Mostafa Rajabi
Research Subjects
Mostafa Rajabi has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
Shilpi Agarwal
6 shared publications- Vinod Kumar Gupta
Department of Biological Sciences, Faculty of Science, King Abdulaziz University, Jeddah, Saudi Arabia
6 shared publications Omid Moradi
5 shared publicationsO. Moradi
4 shared publicationsD. Robati
3 shared publications- Mohammad Asif
Department of Chemical Engineering, King Saud University, Riyadh, Saudi Arabia
3 shared publications
Latest Publications
- 1 November 2019
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 293
Removal of toxic chemical ethidium monoazide bromide using graphene oxide: Thermodynamic and kinetics study
- 1 November 2019
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 293
Removal of toxic chemical ethidium monoazide bromide using graphene oxide: Thermodynamic and kinetics study
- 1 June 2019
- Published by Elsevier in Composites Part B: Engineering
- Vol. 167, 544-555
Preparation of PMMA/GO and PMMA/GO-Fe3O4 nanocomposites for malachite green dye adsorption: Kinetic and thermodynamic studies
- 1 June 2019
- Published by Elsevier in Composites Part B: Engineering
- Vol. 167, 544-555
Preparation of PMMA/GO and PMMA/GO-Fe3O4 nanocomposites for malachite green dye adsorption: Kinetic and thermodynamic studies
- 6 February 2019
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (22)
Thermodynamic and kinetic studies of crystal violet dye adsorption with poly(methyl methacrylate)–graphene oxide and poly(methyl methacrylate)–graphene oxide–zinc oxide nanocomposites
We successfully prepared poly(methyl methacrylate) (PMMA)–graphene oxide (GO) and PMMA–GO–zinc oxide (ZnO) nanocomposites and characterized them using different techniques. The adsorption performances of the as‐prepared composites were investigated for crystal violet (CV) dye removal. The contact time as a main factor affecting the adsorption process by adsorbents was studied. Because the adsorption capacity value for CV was found to show no extensive changes after 35 min, 35 min was selected as the best contact time for our system. The adsorption results revealed that the best capacity of CV adsorption onto the PMMA–GO and PMMA–GO–ZnO nanocomposites occurred at pH 12 and 298 K. The respective entropies (−0.208 and −0.168 kJ mol−1 K−1) and enthalpies (−72.86 kJ/mol, and −55.54 kJ/mol) for PMMA–GO and PMMA–GO–ZnO and Gibbs energy revealed that the process of adsorption was exothermic. In addition, the Elovich, pseudo‐first‐order, intraparticle diffusion, and pseudo‐second‐order (four types) models were applied to our kinetic study. Our results indicate that CV adsorption onto PMMA–GO and PMMA–GO–ZnO was good with the pseudo‐second‐order (type 1) and pseudo‐first‐order models because of the low χ2 value and the high correlation coefficient value. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47495.
- 6 February 2019
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (22)
Thermodynamic and kinetic studies of crystal violet dye adsorption with poly(methyl methacrylate)–graphene oxide and poly(methyl methacrylate)–graphene oxide–zinc oxide nanocomposites
We successfully prepared poly(methyl methacrylate) (PMMA)–graphene oxide (GO) and PMMA–GO–zinc oxide (ZnO) nanocomposites and characterized them using different techniques. The adsorption performances of the as‐prepared composites were investigated for crystal violet (CV) dye removal. The contact time as a main factor affecting the adsorption process by adsorbents was studied. Because the adsorption capacity value for CV was found to show no extensive changes after 35 min, 35 min was selected as the best contact time for our system. The adsorption results revealed that the best capacity of CV adsorption onto the PMMA–GO and PMMA–GO–ZnO nanocomposites occurred at pH 12 and 298 K. The respective entropies (−0.208 and −0.168 kJ mol−1 K−1) and enthalpies (−72.86 kJ/mol, and −55.54 kJ/mol) for PMMA–GO and PMMA–GO–ZnO and Gibbs energy revealed that the process of adsorption was exothermic. In addition, the Elovich, pseudo‐first‐order, intraparticle diffusion, and pseudo‐second‐order (four types) models were applied to our kinetic study. Our results indicate that CV adsorption onto PMMA–GO and PMMA–GO–ZnO was good with the pseudo‐second‐order (type 1) and pseudo‐first‐order models because of the low χ2 value and the high correlation coefficient value. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47495.
- 1 March 2018
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 254, 93-97
Adsorption kinetics of lysozyme on multi-walled carbon nanotubes and amino functionalized multi-walled carbon nanotubes from aqueous solution
- 1 March 2018
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 254, 93-97
Adsorption kinetics of lysozyme on multi-walled carbon nanotubes and amino functionalized multi-walled carbon nanotubes from aqueous solution
- Open Access
- 5 October 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (74) , 47083-47090
Removal of dye molecules from aqueous solution by carbon nanotubes and carbon nanotube functional groups: critical review
For the removal and separation of wastewater pollutants, one widely used technique is adsorption. Different materials have been used as adsorbents. Among several adsorbents, carbon nanotubes (CNTs) are emerging as potential adsorbents because of their large surface area, defined cylindrical hollow structure, high ratio aspect, easy modification and hydrophobic wall surfaces. In this review, the capability of adsorption of dyes on CNTs and functionalized CNTs has been compiled. This paper provides data about defects, adsorption sites on CNTs and adsorption process studies under the effect of such various operational parameters as solution pH, contact time, and temperature, and deals with the mechanisms involved in the adsorption of dyes onto CNTs. According to observations from the articles reviewed, functionalized carbon nanotubes have better sorption capacity than as-grown CNTs. For the removal of dyes from aqueous solution, carbon nanotubes (CNTs) have shown good potential and some of the functional groups improve the adsorption potential according to evidence from the literature. For example, the maximum adsorption amount (qmax) of methylene blue dye on an MWCNT surface has been reported to be 100 mg g−1 while the maximum adsorption amount of methylene blue dye on functionalized MWCNT–SH surface was 166.7 mg g−1. This indicates that functionalization is beneficial in increasing the amounts of absorption. However, the development of highly efficient, cost effective environmentally friendly CNT-based nano adsorbents for their commercial applications should be the focus of still more study.
- 5 October 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (74) , 47083-47090
Open AccessRemoval of dye molecules from aqueous solution by carbon nanotubes and carbon nanotube functional groups: critical review
For the removal and separation of wastewater pollutants, one widely used technique is adsorption. Different materials have been used as adsorbents. Among several adsorbents, carbon nanotubes (CNTs) are emerging as potential adsorbents because of their large surface area, defined cylindrical hollow structure, high ratio aspect, easy modification and hydrophobic wall surfaces. In this review, the capability of adsorption of dyes on CNTs and functionalized CNTs has been compiled. This paper provides data about defects, adsorption sites on CNTs and adsorption process studies under the effect of such various operational parameters as solution pH, contact time, and temperature, and deals with the mechanisms involved in the adsorption of dyes onto CNTs. According to observations from the articles reviewed, functionalized carbon nanotubes have better sorption capacity than as-grown CNTs. For the removal of dyes from aqueous solution, carbon nanotubes (CNTs) have shown good potential and some of the functional groups improve the adsorption potential according to evidence from the literature. For example, the maximum adsorption amount (qmax) of methylene blue dye on an MWCNT surface has been reported to be 100 mg g−1 while the maximum adsorption amount of methylene blue dye on functionalized MWCNT–SH surface was 166.7 mg g−1. This indicates that functionalization is beneficial in increasing the amounts of absorption. However, the development of highly efficient, cost effective environmentally friendly CNT-based nano adsorbents for their commercial applications should be the focus of still more study.
- 1 April 2017
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 231, 566-571
Adsorption/desorption study of proteins onto multi-walled carbon nanotubes and amino multi-walled carbon nanotubes surfaces as adsorbents
- 1 April 2017
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 231, 566-571
Adsorption/desorption study of proteins onto multi-walled carbon nanotubes and amino multi-walled carbon nanotubes surfaces as adsorbents
- Open Access
- 30 January 2017
- Published by Springer Nature in International Nano Letters
- Vol. 7 (1) , 35-41
Kinetics adsorption study of the ethidium bromide by graphene oxide as adsorbent from aqueous matrices
- 30 January 2017
- Published by Springer Nature in International Nano Letters
- Vol. 7 (1) , 35-41
Open AccessKinetics adsorption study of the ethidium bromide by graphene oxide as adsorbent from aqueous matrices
- Open Access
- 1 May 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (24) , 11195-11210
Removal of Pb(II) ion from aqueous solution by graphene oxide and functionalized graphene oxide-thiol: effect of cysteamine concentration on the bonding constant
Efficient adsorbent graphene oxide (GO) and its derivative, i.e., thiol-functionalized graphene oxide (GO-SH), was used for the removal of noxious Pb(II) ion from the aqueous phase. Different amounts, i.e., 60, 80, and 100 mg of cysteamine, were used as functionalizing agent to functionalize the GO with thiol group; hence, three different nanocomposites, i.e., GO-SH1, GO-SH2, and GO-SH3 were prepared from the different amount of the cysteamine. The developed nanocomposites were characterized using various analytical techniques such as Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction analysis. The whole removal and adsorption process was well illustrated and investigated. The impact of influential factors including initial concentration, pH, contact time, temperature, and concentrations cysteamine on the adsorption properties of Pb(II) from aqueous solution was well elucidated and optimized. The obtained equilibrium results were inserted in various adsorption isotherm models such as Langmuir (liner types I, II, III, and IV), Freundlich, Temkin, Helsey, and Dubinin-Radushkevich isotherms, it was found that the Langmuir (type I) model demonstrated was well fitted and in good agreement with the maximum adsorption of Pb(II) ion from aqueous solution. Thermodynamic functions, such as ∆G°, ∆H°, and ∆S° were calculated and it reveals that the adsorption of Pb(II) ion on all the surfaces was spontaneous and endothermic in nature.
- 1 May 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (24) , 11195-11210
Open AccessRemoval of Pb(II) ion from aqueous solution by graphene oxide and functionalized graphene oxide-thiol: effect of cysteamine concentration on the bonding constant
Efficient adsorbent graphene oxide (GO) and its derivative, i.e., thiol-functionalized graphene oxide (GO-SH), was used for the removal of noxious Pb(II) ion from the aqueous phase. Different amounts, i.e., 60, 80, and 100 mg of cysteamine, were used as functionalizing agent to functionalize the GO with thiol group; hence, three different nanocomposites, i.e., GO-SH1, GO-SH2, and GO-SH3 were prepared from the different amount of the cysteamine. The developed nanocomposites were characterized using various analytical techniques such as Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction analysis. The whole removal and adsorption process was well illustrated and investigated. The impact of influential factors including initial concentration, pH, contact time, temperature, and concentrations cysteamine on the adsorption properties of Pb(II) from aqueous solution was well elucidated and optimized. The obtained equilibrium results were inserted in various adsorption isotherm models such as Langmuir (liner types I, II, III, and IV), Freundlich, Temkin, Helsey, and Dubinin-Radushkevich isotherms, it was found that the Langmuir (type I) model demonstrated was well fitted and in good agreement with the maximum adsorption of Pb(II) ion from aqueous solution. Thermodynamic functions, such as ∆G°, ∆H°, and ∆S° were calculated and it reveals that the adsorption of Pb(II) ion on all the surfaces was spontaneous and endothermic in nature.
- 1 February 2016
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 214, 259-263
Kinetics and thermodynamics of malachite green dye adsorption from aqueous solutions on graphene oxide and reduced graphene oxide
- 1 February 2016
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 214, 259-263
Kinetics and thermodynamics of malachite green dye adsorption from aqueous solutions on graphene oxide and reduced graphene oxide