Wasim M. K. Helal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Wasim M. K. Helal has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Dongyan Shi
College of Mechanical and Electrical Engineering, Harbin Engineering University, Harbin 150001, China
3 shared publications - Fengchun Jiang
Harbin Engineering University
2 shared publications - Abdelrahman I. A. Eisa
College of Mechanical and Electrical Engineering
1 shared publication Boyang Zhang
1 shared publicationChen Guangku
College of Power and Energy Eng., Harbin Engineering University, Harbin, 150001, P.R China
1 shared publication- Chuizhou Meng
Zhejiang Sci-Tech University
1 shared publication
Latest Publications
- 5 July 2026
- Published by Springer Nature
- p. 1035-1043
Preparation of Strain Sensors Based on Multi-Walled Carbon Nanotubes and Their Application in Soft Bending Actuator
- 5 July 2026
- Published by Springer Nature
- p. 1035-1043
Preparation of Strain Sensors Based on Multi-Walled Carbon Nanotubes and Their Application in Soft Bending Actuator
- 1 January 2026
- Published by BioResources in BioResources
- Vol. 21 (2)
From papyrus to paper: Evolution of writing supports in Egypt
As the cradle of civilization, Egypt has historically been at the center of the development of writing supports, which were first developed from the local papyrus, but later gradually replaced by true paper. This paper delves into Egypt’s historic change in writing materials. Used for over 4,000 years since around 3000 BCE, papyrus was a central element in the administrative and religious activities of the ancient Egyptian civilization, and the method of its production was an industry secret. The advent of true paper in the 8th century CE, which involved breaking down plant tissue to release fibers, marked the beginning of a cultural change that led to the phasing out of papyrus under Islamic rule. By the time the 12th century CE came around, the making of papyrus had essentially stopped, as paper had taken over, being both more durable and versatile. This study investigates the following: the reign of papyrus; the history and material science of papyrus; the technological shift from lamination to maceration, and comparative analysis of writing supports.
- 1 January 2026
- Published by BioResources in BioResources
- Vol. 21 (2)
From papyrus to paper: Evolution of writing supports in Egypt
As the cradle of civilization, Egypt has historically been at the center of the development of writing supports, which were first developed from the local papyrus, but later gradually replaced by true paper. This paper delves into Egypt’s historic change in writing materials. Used for over 4,000 years since around 3000 BCE, papyrus was a central element in the administrative and religious activities of the ancient Egyptian civilization, and the method of its production was an industry secret. The advent of true paper in the 8th century CE, which involved breaking down plant tissue to release fibers, marked the beginning of a cultural change that led to the phasing out of papyrus under Islamic rule. By the time the 12th century CE came around, the making of papyrus had essentially stopped, as paper had taken over, being both more durable and versatile. This study investigates the following: the reign of papyrus; the history and material science of papyrus; the technological shift from lamination to maceration, and comparative analysis of writing supports.
- Open Access
- 12 December 2025
- Published by EWA Publishing in Advances in Engineering Innovation
- Vol. 16 (11) , 62-70
Research on production line simulation method based on digital twin
Addressing the challenge of insufficient behavioral modeling accuracy in digital twin-driven production line simulation, this study targets the inherent limitations of "state explosion" and "behavioral black box" in traditional Finite State Machines when describing complex, concurrent equipment beha)viors. An innovative simulation method is proposed, centering on an Improved Finite State Machine (IFSM) that formally incorporates a set of intermediate states to explicitly characterize component-level collaborative workflows and key transition steps. This is integrated within a three-tier modeling architecture to enable modular encapsulation and reuse of behavioral logic. Experimental validation through a stacker case study demonstrates that the implemented prototype system effectively simulates normal, disturbed, and fault conditions. Compared to traditional FSMs, the proposed method reduces model transition rule complexity and achieves component-level fault localization accuracy while maintaining real-time performance. This study proves the method's feasibility and superiority in enhancing the correctness, stability, and maintainability of production line simulations, providing a viable technical pathway for constructing high-fidelity and high-reliability digital twin systems.
- 12 December 2025
- Published by EWA Publishing in Advances in Engineering Innovation
- Vol. 16 (11) , 62-70
Open AccessResearch on production line simulation method based on digital twin
Addressing the challenge of insufficient behavioral modeling accuracy in digital twin-driven production line simulation, this study targets the inherent limitations of "state explosion" and "behavioral black box" in traditional Finite State Machines when describing complex, concurrent equipment beha)viors. An innovative simulation method is proposed, centering on an Improved Finite State Machine (IFSM) that formally incorporates a set of intermediate states to explicitly characterize component-level collaborative workflows and key transition steps. This is integrated within a three-tier modeling architecture to enable modular encapsulation and reuse of behavioral logic. Experimental validation through a stacker case study demonstrates that the implemented prototype system effectively simulates normal, disturbed, and fault conditions. Compared to traditional FSMs, the proposed method reduces model transition rule complexity and achieves component-level fault localization accuracy while maintaining real-time performance. This study proves the method's feasibility and superiority in enhancing the correctness, stability, and maintainability of production line simulations, providing a viable technical pathway for constructing high-fidelity and high-reliability digital twin systems.
- Open Access
- 11 September 2025
- Published by Deep Science Publishing
3D Printing and Additive Manufacturing: Technologies, Applications, and Future Directions
3D printing or additive manufacturing has become a revolutionary technology that is expected to disrupt a lot of industries. A simple tool for rapid prototypes grew up into the manufacturing method we have now developed. It is possible to generate complex shapes and functional components almost of any kind of material, enabling a new freedom in design and manufacturing. This book is a comprehensive guide to the wide and diverse world of 3D printing and related techniques. We’ll take a look at how it’s being used in applications today, the design considerations you should keep in mind, and how this new technology could continue to evolve in the future. We want to provide you with a comprehensive overview of how 3D printing is molding sectors and the world at large. In order to really get a sense of the significance of 3D printing, one must relate it to the context of technology and history that it has emerged from. The idea of layer wise material buildup, a fundamental aspect of additive manufacturing, originated in the 1980s as an approach to rapid prototyping. Prior to 3D printing, rapid prototyping was a time-consuming and costly affair due to the drawbacks of sharp edged tools, subtractive cutting methods, the frequent human errors, manual skill requirements, and lathe notching among the subtractive cutting methods, that are detrimentally persistent in these technologies, resulting in limited efficiency and tight dimensional tolerances, a significant amount of waste material, and labour-intensiveness. 3D printing was a game changer, it allowed designers and engineers to a produce precision, intricate models straight from a digital file cutting time and costs in half. More and more, 3D printing has become part of the production shop floor and research laboratory, not to mention kitchen table. Photo One great benefit of this technology is that it can process plastics, metals, ceramics, biomaterials and food. The ability to generate custom products where there is demand, without expensive molds or tools, has opened up vast fields of opportunity in aerospace, medicine and fashion. This flexibility makes businesses can tailor themselves in a personal level – therefore easier to be creative. And pot calling kettle, it’s not hyperbole to say that 3D printing is transforming manufacturing from a world where things are made to one where they are created, in which objects of every summer and continent (from design classics to human body parts) do not come into being end masse but custom-erupt in orgy of form and (your) function. By journeying through the current and future potential of 3D printing, this book will launch you into the innovative and emergent world of 3D printing. We’ll examine in much more detail how 3D printing is already revolutionizing traditional manufacturing. This capability results in rapid iterations of designs, shorter lead times, and less waste, leading to an overall more efficient and sustainable process. Such advances do not only lead to cost reductions, but also support sustainable developments considering that the additive manufacturing techniques usually demand less material and energy compared to conventional manufacturing. The most exciting possibility with 3D printing is the opportunity to democratise manufacturing. Small companies, entrepreneurs and inventors now have access to production capability that, in the past, only large budgeted, specialty facility serviced corporations did. And then also 3D printing is, I feel like, taking a bit sort of like some of the extremes of what we can do with design even too. It’s allowing new possibilities in design that in many cases were not achievable before, letting designers push around more extreme forms and structures that do more than simply look cool. Cost of complex production: Traditional manufacturing does a bad job of enabling the production of complex products. Products are designed according to the limitations of the production process. Additive manufacturing, on the other hand, facilitates complex internal structures, lightweight lattice systems as well as functional integration, many of which have been, at best, impossible to achieve or, at worst, laughably expensive to even consider. That’s forcing engineers and designers to start by rethinking how you design in the first place, with new materials and hybrid solutions that can combine many functions in one component. Medical applications of 3D printing have been one of the most rapidly developing areas. Patient-specific implants, prosthesis, surgical jigs and perhaps even bioprinting of tissues are a fantastic advancement in patient care. The technology provides patients customised treatment options according to the specific anatomy, enhancing outcomes and quality of life. Living cells and organs have naturally been an exciting frontier for research, which can potentially revolutionize transplantation and regenerative medicine in the future. Moreover, with the increasing use of 3D printing, ethical and environmental aspects should be responsibly considered. The possibility of IPR disputes, counterfeit products and non-regulated manufacturing all begs questions of governance and responsibility. And just as additive manufacturing lessens waste, energy consumption is still high on some of the processes, which demands constant innovation in sustainable practices and materials. Looking into the horizon, 3D printing looks diverse and exciting. I think we will also see the rise of another trend, such as multi-material printing, an increased focus on advanced robotics (technology integration), AI driven design and process optimization, and growing reach of bioprinting and nanomanufacturing. The intersection of these technologies is projected to enable new products and markets, including smart manufacturing spaces and personalized consumer goods that would adapt to their users on the fly. This book is for anyone...
- 11 September 2025
- Published by Deep Science Publishing
Open Access3D Printing and Additive Manufacturing: Technologies, Applications, and Future Directions
3D printing or additive manufacturing has become a revolutionary technology that is expected to disrupt a lot of industries. A simple tool for rapid prototypes grew up into the manufacturing method we have now developed. It is possible to generate complex shapes and functional components almost of any kind of material, enabling a new freedom in design and manufacturing. This book is a comprehensive guide to the wide and diverse world of 3D printing and related techniques. We’ll take a look at how it’s being used in applications today, the design considerations you should keep in mind, and how this new technology could continue to evolve in the future. We want to provide you with a comprehensive overview of how 3D printing is molding sectors and the world at large. In order to really get a sense of the significance of 3D printing, one must relate it to the context of technology and history that it has emerged from. The idea of layer wise material buildup, a fundamental aspect of additive manufacturing, originated in the 1980s as an approach to rapid prototyping. Prior to 3D printing, rapid prototyping was a time-consuming and costly affair due to the drawbacks of sharp edged tools, subtractive cutting methods, the frequent human errors, manual skill requirements, and lathe notching among the subtractive cutting methods, that are detrimentally persistent in these technologies, resulting in limited efficiency and tight dimensional tolerances, a significant amount of waste material, and labour-intensiveness. 3D printing was a game changer, it allowed designers and engineers to a produce precision, intricate models straight from a digital file cutting time and costs in half. More and more, 3D printing has become part of the production shop floor and research laboratory, not to mention kitchen table. Photo One great benefit of this technology is that it can process plastics, metals, ceramics, biomaterials and food. The ability to generate custom products where there is demand, without expensive molds or tools, has opened up vast fields of opportunity in aerospace, medicine and fashion. This flexibility makes businesses can tailor themselves in a personal level – therefore easier to be creative. And pot calling kettle, it’s not hyperbole to say that 3D printing is transforming manufacturing from a world where things are made to one where they are created, in which objects of every summer and continent (from design classics to human body parts) do not come into being end masse but custom-erupt in orgy of form and (your) function. By journeying through the current and future potential of 3D printing, this book will launch you into the innovative and emergent world of 3D printing. We’ll examine in much more detail how 3D printing is already revolutionizing traditional manufacturing. This capability results in rapid iterations of designs, shorter lead times, and less waste, leading to an overall more efficient and sustainable process. Such advances do not only lead to cost reductions, but also support sustainable developments considering that the additive manufacturing techniques usually demand less material and energy compared to conventional manufacturing. The most exciting possibility with 3D printing is the opportunity to democratise manufacturing. Small companies, entrepreneurs and inventors now have access to production capability that, in the past, only large budgeted, specialty facility serviced corporations did. And then also 3D printing is, I feel like, taking a bit sort of like some of the extremes of what we can do with design even too. It’s allowing new possibilities in design that in many cases were not achievable before, letting designers push around more extreme forms and structures that do more than simply look cool. Cost of complex production: Traditional manufacturing does a bad job of enabling the production of complex products. Products are designed according to the limitations of the production process. Additive manufacturing, on the other hand, facilitates complex internal structures, lightweight lattice systems as well as functional integration, many of which have been, at best, impossible to achieve or, at worst, laughably expensive to even consider. That’s forcing engineers and designers to start by rethinking how you design in the first place, with new materials and hybrid solutions that can combine many functions in one component. Medical applications of 3D printing have been one of the most rapidly developing areas. Patient-specific implants, prosthesis, surgical jigs and perhaps even bioprinting of tissues are a fantastic advancement in patient care. The technology provides patients customised treatment options according to the specific anatomy, enhancing outcomes and quality of life. Living cells and organs have naturally been an exciting frontier for research, which can potentially revolutionize transplantation and regenerative medicine in the future. Moreover, with the increasing use of 3D printing, ethical and environmental aspects should be responsibly considered. The possibility of IPR disputes, counterfeit products and non-regulated manufacturing all begs questions of governance and responsibility. And just as additive manufacturing lessens waste, energy consumption is still high on some of the processes, which demands constant innovation in sustainable practices and materials. Looking into the horizon, 3D printing looks diverse and exciting. I think we will also see the rise of another trend, such as multi-material printing, an increased focus on advanced robotics (technology integration), AI driven design and process optimization, and growing reach of bioprinting and nanomanufacturing. The intersection of these technologies is projected to enable new products and markets, including smart manufacturing spaces and personalized consumer goods that would adapt to their users on the fly. This book is for anyone...
- 13 June 2023
- Published by Elsevier in Ocean Engineering
- Vol. 282
Accurate and real-time prediction of umbilical component layout optimization based on convolutional neural network
- 13 June 2023
- Published by Elsevier in Ocean Engineering
- Vol. 282
Accurate and real-time prediction of umbilical component layout optimization based on convolutional neural network
- Open Access
- 8 February 2022
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2022, 1-10
Transient Analysis Method of an Axially Magnetized Novel Passive Eddy Current Damper for Suppressing Lateral Vibrations
A passive eddy current damper (PECD) can be adopted to provide a damping effect and drag force in rotating structure applications. The damping effect is formed as the result of induced eddy current, while the drag force is produced as the result of the repulsive force between the same axially poled magnets. However, modeling and approximating the damping effect, repulsive force, stiffness, the magnetic flux density (MFD) distribution, and eddy current prompted in PECD is a challenging task because of the complicated structure and operational conditions. This paper presents a new method for modeling and estimating the dynamic parameters of novel PECDs such as the damping effect, repulsive force, and stiffness for suppressing vibration in rotating structure applications. This self-powered, cost-effective PECD utilizes four arc-shaped and single ring-shaped permanent magnets with a cylindrical conductor placed between the arc magnets and the ring magnet to generate a damping effect and spring. Eddy currents are generated in the cylindrical conductor as the effect of the relative motion of the ring magnet concerning the arc magnets. An accurate and transient analysis method of the proposed system is carried out by using a three-dimensional finite-element method (3D-FEM). According to the procedures applied in the FE model solution, this new numerical method is appropriate and validated for analyzing PECDs and gaining good results by configuring the conductor and permanent magnets symmetrically. Finally, this novel 3D transient analysis method presents a perfect ability and accuracy for both modeling and calculating the PECD parameters.
- 8 February 2022
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2022, 1-10
Open AccessTransient Analysis Method of an Axially Magnetized Novel Passive Eddy Current Damper for Suppressing Lateral Vibrations
A passive eddy current damper (PECD) can be adopted to provide a damping effect and drag force in rotating structure applications. The damping effect is formed as the result of induced eddy current, while the drag force is produced as the result of the repulsive force between the same axially poled magnets. However, modeling and approximating the damping effect, repulsive force, stiffness, the magnetic flux density (MFD) distribution, and eddy current prompted in PECD is a challenging task because of the complicated structure and operational conditions. This paper presents a new method for modeling and estimating the dynamic parameters of novel PECDs such as the damping effect, repulsive force, and stiffness for suppressing vibration in rotating structure applications. This self-powered, cost-effective PECD utilizes four arc-shaped and single ring-shaped permanent magnets with a cylindrical conductor placed between the arc magnets and the ring magnet to generate a damping effect and spring. Eddy currents are generated in the cylindrical conductor as the effect of the relative motion of the ring magnet concerning the arc magnets. An accurate and transient analysis method of the proposed system is carried out by using a three-dimensional finite-element method (3D-FEM). According to the procedures applied in the FE model solution, this new numerical method is appropriate and validated for analyzing PECDs and gaining good results by configuring the conductor and permanent magnets symmetrically. Finally, this novel 3D transient analysis method presents a perfect ability and accuracy for both modeling and calculating the PECD parameters.
- Open Access
- 1 May 2021
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1939 (1) , 012023
Analysis of Low-Speed Diesel Engine Connecting Rod Made of AL360
Connecting rod is one of the most important and critical components in an engine. The scientists should work on it in order to improve its performance. In the current study, in order to analyse the stress and deformation surrounding the connecting rod, the 3 D model is built. A connecting rod made of AL360 is investigated in this study. Stress distribution and deformation of a con-rod made of AL360 are carried out.
- 1 May 2021
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1939 (1) , 012023
Open AccessAnalysis of Low-Speed Diesel Engine Connecting Rod Made of AL360
Connecting rod is one of the most important and critical components in an engine. The scientists should work on it in order to improve its performance. In the current study, in order to analyse the stress and deformation surrounding the connecting rod, the 3 D model is built. A connecting rod made of AL360 is investigated in this study. Stress distribution and deformation of a con-rod made of AL360 are carried out.
- 1 February 2019
- Published by Trans Tech Publications, Ltd. in International Journal of Engineering Research in Africa
- Vol. 41, 26-36
Optimization of Parameters Influencing the Quality Loss of Machine Motorized Spindle Using Design Exploration and Taguchi Methods
The quality loss caused by tolerance of factors can be reduced when the nominal values of design-factors are carefully chosen. Therefore, the parametric optimization method is significant to an optimally define the Quality Loss cost (QLc). In this work, the Design Exploration (DE) and Taguchi Methods along with unforced Rotordynamic analysis have been used to find the optimal levels of factors affecting the QLc. Under definite constraints, the mathematical models are developed for an optimization problem and then utilized to develop Machine Motorized Spindle (MMS). In order to find the optimal levels of the factors, the sensitivities of factors on structural weight and First-Order-Nature-Frequency (FONF) has been analyzed using Response-Surface (RS) method, while the Taguchi method is used to find the QLc. The results found shown that there are significant enhancements in signal-to-noise ratio for structural weight and FONF. The QLc has been saved to about more than half-time by comparing to its initial values. The results also indicated that the proposed optimization approach is feasible and successful in improving dynamic characteristics and QLc saving for the MMS. Keywords: Machine Motorized Spindle, Finite Element Method, Unforced Vibration, Rotordynamic Analyses, Response Surface Method, Taguchi Quality Loss cost.
- 1 February 2019
- Published by Trans Tech Publications, Ltd. in International Journal of Engineering Research in Africa
- Vol. 41, 26-36
Optimization of Parameters Influencing the Quality Loss of Machine Motorized Spindle Using Design Exploration and Taguchi Methods
The quality loss caused by tolerance of factors can be reduced when the nominal values of design-factors are carefully chosen. Therefore, the parametric optimization method is significant to an optimally define the Quality Loss cost (QLc). In this work, the Design Exploration (DE) and Taguchi Methods along with unforced Rotordynamic analysis have been used to find the optimal levels of factors affecting the QLc. Under definite constraints, the mathematical models are developed for an optimization problem and then utilized to develop Machine Motorized Spindle (MMS). In order to find the optimal levels of the factors, the sensitivities of factors on structural weight and First-Order-Nature-Frequency (FONF) has been analyzed using Response-Surface (RS) method, while the Taguchi method is used to find the QLc. The results found shown that there are significant enhancements in signal-to-noise ratio for structural weight and FONF. The QLc has been saved to about more than half-time by comparing to its initial values. The results also indicated that the proposed optimization approach is feasible and successful in improving dynamic characteristics and QLc saving for the MMS. Keywords: Machine Motorized Spindle, Finite Element Method, Unforced Vibration, Rotordynamic Analyses, Response Surface Method, Taguchi Quality Loss cost.
- 5 November 2018
- Published by Trans Tech Publications, Ltd. in Journal of Biomimetics, Biomaterials and Biomedical Engineering
- Vol. 39, 24-39
Determination of the Optimum Material Gradient for a Functionally Graded Endodontic Prefabricated Post Using a Sub-Problem Approximation Method
The treatment process of a tooth every short period has many disadvantages to the dental patient, for instance, wasting time, losing money, and tiring the dental patient. Therefore, selecting the suitable technique for treating the tooth, with increasing the lifetime of the tooth has become more necessary in the daily life of the dental scientists. In the present days, an Endodontic Prefabricated Post (EPP) plays an important vital role in the treatment process of the tooth. Comparisons among von Mises stress, shear stress, and deformation of homogenous cases were investigated in the present work through the finite element analysis (FEA). The effect of EPP material on von Mises stress, shear stress, and deformation components occurred on the dentin in cases of Functionally Graded Endodontic Prefabricated Post (FGEPP), and EPP-homogenous was carried out. After that, the sub-problem approximation method was adopted for determining the optimum material gradient for a FGEPP.
- 5 November 2018
- Published by Trans Tech Publications, Ltd. in Journal of Biomimetics, Biomaterials and Biomedical Engineering
- Vol. 39, 24-39
Determination of the Optimum Material Gradient for a Functionally Graded Endodontic Prefabricated Post Using a Sub-Problem Approximation Method
The treatment process of a tooth every short period has many disadvantages to the dental patient, for instance, wasting time, losing money, and tiring the dental patient. Therefore, selecting the suitable technique for treating the tooth, with increasing the lifetime of the tooth has become more necessary in the daily life of the dental scientists. In the present days, an Endodontic Prefabricated Post (EPP) plays an important vital role in the treatment process of the tooth. Comparisons among von Mises stress, shear stress, and deformation of homogenous cases were investigated in the present work through the finite element analysis (FEA). The effect of EPP material on von Mises stress, shear stress, and deformation components occurred on the dentin in cases of Functionally Graded Endodontic Prefabricated Post (FGEPP), and EPP-homogenous was carried out. After that, the sub-problem approximation method was adopted for determining the optimum material gradient for a FGEPP.
- 19 January 2018
- Published by Trans Tech Publications, Ltd. in Journal of Biomimetics, Biomaterials and Biomedical Engineering
- Vol. 35, 50-66
Determination of the Optimum Material for an Endodontic Prefabricated Post Using a Sub-Problem Approximation Method
The success in the chewing process depends on the performance of the tooth used. Actually, taking care of the tooth and improving its performance can change our life. Therefore, the treatment process of the teeth has become more necessary in the life of a dental patient. Nowadays, a post plays an important vital role in this process. In the present work, analysis of the effect of the post material on the performances of the components of endodontically treated teeth (ETT) was carried out through the finite element analysis (FEA). The effects of post material on the von Mises stress component (Svon), shear stress, and displacement component (Usum) occurred on the all components of ETT were investigated. After that, the determination of the optimum material for an endodontic prefabricated post (EPP) was investigated through the sub-problem approximation method.
- 19 January 2018
- Published by Trans Tech Publications, Ltd. in Journal of Biomimetics, Biomaterials and Biomedical Engineering
- Vol. 35, 50-66
Determination of the Optimum Material for an Endodontic Prefabricated Post Using a Sub-Problem Approximation Method
The success in the chewing process depends on the performance of the tooth used. Actually, taking care of the tooth and improving its performance can change our life. Therefore, the treatment process of the teeth has become more necessary in the life of a dental patient. Nowadays, a post plays an important vital role in this process. In the present work, analysis of the effect of the post material on the performances of the components of endodontically treated teeth (ETT) was carried out through the finite element analysis (FEA). The effects of post material on the von Mises stress component (Svon), shear stress, and displacement component (Usum) occurred on the all components of ETT were investigated. After that, the determination of the optimum material for an endodontic prefabricated post (EPP) was investigated through the sub-problem approximation method.