Mazyar Dawoodian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mazyar Dawoodian has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Ould el Moctar
Chair of Autonomous and Energy Efficient Maritime Technologies, Technische Universität Berlin, Berlin, Germany
5 shared publications - Abdolrahman Dadvand
Faculty of Mechanical Engineering, Urmia University of Technology, Urmia, Iran
2 shared publications - Ebrahim Kadivar
Institute of Ship Technology, Ocean Engineering and Transport Systems, University of Duisburg-Essen, 47057 Duisburg, Germany
2 shared publications Gohar Moloudi
2 shared publications- Yuxing Lin
Institute for Sustainable and Autonomous Maritime Systems, University of Duisburg-Essen , Duisburg 47057
2 shared publications Amir Hassanzadeh
Department of Mechanical Engineering, Urmia University, Urmia, Iran
1 shared publication
Latest Publications
- Open Access
- 1 April 2026
- Published by Elsevier in Ultrasonics Sonochemistry
- Vol. 129, 107842
Interaction between reflected shock waves and laser-induced cavitation bubbles
- 1 April 2026
- Published by Elsevier in Ultrasonics Sonochemistry
- Vol. 129, 107842
Open AccessInteraction between reflected shock waves and laser-induced cavitation bubbles
- Open Access
- 6 February 2026
- Published by Elsevier in SSRN Electronic Journal
Effects of Phase Transition, Thermodynamics, and Salinity on the Dynamics of Cavitation Bubbles Collapsing Near a Solid Boundary and the Associated 3D Flow
This paper documents investigated phase transition as well as thermal effects and water salinity effects on the dynamics of three-dimensional cavitation bubbles collapsing near solid boundaries by employing mathematical models that account for phase change, compressibility, thermodynamic, and three-dimensional effects. We performed systematic three-dimensional simulations of the two-phase flow by solving the coupled conservation equations of mass, momentum, and energy as well as a transport equation for the volume fraction using a mass transfer model. We conducted extensive verification and validation studies. Results showed that phase transition affected the bubble dynamics substantially, albeit mainly after the bubble’s first collapse. After the initial bubble collapse, the vapor phase heated up to about 460 K. The simulations captured asymmetric jets and toroidal collapse structures, while the experiments on salinity revealed that increased salt concentration weakened bubble rebound and left persistent vapor remnants. The induced pressures, temperatures, and velocities from bubble collapse are presented and discussed.
- 6 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessEffects of Phase Transition, Thermodynamics, and Salinity on the Dynamics of Cavitation Bubbles Collapsing Near a Solid Boundary and the Associated 3D Flow
This paper documents investigated phase transition as well as thermal effects and water salinity effects on the dynamics of three-dimensional cavitation bubbles collapsing near solid boundaries by employing mathematical models that account for phase change, compressibility, thermodynamic, and three-dimensional effects. We performed systematic three-dimensional simulations of the two-phase flow by solving the coupled conservation equations of mass, momentum, and energy as well as a transport equation for the volume fraction using a mass transfer model. We conducted extensive verification and validation studies. Results showed that phase transition affected the bubble dynamics substantially, albeit mainly after the bubble’s first collapse. After the initial bubble collapse, the vapor phase heated up to about 460 K. The simulations captured asymmetric jets and toroidal collapse structures, while the experiments on salinity revealed that increased salt concentration weakened bubble rebound and left persistent vapor remnants. The induced pressures, temperatures, and velocities from bubble collapse are presented and discussed.
- Open Access
- 30 October 2025
- Published by Elsevier in Ultrasonics Sonochemistry
- Vol. 123, 107649
Extending classical nucleation theory to consider curvature and real-gas effects
- 30 October 2025
- Published by Elsevier in Ultrasonics Sonochemistry
- Vol. 123, 107649
Open AccessExtending classical nucleation theory to consider curvature and real-gas effects
- Open Access
Enhanced Classical Nucleation Theory for Cavitation Inception in the Presence of Gaseous Nuclei
This paper introduces an enhanced Classical Nucleation Theory model to predict the cavitation inception pressure and to describe the behavior of nanoscale gaseous nuclei during cavitation. Validation is achieved through molecular dynamics simulations. The findings highlight the significant role of nanoscale gaseous nuclei in lowering the tensile strength required for cavitation initiation. The results show that our enhanced CNT model predicts lower cavitation pressures than the Blake threshold, closely matching molecular dynamics simulations. Finally, our results illustrate that differences between cavitation pressures using the Van der Waals and ideal gas models are greatest for smaller nuclei and lower temperatures.
Open AccessEnhanced Classical Nucleation Theory for Cavitation Inception in the Presence of Gaseous Nuclei
This paper introduces an enhanced Classical Nucleation Theory model to predict the cavitation inception pressure and to describe the behavior of nanoscale gaseous nuclei during cavitation. Validation is achieved through molecular dynamics simulations. The findings highlight the significant role of nanoscale gaseous nuclei in lowering the tensile strength required for cavitation initiation. The results show that our enhanced CNT model predicts lower cavitation pressures than the Blake threshold, closely matching molecular dynamics simulations. Finally, our results illustrate that differences between cavitation pressures using the Van der Waals and ideal gas models are greatest for smaller nuclei and lower temperatures.
- Open Access
- 6 February 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (2) , 293
Experiments on Cavitation Control around a Cylinder Using Biomimetic Riblets
Experimental investigations were conducted to uncover the impact of cavitation control—through the use of biomimetic riblets on cavitating flows around a circular cylinder. First, the dynamics of cavitation in the flow behind a finite cylinder (without riblets) was unveiled by visualizing the cavitation clouds and measuring the lift force fluctuations acting on the cylinder. Second, in a significant step forward, a comprehensive explanation was provided for the cavitation control methods using two bio-inspired riblet morphologies positioned in different orientations and locations on the cylinder. For the first time, the impacts of these tiny formations on the flow dynamics and the associated cavitation process were scrutinized. This showed that scalloped riblets, with their curved design, induced secondary vortices near their tips and distorted primary streamwise vortices, and that high velocity gradients near the jagged pattern peaks of sawtooth riblets delayed flow separation, which affected cavitation.
- 6 February 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (2) , 293
Open AccessExperiments on Cavitation Control around a Cylinder Using Biomimetic Riblets
Experimental investigations were conducted to uncover the impact of cavitation control—through the use of biomimetic riblets on cavitating flows around a circular cylinder. First, the dynamics of cavitation in the flow behind a finite cylinder (without riblets) was unveiled by visualizing the cavitation clouds and measuring the lift force fluctuations acting on the cylinder. Second, in a significant step forward, a comprehensive explanation was provided for the cavitation control methods using two bio-inspired riblet morphologies positioned in different orientations and locations on the cylinder. For the first time, the impacts of these tiny formations on the flow dynamics and the associated cavitation process were scrutinized. This showed that scalloped riblets, with their curved design, induced secondary vortices near their tips and distorted primary streamwise vortices, and that high velocity gradients near the jagged pattern peaks of sawtooth riblets delayed flow separation, which affected cavitation.
- Open Access
- 10 January 2024
- Published by MDPI AG in Preprints.org
Experimental Study of Cavitation Control Around a Circular Cylinder Using a Passive Control Method
Experimental investigations were conducted to uncover the impact of cavitation control - through the use of riblets (mesoscale surface structuring) - on cavitating flows around a circular cylinder. First, the dynamics of cavitation in the flow behind a finite cylinder (without riblets) was unveiled by visualizing the cavitation clouds and measuring the lift force fluctuations acting on the cylinder. Second, as a significant step forward, a comprehensive explanation was provided for the mechanism of cavitation control using two bio-inspired riblet morphologies positioned in different orientations and locations on the cylinder. For the first time, the effects of these tiny structures on the flow dynamics and the associated cavitation process were scrutinized. This showed that scalloped riblets, with their curved design, induced secondary vortices near their tips and distorted primary streamwise vortices, and that high velocity gradients near the jagged pattern peaks of sawtooth riblets delayed flow separation, which affected cavitation.
- 10 January 2024
- Published by MDPI AG in Preprints.org
Open AccessExperimental Study of Cavitation Control Around a Circular Cylinder Using a Passive Control Method
Experimental investigations were conducted to uncover the impact of cavitation control - through the use of riblets (mesoscale surface structuring) - on cavitating flows around a circular cylinder. First, the dynamics of cavitation in the flow behind a finite cylinder (without riblets) was unveiled by visualizing the cavitation clouds and measuring the lift force fluctuations acting on the cylinder. Second, as a significant step forward, a comprehensive explanation was provided for the mechanism of cavitation control using two bio-inspired riblet morphologies positioned in different orientations and locations on the cylinder. For the first time, the effects of these tiny structures on the flow dynamics and the associated cavitation process were scrutinized. This showed that scalloped riblets, with their curved design, induced secondary vortices near their tips and distorted primary streamwise vortices, and that high velocity gradients near the jagged pattern peaks of sawtooth riblets delayed flow separation, which affected cavitation.
- 8 July 2022
- Published by Elsevier in Ocean Engineering
- Vol. 258
Dynamics of a gas bubble near the aperture of a perforated concave rigid plate
- 8 July 2022
- Published by Elsevier in Ocean Engineering
- Vol. 258
Dynamics of a gas bubble near the aperture of a perforated concave rigid plate
- Open Access
- 18 August 2013
- Published by Wiley in ISRN Aerospace Engineering
- Vol. 2013, 1-8
A Numerical and Experimental Study of the Aerodynamics and Stability of a Horizontal Parachute
The flow past a parachute with and without a vent hole at the top is studied both experimentally and numerically. The effects of Reynolds number and vent ratio on the flow behaviour as well as on the drag coefficient are examined. The experiments were carried out under free-flow conditions. In the numerical simulations, the flow was considered as unsteady and turbulent and was modelled using the standard - turbulence model. The experimental results reveal good agreement with the numerical ones. In both the experiments and numerical simulations, the Reynolds number was varied from 85539 to 357250 and the vent ratio was increased from zero to 20%. The results show that the drag coefficient decreases by increasing the Reynolds number for all the cases tested. In addition, it was found that at low and high Reynolds numbers, the parachutes, respectively, with 4% vent ratio and without vent are deemed more efficient. One important result of the present work is related to the effect of vent ratio on the stability of the parachute.
- 18 August 2013
- Published by Wiley in ISRN Aerospace Engineering
- Vol. 2013, 1-8
Open AccessA Numerical and Experimental Study of the Aerodynamics and Stability of a Horizontal Parachute
The flow past a parachute with and without a vent hole at the top is studied both experimentally and numerically. The effects of Reynolds number and vent ratio on the flow behaviour as well as on the drag coefficient are examined. The experiments were carried out under free-flow conditions. In the numerical simulations, the flow was considered as unsteady and turbulent and was modelled using the standard - turbulence model. The experimental results reveal good agreement with the numerical ones. In both the experiments and numerical simulations, the Reynolds number was varied from 85539 to 357250 and the vent ratio was increased from zero to 20%. The results show that the drag coefficient decreases by increasing the Reynolds number for all the cases tested. In addition, it was found that at low and high Reynolds numbers, the parachutes, respectively, with 4% vent ratio and without vent are deemed more efficient. One important result of the present work is related to the effect of vent ratio on the stability of the parachute.