GBGraeme Ball

Graeme Ball

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Graeme Ball has a total of 154 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Contractile perinuclear actomyosin network promotes peripheral and polar chromosome interaction with the mitotic spindle

    by Nooshin Sheidaei, John K Eykelenboom, Zuojun Yue, Graeme Ball, Alexander Jr Booth, Tomoyuki U Tanaka

    Chromosomes must efficiently and properly interact with the mitotic spindle during prometaphase for correct segregation in anaphase. Chromosomes at the nuclear periphery or behind the spindle poles interact less efficiently with the mitotic spindle, increasing the risk of missegregation. The mechanisms that mitigate such risks in unperturbed cells are unknown. An actomyosin network (PANEM) forms around the nucleus during prophase. While the myosin-II-dependent PANEM contraction immediately after nuclear envelope breakdown (NEBD) facilitates chromosome interaction with the mitotic spindle, the mechanism by which it does so remains unclear. Here, using human cell lines, we show that immediately after NEBD, PANEM contraction directly pushes chromosomes at the nuclear periphery or behind spindle poles toward the center of cells. Detailed tracking of kinetochore movements following light-induced activation of a myosin II inhibitor reveals that this inward movement of chromosomes facilitates kinetochores’ initial interaction with spindle microtubules. It also promotes the onset of kinetochores’ congression toward the spindle mid-plane, but not congression itself once it starts. Thus, PANEM contraction ensures high-fidelity chromosome segregation by relocating chromosomes from unfavorable locations. Since some chromosomally unstable cancer cells fail to establish PANEM during early mitosis, the absence of PANEM may contribute to numerical chromosomal instability in these cells.

  • Open Access

    Contractile perinuclear actomyosin network promotes peripheral and polar chromosome interaction with the mitotic spindle

    by Nooshin Sheidaei, John K Eykelenboom, Zuojun Yue, Graeme Ball, Alexander Jr Booth, Tomoyuki U Tanaka

    Chromosomes must efficiently and properly interact with the mitotic spindle during prometaphase for correct segregation. Chromosomes at the nuclear periphery or behind the spindle poles interact less efficiently with the mitotic spindle, increasing the risk of missegregation during anaphase. The mechanisms that mitigate such risks in unperturbed cells are unknown. An actomyosin network (PANEM) forms around the nucleus during prophase. While the myosin-II-dependent PANEM contraction facilitates chromosome interaction with the mitotic spindle following nuclear envelope breakdown (NEBD), the mechanism by which it does so remains unclear. Here, using human cell lines, we show that immediately after NEBD, PANEM contraction directly pushes chromosomes at the nuclear periphery toward the centre. Detailed tracking of kinetochore movements following light-induced activation of a myosin-II inhibitor reveals that this inward movement facilitates kinetochores’ initial interaction with spindle microtubules. PANEM contraction also promotes the onset of their congression towards the spindle mid-plane, but not congressional motion itself. Furthermore, PANEM contraction reduces the volume of polar regions, helping reposition chromosomes and initiate their congression. Thus, PANEM contraction ensures high-fidelity chromosome segregation by relocating chromosomes from unfavorable locations. Some chromosomally unstable cancer cells fail to establish PANEM during early mitosis, implying its absence in cancer progression.

  • Open Access

    Contractile perinuclear actomyosin network promotes peripheral and polar chromosome interaction with the mitotic spindle

    by Nooshin Sheidaei, John K. Eykelenboom, Zuojun Yue, Graeme Ball, Alexander J.R. Booth, Tomoyuki U. Tanaka

    Chromosomes must efficiently and properly interact with the mitotic spindle during prometaphase for correct segregation in anaphase. Chromosomes at the nuclear periphery or behind the spindle poles interact less efficiently with the mitotic spindle, increasing the risk of missegregation. The mechanisms that mitigate such risks in unperturbed cells are unknown. An actomyosin network (PANEM) forms around the nucleus during prophase. While the myosin-II-dependent PANEM contraction immediately after nuclear envelope breakdown (NEBD) facilitates chromosome interaction with the mitotic spindle, the mechanism by which it does so remains unclear. Here, using human cell lines, we show that immediately after NEBD, PANEM contraction directly pushes chromosomes at the nuclear periphery or behind spindle poles toward the center of cells. Detailed tracking of kinetochore movements following light-induced activation of a myosin-II inhibitor reveals that this inward movement of chromosomes facilitates kinetochores’ initial interaction with spindle microtubules. It also promotes the onset of kinetochores’ congression towards the spindle mid-plane, but not congression itself once it starts. Thus, PANEM contraction ensures high-fidelity chromosome segregation by relocating chromosomes from unfavorable locations. Since some chromosomally unstable cancer cells fail to establish PANEM during early mitosis, the absence of PANEM may contribute to numerical chromosomal instability in these cells. Impact statement: An actomyocin network (PANEM) forms around the nucleus in prophase, and its contraction repositions peripheral and polar chromosomes to facilitate their interaction with the mitotic spindle, ensuring their correct segregation.

  • Open Access

    PML mutants from arsenic-resistant patients reveal SUMO1-TOPORS and SUMO2/3-RNF4 degradation pathways

    by Ellis G. Jaffray, Michael H. Tatham, Barbara Mojsa, Anna Plechanovová, Alejandro Rojas-Fernandez, Julio C.Y. Liu, Niels Mailand, Adel F.M. Ibrahim, Graeme Ball, Iain M. Porter, et al.

    Arsenic effectively treats acute promyelocytic leukemia by inducing SUMO and ubiquitin-dependent degradation of the promyelocytic leukemia (PML)–retinoic acid receptor alpha oncogenic fusion protein. However, some patients relapse with arsenic-resistant disease because of missense mutations in PML. To determine the mechanistic basis for arsenic resistance, PML−/− cells were reconstituted with YFP fusions of wild-type PML-V and two common patient mutants: A216T and L217F. Both mutants were resistant to degradation by arsenic but for different biochemical reasons. Arsenic did not trigger SUMOylation of A216T PML, which failed to recruit the SUMO-targeting ubiquitin ligases RNF4 and TOPORS. L217F PML did respond with increased SUMO2/3 conjugation that facilitated RNF4 engagement but failed to reach the threshold of SUMO1 conjugation required to recruit TOPORS. Thus, neither mutant accumulated the appropriate polyubiquitin signal required for p97 binding. These PML mutants have revealed a convergence of SUMO1, SUMO2/3, TOPORS, and RNF4 that facilitates the arsenic-induced degradation of PML.


  • Open Access

    The p97/VCP segregase is essential for arsenic-induced degradation of PML and PML-RARA

    by Ellis G. Jaffray, Michael H. Tatham, Barbara Mojsa, Magda Liczmanska, Alejandro Rojas-Fernandez, Yili Yin, Graeme Ball, Ronald T. Hay

    Acute Promyelocytic Leukemia is caused by expression of the oncogenic Promyelocytic Leukemia (PML)–Retinoic Acid Receptor Alpha (RARA) fusion protein. Therapy with arsenic trioxide results in degradation of PML-RARA and PML and cures the disease. Modification of PML and PML-RARA with SUMO and ubiquitin precedes ubiquitin-mediated proteolysis. To identify additional components of this pathway, we performed proteomics on PML bodies. This revealed that association of p97/VCP segregase with PML bodies is increased after arsenic treatment. Pharmacological inhibition of p97 altered the number, morphology, and size of PML bodies, accumulated SUMO and ubiquitin modified PML and blocked arsenic-induced degradation of PML-RARA and PML. p97 localized to PML bodies in response to arsenic, and siRNA-mediated depletion showed that p97 cofactors UFD1 and NPLOC4 were critical for PML degradation. Thus, the UFD1-NPLOC4-p97 segregase complex is required to extract poly-ubiquitinated, poly-SUMOylated PML from PML bodies, prior to degradation by the proteasome.


  • Open Access

    Pharmacological rescue of impaired mitophagy in Parkinson’s disease-related LRRK2 G2019S knock-in mice

    by Francois Singh, Alan R Prescott, Philippa Rosewell, Graeme Ball, Alastair D Reith, Ian G Ganley

    Parkinson’s disease (PD) is a major and progressive neurodegenerative disorder, yet the biological mechanisms involved in its aetiology are poorly understood. Evidence links this disorder with mitochondrial dysfunction and/or impaired lysosomal degradation – key features of the autophagy of mitochondria, known as mitophagy. Here, we investigated the role of LRRK2, a protein kinase frequently mutated in PD, in this process in vivo. Using mitophagy and autophagy reporter mice, bearing either knockout of LRRK2 or expressing the pathogenic kinase-activating G2019S LRRK2 mutation, we found that basal mitophagy was specifically altered in clinically relevant cells and tissues. Our data show that basal mitophagy inversely correlates with LRRK2 kinase activity in vivo. In support of this, use of distinct LRRK2 kinase inhibitors in cells increased basal mitophagy, and a CNS penetrant LRRK2 kinase inhibitor, GSK3357679A, rescued the mitophagy defects observed in LRRK2 G2019S mice. This study provides the first in vivo evidence that pathogenic LRRK2 directly impairs basal mitophagy, a process with strong links to idiopathic Parkinson’s disease, and demonstrates that pharmacological inhibition of LRRK2 is a rational mitophagy-rescue approach and potential PD therapy.


  • Open Access

    Founder cell configuration drives competitive outcome within colony biofilms

    by Lukas Eigentler, Margarita Kalamara, Graeme Ball, Cait E. MacPhee, Nicola R. Stanley-Wall, Fordyce A. Davidson

    Bacteria typically form dense communities called biofilms, where cells are embedded in a self-produced extracellular matrix. Competitive interactions between strains within the biofilm context are studied due to their potential applications in biological, medical, and industrial systems. Combining mathematical modelling with experimental assays, we reveal that the spatial structure and the competitive dynamics within biofilms are significantly affected by the location and density of founder cells. Using an isogenic pair of Bacillus subtilis strains, we show that the observed spatial structure and relative strain biomass in a mature biofilm can be mapped directly to the locations of founder cells. Moreover, we define a predictor of competitive outcome that accurately forecasts relative abundance of strains based solely on the founder cells’ access to free space. Consequently, we reveal that variability of competitive outcome in biofilms inoculated at low founder density is a natural consequence of the random positioning of founding cells in the inoculum. Extending our study to non-isogenic strain pairs of B. subtilis, we show that even for strains with different antagonistic strengths, a race for space remains the dominant mode of competition in biofilms inoculated at low founder densities. Our results highlight the importance of spatial dynamics on competitive interactions within biofilms and hence to related applications.


  • Open Access

    Copy of Semi-automated quantitation of macroautophagy with the auto-QC counter v1

    by Francois Singh, Graeme Ball, Ian G Ganley

    General macroautophagy is a naturally occurring phenomenon. Based on our auto-QC reporter, which consists of a tandem mCherry-GFP tag associated with the N terminus of MAP1LC3B/LC3B, we developed the auto-QC counter macro for FIJI. This macro enables the semi-automated detection and quantitation of autophagosomes and autolysosomes with the auto-QC reporter. Here we describe how this macro works, and provide a step-by-step guide on how to use it. The “auto-QC counter” for Fiji/ImageJ (Schindelin et al., 2012; Schneider, Rasband, & Eliceiri, 2012) macro allows semi-automated batch analysis of autophagy in a set of images. Autophagy is identified using differences in fluorescence intensity between the red mCherry and green GFP proteins of an auto-QC reporter delivered to autophagosomes. Similar to the mito-QC reporter (Allen, Toth, James, & Ganley, 2013; McWilliams et al., 2016; Montava-Garriga, Singh, Ball, & Ganley, 2020), the auto-QC reporter displays similar red and green channel intensities outside the lysosome using typical imaging parameters giving a red/green intensity ratio close to 1. In autophagosomes, quenching of the GFP leads to a relatively higher red/green intensity ratio. In contrast to our previously published “mito-QC counter” macro, which first identifies punctae in a red/green ratio channel and then filters according to red intensity, the autophagy counter macro we describe here first identifies punctae in the red channel and then interrogates the red/green ratio. The advantage of this approach is that “yellow” (red+green) punctae are identified for quantification as well as the red-only punctae (the caveat is that the red channel must be relatively “clean” and free from background fluorescence, which is less of a limitation when using the mito-QC counter approach of identifying punctae in the red/green ratio image first). In terms of usage, the autophagy counter macro takes as input a folder of images in which an outline for each cell of interest has been created and added to the image overlay in Fiji/ImageJ before saving as tiff. Upon running the macro the user is first asked to select a folder containing images to analyse. A Dialog then prompts the user to check/adjust the following parameters: 1) and 2) green and red channel index, 3) spot size (in microns), 4) a peak finding threshold to identify punctae, 5) a minimum red intensity for punctae of interest, and 6) a red/green intensity ratio threshold to classify punctae as “red” rather than “yellow”. These parameters are discussed in more detail in the next paragraph. Batch analysis of the images in the input folder then begins, and a new output folder is created with a date and timestamp in the name. A new Results table is created for each run, with one row of results per cell region-of-interest, and this is saved to the output folder with a “spots” image corresponding to each input image that shows the location and classification of the punctae identified. To help use the macro effectively we describe here in words the procedure it follows, as well as taking a more detailed look at the input parameters and results. After choosing the input images and updating parameters the macro first applies a median filter to all channels to reduce the impact of noise on the results. The scale of the median filter is determined by the third macro parameter “spotSize” (in calibrated units, typically microns) – this should be around the same size as the smallest autophagosomes, since making it larger will degrade the resolution to a point where individual autophagosomes are not detected. Next, the macro uses ImageJ’s built-in “Find Maxima” function to identify peaks in a filtered version of the red channel image: the macro implements a “Difference of Gaussian” (DoG) filter to enhance spots at the scale of interest and suppress local background. In layman’s terms this is achieved by subtracting a very blurred version of the original image from a less blurred version of it. The scale of the less blurred version is set according to the spotSize parameter, and the more blurred version is several times this scale (the non-user-adjustable parameter DoGmultiplier = 5 by default). The Find Maxima function used for peak detection then takes an input parameter called Prominence, which determines how much above local background an intensity peak must be to be detected. The Prominence value used for peak detection is determined by the fourth macro parameter “peakNstd”: we apply an autothresholding strategy where we calculate standard deviation (std) of the DoG-filtered red channel intensities and use a threshold Prominence = std x peakNstd. The peakNstd value should be more than zero and less than 5, and we suggest a default value of 2. Having detected candidate intensity peaks in the DoG-filtered red channel, the macro then looks at the original (median-filtered) red channel intensity of each peak. Again, an auto-thresholding strategy is used: peak red intensity values must be greater than or equal to the average (mean) red channel intensity plus a number of standard deviations to be counted as a red spot. The number of standard deviations used to calculate this threshold is set according to the fifth macro parameter, “redMinimumSD” (default = 1). Spots that fail to meet this criterion are classified as “black” to signify insufficient red intensity. Finally, spots are classified as “red” only or “yellow” (i.e. red+green) by looking at the ratio of red channel intensity to green channel intensity: the minimum red/green intensity ratio to be counted as “red” only is determined by the sixth macro parameter “rThresh”. The appropriate value for rThresh will obviously depend on the imaging parameters used for the red and...

  • Open Access

    Semi-automated quantitation of macroautophagy with the auto-QC counter v1

    by Francois Singh, Graeme Ball, Ian G Ganley

    General macroautophagy is a naturally occurring phenomenon. Based on our auto-QC reporter, which consists of a tandem mCherry-GFP tag associated with the N terminus of MAP1LC3B/LC3B, we developed the auto-QC counter macro for FIJI. This macro enables the semi-automated detection and quantitation of autophagosomes and autolysosomes with the auto-QC reporter. Here we describe how this macro works, and provide a step-by-step guide on how to use it. The “auto-QC counter” for Fiji/ImageJ (Schindelin et al., 2012; Schneider, Rasband, & Eliceiri, 2012) macro allows semi-automated batch analysis of autophagy in a set of images. Autophagy is identified using differences in fluorescence intensity between the red mCherry and green GFP proteins of an auto-QC reporter delivered to autophagosomes. Similar to the mito-QC reporter (Allen, Toth, James, & Ganley, 2013; McWilliams et al., 2016; Montava-Garriga, Singh, Ball, & Ganley, 2020), the auto-QC reporter displays similar red and green channel intensities outside the lysosome using typical imaging parameters giving a red/green intensity ratio close to 1. In autophagosomes, quenching of the GFP leads to a relatively higher red/green intensity ratio. In contrast to our previously published “mito-QC counter” macro, which first identifies punctae in a red/green ratio channel and then filters according to red intensity, the autophagy counter macro we describe here first identifies punctae in the red channel and then interrogates the red/green ratio. The advantage of this approach is that “yellow” (red+green) punctae are identified for quantification as well as the red-only punctae (the caveat is that the red channel must be relatively “clean” and free from background fluorescence, which is less of a limitation when using the mito-QC counter approach of identifying punctae in the red/green ratio image first). In terms of usage, the autophagy counter macro takes as input a folder of images in which an outline for each cell of interest has been created and added to the image overlay in Fiji/ImageJ before saving as tiff. Upon running the macro the user is first asked to select a folder containing images to analyse. A Dialog then prompts the user to check/adjust the following parameters: 1) and 2) green and red channel index, 3) spot size (in microns), 4) a peak finding threshold to identify punctae, 5) a minimum red intensity for punctae of interest, and 6) a red/green intensity ratio threshold to classify punctae as “red” rather than “yellow”. These parameters are discussed in more detail in the next paragraph. Batch analysis of the images in the input folder then begins, and a new output folder is created with a date and timestamp in the name. A new Results table is created for each run, with one row of results per cell region-of-interest, and this is saved to the output folder with a “spots” image corresponding to each input image that shows the location and classification of the punctae identified. To help use the macro effectively we describe here in words the procedure it follows, as well as taking a more detailed look at the input parameters and results. After choosing the input images and updating parameters the macro first applies a median filter to all channels to reduce the impact of noise on the results. The scale of the median filter is determined by the third macro parameter “spotSize” (in calibrated units, typically microns) – this should be around the same size as the smallest autophagosomes, since making it larger will degrade the resolution to a point where individual autophagosomes are not detected. Next, the macro uses ImageJ’s built-in “Find Maxima” function to identify peaks in a filtered version of the red channel image: the macro implements a “Difference of Gaussian” (DoG) filter to enhance spots at the scale of interest and suppress local background. In layman’s terms this is achieved by subtracting a very blurred version of the original image from a less blurred version of it. The scale of the less blurred version is set according to the spotSize parameter, and the more blurred version is several times this scale (the non-user-adjustable parameter DoGmultiplier = 5 by default). The Find Maxima function used for peak detection then takes an input parameter called Prominence, which determines how much above local background an intensity peak must be to be detected. The Prominence value used for peak detection is determined by the fourth macro parameter “peakNstd”: we apply an autothresholding strategy where we calculate standard deviation (std) of the DoG-filtered red channel intensities and use a threshold Prominence = std x peakNstd. The peakNstd value should be more than zero and less than 5, and we suggest a default value of 2. Having detected candidate intensity peaks in the DoG-filtered red channel, the macro then looks at the original (median-filtered) red channel intensity of each peak. Again, an auto-thresholding strategy is used: peak red intensity values must be greater than or equal to the average (mean) red channel intensity plus a number of standard deviations to be counted as a red spot. The number of standard deviations used to calculate this threshold is set according to the fifth macro parameter, “redMinimumSD” (default = 1). Spots that fail to meet this criterion are classified as “black” to signify insufficient red intensity. Finally, spots are classified as “red” only or “yellow” (i.e. red+green) by looking at the ratio of red channel intensity to green channel intensity: the minimum red/green intensity ratio to be counted as “red” only is determined by the sixth macro parameter “rThresh”. The appropriate value for rThresh will obviously depend on the imaging parameters used for the red and...

  • Open Access

    BIAFLOWS: A Collaborative Framework to Reproducibly Deploy and Benchmark Bioimage Analysis Workflows

    by Ulysse Rubens, Romain Mormont, Lassi Paavolainen, Volker Bäcker, Benjamin Pavie, Leandro A. Scholz, Gino Michiels, Martin Maška, Devrim Ünay, Graeme Ball, et al.