through the implementation of Monin Obukhov similarity theory on all chamber walls, continuous aerosol injection, and wall deposition of super droplets. The model is evaluated using the recent Pi Chamber benchmark configuration from the cloud chamber modeling community and laboratory measurements from the Michigan Technological University Pi Chamber. ERF-SDM successfully represents characteristic chamber circulation and qualitative aerosol-dependent microphysical responses under the prescribed boundary conditions. Process-oriented analyses show that increasing aerosol injection strongly reduces mean and root-mean-square supersaturation, with most of the adjustment occurring between injection rates of 1 and 50 cm⁻³ min⁻¹. Higher injection rates also produce smaller cloud droplets and narrower droplet size distributions. However, the spatial standard deviation of supersaturation does not decrease monotonically, indicating that regulation of the mean thermodynamic state is not accompanied by a corresponding reduction in centered spatial variability. The simulations further demonstrate a transition from an aerosol limited regime at low aerosol injection rates to a vapor limited regime at higher aerosol loading, where competition for available water vapor increasingly limits aerosol activation. These results demonstrate that ERF-SDM, with the new cloud chamber capabilities, can effectively simulate laboratory cloud chamber experiments and investigate the coupled interactions among turbulence, supersaturation fluctuations, aerosol activation, and cloud microphysical evolution, providing valuable insights for understanding aerosol and cloud interactions in Earth system models.

  • Open Access

    Inferring Vertical Cloud Structure From Passive Top‐of‐Atmosphere Observations and Environmental Context With a Mixture Density Network

    by Kevin M. Smalley, Emily de Jong, Nipun Gunawardena, Hassan Beydoun, Aaron S. Donahue, Peter M. Caldwell, Brad Perfect

    Passive satellite observations provide global coverage of cloud‐top and column‐integrated properties but offer limited direct information about vertical cloud structure. Here, we evaluate the extent to which passive cloud‐top, optical, and microphysical retrievals, together with large‐scale environmental variables, constrain CloudSat radar reflectivity profiles. We first establish a cloud‐type‐based baseline using cloud‐top pressure and cloud optical depth, demonstrating that substantial vertical variability remains within fixed cloud types. We then introduce a probabilistic Mixture Density Network that predicts the full conditional distribution of reflectivity profiles from Moderate Resolution Imaging Spectroradiometer cloud‐top, optical, and microphysical properties and European Center for Medium‐Range Weather Forecasts environmental fields. The model reduces both level‐by‐level and joint structural uncertainty relative to cloud‐type compositing, with test correlations between observed and predicted mean profiles ranging from 0.79 to 0.94 across cloud types and mean continuous ranked probability score reductions ranging from 38.17% in shallow cumulus to 67.07% in deep convective clouds. However, non‐negligible uncertainty persists, reflecting residual ambiguity in mapping top‐of‐atmosphere observations and environmental context to full vertical radar‐observed structure. These results quantify the predictive constraints provided by the selected passive cloud properties and environmental variables, while showing that substantial ambiguity remains when inferring vertical cloud structure from top‐of‐atmosphere observations.

  • Open Access

    Data‐Driven Reduced Order Modeling for Warm Rain Microphysics

    by E. K. de Jong, N. Gunawardena, J. E. Katona, H. Beydoun, D. Ghosh, P. Caldwell

    Accurately representing the formation of precipitation due to coalescence of cloud droplets remains a major challenge for atmospheric models. This study introduces and compares three data‐driven approaches for modeling the time evolution of droplet size distributions within a reduced‐order latent space: a polynomial‐based Sparse Identification of Nonlinear Dynamics (SINDy) framework, numerical integration of a neural‐network‐predicted time derivative, and direct prediction of state at the next timestep via neural network. All three methods are coupled and simultaneously trained with an autoencoder that discovers the latent space variables. We train with high‐fidelity data from large eddy simulations equipped with the superdroplet method, which captures the stochastic nature of the coalescence process. Our results show that while all three approaches can successfully emulate the nonlinear behavior of coalescence, the simplest, a polynomial‐based SINDy representation, generalizes most robustly to out‐of‐sample cloud regimes, achieving strong performance and physical consistency. We further quantify model uncertainty using conformal prediction intervals, thereby providing rigorous estimates of predictive confidence across the modeling pipeline. These findings highlight that simple time evolution representations, when coupled with the correct prognostic variables, are a promising approach to advancing data‐driven microphysics parameterizations toward operational atmospheric modeling.

  • Open Access

    Idealized Offshore Low‐Level Jets for Turbine Structural Impact Considerations

    by Emily de Jong, Eliot Quon, Daniel Zalkind

    Low‐level jets (LLJs) describe conditions in which the wind speed reaches a local maximum with respect to altitude near the surface; they have been observed intermittently in the US mid‐Atlantic offshore environment. LLJs pose unique operating conditions for future wind turbines operating in the region, such as negative shear and locally strong veer, but they are not typically considered in existing turbine standards. This work builds upon recent research that explains the formation and evolution of the US mid‐Atlantic LLJs through a simple analytical governing equation. We generate several LLJ inflow conditions with varying jet characteristics based on this analytical model and create monotonically sheared (MS) analogues with matched veer to assess the impacts of the LLJ on turbine performance and loading. Using aeroelastic simulations with these inflow conditions on the International Energy Agency 15‐MW reference turbine, we find that the LLJ leads to a greater range of tower‐top pitching and yawing moments, which could contribute to larger accumulated structural fatigue in components compared to MS inflow. These preliminary results demonstrate a path toward a unified set of test cases for low‐level wind maxima that can inform the International Electrotechnical Commission standards related to offshore wind turbine design.