Anindita Samsu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Anindita Samsu has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Jefter Caldeira
Institute of Earth Sciences, University of Lausanne, 1015 Lausanne, Switzerland
8 shared publications - Peter Graham Betts
School of Earth, Atmosphere and Environment, Monash University, Melbourne, 3800, Australia
8 shared publications Fatemeh Amirpoorsaeed
School of Earth, Atmosphere and Environment, Monash University, Melbourne, 3800, Australia
7 shared publicationsEleanor Morton
School of Earth, Atmosphere and Environment, Monash University, Melbourne, 3800, Australia
6 shared publications- Timothy Chris Schmid
Institute of Geological Sciences, University of Bern, Bern, Switzerland
6 shared publications Weronika Gorczyk
Centre for Exploration Targeting, School of Earth Sciences, University of Western Australia, Perth, 6009, Australia
6 shared publications
Latest Publications
- Open Access
- 29 September 2026
- Published by Copernicus GmbH in Solid Earth
- Vol. 17 (9) , 1087-1115
Towards robust fracture mapping: benchmarking automatic fracture mapping in 2D outcrop imagery
Analysis of fracture geometries, orientation, distribution, and connectivity is commonly conducted to characterise the mechanical and hydraulic properties of a fractured rock mass and to interpret its deformation history. These studies increasingly leverage high-resolution drone imagery (e.g., orthomosaics or orthophotographs). However, consistently and accurately extracting fracture traces from these large datasets remains a persistent challenge. In this contribution, we present a harmonised benchmarking dataset, FraXet, for pixel-wise fracture segmentation of combined high-resolution RGB orthophotographs and digital elevation models (DEMs) (ground sampling distance ranging from approximately 0.5 to 32 mm). FraXet curates images from three publicly available datasets, totalling 8953 256 × 256 RGB + DEM patches spanning diverse lithologies and imaging conditions (ground sampling distance, illumination, etc.) to systematically assess the effectiveness of conventional image-processing approaches for fracture extraction (Canny, Sobel, Gabor, Sato, and phase congruency) and two deep-learning (DL) models (U-Net and SegFormer). Quantitative comparisons using image-quality (e.g., MSE, PSNR), segmentation (e.g., Precision, Recall, F1, IoU), and new task-specific error metrics show that the deep models substantially outperform classical filters (F1 ≈ 0.3–0.5 vs. ± 0.29) and produce smoother, more continuous fracture traces. Training on the combined dataset (M_all) improves cross-site generalisation compared to models trained on individual sub-datasets used in this study. Probability maps derived from the DL approaches enable confidence-based triage and visualisation of model uncertainty. This work establishes a unified benchmark, curated dataset, and reproducible baseline for developing robust automated fracture-detection tools.
- 29 September 2026
- Published by Copernicus GmbH in Solid Earth
- Vol. 17 (9) , 1087-1115
Open AccessTowards robust fracture mapping: benchmarking automatic fracture mapping in 2D outcrop imagery
Analysis of fracture geometries, orientation, distribution, and connectivity is commonly conducted to characterise the mechanical and hydraulic properties of a fractured rock mass and to interpret its deformation history. These studies increasingly leverage high-resolution drone imagery (e.g., orthomosaics or orthophotographs). However, consistently and accurately extracting fracture traces from these large datasets remains a persistent challenge. In this contribution, we present a harmonised benchmarking dataset, FraXet, for pixel-wise fracture segmentation of combined high-resolution RGB orthophotographs and digital elevation models (DEMs) (ground sampling distance ranging from approximately 0.5 to 32 mm). FraXet curates images from three publicly available datasets, totalling 8953 256 × 256 RGB + DEM patches spanning diverse lithologies and imaging conditions (ground sampling distance, illumination, etc.) to systematically assess the effectiveness of conventional image-processing approaches for fracture extraction (Canny, Sobel, Gabor, Sato, and phase congruency) and two deep-learning (DL) models (U-Net and SegFormer). Quantitative comparisons using image-quality (e.g., MSE, PSNR), segmentation (e.g., Precision, Recall, F1, IoU), and new task-specific error metrics show that the deep models substantially outperform classical filters (F1 ≈ 0.3–0.5 vs. ± 0.29) and produce smoother, more continuous fracture traces. Training on the combined dataset (M_all) improves cross-site generalisation compared to models trained on individual sub-datasets used in this study. Probability maps derived from the DL approaches enable confidence-based triage and visualisation of model uncertainty. This work establishes a unified benchmark, curated dataset, and reproducible baseline for developing robust automated fracture-detection tools.
- Open Access
- 31 July 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-35
AC1
Extracting consistent and accurate fracture traces from large volumes of high-resolution imagery remains a persistent challenge in structural analysis. We present a harmonised benchmarking dataset, FraXet, for pixel-wise fracture segmentation in high-resolution RGB orthophotos and digital elevation models (DEMs). FraXet curates images from three publicly available datasets, totalling 8953 256 × 256 RGB+DEM patches spanning diverse lithologies and imaging conditions. We use this dataset to systematically assess traditional image-processing filters (Canny, Sobel, Gabor, Sato, phase congruency) and two deep-learning (DL) models, U-Net and SegFormer, for per-pixel fracture detection. Quantitative comparison using image-quality (e.g., MSE, PSNR), segmentation (e.g., Precision, Recall, F1, IoU) and proposed similarity FracSim metrics suggest that the deep models substantially outperform classical filters (F1 ≈ 03 −0.5 vs ≤ 0.29), giving smoother, more continuous fracture traces with reduced noise. Training on the combined dataset (M_all) improves cross-site generalisation relative to models trained on the individual sub-datasets. Challenges remain in handling annotation misalignments, illumination artifacts, and thin traces. More importantly, probability maps derived from the DL approaches enable confidence-based triage and visualisation of model uncertainty. This work thus establishes a unified benchmark, curated dataset, and reproducible baseline to support further development of robust automated tools for fracture detection.
- 31 July 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-35
Open AccessAC1
Extracting consistent and accurate fracture traces from large volumes of high-resolution imagery remains a persistent challenge in structural analysis. We present a harmonised benchmarking dataset, FraXet, for pixel-wise fracture segmentation in high-resolution RGB orthophotos and digital elevation models (DEMs). FraXet curates images from three publicly available datasets, totalling 8953 256 × 256 RGB+DEM patches spanning diverse lithologies and imaging conditions. We use this dataset to systematically assess traditional image-processing filters (Canny, Sobel, Gabor, Sato, phase congruency) and two deep-learning (DL) models, U-Net and SegFormer, for per-pixel fracture detection. Quantitative comparison using image-quality (e.g., MSE, PSNR), segmentation (e.g., Precision, Recall, F1, IoU) and proposed similarity FracSim metrics suggest that the deep models substantially outperform classical filters (F1 ≈ 03 −0.5 vs ≤ 0.29), giving smoother, more continuous fracture traces with reduced noise. Training on the combined dataset (M_all) improves cross-site generalisation relative to models trained on the individual sub-datasets. Challenges remain in handling annotation misalignments, illumination artifacts, and thin traces. More importantly, probability maps derived from the DL approaches enable confidence-based triage and visualisation of model uncertainty. This work thus establishes a unified benchmark, curated dataset, and reproducible baseline to support further development of robust automated tools for fracture detection.
- Open Access
- 22 May 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-35
Comment on egusphere-2026-1097
Extracting consistent and accurate fracture traces from large volumes of high-resolution imagery remains a persistent challenge in structural analysis. We present a harmonised benchmarking dataset, FraXet, for pixel-wise fracture segmentation in high-resolution RGB orthophotos and digital elevation models (DEMs). FraXet curates images from three publicly available datasets, totalling 8953 256 × 256 RGB+DEM patches spanning diverse lithologies and imaging conditions. We use this dataset to systematically assess traditional image-processing filters (Canny, Sobel, Gabor, Sato, phase congruency) and two deep-learning (DL) models, U-Net and SegFormer, for per-pixel fracture detection. Quantitative comparison using image-quality (e.g., MSE, PSNR), segmentation (e.g., Precision, Recall, F1, IoU) and proposed similarity FracSim metrics suggest that the deep models substantially outperform classical filters (F1 ≈ 03 −0.5 vs ≤ 0.29), giving smoother, more continuous fracture traces with reduced noise. Training on the combined dataset (M_all) improves cross-site generalisation relative to models trained on the individual sub-datasets. Challenges remain in handling annotation misalignments, illumination artifacts, and thin traces. More importantly, probability maps derived from the DL approaches enable confidence-based triage and visualisation of model uncertainty. This work thus establishes a unified benchmark, curated dataset, and reproducible baseline to support further development of robust automated tools for fracture detection.
- 22 May 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-35
Open AccessComment on egusphere-2026-1097
Extracting consistent and accurate fracture traces from large volumes of high-resolution imagery remains a persistent challenge in structural analysis. We present a harmonised benchmarking dataset, FraXet, for pixel-wise fracture segmentation in high-resolution RGB orthophotos and digital elevation models (DEMs). FraXet curates images from three publicly available datasets, totalling 8953 256 × 256 RGB+DEM patches spanning diverse lithologies and imaging conditions. We use this dataset to systematically assess traditional image-processing filters (Canny, Sobel, Gabor, Sato, phase congruency) and two deep-learning (DL) models, U-Net and SegFormer, for per-pixel fracture detection. Quantitative comparison using image-quality (e.g., MSE, PSNR), segmentation (e.g., Precision, Recall, F1, IoU) and proposed similarity FracSim metrics suggest that the deep models substantially outperform classical filters (F1 ≈ 03 −0.5 vs ≤ 0.29), giving smoother, more continuous fracture traces with reduced noise. Training on the combined dataset (M_all) improves cross-site generalisation relative to models trained on the individual sub-datasets. Challenges remain in handling annotation misalignments, illumination artifacts, and thin traces. More importantly, probability maps derived from the DL approaches enable confidence-based triage and visualisation of model uncertainty. This work thus establishes a unified benchmark, curated dataset, and reproducible baseline to support further development of robust automated tools for fracture detection.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
The eastern Lepontine dome nappe stack 3D model (swissAlps3D)
Over the past few decades, 3D geometrical modelling of the subsurface geological structure has become an essential tool in structural geology, significantly improving the visualization and interpretation of complex geological architectures. However, due to their structural complexity and multi-phase deformation histories, orogenic belts remain a major challenge for 3D modelling. The swissAlps3D project (2024-2030), led by swisstopo, aims to build a consistent, large-scale underground 3D geological model of the main geological and structural boundaries of the Swiss Alps and neighbouring regions. The project is subdivided into eight domain-specific sub-projects, including the Lepontine 3D project (LP3D). Here, we present the datasets, modelling strategy, and preliminary results of a 3D geological model of the eastern Lepontine dome.The Lepontine dome consists predominantly of amphibolite-facies metamorphic rocks of late Eocene–Oligocene age and covers approximately 4,500 km² at the surface. At depth, it extends from the Simplon Fault Zone to the west and from the Forcola Line to the east. It is further bounded by the Periadriatic Lineament to the south and the Northern Steep Belt to the north. Structurally, it comprises a tectonic window within the Central Alps, which exposes the deepest Alpine nappes in the core of the bell-shaped architecture. It is made up predominantly of polycyclic basement gneisses, intruded by Permo-Carboniferous granitoids and locally bounded by a thin autochthonous or parautochthonous Mesozoic-Cenozoic sedimentary cover. Moreover, ductile isoclinal sheath folding, complex fold interference structures and a strongly debated tectono-stratigraphy (swisstopo 2024) make the Lepontine dome a challenging area for testing and refining its tectonic evolution and 3D modelling techniques capable of representing such units.The presented 3D geological model, targets the major lithostratigraphic and structural units of the dome and is constructed by combining explicit and implicit 3D modelling approaches that interpolate a heterogeneous input dataset composed of newly acquired and published geological and structural maps, cross-sections, borehole data, existing 3D geological models, and available geophysical constraints from the literature. Preliminary modelling results depict from bottom to top the Leventina-Lucomagno, Simano, Adula, Piz Terri-Lunschania, Vals, Aul, Grava and Tomül nappes. These Lepontic and Lower Penninic units dip eastward at low angle beneath the overlying Pennine and Austroalpine nappe stack. Emphasis is placed on the 3D-architecture of the Lepontic-Penninic boundary, which is dissected by the Forcola extensional shear zone and is interpreted to form an eastward-developing ramp–flat geometry.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessThe eastern Lepontine dome nappe stack 3D model (swissAlps3D)
Over the past few decades, 3D geometrical modelling of the subsurface geological structure has become an essential tool in structural geology, significantly improving the visualization and interpretation of complex geological architectures. However, due to their structural complexity and multi-phase deformation histories, orogenic belts remain a major challenge for 3D modelling. The swissAlps3D project (2024-2030), led by swisstopo, aims to build a consistent, large-scale underground 3D geological model of the main geological and structural boundaries of the Swiss Alps and neighbouring regions. The project is subdivided into eight domain-specific sub-projects, including the Lepontine 3D project (LP3D). Here, we present the datasets, modelling strategy, and preliminary results of a 3D geological model of the eastern Lepontine dome.The Lepontine dome consists predominantly of amphibolite-facies metamorphic rocks of late Eocene–Oligocene age and covers approximately 4,500 km² at the surface. At depth, it extends from the Simplon Fault Zone to the west and from the Forcola Line to the east. It is further bounded by the Periadriatic Lineament to the south and the Northern Steep Belt to the north. Structurally, it comprises a tectonic window within the Central Alps, which exposes the deepest Alpine nappes in the core of the bell-shaped architecture. It is made up predominantly of polycyclic basement gneisses, intruded by Permo-Carboniferous granitoids and locally bounded by a thin autochthonous or parautochthonous Mesozoic-Cenozoic sedimentary cover. Moreover, ductile isoclinal sheath folding, complex fold interference structures and a strongly debated tectono-stratigraphy (swisstopo 2024) make the Lepontine dome a challenging area for testing and refining its tectonic evolution and 3D modelling techniques capable of representing such units.The presented 3D geological model, targets the major lithostratigraphic and structural units of the dome and is constructed by combining explicit and implicit 3D modelling approaches that interpolate a heterogeneous input dataset composed of newly acquired and published geological and structural maps, cross-sections, borehole data, existing 3D geological models, and available geophysical constraints from the literature. Preliminary modelling results depict from bottom to top the Leventina-Lucomagno, Simano, Adula, Piz Terri-Lunschania, Vals, Aul, Grava and Tomül nappes. These Lepontic and Lower Penninic units dip eastward at low angle beneath the overlying Pennine and Austroalpine nappe stack. Emphasis is placed on the 3D-architecture of the Lepontic-Penninic boundary, which is dissected by the Forcola extensional shear zone and is interpreted to form an eastward-developing ramp–flat geometry.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Strike-slip fault zone architecture in folded Upper Malm limestones at Gorges de l’Orbe, Central Internal Jura, Switzerland
Strike-slip fault zones often play a key role in controlling brittle deformation patterns in fold-and-thrust belts. Yet, the distribution of associated fractures and their interactions with fold-related structures remain insufficiently understood across scales and as part of the deformation history. In the Jura Mountains, previous work in the Central Internal Jura, notably at Creux-du-Van, proposed a multi-scale hierarchy of strike-slip faults and associated fracture networks based on sub-seismic structures spanning meter- to kilometer-scale. This study extends the multi-scale structural analysis to a regionally mappable ~12 km long N–S striking sinistral fault zone, the Suchet Fault. The fault is exposed along the E–W-oriented Gorges de l’Orbe, where incision into Upper Malm limestones enables largely continuous outcrop-scale access to fault-related damage zones.To address the multi-scale character of this system, we combine field-based structural mapping at 1:5,000 scale and three-dimensional structural interpretation of publicly available aerial LiDAR data (SwissALTI3D) with systematic fracture data acquisition along four scanlines totaling 157 m. Scanlines are positioned at varying distances from the fault core, defined by the presence of fault breccia and gouge lenses, and across western and eastern structural compartments, spanning fault-proximal to fault-distal domains. This configuration enables comparison between fracture populations associated with fault-zone architecture and those interpreted as fold-related or background fracturing.The Suchet Fault separates two contrasting structural domains. The western compartment is characterized by NW–SE striking fold trains, whereas the eastern compartment exhibits a comparatively flatter structural geometry. Within the vicinity of the fault trace, bedding orientations rotate progressively toward the N–S fault trend, with gentle eastward dips (~15°). Locally, near the fault core, bedding dips steepen and may reach up to 70°, indicating increased strain localization within the damage zone. LiDAR-based structural interpretation identifies three dominant fracture populations, with the NW–SE striking set displaying comparatively longer fractures than the N–S and NE–SW sets.Fault-slip indicators show dominant subvertical conjugate strike-slip pairs at outcrop scale, comprising sinistral N–S to NNE-SSW striking faults and dextral NW–SE striking faults. Preliminary paleostress inversion analysis indicates a strike-slip regime characterized by a subhorizontal NW-directed maximum principal stress and a subvertical intermediate stress, consistent with results from other sectors of the Central Internal Jura. Fracture density (P10) increases toward the fault core, with values close to the brecciated core notably higher than those measured beyond 100 m.This study emphasizes the need for robust fracture set definition and sequencing as a basis for structural analysis, including paleostress orientations and spatial variations in fracture intensity and anisotropy. This study evaluates whether structural patterns and paleostress behaviors identified at Creux-du-Van are comparable to those observed in the Gorges de l’Orbe area, at the scale of larger strike-slip fault zones. It also considers the potential regional implications of these structural features for fracture-controlled fluid flow in the Jura Mountains and potentially downstream, in the geothermal reservoirs beneath the Molasse Basin.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessStrike-slip fault zone architecture in folded Upper Malm limestones at Gorges de l’Orbe, Central Internal Jura, Switzerland
Strike-slip fault zones often play a key role in controlling brittle deformation patterns in fold-and-thrust belts. Yet, the distribution of associated fractures and their interactions with fold-related structures remain insufficiently understood across scales and as part of the deformation history. In the Jura Mountains, previous work in the Central Internal Jura, notably at Creux-du-Van, proposed a multi-scale hierarchy of strike-slip faults and associated fracture networks based on sub-seismic structures spanning meter- to kilometer-scale. This study extends the multi-scale structural analysis to a regionally mappable ~12 km long N–S striking sinistral fault zone, the Suchet Fault. The fault is exposed along the E–W-oriented Gorges de l’Orbe, where incision into Upper Malm limestones enables largely continuous outcrop-scale access to fault-related damage zones.To address the multi-scale character of this system, we combine field-based structural mapping at 1:5,000 scale and three-dimensional structural interpretation of publicly available aerial LiDAR data (SwissALTI3D) with systematic fracture data acquisition along four scanlines totaling 157 m. Scanlines are positioned at varying distances from the fault core, defined by the presence of fault breccia and gouge lenses, and across western and eastern structural compartments, spanning fault-proximal to fault-distal domains. This configuration enables comparison between fracture populations associated with fault-zone architecture and those interpreted as fold-related or background fracturing.The Suchet Fault separates two contrasting structural domains. The western compartment is characterized by NW–SE striking fold trains, whereas the eastern compartment exhibits a comparatively flatter structural geometry. Within the vicinity of the fault trace, bedding orientations rotate progressively toward the N–S fault trend, with gentle eastward dips (~15°). Locally, near the fault core, bedding dips steepen and may reach up to 70°, indicating increased strain localization within the damage zone. LiDAR-based structural interpretation identifies three dominant fracture populations, with the NW–SE striking set displaying comparatively longer fractures than the N–S and NE–SW sets.Fault-slip indicators show dominant subvertical conjugate strike-slip pairs at outcrop scale, comprising sinistral N–S to NNE-SSW striking faults and dextral NW–SE striking faults. Preliminary paleostress inversion analysis indicates a strike-slip regime characterized by a subhorizontal NW-directed maximum principal stress and a subvertical intermediate stress, consistent with results from other sectors of the Central Internal Jura. Fracture density (P10) increases toward the fault core, with values close to the brecciated core notably higher than those measured beyond 100 m.This study emphasizes the need for robust fracture set definition and sequencing as a basis for structural analysis, including paleostress orientations and spatial variations in fracture intensity and anisotropy. This study evaluates whether structural patterns and paleostress behaviors identified at Creux-du-Van are comparable to those observed in the Gorges de l’Orbe area, at the scale of larger strike-slip fault zones. It also considers the potential regional implications of these structural features for fracture-controlled fluid flow in the Jura Mountains and potentially downstream, in the geothermal reservoirs beneath the Molasse Basin.
- Open Access
- 13 March 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-35
Towards robust fracture mapping: benchmarking automatic fracture mapping in 2D outcrop imagery
Extracting consistent and accurate fracture traces from large volumes of high-resolution imagery remains a persistent challenge in structural analysis. We present a harmonised benchmarking dataset, FraXet, for pixel-wise fracture segmentation in high-resolution RGB orthophotos and digital elevation models (DEMs). FraXet curates images from three publicly available datasets, totalling 8953 256 × 256 RGB+DEM patches spanning diverse lithologies and imaging conditions. We use this dataset to systematically assess traditional image-processing filters (Canny, Sobel, Gabor, Sato, phase congruency) and two deep-learning (DL) models, U-Net and SegFormer, for per-pixel fracture detection. Quantitative comparison using image-quality (e.g., MSE, PSNR), segmentation (e.g., Precision, Recall, F1, IoU) and proposed similarity FracSim metrics suggest that the deep models substantially outperform classical filters (F1 ≈ 03 −0.5 vs ≤ 0.29), giving smoother, more continuous fracture traces with reduced noise. Training on the combined dataset (M_all) improves cross-site generalisation relative to models trained on the individual sub-datasets. Challenges remain in handling annotation misalignments, illumination artifacts, and thin traces. More importantly, probability maps derived from the DL approaches enable confidence-based triage and visualisation of model uncertainty. This work thus establishes a unified benchmark, curated dataset, and reproducible baseline to support further development of robust automated tools for fracture detection.
- 13 March 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-35
Open AccessTowards robust fracture mapping: benchmarking automatic fracture mapping in 2D outcrop imagery
Extracting consistent and accurate fracture traces from large volumes of high-resolution imagery remains a persistent challenge in structural analysis. We present a harmonised benchmarking dataset, FraXet, for pixel-wise fracture segmentation in high-resolution RGB orthophotos and digital elevation models (DEMs). FraXet curates images from three publicly available datasets, totalling 8953 256 × 256 RGB+DEM patches spanning diverse lithologies and imaging conditions. We use this dataset to systematically assess traditional image-processing filters (Canny, Sobel, Gabor, Sato, phase congruency) and two deep-learning (DL) models, U-Net and SegFormer, for per-pixel fracture detection. Quantitative comparison using image-quality (e.g., MSE, PSNR), segmentation (e.g., Precision, Recall, F1, IoU) and proposed similarity FracSim metrics suggest that the deep models substantially outperform classical filters (F1 ≈ 03 −0.5 vs ≤ 0.29), giving smoother, more continuous fracture traces with reduced noise. Training on the combined dataset (M_all) improves cross-site generalisation relative to models trained on the individual sub-datasets. Challenges remain in handling annotation misalignments, illumination artifacts, and thin traces. More importantly, probability maps derived from the DL approaches enable confidence-based triage and visualisation of model uncertainty. This work thus establishes a unified benchmark, curated dataset, and reproducible baseline to support further development of robust automated tools for fracture detection.
- Open Access
- 9 February 2026
- Published by Elsevier in Journal of Structural Geology
- Vol. 205
Multi-scale structural analysis of fracture networks in folded limestones: A case study from the Central Internal Jura, Switzerland
- 9 February 2026
- Published by Elsevier in Journal of Structural Geology
- Vol. 205
Open AccessMulti-scale structural analysis of fracture networks in folded limestones: A case study from the Central Internal Jura, Switzerland
- Open Access
- 29 May 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (11) , 1888
Evolution of Rockfall Based on Structure from Motion Reconstruction of Street View Imagery and Unmanned Aerial Vehicle Data: Case Study from Koto Panjang, Indonesia
This study explores the growing application of 3D remote sensing in geohazard studies, particularly for rock slope monitoring. It highlights the use of cost-effective Street View Imagery (SVI) and Unmanned Aerial Vehicles (UAV) through Structure-from-Motion (SfM) photogrammetry as tools for 3D rockfall monitoring. Using multi-temporal SVI and UAV Imagery from the Koto Panjang cliff in Indonesia, we quantify rockfall volume changes over seven years and assess associated geohazards. The results reveal a total rockfall retreat of 5270 m3, with an average annual rate of 7.53 m3/year. Structural analysis identified six major discontinuity sets and confirmed inherent instability within the rock mass. Kinematic simulations using SVI and UAV-derived data further assessed rockfall trajectories and potential impact zones. Results indicate that 40% of simulated rockfall deposits accumulated near existing roads, with significant differences in distribution based on scree slope angles. This emphasizes the role of scree slope in influencing rockfall propagation. In conclusion, SVI and UAV imagery presents a valuable tool for 3D point cloud reconstruction and rockfall hazard assessment, particularly in areas lacking historical data. The study showcases the effectiveness of using SVI and UAV imagery in quantifying historical past rockfall volume and identifies critical areas for mitigation strategies, highlighting the importance of scree slope angle in managing rockfall hazard.
- 29 May 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (11) , 1888
Open AccessEvolution of Rockfall Based on Structure from Motion Reconstruction of Street View Imagery and Unmanned Aerial Vehicle Data: Case Study from Koto Panjang, Indonesia
This study explores the growing application of 3D remote sensing in geohazard studies, particularly for rock slope monitoring. It highlights the use of cost-effective Street View Imagery (SVI) and Unmanned Aerial Vehicles (UAV) through Structure-from-Motion (SfM) photogrammetry as tools for 3D rockfall monitoring. Using multi-temporal SVI and UAV Imagery from the Koto Panjang cliff in Indonesia, we quantify rockfall volume changes over seven years and assess associated geohazards. The results reveal a total rockfall retreat of 5270 m3, with an average annual rate of 7.53 m3/year. Structural analysis identified six major discontinuity sets and confirmed inherent instability within the rock mass. Kinematic simulations using SVI and UAV-derived data further assessed rockfall trajectories and potential impact zones. Results indicate that 40% of simulated rockfall deposits accumulated near existing roads, with significant differences in distribution based on scree slope angles. This emphasizes the role of scree slope in influencing rockfall propagation. In conclusion, SVI and UAV imagery presents a valuable tool for 3D point cloud reconstruction and rockfall hazard assessment, particularly in areas lacking historical data. The study showcases the effectiveness of using SVI and UAV imagery in quantifying historical past rockfall volume and identifies critical areas for mitigation strategies, highlighting the importance of scree slope angle in managing rockfall hazard.
- Open Access
- 25 March 2025
- Published by MDPI AG in Preprints.org
Evolution of Rockfall Based on SfM Reconstruction of SVI (Street View Imagery) and UAV: Case Study from Koto Panjang, Indonesia
This study explores the growing application of 3D remote sensing in geohazard studies, particularly for rock slope monitoring. It highlights Street View Imagery (SVI) as a cost-effective alternative to traditional methods like UAVs. By comparing 3D point clouds generated from SVI data over time, researchers can track rockfall progression and quantify retreat volume. A case study in Koto Panjang cliff, Indonesia, demonstrates this approach. Utilizing seven years of SVI data, the study reveals a total rockfall retreat of 5,270 m3, with an average retreat rate of 7.53 m3/year. Structural analysis identified six major discontinuity sets and confirmed inherent instability within the rock mass. Kinematic simulations using SVI-derived data further assessed rockfall trajectories and potential impact zones. Results indicate that 40 % of simulated rockfall deposits accumulated near existing roads, with significant differences in distribution based on scree slope angles. This emphasizes the role of scree slope in influencing rockfall propagation. In conclusion, SVI presents a valuable tool for 3D point cloud reconstruction and rockfall hazard assessment, particularly in areas lacking historical data. The study showcases the effectiveness of using SVI in quantifying rockfall volume and identifying critical areas for mitigation strategies, highlighting the importance of scree slope angle in managing rockfall hazard.
- 25 March 2025
- Published by MDPI AG in Preprints.org
Open AccessEvolution of Rockfall Based on SfM Reconstruction of SVI (Street View Imagery) and UAV: Case Study from Koto Panjang, Indonesia
This study explores the growing application of 3D remote sensing in geohazard studies, particularly for rock slope monitoring. It highlights Street View Imagery (SVI) as a cost-effective alternative to traditional methods like UAVs. By comparing 3D point clouds generated from SVI data over time, researchers can track rockfall progression and quantify retreat volume. A case study in Koto Panjang cliff, Indonesia, demonstrates this approach. Utilizing seven years of SVI data, the study reveals a total rockfall retreat of 5,270 m3, with an average retreat rate of 7.53 m3/year. Structural analysis identified six major discontinuity sets and confirmed inherent instability within the rock mass. Kinematic simulations using SVI-derived data further assessed rockfall trajectories and potential impact zones. Results indicate that 40 % of simulated rockfall deposits accumulated near existing roads, with significant differences in distribution based on scree slope angles. This emphasizes the role of scree slope in influencing rockfall propagation. In conclusion, SVI presents a valuable tool for 3D point cloud reconstruction and rockfall hazard assessment, particularly in areas lacking historical data. The study showcases the effectiveness of using SVI in quantifying rockfall volume and identifying critical areas for mitigation strategies, highlighting the importance of scree slope angle in managing rockfall hazard.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Seamless Fracture Characterization with Virtual Outcrop Models: Fracture Geometry and Vertical Persistence at Creux-du-Van, Swiss Jura Mountains
Deep geothermal energy is emerging as a key component of Switzerland’s Energy Strategy 2050. In the Canton of Vaud, projects target natural hydrothermal systems at depths of 800 to 1,000 meters, with temperatures ranging from 35 to 100°C, in Upper Malm limestone reservoirs. These limestones, with low matrix porosity and permeability, rely on well-connected fracture networks and karstic features to enhance fluid flow. However, subsurface data from seismic surveys and well data do not fully cover scale intervals that are relevant for reservoir characterization and modeling. To address this limitation, we use a virtual outcrop model (VOM) to characterize fractures in 3D, explore its potential to bridge the length-scale gap, and compare fracture patterns and kinematics between scales of observation. At Creux-du-Van, a unique continuous, 3D exposure of fractured and gently folded Upper Malm limestones in the Central Internal Jura Fold and Thrust Belt provides an exceptional opportunity for fracture characterization at the decimeter to hundreds of meters scale, allowing comparisons with previous structural interpretations at the regional, 1:500,000 to 1:25,000 scale. Approximately 700 fractures were interpreted from high-resolution VOMs, i.e., point clouds (~110 points/m²), of Creux-du-Van, derived from terrestrial LiDAR scanning. These fractures were classified based on vertical persistence, which is a relative measure for the extent to which they propagate across mechano-stratigraphic boundaries. Geometric parameters such as orientation, dimensions (length, width, and aspect ratio), and spacing were also quantified. Field-based structural analysis complements the digital dataset by providing kinematic and chronological interpretations of brittle structures linked to the tectonic evolution of the fold and thrust belt.The lengths of regional strike-slip fault traces span four orders of magnitude, ranging from tens of meters to tens of thousands of meters, with a median of 177 meters. Their orientation, kinematic, and length relationships align with the multi-scale Riedel shear model (Ruhland, 1973) forming the regional structural framework. Fractures in the VOM span scales from 0.1 to hundreds of meters, with a median length of 5 meters. Regional faults and VOM-derived fractures show an overlap in length distributions and consistency in fracture orientations and kinematics. Both align with the NW-SE compression inferred from field-based kinematic data and regional restorations associated with the Jura shortening event, demonstrating seamless characterization of brittle features across scales. This study seeks to further investigate the role of mechanical boundaries (e.g., stratigraphic boundaries, regional structures) in controlling reservoir compartmentalization. It also showcases the potential of outcrop analogues such as Creux-du-Van to support 3D characterization and analyses of fracture properties such as length distributions, orientation, and vertical persistence, ultimately contributing to the advancement of structural modelling of subsurface reservoirs for sustainable energy solutions.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessSeamless Fracture Characterization with Virtual Outcrop Models: Fracture Geometry and Vertical Persistence at Creux-du-Van, Swiss Jura Mountains
Deep geothermal energy is emerging as a key component of Switzerland’s Energy Strategy 2050. In the Canton of Vaud, projects target natural hydrothermal systems at depths of 800 to 1,000 meters, with temperatures ranging from 35 to 100°C, in Upper Malm limestone reservoirs. These limestones, with low matrix porosity and permeability, rely on well-connected fracture networks and karstic features to enhance fluid flow. However, subsurface data from seismic surveys and well data do not fully cover scale intervals that are relevant for reservoir characterization and modeling. To address this limitation, we use a virtual outcrop model (VOM) to characterize fractures in 3D, explore its potential to bridge the length-scale gap, and compare fracture patterns and kinematics between scales of observation. At Creux-du-Van, a unique continuous, 3D exposure of fractured and gently folded Upper Malm limestones in the Central Internal Jura Fold and Thrust Belt provides an exceptional opportunity for fracture characterization at the decimeter to hundreds of meters scale, allowing comparisons with previous structural interpretations at the regional, 1:500,000 to 1:25,000 scale. Approximately 700 fractures were interpreted from high-resolution VOMs, i.e., point clouds (~110 points/m²), of Creux-du-Van, derived from terrestrial LiDAR scanning. These fractures were classified based on vertical persistence, which is a relative measure for the extent to which they propagate across mechano-stratigraphic boundaries. Geometric parameters such as orientation, dimensions (length, width, and aspect ratio), and spacing were also quantified. Field-based structural analysis complements the digital dataset by providing kinematic and chronological interpretations of brittle structures linked to the tectonic evolution of the fold and thrust belt.The lengths of regional strike-slip fault traces span four orders of magnitude, ranging from tens of meters to tens of thousands of meters, with a median of 177 meters. Their orientation, kinematic, and length relationships align with the multi-scale Riedel shear model (Ruhland, 1973) forming the regional structural framework. Fractures in the VOM span scales from 0.1 to hundreds of meters, with a median length of 5 meters. Regional faults and VOM-derived fractures show an overlap in length distributions and consistency in fracture orientations and kinematics. Both align with the NW-SE compression inferred from field-based kinematic data and regional restorations associated with the Jura shortening event, demonstrating seamless characterization of brittle features across scales. This study seeks to further investigate the role of mechanical boundaries (e.g., stratigraphic boundaries, regional structures) in controlling reservoir compartmentalization. It also showcases the potential of outcrop analogues such as Creux-du-Van to support 3D characterization and analyses of fracture properties such as length distributions, orientation, and vertical persistence, ultimately contributing to the advancement of structural modelling of subsurface reservoirs for sustainable energy solutions.