Hossein Resalati
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hossein Resalati has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Ahmadreza Saraeian
Gorgan Univ Agr Sci & Nat Resources, Dept Pulp & Paper Technol, Gorgan, Golestan, Iran
2 shared publications - Ali Ghasemian
Gorgan University of Agricultural Sciences and Natural Resources
2 shared publications - Bahareh Azimi
Department of Civil and Industrial Engineering University of Pisa Pisa Italy
1 shared publication - Claudia Crestini
Department of Molecular Sciences and Nanosystems, Ca’ Foscari University of Venice, via Torino 155, Mestre, Venice 30172, Italy
1 shared publication - Ghasem Asadpour
185206 Sari Agricultural Sciences and Natural Resources University , Sari , Mazandran , Iran
1 shared publication - Hamidreza Pirayesh
Behbahan Khatam Alanbia University of Technology
1 shared publication
Latest Publications
- Open Access
Manufacturing of Fluff Pulp Using Different Pulp Sources and Bentonite on an Industrial Scale for Absorbent Hygienic Products
In this study, for the first time, a composite fluff pulp was produced based on the combination of softwood (i.e., long-length fiber), hardwood (i.e., short-length fiber), non-wooden pulps (i.e., bagasse) and bentonite, with specific amounts to be used in hygienic pads (e.g., baby diapers and sanitary napkins). After the defibration process, the manufactured fluff pulp was placed as an absorbent mass in diapers and sanitary napkins. Therefore, tests related to the fluff pulp, such as grammage, thickness, density, ash content, humidity percentage, pH and brightness, tests related to the manufactured baby diapers, such as absorption capacity, retention rate, retention capacity, absorption time and rewet, and tests related to the sanitary napkin, such as absorption capacity and rewet, were performed according to the related standards. The results demonstrated that increasing the amount of bagasse pulp led to increasing the ash content, pH and density of fluff pulp and decreasing the brightness. The addition of bentonite as a filler also increased ash content and pH of fluff pulp. The results also demonstrated that increasing of bagasse pulp up to 30% in combination with softwood pulp led to increasing absorption capacity, retention rate, retention capacity, absorption time and rewet of baby diapers and of sanitary napkins.
Open AccessManufacturing of Fluff Pulp Using Different Pulp Sources and Bentonite on an Industrial Scale for Absorbent Hygienic Products
In this study, for the first time, a composite fluff pulp was produced based on the combination of softwood (i.e., long-length fiber), hardwood (i.e., short-length fiber), non-wooden pulps (i.e., bagasse) and bentonite, with specific amounts to be used in hygienic pads (e.g., baby diapers and sanitary napkins). After the defibration process, the manufactured fluff pulp was placed as an absorbent mass in diapers and sanitary napkins. Therefore, tests related to the fluff pulp, such as grammage, thickness, density, ash content, humidity percentage, pH and brightness, tests related to the manufactured baby diapers, such as absorption capacity, retention rate, retention capacity, absorption time and rewet, and tests related to the sanitary napkin, such as absorption capacity and rewet, were performed according to the related standards. The results demonstrated that increasing the amount of bagasse pulp led to increasing the ash content, pH and density of fluff pulp and decreasing the brightness. The addition of bentonite as a filler also increased ash content and pH of fluff pulp. The results also demonstrated that increasing of bagasse pulp up to 30% in combination with softwood pulp led to increasing absorption capacity, retention rate, retention capacity, absorption time and rewet of baby diapers and of sanitary napkins.
- 20 April 2021
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 36 (3) , 536-547
Novel calcium carbonate filler for cellulose industry
Precipitated calcium carbonate (PCC) filler is used in many industrial products like constructions, plastics, pharmaceutics, etc. In this study producing cationic precipitated calcium carbonate filler for paper industry was investigated. Hence, a cationic polyacrylamide and cationic corn starch have been incorporated into the PCC particles to produce a modified filler with cationic structure and improved hydrogen bonding ability with cellulose fibers. According to the FESEM and XRD results, cubic-like fillers with prominently calcite polymorph and a slight amount of aragonite were successfully produced from the industrial burnt lime using carbonation process. The presence of organic substances in the structure of the modified samples was confirmed by FT-IR analysis. Besides, based on the FESEM results, filler morphology and particle size could be affected by the polymer content. In conclusion, introducing cationic groups to mineral fillers could be considered as a possible strategy to overcome some detrimental effects of using mineral fillers in paper products.
- 20 April 2021
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 36 (3) , 536-547
Novel calcium carbonate filler for cellulose industry
Precipitated calcium carbonate (PCC) filler is used in many industrial products like constructions, plastics, pharmaceutics, etc. In this study producing cationic precipitated calcium carbonate filler for paper industry was investigated. Hence, a cationic polyacrylamide and cationic corn starch have been incorporated into the PCC particles to produce a modified filler with cationic structure and improved hydrogen bonding ability with cellulose fibers. According to the FESEM and XRD results, cubic-like fillers with prominently calcite polymorph and a slight amount of aragonite were successfully produced from the industrial burnt lime using carbonation process. The presence of organic substances in the structure of the modified samples was confirmed by FT-IR analysis. Besides, based on the FESEM results, filler morphology and particle size could be affected by the polymer content. In conclusion, introducing cationic groups to mineral fillers could be considered as a possible strategy to overcome some detrimental effects of using mineral fillers in paper products.
- Open Access
Facile Isolation of LCC-Fraction from Organosolv Lignin by Simple Soxhlet Extraction
A new fractionation protocol for wheat straw organosolv lignin was developed on the basis of the dominating H-bonding orientations of its components. Acetone as H-bond accepting aprotic polar solvent and methanol as H-bond donating and accepting protic polar solvent were used in sequence. Obtained fractions were structurally and thermally analysed. The protocol allowed for the generation of purified lignin fractions and the isolation of a novel, yet unobserved lignin carbohydrate complex (LCC) fraction. This LCC fraction was found to contain exclusively phenyl glycosides and γ-esters as LCC motifs.
Open AccessFacile Isolation of LCC-Fraction from Organosolv Lignin by Simple Soxhlet Extraction
A new fractionation protocol for wheat straw organosolv lignin was developed on the basis of the dominating H-bonding orientations of its components. Acetone as H-bond accepting aprotic polar solvent and methanol as H-bond donating and accepting protic polar solvent were used in sequence. Obtained fractions were structurally and thermally analysed. The protocol allowed for the generation of purified lignin fractions and the isolation of a novel, yet unobserved lignin carbohydrate complex (LCC) fraction. This LCC fraction was found to contain exclusively phenyl glycosides and γ-esters as LCC motifs.
- 1 January 2019
- Published by Walter de Gruyter GmbH
Using spent sulfite liquor for valuable fungal biomass production by Aspergilus oryzae
- 1 January 2019
- Published by Walter de Gruyter GmbH
Using spent sulfite liquor for valuable fungal biomass production by Aspergilus oryzae