Zhengdong Lei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhengdong Lei has a total of 109 co-authors. Here are the top co-authors by number of shared publications:
- Pengcheng Liu
School of Energy Resources, China University of Geosciences (Beijing), Beijing 100083, China
6 shared publications Yishan Liu
Research Institute of Petroleum Exploration and Development, PetroChina 1 , Beijing 100083
6 shared publications- Yuhan Wang
Research Institute of Petroleum Exploration and Development, PetroChina 1 , Beijing 100083
6 shared publications - Dongqi Ji
Research Institute of Petroleum Exploration and Development, PetroChina 1 , Beijing 100083
5 shared publications - Yishan Liu
Research Institute of Petroleum Exploration and Development, PetroChina
5 shared publications Xiaomei Zhou
Research Institute of Petroleum Exploration and Development, PetroChina 1 , Beijing 100083
4 shared publications
Latest Publications
- 1 October 2026
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- p. 1-15
The Hydrophobic Interactions Under Salt Ion Regulation: From Oil/Rock Interactions to Enhanced Oil Recovery via Imbibition
Summary: Hydrophobic interactions play a crucial role in various fields, such as oil and gas development, biology, medicine, and food science. The mechanisms and regulation of hydrophobic interactions have long been frontier topics in colloid and interface science, as well as soft matter science. In recent years, there has been considerable debate regarding the patterns of ion influence on hydrophobic interactions and the underlying regulatory mechanisms. Given the importance and prevalence of hydrophobic interactions between crude oil and hydrophobic pore surfaces in reservoir environments, an in-depth understanding of the regulatory mechanisms of ions in formation water on hydrophobic interactions is crucial for improving oil recovery techniques in unconventional reservoirs. This study combines nanomechanical measurement and physical and molecular simulations to conduct a collaborative investigation. The results show that the intensity of hydrophobic interactions at the oil/hydrophobic interface increases by two to three times with the increase in salinity, and the characteristic decay length of the interaction doubles, leading to a significant increase in both the amount and thickness of the oil film adhered to the hydrophobic pore surface. This causes a reduction of more than 10% reduction in oil recovery during coreflooding experiments. The coreflooding results were obtained under laboratory conditions with pressure gradients ranging from 480 psi/ft to 1,315 psi/ft. Further research reveals that the difference in salinity between the oil/hydrophobic interface and the bulk phase augments with the increase in salinity in the bulk phase and is the main reason for the enhancement of hydrophobic interactions. Compared with the bulk phase, the formation of stable hydrated ions is more difficult in the confined spaces between oil and the hydrophobic surface, where water molecules exhibit a relatively ordered arrangement. Second, hydrated ions have more diverse structures and higher configurational entropy in the bulk phase than in confined spaces. This difference becomes more pronounced in high-salinity systems, where the Gibbs free energy required for hydrated-ion formation increases. These two factors synergistically cause the ion concentration in the confined spaces between hydrophobic surfaces to be much lower than in the bulk phase, and the resulting osmotic pressure leads to a tendency for fluid expulsion from the confined space, which macroscopically manifests as enhanced hydrophobic forces and more significant oil adhesion. This study clarifies why oil displacement efficiency decreases under high-salinity conditions and provides molecular-scale mechanisms and thermodynamic theoretical support for optimizing ion composition in smartwater flooding.
- 1 October 2026
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- p. 1-15
The Hydrophobic Interactions Under Salt Ion Regulation: From Oil/Rock Interactions to Enhanced Oil Recovery via Imbibition
Summary: Hydrophobic interactions play a crucial role in various fields, such as oil and gas development, biology, medicine, and food science. The mechanisms and regulation of hydrophobic interactions have long been frontier topics in colloid and interface science, as well as soft matter science. In recent years, there has been considerable debate regarding the patterns of ion influence on hydrophobic interactions and the underlying regulatory mechanisms. Given the importance and prevalence of hydrophobic interactions between crude oil and hydrophobic pore surfaces in reservoir environments, an in-depth understanding of the regulatory mechanisms of ions in formation water on hydrophobic interactions is crucial for improving oil recovery techniques in unconventional reservoirs. This study combines nanomechanical measurement and physical and molecular simulations to conduct a collaborative investigation. The results show that the intensity of hydrophobic interactions at the oil/hydrophobic interface increases by two to three times with the increase in salinity, and the characteristic decay length of the interaction doubles, leading to a significant increase in both the amount and thickness of the oil film adhered to the hydrophobic pore surface. This causes a reduction of more than 10% reduction in oil recovery during coreflooding experiments. The coreflooding results were obtained under laboratory conditions with pressure gradients ranging from 480 psi/ft to 1,315 psi/ft. Further research reveals that the difference in salinity between the oil/hydrophobic interface and the bulk phase augments with the increase in salinity in the bulk phase and is the main reason for the enhancement of hydrophobic interactions. Compared with the bulk phase, the formation of stable hydrated ions is more difficult in the confined spaces between oil and the hydrophobic surface, where water molecules exhibit a relatively ordered arrangement. Second, hydrated ions have more diverse structures and higher configurational entropy in the bulk phase than in confined spaces. This difference becomes more pronounced in high-salinity systems, where the Gibbs free energy required for hydrated-ion formation increases. These two factors synergistically cause the ion concentration in the confined spaces between hydrophobic surfaces to be much lower than in the bulk phase, and the resulting osmotic pressure leads to a tendency for fluid expulsion from the confined space, which macroscopically manifests as enhanced hydrophobic forces and more significant oil adhesion. This study clarifies why oil displacement efficiency decreases under high-salinity conditions and provides molecular-scale mechanisms and thermodynamic theoretical support for optimizing ion composition in smartwater flooding.
- 1 August 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (8)
Phase behavior and flow mechanisms of CO2–hydrocarbon under nanoconfinement in shale nanopores
With the large-scale deployment of carbon capture, utilization, and storage, CO2 has been widely applied for enhanced oil recovery in shale reservoirs. However, strong nanoconfinement in shale nanopores induces CO2–hydrocarbon phase behavior and transport mechanisms that cannot be adequately described by conventional theories or microscale experiments. To address this issue, an integrated framework combining theoretical development, experimental emulation, and numerical modeling is established to investigate phase behavior and transport in shale 15 nanopores. A gas–liquid–adsorbed three-phase equilibrium algorithm is developed based on thermodynamic principles and coupled with a simplified local density functional theory to characterize adsorption under confinement. Meanwhile, a customized nano-microfluidic platform is constructed, including single-scale nanopores of 150, 80, and 10 nm and dual-scale nanopores with orthogonal staggered channels of 150 and 10 nm depth, enabling direct visualization and validation of nanoconfined phase transitions and flow behavior. Results show that decreasing pore size markedly contracts the gas–liquid two-phase envelope, lowers bubble point pressure, raises dew point pressure, and suppresses critical condensation pressure and temperature. Stronger confinement also promotes preferential adsorption of heavier components on pore walls while retaining lighter components in the bulk phase. In dual-scale nanopores, gas bubbles nucleate first in larger pores, and transition pathways are strongly controlled by gas–oil ratio. Finally, a nanoconfinement-enabled multiphase multiscale flow model is implemented in MATLAB Reservoir Simulation Toolbox, incorporating phase equilibrium and interphase mass transfer to predict CO2–hydrocarbon phase behavior and transport in shale nanopores.
- 1 August 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (8)
Phase behavior and flow mechanisms of CO2–hydrocarbon under nanoconfinement in shale nanopores
With the large-scale deployment of carbon capture, utilization, and storage, CO2 has been widely applied for enhanced oil recovery in shale reservoirs. However, strong nanoconfinement in shale nanopores induces CO2–hydrocarbon phase behavior and transport mechanisms that cannot be adequately described by conventional theories or microscale experiments. To address this issue, an integrated framework combining theoretical development, experimental emulation, and numerical modeling is established to investigate phase behavior and transport in shale 15 nanopores. A gas–liquid–adsorbed three-phase equilibrium algorithm is developed based on thermodynamic principles and coupled with a simplified local density functional theory to characterize adsorption under confinement. Meanwhile, a customized nano-microfluidic platform is constructed, including single-scale nanopores of 150, 80, and 10 nm and dual-scale nanopores with orthogonal staggered channels of 150 and 10 nm depth, enabling direct visualization and validation of nanoconfined phase transitions and flow behavior. Results show that decreasing pore size markedly contracts the gas–liquid two-phase envelope, lowers bubble point pressure, raises dew point pressure, and suppresses critical condensation pressure and temperature. Stronger confinement also promotes preferential adsorption of heavier components on pore walls while retaining lighter components in the bulk phase. In dual-scale nanopores, gas bubbles nucleate first in larger pores, and transition pathways are strongly controlled by gas–oil ratio. Finally, a nanoconfinement-enabled multiphase multiscale flow model is implemented in MATLAB Reservoir Simulation Toolbox, incorporating phase equilibrium and interphase mass transfer to predict CO2–hydrocarbon phase behavior and transport in shale nanopores.
- Open Access
- 28 July 2026
- Published by Elsevier in Energy Reports
- Vol. 16
A hybrid MLP-CNN-transformer architecture for high-accuracy dynamic production forecasting in shale oil
- 28 July 2026
- Published by Elsevier in Energy Reports
- Vol. 16
Open AccessA hybrid MLP-CNN-transformer architecture for high-accuracy dynamic production forecasting in shale oil
- 30 June 2026
- Published by Springer Nature
- p. 562-581
Microscopic Pore Structure Characteristics and Oil Transport in Nanoscale Shale
- 30 June 2026
- Published by Springer Nature
- p. 562-581
Microscopic Pore Structure Characteristics and Oil Transport in Nanoscale Shale
- Open Access
- 28 April 2026
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 14, 1769844
Review of characterization methods for shale wettability: advances, applications, and future perspectives
Wettability significantly controls fluid distribution and mobility in shale reservoirs. Accurate characterization enables better reservoir management and improves shale oil recovery. This review systematically summarizes wettability characterization methods across four sample scales: core thin sections, core plugs, crushed rock samples, and digital cores. It aims to compare their advantages, limitations, and practical applicability. We analyze established techniques such as contact angle measurement and spontaneous imbibition, highlighting how integration with advanced imaging and NMR enhances their reliability. The review also examines emerging nanoscale characterization techniques (Atomic force microscopy, AFM; molecular dynamics, MD simulations) are examined to reveal the link between molecular-scale and macroscopic wettability in shale. We systematically compare the advantages and constraints of all approaches. Notably, no single method can fully capture the complex, mixed-wet behavior of shale. Our analysis considers that a multi-scale framework is essential. Such an approach combines complementary techniques and validates simulations with experimental data. This strategy improves the characterization of wettability heterogeneity and its dynamic evolution. Looking forward, we highlight the need for in-situ dynamic monitoring, integration of artificial intelligence, and standardized protocols for continental shale. These advances will support more accurate reservoir evaluation and optimized recovery strategies.
- 28 April 2026
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 14, 1769844
Open AccessReview of characterization methods for shale wettability: advances, applications, and future perspectives
Wettability significantly controls fluid distribution and mobility in shale reservoirs. Accurate characterization enables better reservoir management and improves shale oil recovery. This review systematically summarizes wettability characterization methods across four sample scales: core thin sections, core plugs, crushed rock samples, and digital cores. It aims to compare their advantages, limitations, and practical applicability. We analyze established techniques such as contact angle measurement and spontaneous imbibition, highlighting how integration with advanced imaging and NMR enhances their reliability. The review also examines emerging nanoscale characterization techniques (Atomic force microscopy, AFM; molecular dynamics, MD simulations) are examined to reveal the link between molecular-scale and macroscopic wettability in shale. We systematically compare the advantages and constraints of all approaches. Notably, no single method can fully capture the complex, mixed-wet behavior of shale. Our analysis considers that a multi-scale framework is essential. Such an approach combines complementary techniques and validates simulations with experimental data. This strategy improves the characterization of wettability heterogeneity and its dynamic evolution. Looking forward, we highlight the need for in-situ dynamic monitoring, integration of artificial intelligence, and standardized protocols for continental shale. These advances will support more accurate reservoir evaluation and optimized recovery strategies.
- 2 March 2026
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 31 (05) , 3216-3237
Pore-Scale Wettability Alteration and Optimal Interfacial Tension Synergy in Enhanced Tight Oil Imbibition
Summary: Pressure supplementation before fracturing operations refers to the technical measure conducted before the main fracturing or the next stage of staged fracturing, where chemical systems are preinjected to improve rock wettability and reduce interfacial tension (IFT), thereby stabilizing the formation pressure at its original level. By doing so, it enhances the overall dynamic behavior of the reservoir, thereby improving fracturing stimulation effectiveness and increasing matrix recovery rates through enhanced imbibition. The change in wettability from oil-wet to water-wet and the decrease in IFT are usually regarded as the main imbibition mechanisms. However, the effect of pore size on wettability change and the optimal range of IFT for imbibition remain unclear. In this paper, based on nuclear magnetic resonance (NMR) imbibition experiments, we investigate the interfacial interactions between different imbibition fluids and cores with different mineral compositions, as well as the enhanced imbibition mechanism, from the perspectives of pore wettability changes and optimal IFT ranges. The contribution of various influencing factors to imbibition recovery is also analyzed. The mineral component differences between shale and tight sandstone make them, respectively, exhibit oil-wet and weakly water-wet properties. Spontaneous imbibition mainly occurs in relatively small pores, showing mixed wettability. As the pore radius increases, the pores become more oil-wet. The crude oil displaced by the imbibition of shale and tight cores mainly comes from small pores, with contribution degrees reaching 53.3% to 60.7% and 39.1% to 72.2%, respectively. After enhanced imbibition, the wettability alteration degrees of micropores, small pores, and mesopores in the core gradually decrease, and the corresponding imbibition efficiency gradually decreases. The wettability change in the small pore range (10–100 nm) has a greater impact on the imbibition recovery rate, which is conducive to the precise assessment of tight oil production. The optimal IFT ranges corresponding to shale and tight sandstone are 0.09~6.90 mN/m and 0.12~9.40 mN/m, respectively. Petroleum sulfonates and nanofluids achieve optimal imbibition recovery by synergistically reducing contact angles to 88.8°) and rely on inefficient gravity drainage in oil-wet mesopores, limiting small-pore efficiency to 39~60%. The weight coefficients of the factors influencing the enhanced imbibition of tight oil are as follows: core characteristic value > wettability > IFT. The physical properties of the reservoir itself are the fundamental restrictive factors for the imbibition effect. Wettability affects the capillary force direction and the imbibition recovery rate. IFT should be optimized in coordination with other factors. Pursuing ultralow IFT alone may have limited effects. The research results of this paper are helpful for designing scientific enhanced oil recovery (EOR) strategies in tight oil reservoirs.
- 2 March 2026
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 31 (05) , 3216-3237
Pore-Scale Wettability Alteration and Optimal Interfacial Tension Synergy in Enhanced Tight Oil Imbibition
Summary: Pressure supplementation before fracturing operations refers to the technical measure conducted before the main fracturing or the next stage of staged fracturing, where chemical systems are preinjected to improve rock wettability and reduce interfacial tension (IFT), thereby stabilizing the formation pressure at its original level. By doing so, it enhances the overall dynamic behavior of the reservoir, thereby improving fracturing stimulation effectiveness and increasing matrix recovery rates through enhanced imbibition. The change in wettability from oil-wet to water-wet and the decrease in IFT are usually regarded as the main imbibition mechanisms. However, the effect of pore size on wettability change and the optimal range of IFT for imbibition remain unclear. In this paper, based on nuclear magnetic resonance (NMR) imbibition experiments, we investigate the interfacial interactions between different imbibition fluids and cores with different mineral compositions, as well as the enhanced imbibition mechanism, from the perspectives of pore wettability changes and optimal IFT ranges. The contribution of various influencing factors to imbibition recovery is also analyzed. The mineral component differences between shale and tight sandstone make them, respectively, exhibit oil-wet and weakly water-wet properties. Spontaneous imbibition mainly occurs in relatively small pores, showing mixed wettability. As the pore radius increases, the pores become more oil-wet. The crude oil displaced by the imbibition of shale and tight cores mainly comes from small pores, with contribution degrees reaching 53.3% to 60.7% and 39.1% to 72.2%, respectively. After enhanced imbibition, the wettability alteration degrees of micropores, small pores, and mesopores in the core gradually decrease, and the corresponding imbibition efficiency gradually decreases. The wettability change in the small pore range (10–100 nm) has a greater impact on the imbibition recovery rate, which is conducive to the precise assessment of tight oil production. The optimal IFT ranges corresponding to shale and tight sandstone are 0.09~6.90 mN/m and 0.12~9.40 mN/m, respectively. Petroleum sulfonates and nanofluids achieve optimal imbibition recovery by synergistically reducing contact angles to 88.8°) and rely on inefficient gravity drainage in oil-wet mesopores, limiting small-pore efficiency to 39~60%. The weight coefficients of the factors influencing the enhanced imbibition of tight oil are as follows: core characteristic value > wettability > IFT. The physical properties of the reservoir itself are the fundamental restrictive factors for the imbibition effect. Wettability affects the capillary force direction and the imbibition recovery rate. IFT should be optimized in coordination with other factors. Pursuing ultralow IFT alone may have limited effects. The research results of this paper are helpful for designing scientific enhanced oil recovery (EOR) strategies in tight oil reservoirs.
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Multiscale fluid–solid coupling analysis for nano-to-micro scale shale based on homogenization theory: A proof-of-concept study
Shale reservoirs, characterized by abundant reserves and predominantly nano-scale pores and fractures, represent critical sources of unconventional oil and gas production. However, accurately capturing deformation behaviors of nano-to-micro-scale pore–fracture systems and describing microscale fluid–solid coupling phenomena under in situ stress remains challenging. In this study, we propose a homogenization-based approach to upscale micro-scale mechanical deformation and fluid flow results to the mesoscopic (core) scale, establishing effective fluid–solid coupling equations consistent with Biot's framework. Equivalent parameters are explicitly derived through three analytical expressions. Integrating centrifugal-nuclear magnetic resonance) and microfluidic experiments to characterize nano-confinement effects, simulation results indicate that, within the elastic deformation stage, the lower bound of producible oil in shale decreases from 20 to 16.19 nm. For organic pores, the minimum apparent permeability increases from 1.29×10−5 to 1.86×10−5 mD and the maximum from 2.97×10−3 to 4.34×10−3 mD, with the nonlinear flow regime boundary shifting from 90 to 73 nm. Inorganic pores exhibit negligible stress-induced deformation. Moreover, storage and Biot coefficients (αeff, γeff) increase with pore–fracture porosity. The effective elastic modulus (aeff) varies significantly across reservoir types, with felsic shale exhibiting higher stiffness than clay-rich shale. Accordingly, the degree of fluid–solid coupling follows the order: quartz < feldspar < clay minerals < organic matter. For apparent permeability, small pores influence under a serial configuration, while large pores govern under parallel. Crude oil flow in complex nanopore networks depends on organic matter distribution, whereas multi-mineral interactions are dictated by bulk elastic modulus and Poisson's ratio.
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Multiscale fluid–solid coupling analysis for nano-to-micro scale shale based on homogenization theory: A proof-of-concept study
Shale reservoirs, characterized by abundant reserves and predominantly nano-scale pores and fractures, represent critical sources of unconventional oil and gas production. However, accurately capturing deformation behaviors of nano-to-micro-scale pore–fracture systems and describing microscale fluid–solid coupling phenomena under in situ stress remains challenging. In this study, we propose a homogenization-based approach to upscale micro-scale mechanical deformation and fluid flow results to the mesoscopic (core) scale, establishing effective fluid–solid coupling equations consistent with Biot's framework. Equivalent parameters are explicitly derived through three analytical expressions. Integrating centrifugal-nuclear magnetic resonance) and microfluidic experiments to characterize nano-confinement effects, simulation results indicate that, within the elastic deformation stage, the lower bound of producible oil in shale decreases from 20 to 16.19 nm. For organic pores, the minimum apparent permeability increases from 1.29×10−5 to 1.86×10−5 mD and the maximum from 2.97×10−3 to 4.34×10−3 mD, with the nonlinear flow regime boundary shifting from 90 to 73 nm. Inorganic pores exhibit negligible stress-induced deformation. Moreover, storage and Biot coefficients (αeff, γeff) increase with pore–fracture porosity. The effective elastic modulus (aeff) varies significantly across reservoir types, with felsic shale exhibiting higher stiffness than clay-rich shale. Accordingly, the degree of fluid–solid coupling follows the order: quartz < feldspar < clay minerals < organic matter. For apparent permeability, small pores influence under a serial configuration, while large pores govern under parallel. Crude oil flow in complex nanopore networks depends on organic matter distribution, whereas multi-mineral interactions are dictated by bulk elastic modulus and Poisson's ratio.
- 1 April 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (4)
Fracturing fluid–rock interaction and pore structure evolution in shale oil reservoirs
Hydraulic fracturing has significantly advanced shale oil extraction, yet the long-term effects of fracturing fluids on pore structure remain inadequately understood. This study marks the first quantitative evaluation of the pore structure evolution induced by the fracturing fluid–rock interaction. The mineral composition, pore types, morphology, pore size distribution (PSD), pore volume (PV), and specific surface area (SSA) for the pre- or post-treatment shale samples were measured and compared through a series of experiments, including x-ray diffraction, large-field scanning electron microscopy, focused ion beam scanning electron microscopy, field emission scanning electron microscopy, micro-computed tomography (μCT), gas adsorption, and high-pressure mercury injection. The results reveal that fracturing fluids induce mineralogical and structural modifications. After treatment, the carbonate mineral content decreased from 60.19% to 56.00%, while the clay mineral content increased from 11.72% to 15.66%. Pore structure analysis revealed the development of microfractures, inorganic pores, and organic pores, each exhibiting multi-morphological and multi-scale characteristics. Post-treatment observations showed the emergence of dissolution pores and the opening of microfractures. However, these benefits were offset by mineral detachment, migration, and water–rock interactions. According to the full-scale PSD, micropores (50 nm) account for 4%, 44%, and 52% of the total volume, respectively. The measured results in this work suggested that the total PV and SSA of treated samples decreased by 29.6% and 46.8%. These findings provide critical insight into the long-term implications of hydraulic fracturing on reservoir quality and hydrocarbon flow efficiency.
- 1 April 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (4)
Fracturing fluid–rock interaction and pore structure evolution in shale oil reservoirs
Hydraulic fracturing has significantly advanced shale oil extraction, yet the long-term effects of fracturing fluids on pore structure remain inadequately understood. This study marks the first quantitative evaluation of the pore structure evolution induced by the fracturing fluid–rock interaction. The mineral composition, pore types, morphology, pore size distribution (PSD), pore volume (PV), and specific surface area (SSA) for the pre- or post-treatment shale samples were measured and compared through a series of experiments, including x-ray diffraction, large-field scanning electron microscopy, focused ion beam scanning electron microscopy, field emission scanning electron microscopy, micro-computed tomography (μCT), gas adsorption, and high-pressure mercury injection. The results reveal that fracturing fluids induce mineralogical and structural modifications. After treatment, the carbonate mineral content decreased from 60.19% to 56.00%, while the clay mineral content increased from 11.72% to 15.66%. Pore structure analysis revealed the development of microfractures, inorganic pores, and organic pores, each exhibiting multi-morphological and multi-scale characteristics. Post-treatment observations showed the emergence of dissolution pores and the opening of microfractures. However, these benefits were offset by mineral detachment, migration, and water–rock interactions. According to the full-scale PSD, micropores (50 nm) account for 4%, 44%, and 52% of the total volume, respectively. The measured results in this work suggested that the total PV and SSA of treated samples decreased by 29.6% and 46.8%. These findings provide critical insight into the long-term implications of hydraulic fracturing on reservoir quality and hydrocarbon flow efficiency.
- 1 March 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (3)
Imbibition effect model of shale and tight sandstone from mineral composition and fractal pore structure
Pre-pressure energy storage to enhance imbibition is a key technology to improve the production efficiency of tight oil and shale oil in matrix pores, but the mechanism of pore structure and mineral composition on imbibition is still unclear. In this paper, the imbibition behavior of shale and tight sandstone is compared from the perspective of mineral composition and fractal pore structure, and a prediction model of the enhanced imbibition effect is established. Feldspar accounts for 67.7% of the shale, and the micromorphology of shale is mainly intergranular pores, feldspar dissolution pores, and tubular throats. The proportion of quartz and clay in tight sandstone is 70.8% and 16.8%, respectively. The compaction and cementation of quartz and the irregular distribution of clay minerals increase the complexity of pore structure. The pore and throat distribution of shale core is more concentrated, while the pore and throat distribution of tight sandstone is wider, less frequent and more heterogeneous. The calculated average imbibition index Qk of shale and tight sandstone is 0.0128 and 0.0082, respectively. The pore structure of shale is more conducive to imbibition. The modified Qmk value of shale is in the range of 0.0015–0.0081, and the final imbibition efficiency is in the range of 22.12% to 37.61%. The Qmk value of tight sandstone ranges from 0.0010 to 0.0052, and the final imbibition efficiency ranges from 15.35% to 32.28%. The research content of this paper is helpful to deepen the understanding of enhanced imbibition from the perspective of fractal pore structure and mineral composition.
- 1 March 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (3)
Imbibition effect model of shale and tight sandstone from mineral composition and fractal pore structure
Pre-pressure energy storage to enhance imbibition is a key technology to improve the production efficiency of tight oil and shale oil in matrix pores, but the mechanism of pore structure and mineral composition on imbibition is still unclear. In this paper, the imbibition behavior of shale and tight sandstone is compared from the perspective of mineral composition and fractal pore structure, and a prediction model of the enhanced imbibition effect is established. Feldspar accounts for 67.7% of the shale, and the micromorphology of shale is mainly intergranular pores, feldspar dissolution pores, and tubular throats. The proportion of quartz and clay in tight sandstone is 70.8% and 16.8%, respectively. The compaction and cementation of quartz and the irregular distribution of clay minerals increase the complexity of pore structure. The pore and throat distribution of shale core is more concentrated, while the pore and throat distribution of tight sandstone is wider, less frequent and more heterogeneous. The calculated average imbibition index Qk of shale and tight sandstone is 0.0128 and 0.0082, respectively. The pore structure of shale is more conducive to imbibition. The modified Qmk value of shale is in the range of 0.0015–0.0081, and the final imbibition efficiency is in the range of 22.12% to 37.61%. The Qmk value of tight sandstone ranges from 0.0010 to 0.0052, and the final imbibition efficiency ranges from 15.35% to 32.28%. The research content of this paper is helpful to deepen the understanding of enhanced imbibition from the perspective of fractal pore structure and mineral composition.
- Open Access
- 21 January 2025
- Published by Wiley in International Journal of Energy Research
- Vol. 2025 (1)
A Multiphase and Multicomponent Model Considering Molecular Diffusion for Simulating Shale Oil Reservoirs With Complex Fracture Networks
Molecular diffusion is a critical mechanism of enhance oil recovery (EOR) in developing shale oil reservoir by huff “n” puff. The ultra‐low permeability lead to the accumulation of injected gas within the complex fracture networks (CFNs), thereby, enhancing concentration gradient and mass transfer by molecular diffusion between the CFNs and matrix. A proper understanding of CFNs influence on molecular diffusive mass transfer becomes critical for predicting oil recovery and remaining oil distribution in shale oil reservoirs. Therefore, a multiphase and multicomponent mathematical model with molecular diffusion was developed for describing mass transfer of molecular diffusion. Molecular diffusion coefficients were predicted by the extend Sigmund method. The finite volume method (FVM) and two‐point flux approximation (TPFA) were applied to discretize and approximate mass transfer equations. The embedded discrete fracture model (EDFM) was utilized to explicitly simulate CFNs and extended to couple mass transfer by molecular diffusion in the fracture to that in the matrix. Model validation clearly demonstrates that the proposed numerical model is capable of effectively and accurately simulating diffusion mass transfer in shale oil reservoirs with CFNs. By applying the proposed numerical compositional model, a series of synthetical models with molecular diffusion were developed by CO 2 huff “n” puff. The simulation results indicated that molecular diffusion is crucial to EOR in developing shale oil reservoirs with CFNs by huff “n” puff, particularly in the injection and soaking stage. However, molecular diffusion contributes to an increased gas production during the production phase. In addition, larger fracture density benefits diffusive mass transfer to EOR by increasing contact areas. And higher diffusion coefficients improve diffusive mobility, which boosts diffusive mass transfer. Meanwhile, greater injection rate additionally makes concentration difference of injected component between fractures and matrix system to rise, resulting in more injected component transferring into matrix. This paper provides a better understanding of molecular diffusion mechanism for EOR in development shale oil reservoirs with CFNs by huff “n” puff.
- 21 January 2025
- Published by Wiley in International Journal of Energy Research
- Vol. 2025 (1)
Open AccessA Multiphase and Multicomponent Model Considering Molecular Diffusion for Simulating Shale Oil Reservoirs With Complex Fracture Networks
Molecular diffusion is a critical mechanism of enhance oil recovery (EOR) in developing shale oil reservoir by huff “n” puff. The ultra‐low permeability lead to the accumulation of injected gas within the complex fracture networks (CFNs), thereby, enhancing concentration gradient and mass transfer by molecular diffusion between the CFNs and matrix. A proper understanding of CFNs influence on molecular diffusive mass transfer becomes critical for predicting oil recovery and remaining oil distribution in shale oil reservoirs. Therefore, a multiphase and multicomponent mathematical model with molecular diffusion was developed for describing mass transfer of molecular diffusion. Molecular diffusion coefficients were predicted by the extend Sigmund method. The finite volume method (FVM) and two‐point flux approximation (TPFA) were applied to discretize and approximate mass transfer equations. The embedded discrete fracture model (EDFM) was utilized to explicitly simulate CFNs and extended to couple mass transfer by molecular diffusion in the fracture to that in the matrix. Model validation clearly demonstrates that the proposed numerical model is capable of effectively and accurately simulating diffusion mass transfer in shale oil reservoirs with CFNs. By applying the proposed numerical compositional model, a series of synthetical models with molecular diffusion were developed by CO 2 huff “n” puff. The simulation results indicated that molecular diffusion is crucial to EOR in developing shale oil reservoirs with CFNs by huff “n” puff, particularly in the injection and soaking stage. However, molecular diffusion contributes to an increased gas production during the production phase. In addition, larger fracture density benefits diffusive mass transfer to EOR by increasing contact areas. And higher diffusion coefficients improve diffusive mobility, which boosts diffusive mass transfer. Meanwhile, greater injection rate additionally makes concentration difference of injected component between fractures and matrix system to rise, resulting in more injected component transferring into matrix. This paper provides a better understanding of molecular diffusion mechanism for EOR in development shale oil reservoirs with CFNs by huff “n” puff.