Ann Kathryn Rockwell
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Ann Kathryn Rockwell has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Joe Charles Campbell
Department of Electrical and Computer Engineering, University of Virginia 1 , Charlottesville, Virginia 22903
10 shared publications - Yuan Yuan
Northeastern University
9 shared publications - Seth R. Bank
Department of Electrical and Computer Engineering, University of Texas Austin 2 , Austin, Texas 78758
8 shared publications - Andrew H. Jones
Department of Electrical and Computer Engineering, University of Virginia 1 , Charlottesville, Virginia 22904, USA
6 shared publications Seth R. Bank
Electrical and Computer Engineering Department, University of Texas at Austin, Austin, TX 78758, USA
5 shared publicationsStephen D. March
Electrical and Computer Engineering Department, University of Texas at Austin, Austin, TX 78758, USA
5 shared publications
Latest Publications
- 22 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40 (17) , 5934-5942
Temperature Dependence of Avalanche Breakdown of AlGaAsSb and AlInAsSb Avalanche Photodiodes
Digital alloy Al 0.85 Ga 0.15 As 0.56 Sb 0.44 , random alloy Al 0.85 Ga 0.15 As 0.56 Sb 0.44 , and random alloy Al 0.79 In 0.21 As 0.74 Sb 0.26 are promising candidates for the multiplication regions of avalanche photodiodes (APDs) due to their low excess noise, which is comparable to that of Si APDs. The temperature dependence of avalanche breakdown in these materials has been investigated by measuring the multiplication gain. A weak temperature dependence of the breakdown voltage is observed, which is desirable to reduce the complexity of temperature or reverse bias control circuits in the optical receiver. Calculations of the alloy disorder potentials and alloy scattering rates indicate that the temperature dependence of the avalanche breakdown in these quaternary alloys is attributable to the dominance of large mass variations and high alloy scattering over phonon scattering. Impact ionization can also be impacted by the temperature dependence of the bandgap energy which affects the ionization threshold energy. Therefore, the temperature dependence of the bandgap energy has been investigated by temperature-dependent photoluminescence and external quantum efficiency measurements to further explain the temperature dependent breakdown characteristics of these materials.
- 22 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 40 (17) , 5934-5942
Temperature Dependence of Avalanche Breakdown of AlGaAsSb and AlInAsSb Avalanche Photodiodes
Digital alloy Al 0.85 Ga 0.15 As 0.56 Sb 0.44 , random alloy Al 0.85 Ga 0.15 As 0.56 Sb 0.44 , and random alloy Al 0.79 In 0.21 As 0.74 Sb 0.26 are promising candidates for the multiplication regions of avalanche photodiodes (APDs) due to their low excess noise, which is comparable to that of Si APDs. The temperature dependence of avalanche breakdown in these materials has been investigated by measuring the multiplication gain. A weak temperature dependence of the breakdown voltage is observed, which is desirable to reduce the complexity of temperature or reverse bias control circuits in the optical receiver. Calculations of the alloy disorder potentials and alloy scattering rates indicate that the temperature dependence of the avalanche breakdown in these quaternary alloys is attributable to the dominance of large mass variations and high alloy scattering over phonon scattering. Impact ionization can also be impacted by the temperature dependence of the bandgap energy which affects the ionization threshold energy. Therefore, the temperature dependence of the bandgap energy has been investigated by temperature-dependent photoluminescence and external quantum efficiency measurements to further explain the temperature dependent breakdown characteristics of these materials.
- Open Access
- 2 May 2022
- Published by Wiley in Advanced Optical Materials
- Vol. 10 (15)
A Study of Second‐Order Susceptibility in Digital Alloy‐Grown InAs/AlSb Multiple Quantum Wells
A preliminary measurement of the second‐order nonlinear optical susceptibility of symmetric, coupled, InAs/AlSb multiple quantum well (MQW) structures is acquired through optical second‐harmonic generation (SHG) at fundamental wavelength 1.55 µm. High quality crystalline MQW structures of variable thickness and corresponding bulk AlSb control samples are achieved using a digital alloy epitaxial growth technique that avoids cluster formation and phase segregation. All samples are grown in between a GaSb cap and substrate layer. To isolate SHG from the MQW (or control) layers of interest from cap and substrate contributions, a multilayer optical response matrix model is built and independently tested by accurately reproducing linear reflectivity spectra. While a simplified response matrix analysis of SHG based solely on bulk χ(2)s does not reproduce the distinct SHG responses of the two sets of samples, the inclusion of an additional interface SHG contribution leads to a successful fit of the data and implies . The results demonstrate a proof‐of‐concept quantification of χ(2) in symmetric MQWs and suggest the possibility of engineering χ(2) in these structures, particularly with the introduction of well asymmetries.
- 2 May 2022
- Published by Wiley in Advanced Optical Materials
- Vol. 10 (15)
Open AccessA Study of Second‐Order Susceptibility in Digital Alloy‐Grown InAs/AlSb Multiple Quantum Wells
A preliminary measurement of the second‐order nonlinear optical susceptibility of symmetric, coupled, InAs/AlSb multiple quantum well (MQW) structures is acquired through optical second‐harmonic generation (SHG) at fundamental wavelength 1.55 µm. High quality crystalline MQW structures of variable thickness and corresponding bulk AlSb control samples are achieved using a digital alloy epitaxial growth technique that avoids cluster formation and phase segregation. All samples are grown in between a GaSb cap and substrate layer. To isolate SHG from the MQW (or control) layers of interest from cap and substrate contributions, a multilayer optical response matrix model is built and independently tested by accurately reproducing linear reflectivity spectra. While a simplified response matrix analysis of SHG based solely on bulk χ(2)s does not reproduce the distinct SHG responses of the two sets of samples, the inclusion of an additional interface SHG contribution leads to a successful fit of the data and implies . The results demonstrate a proof‐of‐concept quantification of χ(2) in symmetric MQWs and suggest the possibility of engineering χ(2) in these structures, particularly with the introduction of well asymmetries.
- 6 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 31 (24) , 1948-1951
High Gain, Low Dark Current Al0.8In0.2As0.23Sb0.77 Avalanche Photodiodes
We report Al0.8In0.2As0.23Sb0.77 avalanche photodiodes with high gain (M>1300) and low dark current at room temperature. Impact ionization coefficients for this material system are also extracted, indicating electron-dominant impact ionization. Low avalanche breakdown temperature dependence is demonstrated.
- 6 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 31 (24) , 1948-1951
High Gain, Low Dark Current Al0.8In0.2As0.23Sb0.77 Avalanche Photodiodes
We report Al0.8In0.2As0.23Sb0.77 avalanche photodiodes with high gain (M>1300) and low dark current at room temperature. Impact ionization coefficients for this material system are also extracted, indicating electron-dominant impact ionization. Low avalanche breakdown temperature dependence is demonstrated.
- 21 October 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 115 (17) , 171106
Simulations for InAlAs digital alloy avalanche photodiodes
3D band structure-based Monte Carlo simulations have been utilized to simulate InAlAs digital alloy avalanche photodiodes. The simulated current–voltage curve and excess noise factor fit well with experimental results. Ionization coefficients calculated by the Monte Carlo technique were incorporated into the recurrence model, which is easier to implement and requires less computation time.
- 21 October 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 115 (17) , 171106
Simulations for InAlAs digital alloy avalanche photodiodes
3D band structure-based Monte Carlo simulations have been utilized to simulate InAlAs digital alloy avalanche photodiodes. The simulated current–voltage curve and excess noise factor fit well with experimental results. Ionization coefficients calculated by the Monte Carlo technique were incorporated into the recurrence model, which is easier to implement and requires less computation time.
- Open Access
- 16 September 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 115 (12) , 122105
Characterization of band offsets in AlxIn1-xAsySb1-y alloys with varying Al composition
The unprecedented wide bandgap tunability (∼1 eV) of AlxIn1-xAsySb1-y lattice-matched to GaSb enables the fabrication of photodetectors over a wide range from near-infrared to mid-infrared. In this paper, the valence band-offsets in AlxIn1-xAsySb1-y with different Al compositions are analyzed by tight binding calculations and X-ray photoelectron spectroscopy measurements. The observed weak variation in valence band offsets is consistent with the lack of any minigaps in the valence band, compared to the conduction band.
- 16 September 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 115 (12) , 122105
Open AccessCharacterization of band offsets in AlxIn1-xAsySb1-y alloys with varying Al composition
The unprecedented wide bandgap tunability (∼1 eV) of AlxIn1-xAsySb1-y lattice-matched to GaSb enables the fabrication of photodetectors over a wide range from near-infrared to mid-infrared. In this paper, the valence band-offsets in AlxIn1-xAsySb1-y with different Al compositions are analyzed by tight binding calculations and X-ray photoelectron spectroscopy measurements. The observed weak variation in valence band offsets is consistent with the lack of any minigaps in the valence band, compared to the conduction band.
- Open Access
- 23 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 37 (14) , 3647-3654
Comparison of Different Period Digital Alloy Al${}_{\text{0.7}}$InAsSb Avalanche Photodiodes
We report Al $_{0.7}$ InAsSb avalanche photodiodes grow as ternary-binary and binary-binary digital alloys. Their characteristics of ideality factor, activation energy, temperature-dependent excess noise, temperature stability, and impact ionization coefficients are compared.- 23 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 37 (14) , 3647-3654
Open AccessComparison of Different Period Digital Alloy Al${}_{\text{0.7}}$InAsSb Avalanche Photodiodes
We report Al $_{0.7}$ InAsSb avalanche photodiodes grow as ternary-binary and binary-binary digital alloys. Their characteristics of ideality factor, activation energy, temperature-dependent excess noise, temperature stability, and impact ionization coefficients are compared. - 22 February 2019
- Published by Taylor & Francis in Nanoscale and Microscale Thermophysical Engineering
- Vol. 23 (3) , 211-221
Picosecond transient thermoreflectance for thermal conductivity characterization
We developed a picosecond transient thermoreflectance (ps-TTR) system for thermal property characterization, using a low-repetition-rate picosecond pulsed laser (1064 nm) as the heating source and a 532 nm CW laser as the probe. Low-repetition-rate pump eliminates the complication from thermal accumulation effect. Without the need of a mechanical delay stage, this ps-TTR system can measure the thermal decay curve from 500 ps up to 1 ms. Three groups of samples are tested: bulk crystals (glass, Si, GaAs, and sapphire); MoS2 thin films (157 ~ 900 nm thickness); InGaAs random alloy and GaAs/InAs digital alloy (short period superlattices). Analysis of the thermoreflectance signals shows that this ps-TTR system is able to measure both thermal conductivity and interface conductance in nanostructures. The measured thermal conductivity values in bulk crystals, MoS2 thin films, and InGaAs random alloy are all consistent with literature values. Cross-plane thermal conductivity in MoS2 thin films does not show obvious thickness dependence. Thermal conductivities of GaAs/InAs digital alloys are smaller than InGaAs random alloy, due to the efficient scattering at interfaces. We also discuss the advantages and disadvantages of this newly developed ps-TTR system comparing with the popular time-domain thermoreflectance system.
- 22 February 2019
- Published by Taylor & Francis in Nanoscale and Microscale Thermophysical Engineering
- Vol. 23 (3) , 211-221
Picosecond transient thermoreflectance for thermal conductivity characterization
We developed a picosecond transient thermoreflectance (ps-TTR) system for thermal property characterization, using a low-repetition-rate picosecond pulsed laser (1064 nm) as the heating source and a 532 nm CW laser as the probe. Low-repetition-rate pump eliminates the complication from thermal accumulation effect. Without the need of a mechanical delay stage, this ps-TTR system can measure the thermal decay curve from 500 ps up to 1 ms. Three groups of samples are tested: bulk crystals (glass, Si, GaAs, and sapphire); MoS2 thin films (157 ~ 900 nm thickness); InGaAs random alloy and GaAs/InAs digital alloy (short period superlattices). Analysis of the thermoreflectance signals shows that this ps-TTR system is able to measure both thermal conductivity and interface conductance in nanostructures. The measured thermal conductivity values in bulk crystals, MoS2 thin films, and InGaAs random alloy are all consistent with literature values. Cross-plane thermal conductivity in MoS2 thin films does not show obvious thickness dependence. Thermal conductivities of GaAs/InAs digital alloys are smaller than InGaAs random alloy, due to the efficient scattering at interfaces. We also discuss the advantages and disadvantages of this newly developed ps-TTR system comparing with the popular time-domain thermoreflectance system.
- 21 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 31 (4) , 315-318
AlInAsSb Impact Ionization Coefficients
Digital alloy AlInAsSb avalanche photodiodes exhibit low excess noise comparable to those fabricated from Si. The electron and hole ionization coefficients are critical parameters for simulation and analysis of high-sensitivity receivers. We report ionization coefficients using a mixed injection technique that employs measurement of the gain for different incident wavelengths and a simulation algorithm.
- 21 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 31 (4) , 315-318
AlInAsSb Impact Ionization Coefficients
Digital alloy AlInAsSb avalanche photodiodes exhibit low excess noise comparable to those fabricated from Si. The electron and hole ionization coefficients are critical parameters for simulation and analysis of high-sensitivity receivers. We report ionization coefficients using a mixed injection technique that employs measurement of the gain for different incident wavelengths and a simulation algorithm.
- 1 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 45-46
An AlInAsSb/GaSb Superlattice Analysis – The Digital Alloy Iduced Conduction Band States
Photoreflectance (PR) and photoluminescence (PL) has been measured on the set of four samples containing 12 periods of a GaSb and an AlInAsSb digital alloy with various average Al fractions, both 12nm thick. Using 8kp with envelope function approximation, PL and PR spectra are qualitatively explained. States in conduction bands are classified in three general groups, which are used during further systematic description of various superlattice cases.
- 1 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 45-46
An AlInAsSb/GaSb Superlattice Analysis – The Digital Alloy Iduced Conduction Band States
Photoreflectance (PR) and photoluminescence (PL) has been measured on the set of four samples containing 12 periods of a GaSb and an AlInAsSb digital alloy with various average Al fractions, both 12nm thick. Using 8kp with envelope function approximation, PL and PR spectra are qualitatively explained. States in conduction bands are classified in three general groups, which are used during further systematic description of various superlattice cases.
- 3 September 2018
- Published by AIP Publishing in Applied Physics Letters
- Vol. 113 (10) , 102106
Toward deterministic construction of low noise avalanche photodetector materials
Over the past 40+ years, III-V materials have been intensively studied for avalanche photodetectors, driven by applications including optical communications, imaging, quantum information processing, and autonomous vehicle navigation. Unfortunately, impact ionization is a stochastic process that introduces noise, thereby limiting sensitivity and achievable bandwidths, leading to intense effort to mitigate this noise through the identification of different materials and device structures. Exploration of these materials has seen limited success as it has proceeded in a largely ad hoc fashion due to little consensus regarding which fundamental properties are important. Here, we report an exciting step toward deterministic design of low-noise avalanche photodetector materials by alternating the composition at the monolayer scale; this represents a dramatic departure from previous approaches, which have concentrated on either unconventional compounds/alloys or nanoscale band-engineering. In particular, we demonstrate how to substantially improve upon the noise characteristics of the current state-of-the art telecom avalanche multipliers, In0.52Al0.48As grown on InP substrates, by growing the structure as a strain-balanced digital alloy of InAs and AlAs layers, each only a few atomic layers thick. The effective k-factor, which has historically been considered a fundamental material property, was reduced by 6–7× from k = 0.2 for bulk In0.52Al0.48As to k = 0.05 by using the digital alloy technique. We also demonstrate that these “digital alloys” can significantly extend the photodetector cutoff wavelength well beyond those of their random alloy counterparts.
- 3 September 2018
- Published by AIP Publishing in Applied Physics Letters
- Vol. 113 (10) , 102106
Toward deterministic construction of low noise avalanche photodetector materials
Over the past 40+ years, III-V materials have been intensively studied for avalanche photodetectors, driven by applications including optical communications, imaging, quantum information processing, and autonomous vehicle navigation. Unfortunately, impact ionization is a stochastic process that introduces noise, thereby limiting sensitivity and achievable bandwidths, leading to intense effort to mitigate this noise through the identification of different materials and device structures. Exploration of these materials has seen limited success as it has proceeded in a largely ad hoc fashion due to little consensus regarding which fundamental properties are important. Here, we report an exciting step toward deterministic design of low-noise avalanche photodetector materials by alternating the composition at the monolayer scale; this represents a dramatic departure from previous approaches, which have concentrated on either unconventional compounds/alloys or nanoscale band-engineering. In particular, we demonstrate how to substantially improve upon the noise characteristics of the current state-of-the art telecom avalanche multipliers, In0.52Al0.48As grown on InP substrates, by growing the structure as a strain-balanced digital alloy of InAs and AlAs layers, each only a few atomic layers thick. The effective k-factor, which has historically been considered a fundamental material property, was reduced by 6–7× from k = 0.2 for bulk In0.52Al0.48As to k = 0.05 by using the digital alloy technique. We also demonstrate that these “digital alloys” can significantly extend the photodetector cutoff wavelength well beyond those of their random alloy counterparts.